summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/stable/sysfs-devices2
-rw-r--r--Documentation/PCI/MSI-HOWTO.txt24
-rw-r--r--Documentation/PCI/pci.txt1
-rw-r--r--Documentation/arm64/silicon-errata.txt1
-rw-r--r--Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt7
-rw-r--r--Documentation/devicetree/bindings/serial/8250.txt19
-rw-r--r--Documentation/devicetree/bindings/sound/omap-mcpdm.txt10
-rw-r--r--Documentation/devicetree/bindings/thermal/thermal.txt10
-rw-r--r--Documentation/filesystems/overlayfs.txt8
-rw-r--r--Documentation/kernel-parameters.txt4
-rw-r--r--Documentation/networking/dsa/dsa.txt20
-rw-r--r--Documentation/powerpc/transactional_memory.txt2
-rw-r--r--Documentation/rapidio/mport_cdev.txt4
13 files changed, 37 insertions, 75 deletions
diff --git a/Documentation/ABI/stable/sysfs-devices b/Documentation/ABI/stable/sysfs-devices
index 43f78b88da28..df449d79b563 100644
--- a/Documentation/ABI/stable/sysfs-devices
+++ b/Documentation/ABI/stable/sysfs-devices
@@ -1,7 +1,7 @@
# Note: This documents additional properties of any device beyond what
# is documented in Documentation/sysfs-rules.txt
-What: /sys/devices/*/of_path
+What: /sys/devices/*/of_node
Date: February 2015
Contact: Device Tree mailing list <devicetree@vger.kernel.org>
Description:
diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt
index c55df2911136..cd9c9f6a7cd9 100644
--- a/Documentation/PCI/MSI-HOWTO.txt
+++ b/Documentation/PCI/MSI-HOWTO.txt
@@ -94,14 +94,11 @@ has a requirements for a minimum number of vectors the driver can pass a
min_vecs argument set to this limit, and the PCI core will return -ENOSPC
if it can't meet the minimum number of vectors.
-The flags argument should normally be set to 0, but can be used to pass the
-PCI_IRQ_NOMSI and PCI_IRQ_NOMSIX flag in case a device claims to support
-MSI or MSI-X, but the support is broken, or to pass PCI_IRQ_NOLEGACY in
-case the device does not support legacy interrupt lines.
-
-By default this function will spread the interrupts around the available
-CPUs, but this feature can be disabled by passing the PCI_IRQ_NOAFFINITY
-flag.
+The flags argument is used to specify which type of interrupt can be used
+by the device and the driver (PCI_IRQ_LEGACY, PCI_IRQ_MSI, PCI_IRQ_MSIX).
+A convenient short-hand (PCI_IRQ_ALL_TYPES) is also available to ask for
+any possible kind of interrupt. If the PCI_IRQ_AFFINITY flag is set,
+pci_alloc_irq_vectors() will spread the interrupts around the available CPUs.
To get the Linux IRQ numbers passed to request_irq() and free_irq() and the
vectors, use the following function:
@@ -131,7 +128,7 @@ larger than the number supported by the device it will automatically be
capped to the supported limit, so there is no need to query the number of
vectors supported beforehand:
- nvec = pci_alloc_irq_vectors(pdev, 1, nvec, 0);
+ nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_ALL_TYPES)
if (nvec < 0)
goto out_err;
@@ -140,7 +137,7 @@ interrupts it can request a particular number of interrupts by passing that
number to pci_alloc_irq_vectors() function as both 'min_vecs' and
'max_vecs' parameters:
- ret = pci_alloc_irq_vectors(pdev, nvec, nvec, 0);
+ ret = pci_alloc_irq_vectors(pdev, nvec, nvec, PCI_IRQ_ALL_TYPES);
if (ret < 0)
goto out_err;
@@ -148,15 +145,14 @@ The most notorious example of the request type described above is enabling
the single MSI mode for a device. It could be done by passing two 1s as
'min_vecs' and 'max_vecs':
- ret = pci_alloc_irq_vectors(pdev, 1, 1, 0);
+ ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
if (ret < 0)
goto out_err;
Some devices might not support using legacy line interrupts, in which case
-the PCI_IRQ_NOLEGACY flag can be used to fail the request if the platform
-can't provide MSI or MSI-X interrupts:
+the driver can specify that only MSI or MSI-X is acceptable:
- nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_NOLEGACY);
+ nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_MSI | PCI_IRQ_MSIX);
if (nvec < 0)
goto out_err;
diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt
index 123881f62219..77f49dc5be23 100644
--- a/Documentation/PCI/pci.txt
+++ b/Documentation/PCI/pci.txt
@@ -124,7 +124,6 @@ initialization with a pointer to a structure describing the driver
The ID table is an array of struct pci_device_id entries ending with an
all-zero entry. Definitions with static const are generally preferred.
