summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-module16
-rw-r--r--Documentation/DocBook/media/constraints.png.b6459
-rw-r--r--Documentation/DocBook/media/dvb/dvbproperty.xml19
-rw-r--r--Documentation/DocBook/media/dvb/frontend.xml8
-rw-r--r--Documentation/DocBook/media/selection.png.b64206
-rw-r--r--Documentation/DocBook/media/v4l/biblio.xml8
-rw-r--r--Documentation/DocBook/media/v4l/common.xml10
-rw-r--r--Documentation/DocBook/media/v4l/compat.xml30
-rw-r--r--Documentation/DocBook/media/v4l/controls.xml43
-rw-r--r--Documentation/DocBook/media/v4l/dev-capture.xml8
-rw-r--r--Documentation/DocBook/media/v4l/dev-codec.xml8
-rw-r--r--Documentation/DocBook/media/v4l/dev-effect.xml8
-rw-r--r--Documentation/DocBook/media/v4l/dev-event.xml8
-rw-r--r--Documentation/DocBook/media/v4l/dev-osd.xml8
-rw-r--r--Documentation/DocBook/media/v4l/dev-output.xml8
-rw-r--r--Documentation/DocBook/media/v4l/dev-overlay.xml8
-rw-r--r--Documentation/DocBook/media/v4l/dev-radio.xml8
-rw-r--r--Documentation/DocBook/media/v4l/dev-raw-vbi.xml8
-rw-r--r--Documentation/DocBook/media/v4l/dev-rds.xml16
-rw-r--r--Documentation/DocBook/media/v4l/dev-sliced-vbi.xml9
-rw-r--r--Documentation/DocBook/media/v4l/dev-teletext.xml8
-rw-r--r--Documentation/DocBook/media/v4l/driver.xml8
-rw-r--r--Documentation/DocBook/media/v4l/func-close.xml8
-rw-r--r--Documentation/DocBook/media/v4l/func-ioctl.xml8
-rw-r--r--Documentation/DocBook/media/v4l/func-mmap.xml8
-rw-r--r--Documentation/DocBook/media/v4l/func-munmap.xml8
-rw-r--r--Documentation/DocBook/media/v4l/func-open.xml8
-rw-r--r--Documentation/DocBook/media/v4l/func-poll.xml8
-rw-r--r--Documentation/DocBook/media/v4l/func-read.xml8
-rw-r--r--Documentation/DocBook/media/v4l/func-select.xml8
-rw-r--r--Documentation/DocBook/media/v4l/func-write.xml8
-rw-r--r--Documentation/DocBook/media/v4l/io.xml8
-rw-r--r--Documentation/DocBook/media/v4l/libv4l.xml7
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-grey.xml8
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-m420.xml8
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-nv12.xml8
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-nv12m.xml8
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-nv12mt.xml8
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-nv16.xml8
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-nv24.xml121
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml15
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-packed-yuv.xml8
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-sbggr16.xml8
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-sbggr8.xml8
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-sgbrg8.xml8
