summaryrefslogtreecommitdiff
path: root/Documentation/hwmon/sht15
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/hwmon/sht15')
-rw-r--r--Documentation/hwmon/sht1528
1 files changed, 19 insertions, 9 deletions
diff --git a/Documentation/hwmon/sht15 b/Documentation/hwmon/sht15
index 5e3207c3b177..485abe037f6c 100644
--- a/Documentation/hwmon/sht15
+++ b/Documentation/hwmon/sht15
@@ -2,29 +2,37 @@ Kernel driver sht15
===================
Authors:
+
* Wouter Horre
* Jonathan Cameron
* Vivien Didelot <vivien.didelot@savoirfairelinux.com>
* Jerome Oufella <jerome.oufella@savoirfairelinux.com>
Supported chips:
+
* Sensirion SHT10
+
Prefix: 'sht10'
* Sensirion SHT11
+
Prefix: 'sht11'
* Sensirion SHT15
+
Prefix: 'sht15'
* Sensirion SHT71
+
Prefix: 'sht71'
* Sensirion SHT75
+
Prefix: 'sht75'
Datasheet: Publicly available at the Sensirion website
-http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf
+
+ http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf
Description
-----------
@@ -63,11 +71,13 @@ Platform data
Sysfs interface
---------------
-* temp1_input: temperature input
-* humidity1_input: humidity input
-* heater_enable: write 1 in this attribute to enable the on-chip heater,
- 0 to disable it. Be careful not to enable the heater
- for too long.
-* temp1_fault: if 1, this means that the voltage is low (below 2.47V) and
- measurement may be invalid.
-* humidity1_fault: same as temp1_fault.
+================== ==========================================================
+temp1_input temperature input
+humidity1_input humidity input
+heater_enable write 1 in this attribute to enable the on-chip heater,
+ 0 to disable it. Be careful not to enable the heater
+ for too long.
+temp1_fault if 1, this means that the voltage is low (below 2.47V) and
+ measurement may be invalid.
+humidity1_fault same as temp1_fault.
+================== ==========================================================