summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings')
-rw-r--r--Documentation/devicetree/bindings/media/i2c/adv748x.txt11
-rw-r--r--Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt20
-rw-r--r--Documentation/devicetree/bindings/media/i2c/mt9m001.txt38
-rw-r--r--Documentation/devicetree/bindings/media/i2c/ov5645.txt6
-rw-r--r--Documentation/devicetree/bindings/media/imx7-csi.txt45
-rw-r--r--Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt90
-rw-r--r--Documentation/devicetree/bindings/media/mediatek-vcodec.txt13
-rw-r--r--Documentation/devicetree/bindings/media/rcar_vin.txt9
-rw-r--r--Documentation/devicetree/bindings/media/renesas,fcp.txt5
-rw-r--r--Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt3
-rw-r--r--Documentation/devicetree/bindings/media/renesas,vsp1.txt6
-rw-r--r--Documentation/devicetree/bindings/media/si470x.txt26
-rw-r--r--Documentation/devicetree/bindings/media/sun6i-csi.txt3
13 files changed, 260 insertions, 15 deletions
diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
index 5dddc95f9cc4..4f91686e54a6 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
@@ -48,7 +48,16 @@ are numbered as follows.
TXA source 10
TXB source 11
-The digital output port nodes must contain at least one endpoint.
+The digital output port nodes, when present, shall contain at least one
+endpoint. Each of those endpoints shall contain the data-lanes property as
+described in video-interfaces.txt.
+
+Required source endpoint properties:
+ - data-lanes: an array of physical data lane indexes
+ The accepted value(s) for this property depends on which of the two
+ sources are described. For TXA 1, 2 or 4 data lanes can be described
+ while for TXB only 1 data lane is valid. See video-interfaces.txt
+ for detailed description.
Ports are optional if they are not connected to anything at the hardware level.
diff --git a/Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt b/Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt
new file mode 100644
index 000000000000..060d2b7a5893
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt
@@ -0,0 +1,20 @@
+* Melexis MLX90640 FIR Sensor
+
+Melexis MLX90640 FIR sensor support which allows recording of thermal data
+with 32x24 resolution excluding 2 lines of coefficient data that is used by
+userspace to render processed frames.
+
+Required Properties:
+ - compatible : Must be "melexis,mlx90640"
+ - reg : i2c address of the device
+
+Example:
+
+ i2c0@1c22000 {
+ ...
+ mlx90640@33 {
+ compatible = "melexis,mlx90640";
+ reg = <0x33>;
+ };
+ ...
+ };
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9m001.txt b/Documentation/devicetree/bindings/media/i2c/mt9m001.txt
new file mode 100644
index 000000000000..c920552b03ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/mt9m001.txt
@@ -0,0 +1,38 @@
+MT9M001: 1/2-Inch Megapixel Digital Image Sensor
+
+The MT9M001 is an SXGA-format with a 1/2-inch CMOS active-pixel digital
+image sensor. It is programmable through I2C interface.
+
+Required Properties:
+
+- compatible: shall be "onnn,mt9m001".
+- clocks: reference to the master clock into sensor
+
+Optional Properties:
+
+- reset-gpios: GPIO handle which is connected to the reset pin of the chip.
+ Active low.
+- standby-gpios: GPIO handle which is connected to the standby pin of the chip.
+ Active high.
+
+The device node must contain one 'port' child node with one 'endpoint' child
+sub-node for its digital output video port, in accordance with the video
+interface bindings defined in:
+Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+ &i2c1 {
+ camera-sensor@5d {
+ compatible = "onnn,mt9m001";
+ reg = <0x5d>;
+ reset-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ standby-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ clocks = <&camera_clk>;
+ port {
+ mt9m001_out: endpoint {
+ remote-endpoint = <&vcap_in>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.txt b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
index fd7aec9f8e24..72ad992f77be 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov5645.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
@@ -26,9 +26,9 @@ Example:
&i2c1 {
...