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml8
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-uyvy.xml8
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-vyuy.xml8
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-y16.xml8
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-y41p.xml8
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-yuv410.xml8
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-yuv411p.xml8
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-yuv420.xml8
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml8
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-yuv422p.xml8
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-yuyv.xml8
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-yvyu.xml8
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt.xml14
-rw-r--r--Documentation/DocBook/media/v4l/selection-api.xml321
-rw-r--r--Documentation/DocBook/media/v4l/v4l2.xml1
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml8
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml8
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-enuminput.xml8
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-enumoutput.xml8
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-enumstd.xml8
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-g-ctrl.xml8
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml7
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml14
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-g-frequency.xml8
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-g-modulator.xml8
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-g-priority.xml8
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-g-selection.xml304
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-g-std.xml8
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-g-tuner.xml18
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-querybuf.xml8
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-queryctrl.xml8
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml8
-rw-r--r--Documentation/coccinelle.txt10
-rw-r--r--Documentation/devicetree/bindings/dma/atmel-dma.txt14
-rw-r--r--Documentation/devicetree/bindings/mfd/mc13xxx.txt78
-rw-r--r--Documentation/devicetree/bindings/mfd/twl-familly.txt47
-rw-r--r--Documentation/devicetree/bindings/resource-names.txt54
-rw-r--r--Documentation/dma-buf-sharing.txt4
-rw-r--r--Documentation/dmaengine.txt8
-rwxr-xr-xDocumentation/dvb/get_dvb_firmware42
-rw-r--r--Documentation/fb/api.txt306
-rw-r--r--Documentation/feature-removal-schedule.txt35
-rw-r--r--Documentation/filesystems/ceph.txt18
