1 files changed, 0 insertions, 103 deletions
diff --git a/Documentation/devicetree/bindings/video/exynos_dsim.txt b/Documentation/devicetree/bindings/video/exynos_dsim.txt
deleted file mode 100644
index 0be036270661..000000000000
--- a/Documentation/devicetree/bindings/video/exynos_dsim.txt
+++ /dev/null
@@ -1,103 +0,0 @@
-Exynos MIPI DSI Master
-
-Required properties:
-  - compatible: value should be one of the following
-		"samsung,exynos3250-mipi-dsi" /* for Exynos3250/3472 SoCs */
-		"samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
-		"samsung,exynos4415-mipi-dsi" /* for Exynos4415 SoC */
-		"samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
-		"samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */
-  - reg: physical base address and length of the registers set for the device
-  - interrupts: should contain DSI interrupt
-  - clocks: list of clock specifiers, must contain an entry for each required
-    entry in clock-names
-  - clock-names: should include "bus_clk"and "sclk_mipi" entries
-		 the use of "pll_clk" is deprecated
-  - phys: list of phy specifiers, must contain an entry for each required
-    entry in phy-names
-  - phy-names: should include "dsim" entry
-  - vddcore-supply: MIPI DSIM Core voltage supply (e.g. 1.1V)
-  - vddio-supply: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V)
-  - samsung,pll-clock-frequency: specifies frequency of the oscillator clock
-  - #address-cells, #size-cells: should be set respectively to <1> and <0>
-    according to DSI host bindings (see MIPI DSI bindings [1])
-
-Optional properties:
-  - power-domains: a phandle to DSIM power domain node
-
-Child nodes:
-  Should contain DSI peripheral nodes (see MIPI DSI bindings [1]).
-
-Video interfaces:
-  Device node can contain video interface port nodes according to [2].
-  The following are properties specific to those nodes:
-
-  port node inbound:
-    - reg: (required) must be 0.
-  port node outbound:
-    - reg: (required) must be 1.
-
-  endpoint node connected from mic node (reg = 0):
-    - remote-endpoint: specifies the endpoint in mic node. This node is required
-		       for Exynos5433 mipi dsi. So mic can access to panel node
-		       thoughout this dsi node.
-  endpoint node connected to panel node (reg = 1):
-    - remote-endpoint: specifies the endpoint in panel node. This node is
-		       required in all kinds of exynos mipi dsi to represent
-		       the connection between mipi dsi and panel.
-    - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst
-      mode
-    - samsung,esc-clock-frequency: specifies DSI frequency in escape mode
-
-[1]: Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt
-[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-	dsi@11C80000 {
-		compatible = "samsung,exynos4210-mipi-dsi";
-		reg = <0x11C80000 0x10000>;
-		interrupts = <0 79 0>;
-		clocks = <&clock 286>, <&clock 143>;
-		clock-names = "bus_clk", "sclk_mipi";
-		phys = <&mipi_phy 1>;
-		phy-names = "dsim";
-		vddcore-supply = <&vusb_reg>;
-		vddio-supply = <&vmipi_reg>;
-		power-domains = <&pd_lcd0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		samsung,pll-clock-frequency = <24000000>;
-
-		panel@1 {
-			reg = <0>;
-			...
-			port {
-				panel_ep: endpoint {
-					remote-endpoint = <&dsi_ep>;
-				};
-			};
-		};
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				decon_to_mic: endpoint {
-					remote-endpoint = <&mic_to_decon>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				dsi_ep: endpoint {
-					reg = <0>;
-					samsung,burst-clock-frequency = <500000000>;
-					samsung,esc-clock-frequency = <20000000>;
-					remote-endpoint = <&panel_ep>;
-				};
-			};
-		};
-	};