diff options
Diffstat (limited to 'Documentation/sound/alsa/hda_codec.txt')
| -rw-r--r-- | Documentation/sound/alsa/hda_codec.txt | 299 |
1 files changed, 299 insertions, 0 deletions
diff --git a/Documentation/sound/alsa/hda_codec.txt b/Documentation/sound/alsa/hda_codec.txt new file mode 100644 index 000000000000..e9d07b8f1acb --- /dev/null +++ b/Documentation/sound/alsa/hda_codec.txt @@ -0,0 +1,299 @@ +Notes on Universal Interface for Intel High Definition Audio Codec +------------------------------------------------------------------ + +Takashi Iwai <tiwai@suse.de> + + +[Still a draft version] + + +General +======= + +The snd-hda-codec module supports the generic access function for the +High Definition (HD) audio codecs. It's designed to be independent +from the controller code like ac97 codec module. The real accessors +from/to the controller must be implemented in the lowlevel driver. + +The structure of this module is similar with ac97_codec module. +Each codec chip belongs to a bus class which communicates with the +controller. + + +Initialization of Bus Instance +============================== + +The card driver has to create struct hda_bus at first. The template +struct should be filled and passed to the constructor: + +struct hda_bus_template { + void *private_data; + struct pci_dev *pci; + const char *modelname; + struct hda_bus_ops ops; +}; + +The card driver can set and use the private_data field to retrieve its +own data in callback functions. The pci field is used when the patch +needs to check the PCI subsystem IDs, so on. For non-PCI system, it +doesn't have to be set, of course. +The modelname field specifies the board's specific configuration. The +string is passed to the codec parser, and it depends on the parser how +the string is used. +These fields, private_data, pci and modelname are all optional. + +The ops field contains the callback functions as the following: + +struct hda_bus_ops { + int (*command)(struct hda_codec *codec, hda_nid_t nid, int direct, + unsigned int verb, unsigned int parm); + unsigned int (*get_response)(struct hda_codec *codec); + void (*private_free)(struct hda_bus *); +}; + +The command callback is called when the codec module needs to send a +VERB to the controller. It's always a single command. +The get_response callback is called when the codec requires the answer +for the last command. These two callbacks are mandatory and have to +be given. +The last, private_free callback, is optional. It's called in the +destructor to release any necessary data in the lowlevel driver. + +The bus instance is created via snd_hda_bus_new(). You need to pass +the card instance, the template, and the pointer to store the +resultant bus instance. + +int snd_hda_bus_new(snd_card_t *card, const struct hda_bus_template *temp, + struct hda_bus **busp); + +It returns zero if successful. A negative return value means any +error during creation. + + +Creation of Codec Instance +========================== + +Each codec chip on the board is then created on the BUS instance. +To create a codec instance, call snd_hda_codec_new(). + +int snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr, + struct hda_codec **codecp); + +The first argument is the BUS instance, the second argument is the +address of the codec, and the last one is the pointer to store the +resultant codec instance (can be NULL if not needed). + +The codec is stored in a linked list of bus instance. You can follow +the codec list like: + + struct list_head *p; + struct hda_codec *codec; + list_for_each(p, &bus->codec_list) { + codec = list_entry(p, struct hda_codec, list); + ... + } + +The codec isn't initialized at this stage properly. The +initialization sequence is called when the controls are built later. + + +Codec Access +============ + +To access codec, use snd_codec_read() and snd_codec_write(). +snd_hda_param_read() is for reading parameters. +For writing a sequence of verbs, use snd_hda_sequence_write(). + +To retrieve the number of sub nodes connected to the given node, use +snd_hda_get_sub_nodes(). The connection list can be obtained via +snd_hda_get_connections() call. + +When an unsolicited event happens, pass the event via +snd_hda_queue_unsol_event() so that the codec routines will process it +later. + + +(Mixer) Controls +================ + +To create mixer controls of all codecs, call +snd_hda_build_controls(). It then builds the mixers and does +initialization stuff on each codec. + + +PCM Stuff +========= + +snd_hda_build_pcms() gives the necessary information to create PCM +streams. When it's called, each codec belonging to the bus stores +codec->num_pcms and codec->pcm_info fields. The num_pcms indicates +the number of elements in pcm_info array. The card driver is supposed +to traverse the codec linked list, read the pcm information in +pcm_info array, and build pcm instances according to them. + +The pcm_info array contains the following record: + +/* PCM information for each substream */ +struct hda_pcm_stream { + unsigned int substreams; /* number of substreams, 0 = not exist */ + unsigned int channels_min; /* min. number of channels */ + unsigned int channels_max; /* max. number of channels */ + hda_nid_t nid; /* default NID to query rates/formats/bps, or set up */ + u32 rates; /* supported rates */ + u64 formats; /* supported formats (SNDRV_PCM_FMTBIT_) */ + unsigned