diff options
Diffstat (limited to 'Documentation/scsi')
| -rw-r--r-- | Documentation/scsi/BusLogic.txt | 2 | ||||
| -rw-r--r-- | Documentation/scsi/ChangeLog.lpfc | 16 | ||||
| -rw-r--r-- | Documentation/scsi/ChangeLog.megaraid | 2 | ||||
| -rw-r--r-- | Documentation/scsi/ChangeLog.megaraid_sas | 16 | ||||
| -rw-r--r-- | Documentation/scsi/FlashPoint.txt | 6 | ||||
| -rw-r--r-- | Documentation/scsi/Mylex.txt | 2 | ||||
| -rw-r--r-- | Documentation/scsi/NinjaSCSI.txt | 2 | ||||
| -rw-r--r-- | Documentation/scsi/aic79xx.txt | 2 | ||||
| -rw-r--r-- | Documentation/scsi/aic7xxx.txt | 2 | ||||
| -rw-r--r-- | Documentation/scsi/dtc3x80.txt | 2 | ||||
| -rw-r--r-- | Documentation/scsi/hpsa.txt | 107 | ||||
| -rw-r--r-- | Documentation/scsi/ibmmca.txt | 2 | ||||
| -rw-r--r-- | Documentation/scsi/ncr53c8xx.txt | 2 | ||||
| -rw-r--r-- | Documentation/scsi/osst.txt | 4 | ||||
| -rw-r--r-- | Documentation/scsi/ppa.txt | 6 | ||||
| -rw-r--r-- | Documentation/scsi/scsi-generic.txt | 8 | ||||
| -rw-r--r-- | Documentation/scsi/scsi-parameters.txt | 139 | ||||
| -rw-r--r-- | Documentation/scsi/scsi.txt | 4 | ||||
| -rw-r--r-- | Documentation/scsi/scsi_fc_transport.txt | 4 | ||||
| -rw-r--r-- | Documentation/scsi/scsi_mid_low_api.txt | 2 | ||||
| -rw-r--r-- | Documentation/scsi/sym53c8xx_2.txt | 2 |
21 files changed, 296 insertions, 36 deletions
diff --git a/Documentation/scsi/BusLogic.txt b/Documentation/scsi/BusLogic.txt index 98023baa0f0d..d7fbc9488b98 100644 --- a/Documentation/scsi/BusLogic.txt +++ b/Documentation/scsi/BusLogic.txt @@ -47,7 +47,7 @@ tune driver performance and error recovery to their particular needs. The latest information on Linux support for BusLogic SCSI Host Adapters, as well as the most recent release of this driver and the latest firmware for the BT-948/958/958D, will always be available from my Linux Home Page at URL -"http://www.dandelion.com/Linux/". +"http://sourceforge.net/projects/dandelion/". Bug reports should be sent via electronic mail to "lnz@dandelion.com". Please include with the bug report the complete configuration messages reported by the diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc index ff19a52fe004..337c924cc81f 100644 --- a/Documentation/scsi/ChangeLog.lpfc +++ b/Documentation/scsi/ChangeLog.lpfc @@ -707,7 +707,7 @@ Changes from 20040920 to 20041018 * Integrate patches from Christoph Hellwig: two new helpers common to lpfc_sli_resume_iocb and lpfc_sli_issue_iocb - singificant cleanup of those two functions - the unused SLI_IOCB_USE_TXQ is - gone - lpfc_sli_issue_iocb_wait loses it's flags argument + gone - lpfc_sli_issue_iocb_wait loses its flags argument totally. * Fix in lpfc_sli.c: we can not store a 5 bit value in a 4-bit field. @@ -807,7 +807,7 @@ Changes from 20040908 to 20040920 lpfc_disc_done/lpfc_do_dpc cleanup - lpfc_disc_done can return void - move lpfc_do_dpc and lpfc_disc_done to lpfc_hbadisc.c - remove checking of list emptiness before calling lpfc_disc_done, - it handles the emtpy list case just fine and the additional + it handles the empty list case just fine and the additional instructions cost less then the bustlocked spinlock operations. * Integrated patch from Christoph Hellwig: This adds a new 64bit counter instead, brd_no isn't reused anymore. Also some tiny @@ -989,8 +989,8 @@ Changes from 20040709 to 20040716 * Remove redundant port_cmp != 2 check in if (!port_cmp) { .... if (port_cmp != 2).... } * Clock changes: removed struct clk_data and timerList. - * Clock changes: seperate nodev_tmo and els_retry_delay into 2 - seperate timers and convert to 1 argument changed + * Clock changes: separate nodev_tmo and els_retry_delay into 2 + separate timers and convert to 1 argument changed LPFC_NODE_FARP_PEND_t to struct lpfc_node_farp_pend convert ipfarp_tmo to 1 argument convert target struct tmofunc and rtplunfunc to 1 argument * cr_count, cr_delay and @@ -1028,7 +1028,7 @@ Changes from 20040614 