-rw-r--r--Documentation/filesystems/nfs/00-INDEX2
-rw-r--r--Documentation/filesystems/nfs/fault_injection.txt69
-rw-r--r--Documentation/filesystems/squashfs.txt6
-rw-r--r--Documentation/hwmon/it8713
-rw-r--r--Documentation/hwmon/lm6321
-rw-r--r--Documentation/hwmon/sysfs-interface2
-rw-r--r--Documentation/kbuild/makefiles.txt50
-rw-r--r--Documentation/kernel-parameters.txt8
-rw-r--r--Documentation/kmemleak.txt3
-rw-r--r--Documentation/mmc/mmc-dev-attrs.txt10
-rw-r--r--Documentation/mmc/mmc-dev-parts.txt13
-rw-r--r--Documentation/video4linux/CARDLIST.au08282
-rw-r--r--Documentation/video4linux/CARDLIST.bttv3
-rw-r--r--Documentation/video4linux/CARDLIST.cx238853
-rw-r--r--Documentation/video4linux/CARDLIST.cx882
-rw-r--r--Documentation/video4linux/CARDLIST.em28xx10
-rw-r--r--Documentation/video4linux/CARDLIST.saa71341
-rw-r--r--Documentation/video4linux/CARDLIST.saa71642
-rw-r--r--Documentation/video4linux/gspca.txt2
-rw-r--r--Documentation/video4linux/v4l2-framework.txt11
108 files changed, 1907 insertions, 636 deletions
diff --git a/Documentation/ABI/testing/sysfs-module b/Documentation/ABI/testing/sysfs-module
index 9489ea8e294c..47064c2b1f79 100644
--- a/Documentation/ABI/testing/sysfs-module
+++ b/Documentation/ABI/testing/sysfs-module
@@ -33,3 +33,19 @@ Description: Maximum time allowed for periodic transfers per microframe (μs)
Beware, non-standard modes are usually not thoroughly tested by
hardware designers, and the hardware can malfunction when this
setting differ from default 100.
+
+What: /sys/module/*/{coresize,initsize}
+Date: Jan 2012
+KernelVersion:»·3.3
+Contact: Kay Sievers <kay.sievers@vrfy.org>
+Description: Module size in bytes.
+
+What: /sys/module/*/taint
+Date: Jan 2012
+KernelVersion:»·3.3
+Contact: Kay Sievers <kay.sievers@vrfy.org>
+Description: Module taint flags:
+ P - proprietary module
+ O - out-of-tree module
+ F - force-loaded module
+ C - staging driver module
diff --git a/Documentation/DocBook/media/constraints.png.b64 b/Documentation/DocBook/media/constraints.png.b64
new file mode 100644
index 000000000000..125b4a94962c
--- /dev/null
+++ b/Documentation/DocBook/media/constraints.png.b64
@@ -0,0 +1,59 @@
+iVBORw0KGgoAAAANSUhEUgAAAlQAAAFYCAYAAACVsmLPAAAAAXNSR0IArs4c6QAAAAZiS0dEAP8A
+/wD/oL2nkwAAAAlwSFlzAAAOxAAADsQBlSsOGwAAAAd0SU1FB9sLCBIAKVtZsMAAAAxxSURBVHja
+7d3ZbqvIAkDRLsv//8v0QytXvpYZap7Wko56OAnE2AXbBSbhOI7jHwAAkr1sAgAAQQUAIKgAAAQV
+AICgAgBAUAEACCoAAEEFACCoAAAQVAAAzb2jvyMEWw0AmFvh37xnhgoAQFABAPT1zvruwtNlAADV
+VLxsyQwVAICgAgAQVAAAggoAQFABACCoYEohuFkugKACsmLq178DIKiAyJgSVQCCCigQU6IKQFAB
+BWJKVAEIKqBgKIkqAEEFFAgkUQUgqIACYSSqAAQViKkwxjIAEFSwbUyJKgBBBWJq8GUCIKhgm5gS
