diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
20 files changed, 334 insertions, 22 deletions
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt index de4075413d91..161e63a6c254 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt @@ -14,6 +14,8 @@ Required Properties: - "mediatek,mt7629-apmixedsys" - "mediatek,mt8135-apmixedsys" - "mediatek,mt8173-apmixedsys" + - "mediatek,mt8183-apmixedsys", "syscon" + - "mediatek,mt8516-apmixedsys" - #clock-cells: Must be 1 The apmixedsys controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt index d1606b2c3e63..f3cef1a6d95c 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt @@ -9,6 +9,7 @@ Required Properties: - "mediatek,mt2701-audsys", "syscon" - "mediatek,mt7622-audsys", "syscon" - "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon" + - "mediatek,mt8183-audiosys", "syscon" - #clock-cells: Must be 1 The AUDSYS controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt new file mode 100644 index 000000000000..d8930f64aa98 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt @@ -0,0 +1,22 @@ +MediaTek CAMSYS controller +============================ + +The MediaTek camsys controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be one of: + - "mediatek,mt8183-camsys", "syscon" +- #clock-cells: Must be 1 + +The camsys controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +camsys: camsys@1a000000 { + compatible = "mediatek,mt8183-camsys", "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt index 3f99672163e3..e3bc4a1e7a6e 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt @@ -11,6 +11,7 @@ Required Properties: - "mediatek,mt6797-imgsys", "syscon" - "mediatek,mt7623-imgsys", "mediatek,mt2701-imgsys", "syscon" - "mediatek,mt8173-imgsys", "syscon" + - "mediatek,mt8183-imgsys", "syscon" - #clock-cells: Must be 1 The imgsys controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt index 417bd83d1378..a90913988d7e 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt @@ -15,6 +15,8 @@ Required Properties: - "mediatek,mt7629-infracfg", "syscon" - "mediatek,mt8135-infracfg", "syscon" - "mediatek,mt8173-infracfg", "syscon" + - "mediatek,mt8183-infracfg", "syscon" + - "mediatek,mt8516-infracfg", "syscon" - #clock-cells: Must be 1 - #reset-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ipu.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ipu.txt new file mode 100644 index 000000000000..aabc8c5c8ed2 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ipu.txt @@ -0,0 +1,43 @@ +Mediatek IPU controller +============================ + +The Mediatek ipu controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be one of: + - "mediatek,mt8183-ipu_conn", "syscon" + - "mediatek,mt8183-ipu_adl", "syscon" + - "mediatek,mt8183-ipu_core0", "syscon" + - "mediatek,mt8183-ipu_core1", "syscon" +- #clock-cells: Must be 1 + +The ipu controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +ipu_conn: syscon@19000000 { + compatible = "mediatek,mt8183-ipu_conn", "syscon"; + reg = <0 0x19000000 0 0x1000>; + #clock-cells = <1>; +}; + +ipu_adl: syscon@19010000 { + compatible = "mediatek,mt8183-ipu_adl", "syscon"; + reg = <0 0x19010000 0 0x1000>; + #clock-cells = <1>; +}; + +ipu_core0: syscon@19180000 { + compatible = "mediatek,mt8183-ipu_core0", "syscon"; + reg = <0 0x19180000 0 0x1000>; + #clock-cells = <1>; +}; + +ipu_core1: syscon@19280000 { + compatible = "mediatek,mt8183-ipu_core1", "syscon"; + reg = <0 0x19280000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt index b8fb03f3613e..2b882b7ca72e 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2712-mcucfg", "syscon" + - "mediatek,mt8183-mcucfg", "syscon" - #clock-cells: Must be 1 The mcucfg controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt index 859e67b416d5..72787e7dd227 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2712-mfgcfg", "syscon" + - "mediatek,mt8183-mfgcfg", "syscon" - #clock-cells: Must be 1 The mfgcfg controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt index 15d977afad31..545eab717c96 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt @@ -11,6 +11,7 @@ Required Properties: - "mediatek,mt6797-mmsys", "syscon" - "mediatek,mt7623-mmsys", "mediatek,mt2701-mmsys", "syscon" - "mediatek,mt8173-mmsys", "syscon" + - "mediatek,mt8183-mmsys", "syscon" - #clock-cells: Must be 1 The mmsys controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt index d160c2b4b6fe..a023b8338960 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt @@ -14,6 +14,8 @@ Required Properties: - "mediatek,mt7629-topckgen" - "mediatek,mt8135-topckgen" - "mediatek,mt8173-topckgen" + - "mediatek,mt8183-topckgen", "syscon" + - "mediatek,mt8516-topckgen" - #clock-cells: Must be 1 The topckgen controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt index 3212afc753c8..57176bb8dbb5 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt @@ -11,6 +11,7 @@ Required Properties: - "mediatek,mt6797-vdecsys", "syscon" - "mediatek,mt7623-vdecsys", "mediatek,mt2701-vdecsys", "syscon" - "mediatek,mt8173-vdecsys", "syscon" + - "mediatek,mt8183-vdecsys", "syscon" - #clock-cells: Must be 1 The vdecsys controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt index 851545357e94..c9faa6269087 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt @@ -9,6 +9,7 @@ Required Properties: - "mediatek,mt2712-vencsys", "syscon" - "mediatek,mt6797-vencsys", "syscon" - "mediatek,mt8173-vencsys", "syscon" + - "mediatek,mt8183-vencsys", "syscon" - #clock-cells: Must be 1 The vencsys controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt index 61777ad24f61..0f777749f4f1 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt @@ -6,7 +6,8 @@ devices. Required Properties: -- compatible : should be "amlogic,axg-audio-clkc" for the A113X and A113D +- compatible : should be "amlogic,axg-audio-clkc" for the A113X and A113D, + "amlogic,g12a-audio-clkc" for G12A. - reg : physical base address of the clock controller and length of memory mapped region. - clocks : a list of phandle + clock-specifier pairs for the clocks listed diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt index e9f70fcdfe80..b520280e33ff 100644 --- a/Documentation/devicetree/bindings/clock/at91-clock.txt +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt @@ -8,35 +8,30 @@ Slow Clock controller: Required properties: - compatible : shall be one of the following: - "atmel,at91sam9x5-sckc" or + "atmel,at91sam9x5-sckc", + "atmel,sama5d3-sckc" or "atmel,sama5d4-sckc": at91 SCKC (Slow Clock Controller) - This node contains the slow clock definitions. - - "atmel,at91sam9x5-clk-slow-osc": - at91 slow oscillator - - "atmel,at91sam9x5-clk-slow-rc-osc": - at91 internal slow RC oscillator -- reg : defines the IO memory reserved for the SCKC. -- #size-cells : shall be 0 (reg is used to encode clk id). -- #address-cells : shall be 1 (reg is used to encode clk id). +- #clock-cells : shall be 0. +- clocks : shall be the input parent clock phandle for the clock. +Optional properties: +- atmel,osc-bypass : boolean property. Set this when a clock signal is directly + provided on XIN. For example: - sckc: sckc@fffffe50 { - compatible = "atmel,sama5d3-pmc"; - reg = <0xfffffe50 0x4> - #size-cells = <0>; - #address-cells = <1>; - - /* put at91 slow clocks here */ + sckc@fffffe50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffe50 0x4>; + clocks = <&slow_xtal>; + #clock-cells = <0>; }; Power Management Controller (PMC): Required properties: -- compatible : shall be "atmel,<chip>-pmc", "syscon": +- compatible : shall be "atmel,<chip>-pmc", "syscon" or + "microchip,sam9x60-pmc" <chip> can be: at91rm9200, at91sam9260, at91sam9261, at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9g15, at91sam9g25, at91sam9g35, at91sam9x25, at91sam9x35, at91sam9x5, diff --git a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt new file mode 100644 index 000000000000..b8d8ef3bdc5f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt @@ -0,0 +1,93 @@ +Cirrus Logic Lochnagar Audio Development Board + +Lochnagar is an evaluation and development board for Cirrus Logic +Smart CODEC and Amp devices. It allows the connection of most Cirrus +Logic devices on mini-cards, as well as allowing connection of +various application processor systems to provide a full evaluation +platform. Audio system topology, clocking and power can all be +controlled through the Lochnagar, allowing the device under test +to be used in a variety of possible use cases. + +This binding document describes the binding for the clock portion of +the driver. + +Also see these documents for generic binding information: + [1] Clock : ../clock/clock-bindings.txt + +And these for relevant defines: + [2] include/dt-bindings/clock/lochnagar.h + +This binding must be part of the Lochnagar MFD binding: + [3] ../mfd/cirrus,lochnagar.txt + +Required properties: + + - compatible : One of the following strings: + "cirrus,lochnagar1-clk" + "cirrus,lochnagar2-clk" + + - #clock-cells : Must be 1. The first cell indicates the clock + number, see [2] for available clocks and [1]. + +Optional properties: + + - clocks : Must contain an entry for each clock in clock-names. + - clock-names : May contain entries for each of the following + clocks: + - ln-cdc-clkout : Output clock from CODEC card. + - ln-dsp-clkout : Output clock from DSP card. + - ln-gf-mclk1,ln-gf-mclk2,ln-gf-mclk3,ln-gf-mclk4 : Optional + input audio clocks from host system. + - ln-psia1-mclk, ln-psia2-mclk : Optional input audio clocks from + external connector. + - ln-spdif-clkout : Optional input audio clock from SPDIF. + - ln-adat-mclk : Optional input audio clock from ADAT. + - ln-pmic-32k : On board fixed clock. + - ln-clk-12m : On board fixed clock. + - ln-clk-11m : On board fixed clock. + - ln-clk-24m : On board fixed clock. + - ln-clk-22m : On board fixed clock. + - ln-clk-8m : On board fixed clock. + - ln-usb-clk-24m : On board fixed clock. + - ln-usb-clk-12m : On board fixed clock. + + - assigned-clocks : A list of Lochnagar clocks to be reparented, see + [2] for available clocks. + - assigned-clock-parents : Parents to be assigned to the clocks + listed in "assigned-clocks". + +Optional nodes: + + - fixed-clock nodes may be registered for the following on board clocks: + - ln-pmic-32k : 32768 Hz + - ln-clk-12m : 12288000 Hz + - ln-clk-11m : 11298600 Hz + - ln-clk-24m : 24576000 Hz + - ln-clk-22m : 22579200 Hz + - ln-clk-8m : 8192000 Hz + - ln-usb-clk-24m : 24576000 Hz + - ln-usb-clk-12m : 12288000 Hz + +Example: + +lochnagar { + lochnagar-clk { + compatible = "cirrus,lochnagar2-clk"; + + #clock-cells = <1>; + + clocks = <&clk-audio>, <&clk_pmic>; + clock-names = "ln-gf-mclk2", "ln-pmic-32k"; + + assigned-clocks = <&lochnagar-clk LOCHNAGAR_CDC_MCLK1>, + <&lochnagar-clk LOCHNAGAR_CDC_MCLK2>; + assigned-clock-parents = <&clk-audio>, + <&clk-pmic>; + }; + + clk-pmic: clk-pmic { + compatible = "fixed-clock"; + clock-cells = <0>; + clock-frequency = <32768>; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml new file mode 100644 index 000000000000..5cf0b811821e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bindings/clock/milbeaut-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Milbeaut SoCs Clock Controller Binding + +maintainers: + - Taichi Sugaya <sugaya.taichi@socionext.com> + +description: | + Milbeaut SoCs Clock controller is an integrated clock controller, which + generates and supplies to all modules. + + This binding uses common clock bindings + [1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +properties: + compatible: + oneOf: + - items: + - enum: + - socionext,milbeaut-m10v-ccu + clocks: + maxItems: 1 + description: external clock + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +examples: + # Clock controller node: + - | + m10v-clk-ctrl@1d021000 { + compatible = "socionext,milbeaut-m10v-clk-ccu"; + reg = <0x1d021000 0x4000>; + #clock-cells = <1>; + clocks = <&clki40mhz>; + }; + + # Required an external clock for Clock controller node: + - | + clocks { + clki40mhz: clki40mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <40000000>; + }; + /* other clocks */ + }; + + # The clock consumer shall specify the desired clock-output of the clock + # controller as below by specifying output-id