-Use of the deprecated macro DEFINE_PCI_DEVICE_TABLE should be avoided.
Each entry consists of:
diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt
index 4da60b463995..ccc60324e738 100644
--- a/Documentation/arm64/silicon-errata.txt
+++ b/Documentation/arm64/silicon-errata.txt
@@ -53,6 +53,7 @@ stable kernels.
| ARM | Cortex-A57 | #832075 | ARM64_ERRATUM_832075 |
| ARM | Cortex-A57 | #852523 | N/A |
| ARM | Cortex-A57 | #834220 | ARM64_ERRATUM_834220 |
+| ARM | Cortex-A72 | #853709 | N/A |
| ARM | MMU-500 | #841119,#826419 | N/A |
| | | | |
| Cavium | ThunderX ITS | #22375, #24313 | CAVIUM_ERRATUM_22375 |
diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
index bf99e2f24788..205593f56fe7 100644
--- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
@@ -16,6 +16,11 @@ Required properties:
- vref-supply: The regulator supply ADC reference voltage.
- #io-channel-cells: Should be 1, see ../iio-bindings.txt
+Optional properties:
+- resets: Must contain an entry for each entry in reset-names if need support
+ this option. See ../reset/reset.txt for details.
+- reset-names: Must include the name "saradc-apb".
+
Example:
saradc: saradc@2006c000 {
compatible = "rockchip,saradc";
@@ -23,6 +28,8 @@ Example:
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
clock-names = "saradc", "apb_pclk";
+ resets = <&cru SRST_SARADC>;
+ reset-names = "saradc-apb";
#io-channel-cells = <1>;
vref-supply = <&vcc18>;
};
diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt
index f5561ac7e17e..936ab5b87324 100644
--- a/Documentation/devicetree/bindings/serial/8250.txt
+++ b/Documentation/devicetree/bindings/serial/8250.txt
@@ -42,9 +42,6 @@ Optional properties:
- auto-flow-control: one way to enable automatic flow control support. The
driver is allowed to detect support for the capability even without this
property.
-- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
- line respectively. It will use specified GPIO instead of the peripheral
- function pin for the UART feature. If unsure, don't specify this property.
Note:
* fsl,ns16550:
@@ -66,19 +63,3 @@ Example:
interrupts = <10>;
reg-shift = <2>;
};
-
-Example for OMAP UART using GPIO-based modem control signals:
-
- uart4: serial@49042000 {
- compatible = "ti,omap3-uart";
- reg = <0x49042000 0x400>;
- interrupts = <80>;
- ti,hwmods = "uart4";
- clock-frequency = <48000000>;
- cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
- rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
- dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
- dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
diff --git a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt
index 6f6c2f8e908d..0741dff048dd 100644
--- a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt
+++ b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt
@@ -8,8 +8,6 @@ Required properties:
- interrupts: Interrupt number for McPDM
- interrupt-parent: The parent interrupt controller
- ti,hwmods: Name of the hwmod associated to the McPDM
-- clocks: phandle for the pdmclk provider, likely <&twl6040>
-- clock-names: Must be "pdmclk"
Example:
@@ -21,11 +19,3 @@ mcpdm: mcpdm@40132000 {
interrupt-parent = <&gic>;
ti,hwmods = "mcpdm";
};
-
-In board DTS file the pdmclk needs to be added:
-
-&mcpdm {
- clocks = <&twl6040>;
- clock-names = "pdmclk";
- status = "okay";
-};
diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt
index 41b817f7b670..88b6ea1ad290 100644
--- a/Documentation/devicetree/bindings/thermal/thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/thermal.txt
@@ -62,7 +62,7 @@ For more examples of cooling devices, refer to the example sections below.
Required properties:
- #cooling-cells: Used to provide cooling device specific information
Type: unsigned while referring to it. Must be at least 2, in order
- Size: one cell to specify minimum and maximum cooling state used
+ Size: one cell to specify minimum and maximum cooling state used
in the reference. The first cell is the minimum
cooling state requested and the second cell is
the maximum cooling state requested in the reference.
@@ -119,7 +119,7 @@ Required properties:
Optional property:
- contribution: The cooling contribution to the thermal zone of the
Type: unsigned referred cooling device at the referred trip point.
- Size: one cell The contribution is a ratio of the sum
+ Size: one cell The contribution is a ratio of the sum
of all cooling contributions within a thermal zone.