+VQCCCsSUqAIQVMBYoSOqAAQVLOk41lwXAIIKhoqqJyFUYhkACCpYMqpiQqjEMgAQVLBUVKWEUIll
+ACCoYImoygmhEssAQFDBElHVexkACCoAAEEFACCoAAAQVAAAggoAQFABAAgqAAAEFQCAoAIAEFQA
+AIIKAABBBQAgqAAABBUAgKACAOA/b5sAGjsO2wBgMWaoAAAEFQCAoAIAEFQAADtzUXohIQQbAYDi
+Dh9kmYIZKgAAQQUAIKgAAAQVAICgAgAgmU/5VeSTGQDE8InxeZmhAgAQVAAAggoAQFABAAgqAAAE
+FQCAoAIAEFQAAHtyY0/o4O7efe4JCzAXM1QAAIIKAEBQAQAIKgAAQQUAgKACABBUAACCCgBAUAEA
+IKgAAAQVAICgAgAQVAAACCoAAEEFACCoAAAEFVBICGMsAwBBBVPHVE4QlVgGAIIKpo6ps/9utQwA
+BBUsEVMpQVRiGQAIKlgqpmKCqMQyABBUsGRMzbouAAQVNHMca64LAEEFy0WVmAIQVCCqxBSAoAL6
+hI+YAhBUIKrEFICgAvqEkJgCEFQgqo4+3wuAoILto0pMAQgqICOQxBSAoAIyQklMAQgqICOYxBSA
+oAIyokpMAQgqICOqxBTAvN42AYwTVQDMyQwVAICgAgAQVAAAggoAQFABAJDMp/y4FIJtwJx8ehJo
+yQwVAICgAgDoyyk/HnMKhdE5RQ30YoYKAEBQAQAIKgAAQQUAIKgAABBUAACCCgBAUAEACCoAAAQV
+AICgAgAQVAAAggoAAEEFACCoAAAEFQCAoAIAQFABAAgqAABBBQAgqAAAEFQAAIIKAEBQAQAIKgAA
+BBUAgKACABBUAACCCgAAQQUAIKgAAAQVAICgAgBAUAEACCoAAEEFACCoAAAQVAAAggoAQFABAAgq
+AACGCKoQPAs2JQAIquwCUAI2JQAIqowCOPtvbEoAEFQRBaAEbEoAEFQFCkAJ2JQAIKgKFIASsClh
+szEKrDGoXkNuiOPwwim4iezYoc9+39iDfQbVq+mGEFOiCjZ7E23swR6D6tV8Q4gpUQWb7PeNPdhn
+UL26bAgxJapgk/2+sQd7DKr3EDE1y96mUPT1fqgh6Ffosbsz9mDdQfXquiEY/rUKlBtLYgoqDJZB
+Dmjlg8qRWlSBMSSmYLOoKhtUjtCiCowdMQUbRtXLswUgpkBU5XkXf9CmPJZ9nQJrft6Gife9XmC/
+t0mHg9tr3FcJYgrmjilgn8Fa55SfI7WYAvtnYKNBW+8+VLGn/zY6wtd4qDY1iCngx+BtdNCre1G6
+W3gPt7MXUwAwW1CJKjEFCzB2wODtH1SiSkyB/TKw+KB9DfnARJWYAvtnYKLB+m7+AJ+UgL2WTQmT
+jz1jEJVf0ASD7jXck2/vY1PCQscwE+6wfkz1CaqrB6wAbEoQVcBkMdUvqH49cAVgU4KoAiaMqb5B
+9bkBFIBNCaIKmDSm+geVArApYaOxZ4zCuoPq5VkDqL//F1Ow9qASVACV9/9iCtYfVIIKoOL+X0zB
+HoNKUAFU2v+LKdhnUAkqgAZvqoG1B5WgAgAQVAAAggoAQFABAAgqAAAEFQCAoAIAEFQAAIIKAABB
+BQAgqAAABBUAgKACAEBQAQAIKgAAQQUAIKgAABBUAACCCgBAUAEACCoAAAQVAICgAgAY3NsmIEYI
+//3zONK/7u/v/nx+zdPl/1rO0++LWd6vZZ59Xe7jSfnZSq3z6jnJ2ValX09PHj9AD2aoiPJ34Lo6
+wJWKiJQD7N2BN/WAzbNtZTsCuzJDRZeD8XHkH3zPZo5CSJudeTKbdrX+lkE7QkzFbq8VHj/AGTNU
+dDkY1ziw1jjY7nAA/wzKqxnIu5gSPICggoTIuDroXh1YRz3ohuCUlcgESOOUH81iZdR1fJ9+zL1Q
+use1Y6nrvLsearR46rHNAQQVw6l14HtyOurJz5USVqs9LynXt8V+ShBAUMHHQfdzFuMsQGqHSW5M
+PQmrVtdsjRCkOwY5gKBiGne3Okg5WJaMqbuw2uX5+P6aX4H8/f922F4AgorlgyD3hp47z3ycPfZf
+p/FSb00BIKjg4kD8/cm4mFNjKfd/OpsJyb2GJ+V+UzEXSK9wAfuvqGr9s7ooHRiV2yYgDCe8xUOp
+gHny2GNjVdwAOzJDRbUYSfnep8srfdCOWV6tr225ztzt3PpxiTRgdGaoAAAEFQBAX075sbS7C6dH
+OJU0w8/ocQEIKjY2w0F71bAQTMBOnPIDABBUAAB9OeXHY36tCAD8ZoYKAEBQAQD05ZQfl3xSCwDu
+maECABBUAACCCgBAUAEACCqgiRDczwtAUAFZMfXr3wEQVEBkTIkqAEEFFIgpUQUgqIACMSWqAAQV
+UDCURBWAoAIKBJKoAhBUQIEwElUAggrEVBhjGQAIKtg2pkQVgKACMTX4MgEQVLBNTIkqAEEFYkpU
+AQgqYKzQEVUAggqWdBxrrgsAQQVDRdWTECqxDAAEFSwZVTEhVGIZAAgqWCqqUkKoxDIAEFSwRFTl
+hFCJZQAgqGCJqOq9DAAEFQCAoAIAEFQAAAgqAABBBQAwibdNAECqcPKLJo8fH1cNN7+U8up7jpOP
