summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/spi/spi-pl022.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/spi/spi-pl022.yaml')
-rw-r--r--Documentation/devicetree/bindings/spi/spi-pl022.yaml165
1 files changed, 165 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
new file mode 100644
index 000000000000..dfb697c69341
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-pl022.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM PL022 SPI controller
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: "spi-controller.yaml#"
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+ properties:
+ compatible:
+ contains:
+ const: arm,pl022
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: arm,pl022
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - enum:
+ - SSPCLK
+ - sspclk
+ - const: apb_pclk
+
+ pl022,autosuspend-delay:
+ description: delay in ms following transfer completion before the
+ runtime power management system suspends the device. A setting of 0
+ indicates no delay and the device will be suspended immediately.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+
+ pl022,rt:
+ description: indicates the controller should run the message pump with realtime
+ priority to minimise the transfer latency on the bus (boolean)
+ type: boolean
+
+ dmas:
+ description:
+ Two or more DMA channel specifiers following the convention outlined
+ in bindings/dma/dma.txt
+ minItems: 2
+ maxItems: 32
+
+ dma-names:
+ description:
+ There must be at least one channel named "tx" for transmit and named "rx"
+ for receive.
+ minItems: 2
+ maxItems: 32
+ additionalItems: true
+ items:
+ - const: rx
+ - const: tx
+
+patternProperties:
+ "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-f]+$":
+ type: object
+ # SPI slave nodes must be children of the SPI master node and can
+ # contain the following properties.
+ properties:
+ pl022,interface:
+ description: SPI interface type
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - enum:
+ - 0 # SPI
+ - 1 # Texas Instruments Synchronous Serial Frame Format
+ - 2 # Microwire (Half Duplex)
+
+ pl022,com-mode:
+ description: Specifies the transfer mode
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - enum:
+ - 0 # interrupt mode
+ - 1 # polling mode
+ - 2 # DMA mode
+ default: 1
+
+ pl022,rx-level-trig:
+ description: Rx FIFO watermark level
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ maximum: 4
+
+ pl022,tx-level-trig:
+ description: Tx FIFO watermark level
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ maximum: 4
+
+ pl022,ctrl-len:
+ description: Microwire interface - Control length
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0x03
+ maximum: 0x1f
+
+ pl022,wait-state:
+ description: Microwire interface - Wait state
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - enum: [ 0, 1 ]
+
+ pl022,duplex:
+ description: Microwire interface - Full/Half duplex
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - enum: [ 0, 1 ]
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ spi@e0100000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0xe0100000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 31 0x4>;
+ dmas = <&dma_controller 23 1>,
+ <&dma_controller 24 0>;
+ dma-names = "rx", "tx";
+
+ m25p80@1 {
+ compatible = "st,m25p80";
+ reg = <1>;
+ spi-max-frequency = <12000000>;
+ spi-cpol;
+ spi-cpha;
+ pl022,interface = <0>;
+ pl022,com-mode = <0x2>;
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ pl022,ctrl-len = <0x11>;
+ pl022,wait-state = <0>;
+ pl022,duplex = <0>;
+ };
+ };
+...