to 20040709 * Remove the need for buf_tmo. * Changed ULP_BDE64 to struct ulp_bde64. * Changed ULP_BDE to struct ulp_bde. - * Cleanup lpfc_os_return_scsi_cmd() and it's call path. + * Cleanup lpfc_os_return_scsi_cmd() and its call path. * Removed lpfc_no_device_delay. * Consolidating lpfc_hba_put_event() into lpfc_put_event(). * Removed following attributes and their functionality: @@ -1514,7 +1514,7 @@ Changes from 20040402 to 20040409 * Remove unused elxclock declaration in elx_sli.h. * Since everywhere IOCB_ENTRY is used, the return value is cast, move the cast into the macro. - * Split ioctls out into seperate files + * Split ioctls out into separate files Changes from 20040326 to 20040402 @@ -1534,7 +1534,7 @@ Changes from 20040326 to 20040402 * Unused variable cleanup * Use Linux list macros for DMABUF_t * Break up ioctls into 3 sections, dfc, util, hbaapi - rearranged code so this could be easily seperated into a + rearranged code so this could be easily separated into a differnet module later All 3 are currently turned on by defines in lpfc_ioctl.c LPFC_DFC_IOCTL, LPFC_UTIL_IOCTL, LPFC_HBAAPI_IOCTL @@ -1551,7 +1551,7 @@ Changes from 20040326 to 20040402 started by lpfc_online(). lpfc_offline() only stopped els_timeout routine. It now stops all timeout routines associated with that hba. - * Replace seperate next and prev pointers in struct + * Replace separate next and prev pointers in struct lpfc_bindlist with list_head type. In elxHBA_t, replace fc_nlpbind_start and _end with fc_nlpbind_list and use list_head macros to access it. diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid index 38e9e7cadc90..5e07d320817d 100644 --- a/Documentation/scsi/ChangeLog.megaraid +++ b/Documentation/scsi/ChangeLog.megaraid @@ -215,7 +215,7 @@ Older Version : 2.20.4.5 (scsi module), 2.20.2.5 (cmm module) 3. Convert pci_module_init to pci_register_driver Convert from pci_module_init to pci_register_driver - (from:http://kerneljanitors.org/TODO) + (from:http://kernelnewbies.org/KernelJanitors/TODO) - Signed-off-by: Domen Puncer <domen@coderock.org> 4. Use the pre defined DMA mask constants from dma-mapping.h diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas index 17ffa0607712..30023568805e 100644 --- a/Documentation/scsi/ChangeLog.megaraid_sas +++ b/Documentation/scsi/ChangeLog.megaraid_sas @@ -1,3 +1,19 @@ +1 Release Date : Thur. Oct 29, 2009 09:12:45 PST 2009 - + (emaild-id:megaraidlinux@lsi.com) + Bo Yang + +2 Current Version : 00.00.04.17.1-rc1 +3 Older Version : 00.00.04.12 + +1. Add the pad_0 in mfi frame structure to 0 to fix the + context value larger than 32bit value issue. + +2. Add the logic drive list to the driver. Driver will + keep the logic drive list internal after driver load. + +3. driver fixed the device update issue after get the AEN + PD delete/ADD, LD add/delete from FW. + 1 Release Date : Tues. July 28, 2009 10:12:45 PST 2009 - (emaild-id:megaraidlinux@lsi.com) Bo Yang diff --git a/Documentation/scsi/FlashPoint.txt b/Documentation/scsi/FlashPoint.txt index d5acaa300a46..5b5f29cb9f8b 100644 --- a/Documentation/scsi/FlashPoint.txt +++ b/Documentation/scsi/FlashPoint.txt @@ -13,7 +13,7 @@ operating system support to its BusLogic brand of FlashPoint Ultra SCSI host adapters. All of BusLogic's other SCSI host adapters, including the MultiMaster line, currently support the Linux operating system. Linux drivers and information will be available on October 15th at -http://www.dandelion.com/Linux/. +http://sourceforge.net/projects/dandelion/. "Mylex is committed to supporting the Linux community," says Peter Shambora, vice president of marketing for Mylex. "We have supported Linux driver @@ -27,7 +27,7 @@ Linux is a freely-distributed implementation of UNIX for Intel x86, Sun SPARC, SGI MIPS, Motorola 68k, Digital Alpha AXP and Motorola PowerPC machines. It supports a wide range of software, including the X Window System, Emacs, and