+v6as//PvPr+/xPpTlsEazFABUDSmnsRTie/pvX74ZIYKgKz4+J55+fu7EMLPWZmU2auY9YsjejBD
+BUDRmDk7pdZq/Vf/P2bZT7/2OI7/rU/ICSoAiHIVLS2uFyq5Dtc3kcspPwCairmQvHUghhBOT1U+
+eQx/fyfQBBUALBNrtcPmc/l/QYagAoDqYi9ib/2zPZ2l+hVw7Ms1VAAkKXXbgpIXkH9eIF7r8T15
+bEJLUAHA4wD6FQ5PPoVXc/0ll3/3db/+sCen/ABIio7PU3U5YfIdY0++78n6RzPqxfiUYYYKqh94
+rv/AzFGV8nelouLue3JC5e5XzTx57E777SUcsa+4zxeIo8HlOw/vOgBwLBlqA1drGDNUAACCCgBA
+UAEATM2n/CpyQSIA7MEMFQCAoAIAEFQAAIIKAGBnLkovxI3XAGBfZqgAAAQVAEBfTvlBbXf3I3O6
+GGB6ZqgAAAQVAICgAgAQVAAAggoAAEEFACCoAAAEFQCAoAIAQFABAAgqAABBBQAgqAAAEFQAAIIK
+AEBQAQAIKiBFCGMsAwBBBVPHVE4QlVgGAM29bQIoGFOf/30c7ZcBrV/zd6/Rq6/7fs1/fs3T5Z+9
+AckZO2dvaL6XeffGJ/XxpPxspdZ59ZzkbKve278BM1RQOqaeDvbSy4CW/g5WV6/RUhHRcuwYc2W2
+VY3tP/hzY4YKar5bfLIDeLIMM1WsOnaOI/9AeTZzETt2YmbTrtbfMmhH2PfFbq/Syxxk/2iGCmrF
+1Kzrgplez78OpjUOsDu8qfkMyqsZyLvwSdleNZYpqGASLQe3GSpGHgNXB92r1+6or+sQvInptV+a
+eF/nlB/kDv7aO14xxUpahErqOr7Hc+yF9y3Hbul13l27NPJ+aJBTgYIKRo4qMcXK46b2wTVlHb9m
+3VpcXD/i85Kyb4v9lGCvZQoq2CiqxBQzvfY/ZzHOAqR2mOTG1JOwanXN1ghBunucR3INFYw4qMUU
+K/sLsO9rlXKuXSoZU99jcfXxmPpp5LP7f5W+B9Ukz4GggtGiSkxBn5ja/UL0v3D5/nO1jyq1zWos
+szGn/KDGTinnoliY9TV/FzZnr++U+z+dfcIw93qblPtNxVwUvcIF7N/7uZJRlbLMQS5KN0MFtQ4w
+YgrWGberjs+Y21vExmqN/eDAz0M4jsifrtZ5alh5ZyWmAMbaJxfe75qhgl7veMUUwDIEFfSMKjEF
+sAQXpUOrqJrk5nSwpLvT7yOMxxl+Ro9LUMFQUSWmoP348zN6XIIK7FgAWDWo/DZuAAAXpQMACCoA
+gM7iT/m5BgQA4P+YoQIAEFQAAIIKAEBQAQAIKgAABBUAgKACABBUAAB7+hfHbDX87cMFJQAAAABJ
+RU5ErkJggg==
diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml
index 3bc8a61efe30..ffee1fbbc001 100644
--- a/Documentation/DocBook/media/dvb/dvbproperty.xml
+++ b/Documentation/DocBook/media/dvb/dvbproperty.xml
@@ -334,9 +334,10 @@ typedef enum fe_rolloff {
<title>fe_delivery_system type</title>
<para>Possible values: </para>
<programlisting>
+
typedef enum fe_delivery_system {
SYS_UNDEFINED,
- SYS_DVBC_ANNEX_AC,
+ SYS_DVBC_ANNEX_A,
SYS_DVBC_ANNEX_B,
SYS_DVBT,
SYS_DSS,
@@ -353,6 +354,7 @@ typedef enum fe_delivery_system {
SYS_DAB,
SYS_DVBT2,
SYS_TURBO,
+ SYS_DVBC_ANNEX_C,
} fe_delivery_system_t;
</programlisting>
</section>
@@ -647,6 +649,18 @@ typedef enum fe_hierarchy {
many data types via a single multiplex. The API will soon support this
at which point this section will be expanded.</para>
</section>
+ <section id="DTV_ENUM_DELSYS">
+ <title><constant>DTV_ENUM_DELSYS</constant></title>
+ <para>A Multi standard frontend needs to advertise the delivery systems provided.
+ Applications need to enumerate the provided delivery systems, before using
+ any other operation with the frontend. Prior to it's introduction,
+ FE_GET_INFO was used to determine a frontend type. A frontend which
+ provides more than a single delivery system, FE_GET_INFO doesn't help much.
