summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/thermal/qcom-tsens.txt')
-rw-r--r--Documentation/devicetree/bindings/thermal/qcom-tsens.txt31
1 files changed, 25 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
index 06195e8f35e2..1d9e8cf61018 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
@@ -1,18 +1,28 @@
* QCOM SoC Temperature Sensor (TSENS)
Required properties:
-- compatible :
- - "qcom,msm8916-tsens" : For 8916 Family of SoCs
- - "qcom,msm8974-tsens" : For 8974 Family of SoCs
- - "qcom,msm8996-tsens" : For 8996 Family of SoCs
+- compatible:
+ Must be one of the following:
+ - "qcom,msm8916-tsens" (MSM8916)
+ - "qcom,msm8974-tsens" (MSM8974)
+ - "qcom,msm8996-tsens" (MSM8996)
+ - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998)
+ - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845)
+ The generic "qcom,tsens-v2" property must be used as a fallback for any SoC
+ with version 2 of the TSENS IP. MSM8996 is the only exception because the
+ generic property did not exist when support was added.
+
+- reg: Address range of the thermal registers.
+ New platforms containing v2.x.y of the TSENS IP must specify the SROT and TM
+ register spaces separately, with order being TM before SROT.
+ See Example 2, below.
-- reg: Address range of the thermal registers
- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
- #qcom,sensors: Number of sensors in tsens block
- Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
nvmem cells
-Example:
+Example 1 (legacy support before a fallback tsens-v2 property was introduced):
tsens: thermal-sensor@900000 {
compatible = "qcom,msm8916-tsens";
reg = <0x4a8000 0x2000>;
@@ -20,3 +30,12 @@ tsens: thermal-sensor@900000 {
nvmem-cell-names = "caldata", "calsel";
#thermal-sensor-cells = <1>;
};
+
+Example 2 (for any platform containing v2 of the TSENS IP):
+tsens0: thermal-sensor@c263000 {
+ compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+ reg = <0xc263000 0x1ff>, /* TM */
+ <0xc222000 0x1ff>; /* SROT */
+ #qcom,sensors = <13>;
+ #thermal-sensor-cells = <1>;
+ };