TCP/IP networking. Further information is available at -http://www.linux.org and http://www.ssc.com/linux. +http://www.linux.org and http://www.ssc.com/. FlashPoint Host Adapters @@ -71,7 +71,7 @@ peters@mylex.com Ever since its introduction last October, the BusLogic FlashPoint LT has been problematic for members of the Linux community, in that no Linux -drivers have been available for this new Ultra SCSI product. Despite it's +drivers have been available for this new Ultra SCSI product. Despite its officially being positioned as a desktop workstation product, and not being particularly well suited for a high performance multitasking operating system like Linux, the FlashPoint LT has been touted by computer system diff --git a/Documentation/scsi/Mylex.txt b/Documentation/scsi/Mylex.txt index cdf69293f7d5..3797f3e6c2b5 100644 --- a/Documentation/scsi/Mylex.txt +++ b/Documentation/scsi/Mylex.txt @@ -2,4 +2,4 @@ Please see the file README.BusLogic for information about Linux support for Mylex (formerly BusLogic) MultiMaster and FlashPoint SCSI Host Adapters. The Mylex DAC960 PCI RAID Controllers are now supported. Please consult -http://www.dandelion.com/Linux/ for further information on the DAC960 driver. +http://sourceforge.net/projects/dandelion for further information on the DAC960 driver. diff --git a/Documentation/scsi/NinjaSCSI.txt b/Documentation/scsi/NinjaSCSI.txt index 3229b64cf24e..ac8db8ceec77 100644 --- a/Documentation/scsi/NinjaSCSI.txt +++ b/Documentation/scsi/NinjaSCSI.txt @@ -3,8 +3,6 @@ 1. Comment This is Workbit corp.'s(http://www.workbit.co.jp/) NinjaSCSI-3 -(http://www.workbit.co.jp/ts/z_nj3r.html) and NinjaSCSI-32Bi -(http://www.workbit.co.jp/ts/z_njsc32bi.html) PCMCIA card driver module for Linux. 2. My Linux environment diff --git a/Documentation/scsi/aic79xx.txt b/Documentation/scsi/aic79xx.txt index c014eccaf19f..16e054c9c70b 100644 --- a/Documentation/scsi/aic79xx.txt +++ b/Documentation/scsi/aic79xx.txt @@ -447,7 +447,7 @@ The following information is available in this file: http://www.adaptec.com/buy-cables/. Europe - - Visit our Web site at http://www.adaptec-europe.com/. + - Visit our Web site at http://www.adaptec.com/en-US/_common/world_index. - To speak with a Technical Support Specialist, call, or email, * German: +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET, http://ask-de.adaptec.com/. diff --git a/Documentation/scsi/aic7xxx.txt b/Documentation/scsi/aic7xxx.txt index b7e238cbb5a7..18f8d1905e6a 100644 --- a/Documentation/scsi/aic7xxx.txt +++ b/Documentation/scsi/aic7xxx.txt @@ -344,7 +344,7 @@ The following information is available in this file: http://www.adaptec.com/buy-cables/. Europe - - Visit our Web site at http://www.adaptec-europe.com/. + - Visit our Web site at http://www.adaptec.com/en-US/_common/world_index. - To speak with a Technical Support Specialist, call, or email, * German: +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET, http://ask-de.adaptec.com/. diff --git a/Documentation/scsi/dtc3x80.txt b/Documentation/scsi/dtc3x80.txt index e8ae6230ab3e..1d7af9f9a8ed 100644 --- a/Documentation/scsi/dtc3x80.txt +++ b/Documentation/scsi/dtc3x80.txt @@ -12,7 +12,7 @@ The 3180 does not. Otherwise, they are identical. The DTC3x80 does not support DMA but it does have Pseudo-DMA which is supported by the driver. -It's DTC406 scsi chip is supposedly compatible with the NCR 53C400. +Its DTC406 scsi chip is supposedly compatible with the NCR 53C400. It is memory mapped, uses an IRQ, but no dma or io-port. There is internal DMA, between SCSI bus and an on-chip 128-byte buffer. Double buffering is done automagically by the chip. Data is transferred diff --git a/Documentation/scsi/hpsa.txt b/Documentation/scsi/hpsa.txt new file mode 100644 index 000000000000..dca658362cbf --- /dev/null +++ b/Documentation/scsi/hpsa.txt @@ -0,0 +1,107 @@ + +HPSA - Hewlett Packard Smart Array driver +----------------------------------------- + +This file describes the hpsa SCSI driver for HP Smart Array controllers. +The hpsa driver is intended to supplant the cciss driver for newer +Smart Array controllers. The hpsa driver is a SCSI driver, while the +cciss driver is a "block" driver. Actually cciss is both a block +driver (for logical drives) AND a SCSI driver (for tape drives). This +"split-brained" design of the cciss driver is a source of excess +complexity and eliminating that complexity is one of the reasons +for hpsa to exist. + +Supported devices: +------------------ + +Smart Array P212 +Smart Array P410 +Smart Array P410i +Smart Array P411 +Smart Array P812 +Smart Array P712m +Smart Array P711m +StorageWorks P1210m + +Additionally, older Smart Arrays may work with the hpsa driver if the kernel +boot parameter "hpsa_allow_any=1" is specified, however these are not tested +nor supported by HP with this driver. For older Smart Arrays, the cciss +driver should still be used. + +HPSA specific entries in /sys +----------------------------- + + In addition to the generic SCSI attributes available in /sys, hpsa supports + the following attributes: + + HPSA specific host attributes: + ------------------------------ + + /sys/class/scsi_host/host*/rescan + /sys/class/scsi_host/host*/firmware_revision + + the host "rescan" attribute is a write only attribute. Writing to this + attribute will cause the driver to scan for new, changed, or removed devices + (e.g. hot-plugged tape drives, or newly configured or deleted logical drives, + etc.) and notify the SCSI midlayer of any changes detected. Normally this is + triggered automatically by HP's Array Configuration Utility (either the GUI or + command line variety) so for logical drive changes, the user should not + normally have to use this. It may be useful when hot plugging devices like + tape drives, or entire storage boxes containing pre-configured logical drives. + + The "firmware_revision" attribute contains the firmware version of the Smart Array. + For example: + + root@host:/sys/class/scsi_host/host4# cat firmware_revision + 7.14 + + HPSA specific disk attributes: + ------------------------------ + + /sys/class/scsi_disk/c:b:t:l/device/unique_id + /sys/class/scsi_disk/c:b:t:l/device/raid_level + /sys/class/scsi_disk/c:b:t:l/device/lunid + + (where c:b:t:l are the controller, bus, target and lun of the device) + + For example: + + root@host:/sys/class/scsi_disk/4:0:0:0/device# cat unique_id + 600508B1001044395355323037570F77 + root@host:/sys/class/scsi_disk/4:0:0:0/device# cat lunid + 0x0000004000000000 + root@host:/sys/class/scsi_disk/4:0:0:0/device# cat raid_level + RAID 0 + +HPSA specific ioctls: +--------------------- + + For compatibility with applications written for the cciss driver, many, but + not all of the ioctls supported by the cciss driver are also supported by the + hpsa driver. The data structures used by these are described in + include/linux/cciss_ioctl.h + + CCISS_DEREGDISK + CCISS_REGNEWDISK + CCISS_REGNEWD + + The above three ioctls all do exactly the same thing, which is to cause the driver + to rescan for new devices. This does exactly the same thing as writing to the + hpsa specific host "rescan" attribute. + + CCISS_GETPCIINFO + + Returns PCI domain, bus, device and function and "board ID" (PCI subsystem ID). + + CCISS_GETDRIVVER + + Returns driver version in three bytes encoded as: + (major_version << 16) | (minor_version << 8) | (subminor_version) + + CCISS_PASSTHRU + CCISS_BIG_PASSTHRU + + Allows "BMIC" and "CISS" commands to be passed through to the Smart Array. + These are used extensively by the HP Array Configuration Utility, SNMP storage + agents, etc. See cciss_vol_status at http://cciss.sf.net for some examples. + diff --git a/Documentation/scsi/ibmmca.txt b/Documentation/scsi/ibmmca.txt index 3920f28710c4..45d61ad8c6f7 100644 --- a/Documentation/scsi/ibmmca.txt +++ b/Documentation/scsi/ibmmca.txt @@ -1109,7 +1109,7 @@ Q: Where can I find the latest info about this driver? A: See the file MAINTAINERS for the current WWW-address, which offers updates, info and Q/A lists. At this file's origin, the webaddress - was: http://www.uni-mainz.de/~langm000/linux.html + was: http://www.staff.uni-mainz.de/mlang/linux.html Q: My SCSI-adapter is not recognized by the driver, what can I do? A: Just force it to be recognized by kernel parameters. See section 5.1. If this really happens, do also send e-mail to the maintainer, as diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt index 08e2b4d04aab..cda5f8fa2c66 100644 --- a/Documentation/scsi/ncr53c8xx.txt +++ b/Documentation/scsi/ncr53c8xx.txt @@ -1479,7 +1479,7 @@ Wide16 SCSI. Enabling serial NVRAM support enables detection of the serial NVRAM included on Symbios and some Symbios compatible host adaptors, and Tekram boards. The serial NVRAM is used by Symbios and Tekram to hold set up parameters for the -host adaptor and it's attached drives. +host adaptor and its attached drives. The Symbios NVRAM also holds data on the boot order of host adaptors in a system with more than one host adaptor. This enables the order of scanning diff --git a/Documentation/scsi/osst.txt b/Documentation/scsi/osst.txt index f536907e241d..ad86c6d1e898 100644 --- a/Documentation/scsi/osst.txt +++ b/Documentation/scsi/osst.txt @@ -40,7 +40,7 @@ behavior looks very much the same as st to the userspace applications. History ------- -In the first place, osst shared it's identity very much with st. That meant +In the first place, osst shared its identity very much with st. That meant that it used the same kernel structures and the same device node as st. So you could only have either of them being present in the kernel. This has been fixed by registering an own device, now. @@ -135,7 +135,7 @@ The driver development is coordinated through a mailing list a CVS repository and some web pages. The tester's pages which contain recent news and updated drivers to download can be found on -http://linux1.onstream.nl/test/ +http://sourceforge.net/projects/osst/ If you find any problems, please have a look at the tester's page in order to see whether the problem is already known and solved. Otherwise, please diff --git a/Documentation/scsi/ppa.txt b/Documentation/scsi/ppa.txt index 067ac394e0b2..05ff47dbe8d1 100644 --- a/Documentation/scsi/ppa.txt +++ b/Documentation/scsi/ppa.txt @@ -1,13 +1,13 @@ -------- Terse where to get ZIP Drive help info -------- General Iomega ZIP drive page for Linux: -http://www.torque.net/~campbell/ +http://web.archive.org/web/*/http://www.torque.net/~campbell/ Driver archive for old drivers: -http://www.torque.net/~campbell/ppa/ +http://web.archive.org/web/*/http://www.torque.net/~campbell/ppa Linux Parport page (parallel port) -http://www.torque.net/parport/ +http://web.archive.org/web/*/http://www.torque.net/parport/ Email list for Linux Parport linux-parport@torque.net diff --git a/Documentation/scsi/scsi-generic.txt b/Documentation/scsi/scsi-generic.txt index c38e2b3648e4..0a22ab8ea0c1 100644 --- a/Documentation/scsi/scsi-generic.txt +++ b/Documentation/scsi/scsi-generic.txt @@ -34,11 +34,11 @@ http://www.tldp.org/HOWTO/SCSI-Generic-HOWTO This describes the sg version 3 driver found in the lk 2.4 series. The LDP renders documents in single and multiple page HTML, postscript and pdf. This document can also be found at: -http://www.torque.net/sg/p/sg_v3_ho.html +http://sg.danny.cz/sg/p/sg_v3_ho.html Documentation for the version 2 sg driver found in the lk 2.2 series can -be found at http://www.torque.net/sg/p/scsi-generic.txt . A larger version -is at: http://www.torque.net/sg/p/scsi-generic_long.txt . +be found at http://sg.danny.cz/sg/. A larger version +is at: http://sg.danny.cz/sg/p/scsi-generic_long.txt. The original documentation for the sg driver (prior to lk 2.2.6) can be found at