- ov5645: ov5645@78 {
+ ov5645: ov5645@3c {
compatible = "ovti,ov5645";
- reg = <0x78>;
+ reg = <0x3c>;
enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
@@ -37,7 +37,7 @@ Example:
clocks = <&clks 200>;
clock-names = "xclk";
- clock-frequency = <23880000>;
+ clock-frequency = <24000000>;
vdddo-supply = <&camera_dovdd_1v8>;
vdda-supply = <&camera_avdd_2v8>;
diff --git a/Documentation/devicetree/bindings/media/imx7-csi.txt b/Documentation/devicetree/bindings/media/imx7-csi.txt
new file mode 100644
index 000000000000..3c07bc676bc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/imx7-csi.txt
@@ -0,0 +1,45 @@
+Freescale i.MX7 CMOS Sensor Interface
+=====================================
+
+csi node
+--------
+
+This is device node for the CMOS Sensor Interface (CSI) which enables the chip
+to connect directly to external CMOS image sensors.
+
+Required properties:
+
+- compatible : "fsl,imx7-csi";
+- reg : base address and length of the register set for the device;
+- interrupts : should contain CSI interrupt;
+- clocks : list of clock specifiers, see
+ Documentation/devicetree/bindings/clock/clock-bindings.txt for details;
+- clock-names : must contain "axi", "mclk" and "dcic" entries, matching
+ entries in the clock property;
+
+The device node shall contain one 'port' child node with one child 'endpoint'
+node, according to the bindings defined in:
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+In the following example a remote endpoint is a video multiplexer.
+
+example:
+
+ csi: csi@30710000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "fsl,imx7-csi";
+ reg = <0x30710000 0x10000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CSI_MCLK_ROOT_CLK>,
+ <&clks IMX7D_CLK_DUMMY>;
+ clock-names = "axi", "mclk", "dcic";
+
+ port {
+ csi_from_csi_mux: endpoint {
+ remote-endpoint = <&csi_mux_to_csi>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt b/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt
new file mode 100644
index 000000000000..71fd74ed3ec8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt
@@ -0,0 +1,90 @@
+Freescale i.MX7 Mipi CSI2
+=========================
+
+mipi_csi2 node
+--------------
+
+This is the device node for the MIPI CSI-2 receiver core in i.MX7 SoC. It is
+compatible with previous version of Samsung D-phy.
+
+Required properties:
+
+- compatible : "fsl,imx7-mipi-csi2";
+- reg : base address and length of the register set for the device;
+- interrupts : should contain MIPI CSIS interrupt;
+- clocks : list of clock specifiers, see
+ Documentation/devicetree/bindings/clock/clock-bindings.txt for details;
+- clock-names : must contain "pclk", "wrap" and "phy" entries, matching
+ entries in the clock property;
+- power-domains : a phandle to the power domain, see
+ Documentation/devicetree/bindings/power/power_domain.txt for details.
+- reset-names : should include following entry "mrst";
+- resets : a list of phandle, should contain reset entry of
+ reset-names;
+- phy-supply : from the generic phy bindings, a phandle to a regulator that
+ provides power to MIPI CSIS core;
+
+Optional properties:
+
+- clock-frequency : The IP's main (system bus) clock frequency in Hz, default
+ value when this property is not specified is 166 MHz;
+- fsl,csis-hs-settle : differential receiver (HS-RX) settle time;
+
+The device node should contain two 'port' child nodes with one child 'endpoint'
+node, according to the bindings defined in:
+ Documentation/devicetree/bindings/ media/video-interfaces.txt.
+ The following are properties specific to those nodes.
