summaryrefslogtreecommitdiff
path: root/Documentation/networking/batman-adv.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/networking/batman-adv.txt')
-rw-r--r--Documentation/networking/batman-adv.txt17
1 files changed, 11 insertions, 6 deletions
diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt
index 1b5e7a7f2185..8a8d3d96f6c6 100644
--- a/Documentation/networking/batman-adv.txt
+++ b/Documentation/networking/batman-adv.txt
@@ -43,10 +43,15 @@ new interfaces to verify the compatibility. There is no need to
reload the module if you plug your USB wifi adapter into your ma-
chine after batman advanced was initially loaded.
-To activate a given interface simply write "bat0" into its
-"mesh_iface" file inside the batman_adv subfolder:
+The batman-adv soft-interface can be created using the iproute2
+tool "ip"
-# echo bat0 > /sys/class/net/eth0/batman_adv/mesh_iface
+# ip link add name bat0 type batadv
+
+To activate a given interface simply attach it to the "bat0"
+interface
+
+# ip link set dev eth0 master bat0
Repeat this step for all interfaces you wish to add. Now batman
starts using/broadcasting on this/these interface(s).
@@ -56,10 +61,10 @@ By reading the "iface_status" file you can check its status:
# cat /sys/class/net/eth0/batman_adv/iface_status
# active
-To deactivate an interface you have to write "none" into its
-"mesh_iface" file:
+To deactivate an interface you have to detach it from the
+"bat0" interface:
-# echo none > /sys/class/net/eth0/batman_adv/mesh_iface
+# ip link set dev eth0 nomaster
All mesh wide settings can be found in batman's own interface