http://www.torque.net/sg/p/original/SCSI-Programming-HOWTO.txt @@ -61,7 +61,7 @@ There are two packages of sg utilities: - sg_utils for the sg version 2 (and original) driver found in lk 2.2 and earlier Both packages will work in the lk 2.4 series however sg3_utils offers more -capabilities. They can be found at: http://www.torque.net/sg and +capabilities. They can be found at: http://sg.danny.cz/sg/sg3_utils.html and freshmeat.net Another approach is to look at the applications that use the sg driver. diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt new file mode 100644 index 000000000000..21e5798526ee --- /dev/null +++ b/Documentation/scsi/scsi-parameters.txt @@ -0,0 +1,139 @@ + SCSI Kernel Parameters + ~~~~~~~~~~~~~~~~~~~~~~ + +See Documentation/kernel-parameters.txt for general information on +specifying module parameters. + +This document may not be entirely up to date and comprehensive. The command +"modinfo -p ${modulename}" shows a current list of all parameters of a loadable +module. Loadable modules, after being loaded into the running kernel, also +reveal their parameters in /sys/module/${modulename}/parameters/. Some of these +parameters may be changed at runtime by the command +"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}". + + + advansys= [HW,SCSI] + See header of drivers/scsi/advansys.c. + + aha152x= [HW,SCSI] + See Documentation/scsi/aha152x.txt. + + aha1542= [HW,SCSI] + Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]] + + aic7xxx= [HW,SCSI] + See Documentation/scsi/aic7xxx.txt. + + aic79xx= [HW,SCSI] + See Documentation/scsi/aic79xx.txt. + + atascsi= [HW,SCSI] Atari SCSI + + BusLogic= [HW,SCSI] + See drivers/scsi/BusLogic.c, comment before function + BusLogic_ParseDriverOptions(). + + dtc3181e= [HW,SCSI] + + eata= [HW,SCSI] + + fd_mcs= [HW,SCSI] + See header of drivers/scsi/fd_mcs.c. + + fdomain= [HW,SCSI] + See header of drivers/scsi/fdomain.c. + + gdth= [HW,SCSI] + See header of drivers/scsi/gdth.c. + + gvp11= [HW,SCSI] + + ibmmcascsi= [HW,MCA,SCSI] IBM MicroChannel SCSI adapter + See Documentation/mca.txt. + + in2000= [HW,SCSI] + See header of drivers/scsi/in2000.c. + + ips= [HW,SCSI] Adaptec / IBM ServeRAID controller + See header of drivers/scsi/ips.c. + + mac5380= [HW,SCSI] Format: + <can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags> + + max_luns= [SCSI] Maximum number of LUNs to probe. + Should be between 1 and 2^32-1. + + max_report_luns= + [SCSI] Maximum number of LUNs received. + Should be between 1 and 16384. + + NCR_D700= [HW,SCSI] + See header of drivers/scsi/NCR_D700.c. + + ncr5380= [HW,SCSI] + + ncr53c400= [HW,SCSI] + + ncr53c400a= [HW,SCSI] + + ncr53c406a= [HW,SCSI] + + ncr53c8xx= [HW,SCSI] + + nodisconnect [HW,SCSI,M68K] Disables SCSI disconnects. + + osst= [HW,SCSI] SCSI Tape Driver + Format: <buffer_size>,<write_threshold> + See also Documentation/scsi/st.txt. + + pas16= [HW,SCSI] + See header of drivers/scsi/pas16.c. + + scsi_debug_*= [SCSI] + See drivers/scsi/scsi_debug.c. + + scsi_default_dev_flags= + [SCSI] SCSI default device flags + Format: <integer> + + scsi_dev_flags= [SCSI] Black/white list entry for vendor and model + Format: <vendor>:<model>:<flags> + (flags are integer value) + + scsi_logging_level= [SCSI] a bit mask of logging levels + See drivers/scsi/scsi_logging.h for bits. Also + settable via sysctl at dev.scsi.logging_level + (/proc/sys/dev/scsi/logging_level). + There is also a nice 'scsi_logging_level' script in the + S390-tools package, available for download at + http://www-128.ibm.com/developerworks/linux/linux390/s390-tools-1.5.4.html + + scsi_mod.scan= [SCSI] sync (default) scans SCSI busses as they are + discovered. async scans them in kernel threads, + allowing boot to proceed. none ignores them, expecting + user space to do the scan. + + sim710= [SCSI,HW] + See header of drivers/scsi/sim710.c. + + st= [HW,SCSI] SCSI tape parameters (buffers, etc.) + See