summaryrefslogtreecommitdiff
path: root/Documentation/sound
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/sound')
-rw-r--r--Documentation/sound/alsa/ALSA-Configuration.txt6
-rw-r--r--Documentation/sound/alsa/HD-Audio-Controls.txt16
-rw-r--r--Documentation/sound/alsa/HD-Audio-Models.txt67
-rw-r--r--Documentation/sound/alsa/HD-Audio.txt55
4 files changed, 79 insertions, 65 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 89757012c7ff..936699e4f04b 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -886,6 +886,12 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
disable)
power_save_controller - Reset HD-audio controller in power-saving mode
(default = on)
+ align_buffer_size - Force rounding of buffer/period sizes to multiples
+ of 128 bytes. This is more efficient in terms of memory
+ access but isn't required by the HDA spec and prevents
+ users from specifying exact period/buffer sizes.
+ (default = on)
+ snoop - Enable/disable snooping (default = on)
This module supports multiple cards and autoprobe.
diff --git a/Documentation/sound/alsa/HD-Audio-Controls.txt b/Documentation/sound/alsa/HD-Audio-Controls.txt
index 1482035243e6..e9621e349e17 100644
--- a/Documentation/sound/alsa/HD-Audio-Controls.txt
+++ b/Documentation/sound/alsa/HD-Audio-Controls.txt
@@ -98,3 +98,19 @@ Conexant codecs
* Auto-Mute Mode
See Reatek codecs.
+
+
+Analog codecs
+--------------
+
+* Channel Mode
+ This is an enum control to change the surround-channel setup,
+ appears only when the surround channels are available.
+ It gives the number of channels to be used, "2ch", "4ch" and "6ch".
+ According to the configuration, this also controls the
+ jack-retasking of multi-I/O jacks.
+
+* Independent HP
+ When this enum control is enabled, the headphone output is routed
+ from an individual stream (the third PCM such as hw:0,2) instead of
+ the primary stream.
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index d70c93bdcadf..4f3443230d89 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -29,9 +29,6 @@ ALC880
ALC260
======
- hp HP machines
- hp-3013 HP machines (3013-variant)
- hp-dc7600 HP DC7600
fujitsu Fujitsu S7020
acer Acer TravelMate
will Will laptops (PB V7900)
@@ -46,15 +43,10 @@ ALC260
ALC262
======
fujitsu Fujitsu Laptop
- hp-bpc HP xw4400/6400/8400/9400 laptops
- hp-bpc-d7000 HP BPC D7000
- hp-tc-t5735 HP Thin Client T5735
- hp-rp5700 HP RP5700
benq Benq ED8
benq-t31 Benq T31
hippo Hippo (ATI) with jack detection, Sony UX-90s
hippo_1 Hippo (Benq) with jack detection
- sony-assamd Sony ASSAMD
toshiba-s06 Toshiba S06
toshiba-rx1 Toshiba RX1
tyan Tyan Thunder n6650W (S2915-E)
@@ -66,43 +58,15 @@ ALC262
ALC267/268
==========
- quanta-il1 Quanta IL1 mini-notebook
- 3stack 3-stack model
- toshiba Toshiba A205
- acer Acer laptops
- acer-dmic Acer laptops with digital-mic
- acer-aspire Acer Aspire One
- dell Dell OEM laptops (Vostro 1200)
- zepto Zepto laptops
- test for testing/debugging purpose, almost all controls can
- adjusted. Appearing only when compiled with
- $CONFIG_SND_DEBUG=y
- auto auto-config reading BIOS (default)
+ N/A
ALC269
======
- basic Basic preset
- quanta Quanta FL1
laptop-amic Laptops with analog-mic input
laptop-dmic Laptops with digital-mic input
- fujitsu FSC Amilo
- lifebook Fujitsu Lifebook S6420
- auto auto-config reading BIOS (default)
ALC662/663/272
==============
- 3stack-dig 3-stack (2-channel) with SPDIF
- 3stack-6ch 3-stack (6-channel)
- 3stack-6ch-dig 3-stack (6-channel) with SPDIF
- 5stack-dig 5-stack with SPDIF
- lenovo-101e Lenovo laptop
- eeepc-p701 ASUS Eeepc P701
- eeepc-ep20 ASUS Eeepc EP20
- ecs ECS/Foxconn mobo
- m51va ASUS M51VA
- g71v ASUS G71V
- h13 ASUS H13
- g50v ASUS G50V
asus-mode1 ASUS
asus-mode2 ASUS
asus-mode3 ASUS
@@ -111,15 +75,10 @@ ALC662/663/272
asus-mode6 ASUS
asus-mode7 ASUS
asus-mode8 ASUS
- dell Dell with ALC272
- dell-zm1 Dell ZM1 with ALC272
- samsung-nc10 Samsung NC10 mini notebook
- auto auto-config reading BIOS (default)
ALC680
======
- base Base model (ASUS NX90)
- auto auto-config reading BIOS (default)
+ N/A
ALC882/883/885/888/889
======================
@@ -175,28 +134,11 @@ ALC882/883/885/888/889
ALC861/660
==========
- 3stack 3-jack
- 3stack-dig 3-jack with SPDIF I/O
- 6stack-dig 6-jack with SPDIF I/O
- 3stack-660 3-jack (for ALC660)
- uniwill-m31 Uniwill M31 laptop
- toshiba Toshiba laptop support
- asus Asus laptop support
- asus-laptop ASUS F2/F3 laptops
- auto auto-config reading BIOS (default)
+ N/A
ALC861VD/660VD
==============
- 3stack 3-jack
- 3stack-dig 3-jack with SPDIF OUT
- 6stack-dig 6-jack with SPDIF OUT
- 3stack-660 3-jack (for ALC660VD)
- 3stack-660-digout 3-jack with SPDIF OUT (for ALC660VD)
- lenovo Lenovo 3000 C200
- dallas Dallas laptops
- hp HP TX1000
- asus-v1s ASUS V1Sn
- auto auto-config reading BIOS (default)
+ N/A
CMI9880
=======
@@ -289,7 +231,6 @@ Conexant 5051
hp-dv6736 HP dv6736
hp-f700 HP Compaq Presario F700
ideapad Lenovo IdeaPad laptop
- lenovo-x200 Lenovo X200 laptop
toshiba Toshiba Satellite M300
Conexant 5066
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index c82beb007634..03e2771ddeef 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -447,7 +447,10 @@ The file needs to have a line `[codec]`. The next line should contain
three numbers indicating the codec vendor-id (0x12345678 in the
example), the codec subsystem-id (0xabcd1234) and the address (2) of
the codec. The rest patch entries are applied to this specified codec
-until another codec entry is given.