+ Applications which intends to use a multistandard frontend must enumerate
+ the delivery systems associated with it, rather than trying to use
+ FE_GET_INFO. In the case of a legacy frontend, the result is just the same
+ as with FE_GET_INFO, but in a more structured format </para>
+ </section>
</section>
<section id="frontend-property-terrestrial-systems">
<title>Properties used on terrestrial delivery systems</title>
@@ -767,7 +781,8 @@ typedef enum fe_hierarchy {
<title>Properties used on cable delivery systems</title>
<section id="dvbc-params">
<title>DVB-C delivery system</title>
- <para>The DVB-C Annex-A/C is the widely used cable standard. Transmission uses QAM modulation.</para>
+ <para>The DVB-C Annex-A is the widely used cable standard. Transmission uses QAM modulation.</para>
+ <para>The DVB-C Annex-C is optimized for 6MHz, and is used in Japan. It supports a subset of the Annex A modulation types, and a roll-off of 0.13, instead of 0.15</para>
<para>The following parameters are valid for DVB-C Annex A/C:</para>
<itemizedlist mark='opencircle'>
<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
diff --git a/Documentation/DocBook/media/dvb/frontend.xml b/Documentation/DocBook/media/dvb/frontend.xml
index 61407eaba020..aeaed59d0f1f 100644
--- a/Documentation/DocBook/media/dvb/frontend.xml
+++ b/Documentation/DocBook/media/dvb/frontend.xml
@@ -45,8 +45,8 @@ transmission. The fontend types are given by fe_type_t type, defined as:</para>
</row>
<row>
<entry id="FE_QAM"><constant>FE_QAM</constant></entry>
- <entry>For DVB-C annex A/C standard</entry>
- <entry><constant>SYS_DVBC_ANNEX_AC</constant></entry>
+ <entry>For DVB-C annex A standard</entry>
+ <entry><constant>SYS_DVBC_ANNEX_A</constant></entry>
</row>
<row>
<entry id="FE_OFDM"><constant>FE_OFDM</constant></entry>
@@ -63,6 +63,10 @@ transmission. The fontend types are given by fe_type_t type, defined as:</para>
<para>Newer formats like DVB-S2, ISDB-T, ISDB-S and DVB-T2 are not described at the above, as they're
supported via the new <link linkend="FE_GET_SET_PROPERTY">FE_GET_PROPERTY/FE_GET_SET_PROPERTY</link> ioctl's, using the <link linkend="DTV-DELIVERY-SYSTEM">DTV_DELIVERY_SYSTEM</link> parameter.
</para>
+
+<para>The usage of this field is deprecated, as it doesn't report all supported standards, and
