diff options
Diffstat (limited to 'Documentation/devicetree/bindings/soc')
4 files changed, 133 insertions, 7 deletions
diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml new file mode 100644 index 000000000000..e2b788796e79 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +# Copyright 2020 Antmicro <www.antmicro.com> +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/litex/litex,soc-controller.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: LiteX SoC Controller driver + +description: | + This is the SoC Controller driver for the LiteX SoC Builder. + Its purpose is to verify LiteX CSR (Control&Status Register) access + operations and provide functions for other drivers to read/write CSRs + and to check if those accessors are ready to be used. + +maintainers: + - Karol Gugala <kgugala@antmicro.com> + - Mateusz Holenko <mholenko@antmicro.com> + +properties: + compatible: + const: litex,soc-controller + + reg: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + soc_ctrl0: soc-controller@f0000000 { + compatible = "litex,soc-controller"; + reg = <0xf0000000 0xc>; + status = "okay"; + }; + +... diff --git a/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml b/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml new file mode 100644 index 000000000000..6c763f873a63 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# # Copyright 2020 MediaTek Inc. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/mediatek/devapc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediaTek Device Access Permission Control driver + +description: | + MediaTek bus fabric provides TrustZone security support and data + protection to prevent slaves from being accessed by unexpected masters. + The security violation is logged and sent to the processor for further + analysis and countermeasures. + +maintainers: + - Neal Liu <neal.liu@mediatek.com> + +properties: + compatible: + enum: + - mediatek,mt6779-devapc + + reg: + description: The base address of devapc register bank + maxItems: 1 + + interrupts: + description: A single interrupt specifier + maxItems: 1 + + clocks: + description: Contains module clock source and clock names + maxItems: 1 + + clock-names: + description: Names of the clocks list in clocks property + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt6779-clk.h> + + devapc: devapc@10207000 { + compatible = "mediatek,mt6779-devapc"; + reg = <0x10207000 0x1000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg_ao CLK_INFRA_DEVICE_APC>; + clock-names = "devapc-infra-clock"; + }; diff --git a/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml new file mode 100644 index 000000000000..378d0ced43c8 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/xilinx/xlnx,vcu-settings.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx VCU Settings + +maintainers: + - Michael Tretter <kernel@pengutronix.de> + +description: | + The Xilinx VCU Settings provides information about the configuration of the + video codec unit. + +properties: + compatible: + items: + - const: xlnx,vcu-settings + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + xlnx_vcu: vcu@a0041000 { + compatible = "xlnx,vcu-settings", "syscon"; + reg = <0x0 0xa0041000 0x0 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt index 6786d6715df0..2417b13ba468 100644 --- a/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt +++ b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt @@ -12,10 +12,7 @@ Required properties: - compatible: shall be one of: "xlnx,vcu" "xlnx,vcu-logicoreip-1.0" -- reg, reg-names: There are two sets of registers need to provide. - 1. vcu slcr - 2. Logicore - reg-names should contain name for the each register sequence. +- reg : The base offset and size of the VCU_PL_SLCR register space. - clocks: phandle for aclk and pll_ref clocksource - clock-names: The identification string, "aclk", is always required for the axi clock. "pll_ref" is required for pll. @@ -23,9 +20,7 @@ Example: xlnx_vcu: vcu@a0040000 { compatible = "xlnx,vcu-logicoreip-1.0"; - reg = <0x0 0xa0040000 0x0 0x1000>, - <0x0 0xa0041000 0x0 0x1000>; - reg-names = "vcu_slcr", "logicore"; + reg = <0x0 0xa0040000 0x0 0x1000>; clocks = <&si570_1>, <&clkc 71>; clock-names = "pll_ref", "aclk"; }; |