Note: Using the THERMAL_NO_LIMIT (-1UL) constant in the cooling-device phandle
@@ -145,7 +145,7 @@ Required properties:
Size: one cell
- thermal-sensors: A list of thermal sensor phandles and sensor specifier
- Type: list of used while monitoring the thermal zone.
+ Type: list of used while monitoring the thermal zone.
phandles + sensor
specifier
@@ -473,7 +473,7 @@ thermal-zones {
<&adc>; /* pcb north */
/* hotspot = 100 * bandgap - 120 * adc + 484 */
- coefficients = <100 -120 484>;
+ coefficients = <100 -120 484>;
trips {
...
@@ -502,7 +502,7 @@ from the ADC sensor. The binding would be then:
thermal-sensors = <&adc>;
/* hotspot = 1 * adc + 6000 */
- coefficients = <1 6000>;
+ coefficients = <1 6000>;
(d) - Board thermal
diff --git a/Documentation/filesystems/overlayfs.txt b/Documentation/filesystems/overlayfs.txt
index d6259c786316..bcbf9710e4af 100644
--- a/Documentation/filesystems/overlayfs.txt
+++ b/Documentation/filesystems/overlayfs.txt
@@ -183,12 +183,10 @@ The copy_up operation essentially creates a new, identical file and
moves it over to the old name. The new file may be on a different
filesystem, so both st_dev and st_ino of the file may change.
-Any open files referring to this inode will access the old data and
-metadata. Similarly any file locks obtained before copy_up will not
-apply to the copied up file.
+Any open files referring to this inode will access the old data.
-On a file opened with O_RDONLY fchmod(2), fchown(2), futimesat(2) and
-fsetxattr(2) will fail with EROFS.
+Any file locks (and leases) obtained before copy_up will not apply
+to the copied up file.
If a file with multiple hard links is copied up, then this will
"break" the link. Changes will not be propagated to other names
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 46c030a49186..a4f4d693e2c1 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -3032,6 +3032,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
PAGE_SIZE is used as alignment.
PCI-PCI bridge can be specified, if resource
windows need to be expanded.
+ To specify the alignment for several
+ instances of a device, the PCI vendor,
+ device, subvendor, and subdevice may be
+ specified, e.g., 4096@pci:8086:9c22:103c:198f
ecrc= Enable/disable PCIe ECRC (transaction layer
end-to-end CRC checking).
bios: Use BIOS/firmware settings. This is the
diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt
index 9d05ed7f7da5..f20c884c048a 100644
--- a/Documentation/networking/dsa/dsa.txt
+++ b/Documentation/networking/dsa/dsa.txt
@@ -587,26 +587,6 @@ of DSA, would be the its port-based VLAN, used by the associated bridge device.
TODO
====
-The platform device problem
----------------------------
-DSA is currently implemented as a platform device driver which is far from ideal
-as was discussed in this thread:
-
-http://permalink.gmane.org/gmane.linux.network/329848
-
-This basically prevents the device driver model to be properly used and applied,
-and support non-MDIO, non-MMIO Ethernet connected switches.
-
-Another problem with the platform device driver approach is that it prevents the
-use of a modular switch drivers build due to a circular dependency, illustrated
-here:
-
-http://comments.gmane.org/gmane.linux.network/345803
-
-Attempts of reworking this has been done here:
-
-https://lwn.net/Articles/643149/
-
Making SWITCHDEV and DSA converge towards an unified codebase
-------------------------------------------------------------
diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.txt
index ba0a2a4a54ba..e32fdbb4c9a7 100644
--- a/Documentation/powerpc/transactional_memory.txt
+++ b/Documentation/powerpc/transactional_memory.txt
@@ -167,6 +167,8 @@ signal will be rolled back anyway.
For signals taken in non-TM or suspended mode, we use the
normal/non-checkpointed stack pointer.
+Any transaction initiated inside a sighandler and suspended on return
+from the sighandler to the kernel will get reclaimed and discarded.
Failure cause codes used by kernel
==================================
diff --git a/Documentation/rapidio/mport_cdev.txt b/Documentation/rapidio/mport_cdev.txt
index 6e491a662461..a53f786ee2e9 100644
--- a/Documentation/rapidio/mport_cdev.txt
+++ b/Documentation/rapidio/mport_cdev.txt
@@ -80,6 +80,10 @@ functionality of their platform when planning to use this driver:
III. Module parameters
+- 'dma_timeout' - DMA transfer completion timeout (in msec, default value 3000).
+ This parameter set a maximum completion wait time for SYNC mode DMA
+ transfer requests and for RIO_WAIT_FOR_ASYNC ioctl requests.
+
- 'dbg_level' - This parameter allows to control amount of debug information
generated by this device driver. This parameter is formed by set of
bit masks that correspond to the specific functional blocks.