summaryrefslogtreecommitdiff
path: root/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/powerpc/mpc52xx-device-tree-bindings.txt')
-rw-r--r--Documentation/powerpc/mpc52xx-device-tree-bindings.txt11
1 files changed, 11 insertions, 0 deletions
diff --git a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
index cda7a7dffa6d..6f12f1c79c0c 100644
--- a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
+++ b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
@@ -237,6 +237,17 @@ Each GPIO controller node should have the empty property gpio-controller and
according to the bit numbers in the GPIO control registers. The second cell
is for flags which is currently unsused.
+8) FEC nodes
+The FEC node can specify one of the following properties to configure
+the MII link:
+"fsl,7-wire-mode" - An empty property that specifies the link uses 7-wire
+ mode instead of MII
+"current-speed" - Specifies that the MII should be configured for a fixed
+ speed. This property should contain two cells. The
+ first cell specifies the speed in Mbps and the second
+ should be '0' for half duplex and '1' for full duplex
+"phy-handle" - Contains a phandle to an Ethernet PHY.
+
IV - Extra Notes
================