diff options
Diffstat (limited to 'Documentation/hwmon/ltc4261')
| -rw-r--r-- | Documentation/hwmon/ltc4261 | 16 |
1 files changed, 12 insertions, 4 deletions
diff --git a/Documentation/hwmon/ltc4261 b/Documentation/hwmon/ltc4261 index 9378a75c6134..c80233f8082e 100644 --- a/Documentation/hwmon/ltc4261 +++ b/Documentation/hwmon/ltc4261 @@ -2,11 +2,16 @@ Kernel driver ltc4261 ===================== Supported chips: + * Linear Technology LTC4261 + Prefix: 'ltc4261' + Addresses scanned: - + Datasheet: - http://cds.linear.com/docs/Datasheet/42612fb.pdf + + http://cds.linear.com/docs/Datasheet/42612fb.pdf Author: Guenter Roeck <linux@roeck-us.net> @@ -26,9 +31,10 @@ which can be safely used to identify the chip. You will have to instantiate the devices explicitly. Example: the following will load the driver for an LTC4261 at address 0x10 -on I2C bus #1: -$ modprobe ltc4261 -$ echo ltc4261 0x10 > /sys/bus/i2c/devices/i2c-1/new_device +on I2C bus #1:: + + $ modprobe ltc4261 + $ echo ltc4261 0x10 > /sys/bus/i2c/devices/i2c-1/new_device Sysfs entries @@ -51,6 +57,7 @@ the proximity of the ADIN2 pin to the OV pin. ADIN2 is, however, not available on all chip variants. To ensure that the alarm condition is reported to the user, report it with both voltage sensors. +======================= ============================= in1_input ADIN2 voltage (mV) in1_min_alarm ADIN/ADIN2 Undervoltage alarm in1_max_alarm ADIN/ADIN2 Overvoltage alarm @@ -61,3 +68,4 @@ in2_max_alarm ADIN/ADIN2 Overvoltage alarm curr1_input SENSE current (mA) curr1_alarm SENSE overcurrent alarm +======================= ============================= |