int maxbps; /* supported max. bit per sample */ + struct hda_pcm_ops ops; +}; + +/* for PCM creation */ +struct hda_pcm { + char *name; + struct hda_pcm_stream stream[2]; +}; + +The name can be passed to snd_pcm_new(). The stream field contains +the information for playback (SNDRV_PCM_STREAM_PLAYBACK = 0) and +capture (SNDRV_PCM_STREAM_CAPTURE = 1) directions. The card driver +should pass substreams to snd_pcm_new() for the number of substreams +to create. + +The channels_min, channels_max, rates and formats should be copied to +runtime->hw record. They and maxbps fields are used also to compute +the format value for the HDA codec and controller. Call +snd_hda_calc_stream_format() to get the format value. + +The ops field contains the following callback functions: + +struct hda_pcm_ops { + int (*open)(struct hda_pcm_stream *info, struct hda_codec *codec, + snd_pcm_substream_t *substream); + int (*close)(struct hda_pcm_stream *info, struct hda_codec *codec, + snd_pcm_substream_t *substream); + int (*prepare)(struct hda_pcm_stream *info, struct hda_codec *codec, + unsigned int stream_tag, unsigned int format, + snd_pcm_substream_t *substream); + int (*cleanup)(struct hda_pcm_stream *info, struct hda_codec *codec, + snd_pcm_substream_t *substream); +}; + +All are non-NULL, so you can call them safely without NULL check. + +The open callback should be called in PCM open after runtime->hw is +set up. It may override some setting and constraints additionally. +Similarly, the close callback should be called in the PCM close. + +The prepare callback should be called in PCM prepare. This will set +up the codec chip properly for the operation. The cleanup should be +called in hw_free to clean up the configuration. + +The caller should check the return value, at least for open and +prepare callbacks. When a negative value is returned, some error +occurred. + + +Proc Files +========== + +Each codec dumps the widget node information in +/proc/asound/card*/codec#* file. This information would be really +helpful for debugging. Please provide its contents together with the +bug report. + + +Power Management +================ + +It's simple: +Call snd_hda_suspend() in the PM suspend callback. +Call snd_hda_resume() in the PM resume callback. + + +Codec Preset (Patch) +==================== + +To set up and handle the codec functionality fully, each codec may +have a codec preset (patch). It's defined in struct hda_codec_preset: + + struct hda_codec_preset { + unsigned int id; + unsigned int mask; + unsigned int subs; + unsigned int subs_mask; + unsigned int rev; + const char *name; + int (*patch)(struct hda_codec *codec); + }; + +When the codec id and codec subsystem id match with the given id and +subs fields bitwise (with bitmask mask and subs_mask), the callback +patch is called. The patch callback should initialize the codec and +set the codec->patch_ops field. This is defined as below: + + struct hda_codec_ops { + int (*build_controls)(struct hda_codec *codec); + int (*build_pcms)(struct hda_codec *codec); + int (*init)(struct hda_codec *codec); + void (*free)(struct hda_codec *codec); + void (*unsol_event)(struct hda_codec *codec, unsigned int res); + #ifdef CONFIG_PM + int (*suspend)(struct hda_codec *codec, pm_message_t state); + int (*resume)(struct hda_codec *codec); + #endif + }; + +The build_controls callback is called from snd_hda_build_controls(). +Similarly, the build_pcms callback is called from +snd_hda_build_pcms(). The init callback is called after +build_controls to initialize the hardware. +The free callback is called as a destructor. + +The unsol_event callback is called when an unsolicited event is +received. + +The suspend and resume callbacks are for power management. + +Each entry can be NULL if not necessary to be called. + + +Generic Parser +============== + +When the device doesn't match with any given presets, the widgets are +parsed via th generic parser (hda_generic.c). Its support is +limited: no multi-channel support, for example. + + +Digital I/O +=========== + +Call snd_hda_create_spdif_out_ctls() from the patch to create controls +related with SPDIF out. In the patch resume callback, call +snd_hda_resume_spdif(). + + +Helper Functions +================ + +snd_hda_get_codec_name() stores the codec name on the given string. + +snd_hda_check_board_config() can be used to obtain the configuration +information matching with the device. Define the table with struct +hda_board_config entries (zero-terminated), and pass it to the +function. The function checks the modelname given as a module +parameter, and PCI subsystem IDs. If the matching entry is found, it +returns the config field value. + +snd_hda_add_new_ctls() can be used to create and add control entries. +Pass the zero-terminated array of snd_kcontrol_new_t. The same array +can be passed to snd_hda_resume_ctls() for resume. +Note that this will call control->put callback of these entries. So, +put callback should check codec->in_resume and force to restore the +given value if it's non-zero even if the value is identical with the +cached value. + +Macros HDA_CODEC_VOLUME(), HDA_CODEC_MUTE() and their variables can be +used for the entry of snd_kcontrol_new_t. + +The input MUX helper callbacks for such a control are provided, too: +snd_hda_input_mux_info() and snd_hda_input_mux_put(). See +patch_realtek.c for example. |