summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/sound/rt5645.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/sound/rt5645.txt')
-rw-r--r--Documentation/devicetree/bindings/sound/rt5645.txt72
1 files changed, 72 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/sound/rt5645.txt b/Documentation/devicetree/bindings/sound/rt5645.txt
new file mode 100644
index 000000000000..7cee1f518f59
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5645.txt
@@ -0,0 +1,72 @@
+RT5650/RT5645 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : One of "realtek,rt5645" or "realtek,rt5650".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+Optional properties:
+
+- hp-detect-gpios:
+ a GPIO spec for the external headphone detect pin. If jd-mode = 0,
+ we will get the JD status by getting the value of hp-detect-gpios.
+
+- realtek,in2-differential
+ Boolean. Indicate MIC2 input are differential, rather than single-ended.
+
+- realtek,dmic1-data-pin
+ 0: dmic1 is not used
+ 1: using IN2P pin as dmic1 data pin
+ 2: using GPIO6 pin as dmic1 data pin
+ 3: using GPIO10 pin as dmic1 data pin
+ 4: using GPIO12 pin as dmic1 data pin
+
+- realtek,dmic2-data-pin
+ 0: dmic2 is not used
+ 1: using IN2N pin as dmic2 data pin
+ 2: using GPIO5 pin as dmic2 data pin
+ 3: using GPIO11 pin as dmic2 data pin
+
+-- realtek,jd-mode : The JD mode of rt5645/rt5650
+ 0 : rt5645/rt5650 JD function is not used
+ 1 : Mode-0 (VDD=3.3V), two port jack detection
+ 2 : Mode-1 (VDD=3.3V), one port jack detection
+ 3 : Mode-2 (VDD=1.8V), one port jack detection
+
+Pins on the device (for linking into audio routes) for RT5645/RT5650:
+
+ * DMIC L1
+ * DMIC R1
+ * DMIC L2
+ * DMIC R2
+ * IN1P
+ * IN1N
+ * IN2P
+ * IN2N
+ * Haptic Generator
+ * HPOL
+ * HPOR
+ * LOUTL
+ * LOUTR
+ * PDM1L
+ * PDM1R
+ * SPOL
+ * SPOR
+
+Example:
+
+codec: rt5650@1a {
+ compatible = "realtek,rt5650";
+ reg = <0x1a>;
+ hp-detect-gpios = <&gpio 19 0>;
+ interrupt-parent = <&gpio>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ realtek,dmic-en = "true";
+ realtek,en-jd-func = "true";
+ realtek,jd-mode = <3>;
+}; \ No newline at end of file