summaryrefslogtreecommitdiff
path: root/Documentation/sound/alsa/ALSA-Configuration.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/sound/alsa/ALSA-Configuration.txt')
-rw-r--r--Documentation/sound/alsa/ALSA-Configuration.txt44
1 files changed, 20 insertions, 24 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 104a994b8289..a18ecb92b356 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -636,11 +636,16 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
3stack-digout 3-jack in back, a HP out and a SPDIF out
5stack 5-jack in back, 2-jack in front
5stack-digout 5-jack in back, 2-jack in front, a SPDIF out
+ 6stack 6-jack in back, 2-jack in front
+ 6stack-digout 6-jack with a SPDIF out
w810 3-jack
z71v 3-jack (HP shared SPDIF)
asus 3-jack
uniwill 3-jack
F1734 2-jack
+ test for testing/debugging purpose, almost all controls can be
+ adjusted. Appearing only when compiled with
+ $CONFIG_SND_DEBUG=y
CMI9880
minimal 3-jack in back
@@ -1054,6 +1059,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
The power-management is supported.
+ Module snd-pxa2xx-ac97 (on arm only)
+ ------------------------------------
+
+ Module for AC97 driver for the Intel PXA2xx chip
+
+ For ARM architecture only.
+
Module snd-rme32
----------------
@@ -1173,6 +1185,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module supports up to 8 cards.
+ Module snd-sun-dbri (on sparc only)
+ -----------------------------------
+
+ Module for DBRI sound chips found on Sparcs.
+
+ Module supports up to 8 cards.
+
Module snd-wavefront
--------------------
@@ -1371,7 +1390,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module snd-vxpocket
-------------------
- Module for Digigram VX-Pocket VX2 PCMCIA card.
+ Module for Digigram VX-Pocket VX2 and 440 PCMCIA cards.
ibl - Capture IBL size. (default = 0, minimum size)
@@ -1391,29 +1410,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Note: the driver is build only when CONFIG_ISA is set.
- Module snd-vxp440
- -----------------
-
- Module for Digigram VX-Pocket 440 PCMCIA card.
-
- ibl - Capture IBL size. (default = 0, minimum size)
-
- Module supports up to 8 cards. The module is compiled only when
- PCMCIA is supported on kernel.
-
- To activate the driver via the card manager, you'll need to set
- up /etc/pcmcia/vxp440.conf. See the sound/pcmcia/vx/vxp440.c.
-
- When the driver is compiled as a module and the hotplug firmware
- is supported, the firmware data is loaded via hotplug automatically.
- Install the necessary firmware files in alsa-firmware package.
- When no hotplug fw loader is available, you need to load the
- firmware via vxloader utility in alsa-tools package.
-
- About capture IBL, see the description of snd-vx222 module.
-
- Note: the driver is build only when CONFIG_ISA is set.
-
Module snd-ymfpci
-----------------