+
+port node
+---------
+
+- reg : (required) can take the values 0 or 1, where 0 shall be
+ related to the sink port and port 1 shall be the source
+ one;
+
+endpoint node
+-------------
+
+- data-lanes : (required) an array specifying active physical MIPI-CSI2
+ data input lanes and their mapping to logical lanes; this
+ shall only be applied to port 0 (sink port), the array's
+ content is unused only its length is meaningful,
+ in this case the maximum length supported is 2;
+
+example:
+
+ mipi_csi: mipi-csi@30750000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "fsl,imx7-mipi-csi2";
+ reg = <0x30750000 0x10000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+ <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
+ <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
+ clock-names = "pclk", "wrap", "phy";
+ clock-frequency = <166000000>;
+ power-domains = <&pgc_mipi_phy>;
+ phy-supply = <&reg_1p0d>;
+ resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
+ reset-names = "mrst";
+ fsl,csis-hs-settle = <3>;
+
+ port@0 {
+ reg = <0>;
+
+ mipi_from_sensor: endpoint {
+ remote-endpoint = <&ov2680_to_mipi>;
+ data-lanes = <1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mipi_vc0_to_csi_mux: endpoint {
+ remote-endpoint = <&csi_mux_from_mipi_vc0>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
index 2a615d84a682..b6b5dde6abd8 100644
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -66,6 +66,15 @@ vcodec_dec: vcodec@16000000 {
"vencpll",
"venc_lt_sel",
"vdec_bus_clk_src";
+ assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>,
+ <&topckgen CLK_TOP_CCI400_SEL>,
+ <&topckgen CLK_TOP_VDEC_SEL>,
+ <&apmixedsys CLK_APMIXED_VCODECPLL>,
+ <&apmixedsys CLK_APMIXED_VENCPLL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>,
+ <&topckgen CLK_TOP_UNIVPLL_D2>,
+ <&topckgen CLK_TOP_VCODECPLL>;
+ assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>;
};
vcodec_enc: vcodec@18002000 {
@@ -105,4 +114,8 @@ vcodec_dec: vcodec@16000000 {
"venc_sel",
"venc_lt_sel_src",
"venc_lt_sel";
+ assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>,
+ <&topckgen CLK_TOP_VENC_LT_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_VENCPLL_D2>,
+ <&topckgen CLK_TOP_UNIVPLL1_D2>;
};
diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
index 0dd84a183ca7..224a4615b418 100644
--- a/Documentation/devicetree/bindings/media/rcar_vin.txt
+++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
@@ -7,12 +7,13 @@ family of devices.
Each VIN instance has a single parallel input that supports RGB and YUV video,
with both external synchronization and BT.656 synchronization for the latter.
Depending on the instance the VIN input is connected to external SoC pins, or
-on Gen3 platforms to a CSI-2 receiver.
+on Gen3 and RZ/G2 platforms to a CSI-2 receiver.
- compatible: Must be one or more of the following
- "renesas,vin-r8a7743" for the R8A7743 device
- "renesas,vin-r8a7744" for the R8A7744 device
- "renesas,vin-r8a7745" for the R8A7745 device
+ - "renesas,vin-r8a774c0" for the R8A774C0 device
- "renesas,vin-r8a7778" for the R8A7778 device
- "renesas,vin-r8a7779" for the R8A7779 device
- "renesas,vin-r8a7790" for the R8A7790 device
@@ -61,10 +62,10 @@ The per-board settings Gen2 platforms:
- data-enable-active: polarity of CLKENB signal, see [1] for
description. Default is active high.
-The per-board settings Gen3 platforms:
+The per-board settings Gen3 and RZ/G2 platforms:
-Gen3 platforms can support both a single connected parallel input source
-from external SoC pins (port@0) and/or multiple parallel input sources
+Gen3 and RZ/G2 platforms can support both a single connected parallel input
+source from external SoC pins (port@0) and/or multiple parallel input sources
from local SoC CSI-2 receivers (port@1) depending on SoC.
- renesas,id - ID number of the VIN, VINx in the documentation.
diff --git a/Documentation/devicetree/bindings/media/renesas,fcp.txt b/Documentation/devicetree/bindings/media/renesas,fcp.txt
index 3ec91803ba58..79c37395b396 100644
--- a/Documentation/devicetree/bindings/media/renesas,fcp.txt
+++ b/Documentation/devicetree/bindings/media/renesas,fcp.txt
@@ -2,8 +2,9 @@ Renesas R-Car Frame Compression Processor (FCP)
-----------------------------------------------
The FCP is a companion module of video processing modules in the Renesas R-Car
-Gen3 SoCs. It provides data compression and decompression, data caching, and
-conversion of AXI transactions in order to reduce the memory bandwidth.