Documentation/scsi/st.txt. + + sym53c416= [HW,SCSI] + See header of drivers/scsi/sym53c416.c. + + t128= [HW,SCSI] + See header of drivers/scsi/t128.c. + + tmscsim= [HW,SCSI] + See comment before function dc390_setup() in + drivers/scsi/tmscsim.c. + + u14-34f= [HW,SCSI] UltraStor 14F/34F SCSI host adapter + See header of drivers/scsi/u14-34f.c. + + wd33c93= [HW,SCSI] + See header of drivers/scsi/wd33c93.c. + + wd7000= [HW,SCSI] + See header of drivers/scsi/wd7000.c. diff --git a/Documentation/scsi/scsi.txt b/Documentation/scsi/scsi.txt index dd1bbf4e98e3..3d99d38cb62a 100644 --- a/Documentation/scsi/scsi.txt +++ b/Documentation/scsi/scsi.txt @@ -4,8 +4,8 @@ The Linux Documentation Project (LDP) maintains a document describing the SCSI subsystem in the Linux kernel (lk) 2.4 series. See: http://www.tldp.org/HOWTO/SCSI-2.4-HOWTO . The LDP has single and multiple page HTML renderings as well as postscript and pdf. -It can also be found at http://www.torque.net/scsi/SCSI-2.4-HOWTO . - +It can also be found at: +http://web.archive.org/web/*/http://www.torque.net/scsi/SCSI-2.4-HOWTO Notes on using modules in the SCSI subsystem ============================================ diff --git a/Documentation/scsi/scsi_fc_transport.txt b/Documentation/scsi/scsi_fc_transport.txt index aec6549ab097..e00192de4d1c 100644 --- a/Documentation/scsi/scsi_fc_transport.txt +++ b/Documentation/scsi/scsi_fc_transport.txt @@ -70,7 +70,7 @@ Overview: up to an administrative entity controlling the vport. For example, if vports are to be associated with virtual machines, a XEN mgmt utility would be responsible for creating wwpn/wwnn's for the vport, - using it's own naming authority and OUI. (Note: it already does this + using its own naming authority and OUI. (Note: it already does this for virtual MAC addresses). @@ -81,7 +81,7 @@ Device Trees and Vport Objects: with rports and scsi target objects underneath it. Currently the FC transport creates the vport object and places it under the scsi_host object corresponding to the physical adapter. The LLDD will allocate - a new scsi_host for the vport and link it's object under the vport. + a new scsi_host for the vport and link its object under the vport. The remainder of the tree under the vports scsi_host is the same as the non-NPIV case. The transport is written currently to easily allow the parent of the vport to be something other than the scsi_host. diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt index de67229251d8..570ef2b3d79b 100644 --- a/Documentation/scsi/scsi_mid_low_api.txt +++ b/Documentation/scsi/scsi_mid_low_api.txt @@ -43,7 +43,7 @@ There is a SCSI documentation directory within the kernel source tree, typically Documentation/scsi . Most documents are in plain (i.e. ASCII) text. This file is named scsi_mid_low_api.txt and can be found in that directory. A more recent copy of this document may be found -at http://www.torque.net/scsi/scsi_mid_low_api.txt.gz . +at http://web.archive.org/web/20070107183357rn_1/sg.torque.net/scsi/. Many LLDs are documented there (e.g. aic7xxx.txt). The SCSI mid-level is briefly described in scsi.txt which contains a url to a document describing the SCSI subsystem in the lk 2.4 series. Two upper level diff --git a/Documentation/scsi/sym53c8xx_2.txt b/Documentation/scsi/sym53c8xx_2.txt index eb9a7b905b64..6f63b7989679 100644 --- a/Documentation/scsi/sym53c8xx_2.txt +++ b/Documentation/scsi/sym53c8xx_2.txt @@ -687,7 +687,7 @@ maintain the driver code. Enabling serial NVRAM support enables detection of the serial NVRAM included on Symbios and some Symbios compatible host adaptors, and Tekram boards. The serial NVRAM is used by Symbios and Tekram to hold set up parameters for the -host adaptor and it's attached drives. +host adaptor and its attached drives. The Symbios NVRAM also holds data on the boot order of host adaptors in a system with more than one host adaptor. This information is no longer used |