+will provide an incomplete information for frontends that support multiple delivery systems.
+Please use <link linkend="DTV_ENUM_DELSYS">DTV_ENUM_DELSYS</link> instead.</para>
</section>
<section id="fe-caps-t">
diff --git a/Documentation/DocBook/media/selection.png.b64 b/Documentation/DocBook/media/selection.png.b64
new file mode 100644
index 000000000000..416186558cb2
--- /dev/null
+++ b/Documentation/DocBook/media/selection.png.b64
@@ -0,0 +1,206 @@
+iVBORw0KGgoAAAANSUhEUgAABIsAAAHpCAYAAAACi7yYAAAAAXNSR0IArs4c6QAAAAZiS0dEAP8A
+/wD/oL2nkwAAAAlwSFlzAAAOxAAADsQBlSsOGwAAAAd0SU1FB9sLCBAiCLMGMtAAACAASURBVHja
+7d3rkds4FgZQaMohTBY7ObRCV+fgyWJy4P6wJavVIgmSAIjHOVWu3bElPkBSAj5dgpdpmqYAAAAA
+ACGEvzQBAAAAAHfCIgAAAAAehEUAAAAAPAiLAAAAAHgQFgEAAADwICwCAAAA4EFYBAAAAMDDD00A
+21wul9XXTNN0aHnP749Z39o2rK0jRzssLX/pvVve9+61S69Jdey2bn/sMTx6TAAA/cIW+oVb+2tb
+3p+izwioLIJsHYe9X+a979vae89ut6Pb1+txBwD0C3vZN0ERrFNZBAct/ZJxuVx2Vdg8v+/oLyEx
+69j7xbq2/1u2e0u75Th2Mevf8ytVzDkDAOgXjtYv3LquVP0nQRHEUVkEBTsJve/r0hfu2hdz7e0W
+27HQ4QAA9Avr7BcJiiCesAhO+GKK/YIt8SV+RscoNmippUPl1jIAQL/w3PUc7Y8JimAbYRGc9KVY
+Yu6b3OsYNUTRuQAA9AvL9AtT9LsERbCdOYsAX74ZOiVbO1M6LQCAfmH7/TzohcoiqOhLK+eXV4p1
+xP4y1krF0X1bn7dXBwIA0C+ss19oagAoR1gEJ4j9osv5iPq965imKUk59eidwNc/AIB+oX7h/HpK
+tzeMzm1oQJIv7Ra/eO/7sOWxtgAAtN0v1N+DdcIiyPQFlPP1JbZpTyehl19q1joQOhgAgH7hOf3C
+Pct9tz36c7DMbWhQwPMXUYkOQ6517P3Sj/216axJEdfWoyMBAOgXpukX5uqv7Xm/W9JgnsoiSGxr
+4FHiiyvlOu7v21pu/PqLzuuvOTHtlmIZW/bz+f1r6177ewBAv1C/8FwqjCCesAgSdwK2dAh63e+5
+fX8XuBxtt1SdkZhy6djt37vNOioAoF84Sr8wV39tzzIERvCd29Agg7knQ8T+unTk15mc64j5El17
+KsbRW75inrqR6glj79rELWsAgH5hmn7hmcckpt8HI7tMRjYAAAAA/KayCAAAAIAHYREAAAAAD8Ii
+AAAAAB6ERQAAAAA8CIsAAAAAeBAWAQAAAPAgLAIAAADgQVgEAAAAwIOwCAAAAIAHYREAAAAADz80
+AQAAqVwuF40AABWbpmn1NbvDIh0BAKDGzg3n0T8EgD7sCot0BAAAmDNNUwj6iwBQlS3fzIduQ7vd
+blobAMjuer1qhKZ6o4IiAGiZOYsAAMji0w+LAHC6jx0/unkaGgAAAAAPwiIAAAAAHoRFAAAAADwI
+iwAAAAB4EBYBAAAA8OBpaAAAFDf3ZJa5J6htef3za5eeyDb3urWnxsQuM/V7jmxX7Dr3HIMUbfj6
++qXjurZ977Zja1vuaVOAnqgsAgCgqKWB+rt/2/r6s7Z/z3aesf0x+1fjdgFQjsoiALpyfRng3J5+
+Fb7/2+3NL8Xv/m1pWa/veX7t/XXXN4OtuWXs+fe59c/t45H2erd/Mdu/9XX0b63q5zWkWHr9/d8+
+rtfFapOY9byz9L7X5e7ZzqVKmT2VP3ts2cc966+1MmfuGKkkAvhFZREA3XgON94FNnMhzlJQNLes
+1/ffX/f62ue/fw1d3r3m9d/nlhu7/rX22rv8LW20d/voT8ztYbEBzNJrS4YMubbzzNCidLs+BzX3