+until another codec entry is given. Passing 0 or a negative number to
+the first or the second value will make the check of the corresponding
+field be skipped. It'll be useful for really broken devices that don't
+initialize SSID properly.
The `[model]` line allows to change the model name of the each codec.
In the example above, it will be changed to model=auto.
@@ -491,7 +494,7 @@ Also, the codec chip name can be rewritten via `[chip_name]` line.
The hd-audio driver reads the file via request_firmware(). Thus,
a patch file has to be located on the appropriate firmware path,
typically, /lib/firmware. For example, when you pass the option
-`patch=hda-init.fw`, the file /lib/firmware/hda-init-fw must be
+`patch=hda-init.fw`, the file /lib/firmware/hda-init.fw must be
present.
The patch module option is specific to each card instance, and you
@@ -524,6 +527,54 @@ power-saving. See /sys/module/snd_hda_intel/parameters/power_save to
check the current value. If it's non-zero, the feature is turned on.
+Tracepoints
+~~~~~~~~~~~
+The hd-audio driver gives a few basic tracepoints.
+`hda:hda_send_cmd` traces each CORB write while `hda:hda_get_response`
+traces the response from RIRB (only when read from the codec driver).
+`hda:hda_bus_reset` traces the bus-reset due to fatal error, etc,
+`hda:hda_unsol_event` traces the unsolicited events, and
+`hda:hda_power_down` and `hda:hda_power_up` trace the power down/up
+via power-saving behavior.
+
+Enabling all tracepoints can be done like
+------------------------------------------------------------------------
+ # echo 1 > /sys/kernel/debug/tracing/events/hda/enable
+------------------------------------------------------------------------
+then after some commands, you can traces from
+/sys/kernel/debug/tracing/trace file. For example, when you want to
+trace what codec command is sent, enable the tracepoint like:
+------------------------------------------------------------------------
+ # cat /sys/kernel/debug/tracing/trace
+ # tracer: nop
+ #
+ # TASK-PID CPU# TIMESTAMP FUNCTION
+ # | | | | |
+ <...>-7807 [002] 105147.774889: hda_send_cmd: [0:0] val=e3a019
+ <...>-7807 [002] 105147.774893: hda_send_cmd: [0:0] val=e39019
+ <...>-7807 [002] 105147.999542: hda_send_cmd: [0:0] val=e3a01a
+ <...>-7807 [002] 105147.999543: hda_send_cmd: [0:0] val=e3901a
+ <...>-26764 [001] 349222.837143: hda_send_cmd: [0:0] val=e3a019
+ <...>-26764 [001] 349222.837148: hda_send_cmd: [0:0] val=e39019
+ <...>-26764 [001] 349223.058539: hda_send_cmd: [0:0] val=e3a01a
+ <...>-26764 [001] 349223.058541: hda_send_cmd: [0:0] val=e3901a
+------------------------------------------------------------------------
+Here `[0:0]` indicates the card number and the codec address, and
+`val` shows the value sent to the codec, respectively. The value is
+a packed value, and you can decode it via hda-decode-verb program
+included in hda-emu package below. For example, the value e3a019 is
+to set the left output-amp value to 25.
+------------------------------------------------------------------------
+ % hda-decode-verb 0xe3a019
+ raw value = 0x00e3a019
+ cid = 0, nid = 0x0e, verb = 0x3a0, parm = 0x19
+ raw value: verb = 0x3a0, parm = 0x19
+ verbname = set_amp_gain_mute
+ amp raw val = 0xa019
+ output, left, idx=0, mute=0, val=25
+------------------------------------------------------------------------
+
+
Development Tree
~~~~~~~~~~~~~~~~
The latest development codes for HD-audio are found on sound git tree: