summaryrefslogtreecommitdiff
path: root/Documentation/leds
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/leds')
-rw-r--r--Documentation/leds/ledtrig-usbport.txt41
1 files changed, 41 insertions, 0 deletions
diff --git a/Documentation/leds/ledtrig-usbport.txt b/Documentation/leds/ledtrig-usbport.txt
new file mode 100644
index 000000000000..69f54bfb4789
--- /dev/null
+++ b/Documentation/leds/ledtrig-usbport.txt
@@ -0,0 +1,41 @@
+USB port LED trigger
+====================
+
+This LED trigger can be used for signalling to the user a presence of USB device
+in a given port. It simply turns on LED when device appears and turns it off
+when it disappears.
+
+It requires selecting USB ports that should be observed. All available ones are
+listed as separated entries in a "ports" subdirectory. Selecting is handled by
+echoing "1" to a chosen port.
+
+Please note that this trigger allows selecting multiple USB ports for a single
+LED. This can be useful in two cases:
+
+1) Device with single USB LED and few physical ports
+
+In such a case LED will be turned on as long as there is at least one connected
+USB device.
+
+2) Device with a physical port handled by few controllers
+
+Some devices may have one controller per PHY standard. E.g. USB 3.0 physical
+port may be handled by ohci-platform, ehci-platform and xhci-hcd. If there is
+only one LED user will most likely want to assign ports from all 3 hubs.
+
+
+This trigger can be activated from user space on led class devices as shown
+below:
+
+ echo usbport > trigger
+
+This adds sysfs attributes to the LED that are documented in:
+Documentation/ABI/testing/sysfs-class-led-trigger-usbport
+
+Example use-case:
+
+ echo usbport > trigger
+ echo 1 > ports/usb1-port1
+ echo 1 > ports/usb2-port1
+ cat ports/usb1-port1
+ echo 0 > ports/usb1-port1