summaryrefslogtreecommitdiff
path: root/Documentation/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/scsi')
-rw-r--r--Documentation/scsi/ChangeLog.megaraid35
-rw-r--r--Documentation/scsi/scsi_mid_low_api.txt37
2 files changed, 63 insertions, 9 deletions
diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid
index 5331d91432c7..09f6300eda4b 100644
--- a/Documentation/scsi/ChangeLog.megaraid
+++ b/Documentation/scsi/ChangeLog.megaraid
@@ -1,3 +1,38 @@
+Release Date : Fri Nov 11 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com>
+Current Version : 2.20.4.7 (scsi module), 2.20.2.6 (cmm module)
+Older Version : 2.20.4.6 (scsi module), 2.20.2.6 (cmm module)
+
+1. Sorted out PCI IDs to remove megaraid support overlaps.
+ Based on the patch from Daniel, sorted out PCI IDs along with
+ charactor node name change from 'megadev' to 'megadev_legacy' to avoid
+ conflict.
+ ---
+ Hopefully we'll be getting the build restriction zapped much sooner,
+ but we should also be thinking about totally removing the hardware
+ support overlap in the megaraid drivers.
+
+ This patch pencils in a date of Feb 06 for this, and performs some
+ printk abuse in hope that existing legacy users might pick up on what's
+ going on.
+
+ Signed-off-by: Daniel Drake <dsd@gentoo.org>
+ ---
+
+2. Fixed a issue: megaraid always fails to reset handler.
+ ---
+ I found that the megaraid driver always fails to reset the
+ adapter with the following message:
+ megaraid: resetting the host...
+ megaraid mbox: reset sequence completed successfully
+ megaraid: fast sync command timed out
+ megaraid: reservation reset failed
+ when the "Cluster mode" of the adapter BIOS is enabled.
+ So, whenever the reset occurs, the adapter goes to
+ offline and just become unavailable.
+
+ Jun'ichi Nomura [mailto:jnomura@mtc.biglobe.ne.jp]
+ ---
+
Release Date : Mon Mar 07 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com>
Current Version : 2.20.4.6 (scsi module), 2.20.2.6 (cmm module)
Older Version : 2.20.4.5 (scsi module), 2.20.2.5 (cmm module)
diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt
index 3209b37e07ec..8bbae3e1abdf 100644
--- a/Documentation/scsi/scsi_mid_low_api.txt
+++ b/Documentation/scsi/scsi_mid_low_api.txt
@@ -150,7 +150,8 @@ scsi devices of which only the first 2 respond:
LLD mid level LLD
===-------------------=========--------------------===------
scsi_host_alloc() -->
-scsi_add_host() --------+
+scsi_add_host() ---->
+scsi_scan_host() -------+
|
slave_alloc()
slave_configure() --> scsi_adjust_queue_depth()
@@ -196,7 +197,7 @@ of the issues involved. See the section on reference counting below.
The hotplug concept may be extended to SCSI devices. Currently, when an
-HBA is added, the scsi_add_host() function causes a scan for SCSI devices
+HBA is added, the scsi_scan_host() function causes a scan for SCSI devices
attached to the HBA's SCSI transport. On newer SCSI transports the HBA
may become aware of a new SCSI device _after_ the scan has completed.
An LLD can use this sequence to make the mid level aware of a SCSI device:
@@ -372,7 +373,7 @@ names all start with "scsi_".
Summary:
scsi_activate_tcq - turn on tag command queueing
scsi_add_device - creates new scsi device (lu) instance
- scsi_add_host - perform sysfs registration and SCSI bus scan.
+ scsi_add_host - perform sysfs registration and set up transport class
scsi_adjust_queue_depth - change the queue depth on a SCSI device
scsi_assign_lock - replace default host_lock with given lock
scsi_bios_ptable - return copy of block device's partition table
@@ -386,6 +387,7 @@ Summary:
scsi_remove_device - detach and remove a SCSI device
scsi_remove_host - detach and remove all SCSI devices owned by host
scsi_report_bus_reset - report scsi _bus_ reset observed
+ scsi_scan_host - scan SCSI bus
scsi_track_queue_full - track successive QUEUE_FULL events
scsi_unblock_requests - allow further commands to be queued to given host
scsi_unregister - [calls scsi_host_put()]
@@ -425,10 +427,10 @@ void scsi_activate_tcq(struct scsi_device *sdev, int depth)
* Might block: yes
*
* Notes: This call is usually performed internally during a scsi
- * bus scan when an HBA is added (i.e. scsi_add_host()). So it
+ * bus scan when an HBA is added (i.e. scsi_scan_host()). So it
* should only be called if the HBA becomes aware of a new scsi
- * device (lu) after scsi_add_host() has completed. If successful
- * this call we lead to slave_alloc() and slave_configure() callbacks
+ * device (lu) after scsi_scan_host() has completed. If successful
+ * this call can lead to slave_alloc() and slave_configure() callbacks
* into the LLD.
*
* Defined in: drivers/scsi/scsi_scan.c
@@ -439,7 +441,7 @@ struct scsi_device * scsi_add_device(struct Scsi_Host *shost,
/**
- * scsi_add_host - perform sysfs registration and SCSI bus scan.
+ * scsi_add_host - perform sysfs registration and set up transport class
* @shost: pointer to scsi host instance
* @dev: pointer to struct device of type scsi class
*
@@ -448,7 +450,11 @@ struct scsi_device * scsi_add_device(struct Scsi_Host *shost,
* Might block: no
*
* Notes: Only required in "hotplug initialization model" after a
- * successful call to scsi_host_alloc().
+ * successful call to scsi_host_alloc(). This function does not
+ * scan the bus; this can be done by calling scsi_scan_host() or
+ * in some other transport-specific way. The LLD must set up
+ * the transport template before calling this function and may only
+ * access the transport class data after this function has been called.
*
* Defined in: drivers/scsi/hosts.c
**/
@@ -559,7 +565,7 @@ void scsi_deactivate_tcq(struct scsi_device *sdev, int depth)
* area for the LLD's exclusive use.
* Both associated refcounting objects have their refcount set to 1.
* Full registration (in sysfs) and a bus scan are performed later when
- * scsi_add_host() is called.
+ * scsi_add_host() and scsi_scan_host() are called.
*
* Defined in: drivers/scsi/hosts.c .
**/
@@ -699,6 +705,19 @@ void scsi_report_bus_reset(struct Scsi_Host * shost, int channel)
/**
+ * scsi_scan_host - scan SCSI bus
+ * @shost: a pointer to a scsi host instance
+ *
+ * Might block: yes
+ *
+ * Notes: Should be called after scsi_add_host()
+ *
+ * Defined in: drivers/scsi/scsi_scan.c
+ **/
+void scsi_scan_host(struct Scsi_Host *shost)
+
+
+/**
* scsi_track_queue_full - track successive QUEUE_FULL events on given
* device to determine if and when there is a need
* to adjust the queue depth on the device.