in its "clk" phandle cell. + # 2: uart + # 4: 32-bit timer + # 7: UHS-I/II + - | + serial@1e700010 { + compatible = "socionext,milbeaut-usio-uart"; + reg = <0x1e700010 0x10>; + interrupts = <0 141 0x4>, <0 149 0x4>; + interrupt-names = "rx", "tx"; + clocks = <&clk 2>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/qcom,turingcc.txt b/Documentation/devicetree/bindings/clock/qcom,turingcc.txt new file mode 100644 index 000000000000..126517de5f9a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,turingcc.txt @@ -0,0 +1,19 @@ +Qualcomm Turing Clock & Reset Controller Binding +------------------------------------------------ + +Required properties : +- compatible: shall contain "qcom,qcs404-turingcc". +- reg: shall contain base register location and length. +- clocks: ahb clock for the TuringCC +- #clock-cells: from common clock binding, shall contain 1. +- #reset-cells: from common reset binding, shall contain 1. + +Example: + turingcc: clock-controller@800000 { + compatible = "qcom,qcs404-turingcc"; + reg = <0x00800000 0x30000>; + clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>; + + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt index c655f28d5918..f7d48f23da44 100644 --- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt @@ -39,6 +39,7 @@ Required properties: * "fsl,b4860-clockgen" * "fsl,ls1012a-clockgen" * "fsl,ls1021a-clockgen" + * "fsl,ls1028a-clockgen" * "fsl,ls1043a-clockgen" * "fsl,ls1046a-clockgen" * "fsl,ls1088a-clockgen" @@ -83,8 +84,8 @@ second cell is the clock index for the specified type. 1 cmux index (n in CLKCnCSR) 2 hwaccel index (n in CLKCGnHWACSR) 3 fman 0 for fm1, 1 for fm2 - 4 platform pll 0=pll, 1=pll/2, 2=pll/3, 3=pll/4 - 4=pll/5, 5=pll/6, 6=pll/7, 7=pll/8 + 4 platform pll n=pll/(n+1). For example, when n=1, + that means output_freq=PLL_freq/2. 5 coreclk must be 0 3. Example diff --git a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt new file mode 100644 index 000000000000..349808f4fb8c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt @@ -0,0 +1,46 @@ +SiFive FU540 PRCI bindings + +On the FU540 family of SoCs, most system-wide clock and reset integration +is via the PRCI IP block. + +Required properties: +- compatible: Should be "sifive,<chip>-prci". Only one value is + supported: "sifive,fu540-c000-prci" +- reg: Should describe the PRCI's register target physical address region +- clocks: Should point to the hfclk device tree node and the rtcclk + device tree node. The RTC clock here is not a time-of-day clock, + but is instead a high-stability clock source for system timers + and cycle counters. +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock via the clock ID +macros defined in include/dt-bindings/clock/sifive-fu540-prci.h. +These macros begin with PRCI_CLK_. + +The hfclk and rtcclk nodes are required, and represent physical +crystals or resonators located on the PCB. These nodes should be present +underneath /, rather than /soc. + +Examples: + +/* under /, in PCB-specific DT data */ +hfclk: hfclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333333>; + clock-output-names = "hfclk"; +}; +rtcclk: rtcclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <1000000>; + clock-output-names = "rtcclk"; +}; + +/* under /soc, in SoC-specific DT data */ +prci: clock-controller@10000000 { + compatible = "sifive,fu540-c000-prci"; + reg = <0x0 0x10000000 0x0 0x1000>; + clocks = <&hfclk>, <&rtcclk>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt index b240121d2ac9..cfa04b614d8a 100644 --- a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt +++ b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt @@ -11,6 +11,8 @@ Required properties: "st,stm32f42xx-rcc" "st,stm32f469-rcc" "st,stm32f746-rcc" + "st,stm32f769-rcc" + - reg: should be register base and length as documented in the datasheet - #reset-cells: 1, see below @@ -102,6 +104,10 @@ The secondary index is bound with the following magic numbers: 28 CLK_I2C3 29 CLK_I2C4 30 CLK_LPTIMER (LPTimer1 clock) + 31 CLK_PLL_SRC + 32 CLK_DFSDM1 + 33 CLK_ADFSDM1 + 34 CLK_F769_DSI ) Example: |