diff options
Diffstat (limited to 'Documentation/networking/ethtool-netlink.rst')
| -rw-r--r-- | Documentation/networking/ethtool-netlink.rst | 49 |
1 files changed, 49 insertions, 0 deletions
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst index b6e9af4d0f1b..e45bb555e909 100644 --- a/Documentation/networking/ethtool-netlink.rst +++ b/Documentation/networking/ethtool-netlink.rst @@ -290,6 +290,7 @@ Kernel to userspace: ``ETHTOOL_MSG_PHY_NTF`` Ethernet PHY information change ``ETHTOOL_MSG_TSCONFIG_GET_REPLY`` hw timestamping configuration ``ETHTOOL_MSG_TSCONFIG_SET_REPLY`` new hw timestamping configuration + ``ETHTOOL_MSG_PSE_NTF`` PSE events notification ======================================== ================================= ``GET`` requests are sent by userspace applications to retrieve device @@ -1788,6 +1789,11 @@ Kernel response contents: limit of the PoE PSE. ``ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES`` nested Supported power limit configuration ranges. + ``ETHTOOL_A_PSE_PW_D_ID`` u32 Index of the PSE power domain + ``ETHTOOL_A_PSE_PRIO_MAX`` u32 Priority maximum configurable + on the PoE PSE + ``ETHTOOL_A_PSE_PRIO`` u32 Priority of the PoE PSE + currently configured ========================================== ====== ============================= When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` attribute identifies @@ -1861,6 +1867,15 @@ identifies the C33 PSE power limit ranges through If the controller works with fixed classes, the min and max values will be equal. +The ``ETHTOOL_A_PSE_PW_D_ID`` attribute identifies the index of PSE power +domain. + +When set, the optional ``ETHTOOL_A_PSE_PRIO_MAX`` attribute identifies +the PSE maximum priority value. +When set, the optional ``ETHTOOL_A_PSE_PRIO`` attributes is used to +identifies the currently configured PSE priority. +For a description of PSE priority attributes, see ``PSE_SET``. + PSE_SET ======= @@ -1874,6 +1889,8 @@ Request contents: ``ETHTOOL_A_C33_PSE_ADMIN_CONTROL`` u32 Control PSE Admin state ``ETHTOOL_A_C33_PSE_AVAIL_PWR_LIMIT`` u32 Control PoE PSE available power limit + ``ETHTOOL_A_PSE_PRIO`` u32 Control priority of the + PoE PSE ====================================== ====== ============================= When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` attribute is used @@ -1896,6 +1913,38 @@ various existing products that document power consumption in watts rather than classes. If power limit configuration based on classes is needed, the conversion can be done in user space, for example by ethtool. +When set, the optional ``ETHTOOL_A_PSE_PRIO`` attributes is used to +control the PSE priority. Allowed priority value are between zero and +the value of ``ETHTOOL_A_PSE_PRIO_MAX`` attribute. + +A lower value indicates a higher priority, meaning that a priority value +of 0 corresponds to the highest port priority. +Port priority serves two functions: + + - Power-up Order: After a reset, ports are powered up in order of their + priority from highest to lowest. Ports with higher priority + (lower values) power up first. + - Shutdown Order: When the power budget is exceeded, ports with lower + priority (higher values) are turned off first. + +PSE_NTF +======= + +Notify PSE events. + +Notification contents: + + =============================== ====== ======================== + ``ETHTOOL_A_PSE_HEADER`` nested request header + ``ETHTOOL_A_PSE_EVENTS`` bitset PSE events + =============================== ====== ======================== + +When set, the optional ``ETHTOOL_A_PSE_EVENTS`` attribute identifies the +PSE events. + +.. kernel-doc:: include/uapi/linux/ethtool_netlink_generated.h + :identifiers: ethtool_pse_event + RSS_GET ======= |