diff options
Diffstat (limited to 'Documentation/devicetree')
3 files changed, 52 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml index acea1cd444fd..8d944d02198f 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml @@ -25,6 +25,8 @@ properties: - fsl,imx6qp-pcie - fsl,imx7d-pcie - fsl,imx8mq-pcie + - fsl,imx8qm-pcie + - fsl,imx8qxp-pcie reg: items: @@ -148,6 +150,23 @@ properties: the three PCIe PHY powers. This regulator can be supplied by both 1.8v and 3.3v voltage supplies (optional required). + hsio-cfg: + description: hsio configuration mode when the pcie node is supported. + mode 1: pciea 2 lanes and one sata ahci port. + mode 2: pciea 1 lane, pcieb 1 lane and one sata ahci port. + mode 3: pciea 2 lanes, pcieb 1 lane. + + local-addr: + description: the local address used in hsio module. + + reset-names: + description: Must contain the following entries: "clkreq" + + l1ss-disabled: + description: Force to disable L1SS or not. If present then the L1 + substate would be force disabled although it might be supported by the + chip. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt index 5697fe078072..624dabbd992a 100644 --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -26,6 +26,7 @@ Required properties: "fsl,ls1028a-pcie-ep", "fsl,ls-pcie-ep" "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep" "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep" + "fsl,ls1028a-pcie-ep", "fsl,ls-pcie-ep" "fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep" "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep" - reg: base addresses and lengths of the PCIe controller register blocks. @@ -40,12 +41,16 @@ Required properties: ...... - fsl,pcie-scfg: Must include two entries. The first entry must be a link to the SCFG device node - The second entry must be '0' or '1' based on physical PCIe controller index. + The second entry is the physical PCIe controller index starting from '0'. This is used to get SCFG PEXN registers - dma-coherent: Indicates that the hardware IP block can ensure the coherency of the data transferred from/to the IP block. This can avoid the software cache flush/invalid actions, and improve the performance significantly. +Optional properties: +- big-endian: If the PEX_LUT and PF register block is in big-endian, specify + this property. + Example: pcie@3400000 { diff --git a/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt b/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt index b40fb5d15d3d..414a86c9c6af 100644 --- a/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt +++ b/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt @@ -3,6 +3,8 @@ NXP Layerscape PCIe Gen4 controller This PCIe controller is based on the Mobiveil PCIe IP and thus inherits all the common properties defined in mobiveil-pcie.txt. +HOST MODE +========= Required properties: - compatible: should contain the platform identifier such as: "fsl,lx2160a-pcie" @@ -23,7 +25,20 @@ Required properties: - msi-parent : See the generic MSI binding described in Documentation/devicetree/bindings/interrupt-controller/msi.txt. -Example: +DEVICE MODE +========= +Required properties: +- compatible: should contain the platform identifier such as: + "fsl,lx2160a-pcie-ep" +- reg: base addresses and lengths of the PCIe controller register blocks. + "regs": PCIe controller registers. + "addr_space" EP device CPU address. +- apio-wins: number of requested apio outbound windows. + +Optional Property: +- max-functions: Maximum number of functions that can be configured (default 1). + +RC Example: pcie@3400000 { compatible = "fsl,lx2160a-pcie"; @@ -50,3 +65,14 @@ Example: <0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; }; + +EP Example: + + pcie_ep@3400000 { + compatible = "fsl,lx2160a-pcie-ep"; + reg = <0x00 0x03400000 0x0 0x00100000 + 0x80 0x00000000 0x8 0x00000000>; + reg-names = "regs", "addr_space"; + apio-wins = <8>; + status = "disabled"; + }; |