diff options
Diffstat (limited to 'Documentation/sound/oss/AD1816')
| -rw-r--r-- | Documentation/sound/oss/AD1816 | 84 |
1 files changed, 0 insertions, 84 deletions
diff --git a/Documentation/sound/oss/AD1816 b/Documentation/sound/oss/AD1816 deleted file mode 100644 index 14bd8f25d523..000000000000 --- a/Documentation/sound/oss/AD1816 +++ /dev/null @@ -1,84 +0,0 @@ -Documentation for the AD1816(A) sound driver -============================================ - -Installation: -------------- - -To get your AD1816(A) based sound card work, you'll have to enable support for -experimental code ("Prompt for development and/or incomplete code/drivers") -and isapnp ("Plug and Play support", "ISA Plug and Play support"). Enable -"Sound card support", "OSS modules support" and "Support for AD1816(A) based -cards (EXPERIMENTAL)" in the sound configuration menu, too. Now build, install -and reboot the new kernel as usual. - -Features: ---------- - -List of features supported by this driver: -- full-duplex support -- supported audio formats: unsigned 8bit, signed 16bit little endian, - signed 16bit big endian, µ-law, A-law -- supported channels: mono and stereo -- supported recording sources: Master, CD, Line, Line1, Line2, Mic -- supports phat 3d stereo circuit (Line 3) - - -Supported cards: ----------------- - -The following cards are known to work with this driver: -- Terratec Base 1 -- Terratec Base 64 -- HP Kayak -- Acer FX-3D -- SY-1816 -- Highscreen Sound-Boostar 32 Wave 3D -- Highscreen Sound-Boostar 16 -- AVM Apex Pro card -- (Aztech SC-16 3D) -- (Newcom SC-16 3D) -- (Terratec EWS64S) - -Cards listed in brackets are not supported reliable. If you have such a card -you should add the extra parameter: - options=1 -when loading the ad1816 module via modprobe. - - -Troubleshooting: ----------------- - -First of all you should check, if the driver has been loaded -properly. - -If loading of the driver succeeds, but playback/capture fails, check -if you used the correct values for irq, dma and dma2 when loading the module. -If one of them is wrong you usually get the following error message: - -Nov 6 17:06:13 tek01 kernel: Sound: DMA (output) timed out - IRQ/DRQ config error? - -If playback/capture is too fast or to slow, you should have a look at -the clock chip of your sound card. The AD1816 was designed for a 33MHz -oscillator, however most sound card manufacturer use slightly -different oscillators as they are cheaper than 33MHz oscillators. If -you have such a card you have to adjust the ad1816_clockfreq parameter -above. For example: For a card using a 32.875MHz oscillator use -ad1816_clockfreq=32875 instead of ad1816_clockfreq=33000. - - -Updates, bugfixes and bugreports: --------------------------------- - -As the driver is still experimental and under development, you should -watch out for updates. Updates of the driver are available on the -Internet from one of my home pages: - http://www.student.informatik.tu-darmstadt.de/~tek/projects/linux.html -or: - http://www.tu-darmstadt.de/~tek01/projects/linux.html - -Bugreports, bugfixes and related questions should be sent via E-Mail to: - tek@rbg.informatik.tu-darmstadt.de - -Thorsten Knabe <tek@rbg.informatik.tu-darmstadt.de> -Christoph Hellwig <hch@infradead.org> - Last modified: 2000/09/20 |