+Gen3 and RZ/G2 SoCs. It provides data compression and decompression, data
+caching, and conversion of AXI transactions in order to reduce the memory
+bandwidth.
There are three types of FCP: FCP for Codec (FCPC), FCP for VSP (FCPV) and FCP
for FDP (FCPF). Their configuration and behaviour depend on the module they
diff --git a/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt b/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt
index 541d936b62e8..d63275e17afd 100644
--- a/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt
+++ b/Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt
@@ -2,12 +2,13 @@ Renesas R-Car MIPI CSI-2
------------------------
The R-Car CSI-2 receiver device provides MIPI CSI-2 capabilities for the
-Renesas R-Car family of devices. It is used in conjunction with the
+Renesas R-Car and RZ/G2 family of devices. It is used in conjunction with the
R-Car VIN module, which provides the video capture capabilities.
Mandatory properties
--------------------
- compatible: Must be one or more of the following
+ - "renesas,r8a774c0-csi2" for the R8A774C0 device.
- "renesas,r8a7795-csi2" for the R8A7795 device.
- "renesas,r8a7796-csi2" for the R8A7796 device.
- "renesas,r8a77965-csi2" for the R8A77965 device.
diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.txt b/Documentation/devicetree/bindings/media/renesas,vsp1.txt
index 16427017cb45..cd5a955b2ea0 100644
--- a/Documentation/devicetree/bindings/media/renesas,vsp1.txt
+++ b/Documentation/devicetree/bindings/media/renesas,vsp1.txt
@@ -2,13 +2,13 @@
The VSP is a video processing engine that supports up-/down-scaling, alpha
blending, color space conversion and various other image processing features.
-It can be found in the Renesas R-Car second generation SoCs.
+It can be found in the Renesas R-Car Gen2, R-Car Gen3, RZ/G1, and RZ/G2 SoCs.
Required properties:
- compatible: Must contain one of the following values
- - "renesas,vsp1" for the R-Car Gen2 VSP1
- - "renesas,vsp2" for the R-Car Gen3 VSP2
+ - "renesas,vsp1" for the R-Car Gen2 and RZ/G1 VSP1
+ - "renesas,vsp2" for the R-Car Gen3 and RZ/G2 VSP2
- reg: Base address and length of the registers block for the VSP.
- interrupts: VSP interrupt specifier.
diff --git a/Documentation/devicetree/bindings/media/si470x.txt b/Documentation/devicetree/bindings/media/si470x.txt
new file mode 100644
index 000000000000..a9403558362e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/si470x.txt
@@ -0,0 +1,26 @@
+* Silicon Labs FM Radio receiver
+
+The Silicon Labs Si470x is family of FM radio receivers with receive power scan
+supporting 76-108 MHz, programmable through an I2C interface.
+Some of them includes an RDS encoder.
+
+Required Properties:
+- compatible: Should contain "silabs,si470x"
+- reg: the I2C address of the device
+
+Optional Properties:
+- interrupts : The interrupt number
+- reset-gpios: GPIO specifier for the chips reset line
+
+Example:
+
+&i2c2 {
+ si470x@63 {
+ compatible = "silabs,si470x";
+ reg = <0x63>;
+
+ interrupt-parent = <&gpj2>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpj2 5 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/media/sun6i-csi.txt b/Documentation/devicetree/bindings/media/sun6i-csi.txt
index d4ab34f2240c..0dd540bb03db 100644
--- a/Documentation/devicetree/bindings/media/sun6i-csi.txt
+++ b/Documentation/devicetree/bindings/media/sun6i-csi.txt
@@ -6,8 +6,9 @@ Allwinner V3s SoC features a CSI module(CSI1) with parallel interface.
Required properties:
- compatible: value must be one of:
* "allwinner,sun6i-a31-csi"
- * "allwinner,sun8i-h3-csi", "allwinner,sun6i-a31-csi"
+ * "allwinner,sun8i-h3-csi"
* "allwinner,sun8i-v3s-csi"
+ * "allwinner,sun50i-a64-csi"
- reg: base address and size of the memory-mapped region.
- interrupts: interrupt associated to this IP
- clocks: phandles to the clocks feeding the CSI