+datsAjiXsAiALrwLfPYGE1uXtaVK5l2YNLes2OXurdI5svwtbaSKiFdbg5Cl18f821y1UupAZu92
+1njblwobgLG5DQ0AZqSofjkSnOSuvsmxf2fsB5SUMtT5vN2+LC82xNoziXaJNthyO11MBdHS7YUA
+5CUsAmAo91u97rdGLc1jdKQi5t08QiH8uSVrTcwcSkekWv7avuTeD1hzD2TuwcOWqqIS8wa9C01G
+nD/neV9fQzQAyhMWAUAma5NVA23KEeLMhUZHJ5g+e/9jXyscAqiLOYsA6MK7+XLW5gWK/fdnsYHP
+2uvWJtveu969ti5/bxsJzNgTDOx5JP2z1yAmNsC4T7j8+ifXdj6vs7VjlGsdQiSAc6gsAqAbz7eY
+Pf9dqmVtWd7cbWivE0LPbe/rv80tL1Vb7Vl+TBvl3g/a8nx70dIj7e9/v/b6mKer1bBfc9tZ65w8
+pdt1bh1zQdFaGwNw3GWapmnzmy6XQx1wAIAt7gHTjm4LJTuWv/uI084QYC482Pv6LfMSvXtc/Nag
+pNR+xb7+yLYeXX9MG669ZunYpN7mEeeJAsZx/4y7/P7vmP6U29AAAChq6yPm9z6S3n7t34/c648J
+Z97N49TKuQDQOpVFAED1VBY10rGMrCwCAMpRWQQAAADAIcIiAAAAAB48DQ0AADqSciJsAMYkLAIA
+gI4IgwA4SlgEAADAZh9/X9/+/ed/t8Ovf37t3PKWXje3rq3LTP2eI9sVs961969t59r2LbX16zJi
+t+Xzv1vyduE4YVHpD9SZsuDnX4COlA7HLD/Ferase2lZW7Zh6/a+vn6pDda27912rK0vVbsCAEB1
+45qFwf3H39dNIcm715fY/rWQKsV7Wj5me93Dn6VlxgZKnEdYVPLiXAgTPq7X6BBh7rWpln/kPWv7
+LigBAIDGxzUrVT+vocTS6+//thYs7A1plt73utw927kUeixt3xnhWEybzO13qe0VHtVDWFTq4nwK
+cmKDni2B0NLy7/82F/4srWdPYLRneVvWUWvgNNfuAjIAALoZ10TcHhYbwNz/LiYwStpvf3PbU47t
+zL0v727/WqvqijlmEEIIf2mCAh+oK0HR0UBhbflbbuVKsT1ry4vdhhRt/nm7PdZdYr0AADCCreHC
+0utj/m0u3EkdcuzdzntQ09MxS7Gud23iFrQ2qCwqeXFmrjBZWv7n7XZ6WFLDNgAAAGNLGeq8Vilt
+ndz53fKO7sMZc0DlPjaCpfKERTVfKBsmqy617hr2de21qeduAgAAzvM6YfKWypQS8wa9q6IpVT3z
+vPyYp4pBLGERu55i1sSXytO2q2oCAAAe44MMIc5caDQ3B1KSsVzF4dC7p6KthWgqiOohLKr5A2zj
+RNW511/LurY8NQ4AAEhv661OMY9RXxwDPAUP9/+OGjtsDB+ObufzOnMFOTHLnZvoWhhDLBNcl/xA
+PRherIUka7dfLS333Z/a9j/VOoRIAACwc0wy86SzL/3tmadvLU12/Pra2vZryz6V3OZ3f44eMwhB
+ZVGZi/jpFqi5qqAj1UJry495Gltupbdhbh1zQdFauwEAAL/72i+PkU/x+hoeRb93O/fMi1R6Iuet
+xyz1emNDQRNc10NYVOoieQl0jnoNN2KWXyoo2jMH0lnbfKTdzm5nAAA4bXyzMJnyXHVLC0FA7fsV
+cxveu7mCWjoG1EFYVPKDZ2GS5diAYW0ZtQYYJZ/gtrSuexs9h201txsAAFQ7vtkYMGx5/dHXHgk/
+atmvI+9PNYF0ioqvGqrG2O4yTdO0+U2XSwghhJuBNABQwPV3qL+j20LJjuXvPuL9KPnRBWCbtVvE
+hCrsOq9+96Muv/87pj+lsggAAKDFAeBLsCBIaJ9jSC2ERQAAAB0QHgGpCIuI++JZmZRbmTkAAFTW
+h98QHn1cPzQYFPR5+6x6+4RFRJ7IN40AAAA19dGfwp+Yx6HHPr4cQFgEAADQuNfwZy08inkEOzAu
+YREAAECjYiqKdvl50bg04Ujg+Xr7Ze5bw1q63VNYlPzgXzUCAP13zNyeDJB/bJErCAKKB0WtERYB
+AACcNWA9IRBy6xnDX3eColXCoowUbgLQk0kTAMQPRguFQItPOHuzDXuCoss/jieV9Ul+Hrg2TwqK
+WnvioLAIAABgy6CvgiBoz/apKGL4a1dQFE1YBAAA8DywK3hrWOoAJ1U1EXR3XQuKNhEWAQAAYwwW
+Gw6B9u6foAgERXsIiwAAgLYHgoUnia4tgBESwcL1UUlQ9Hn7bCo8EhYBAAB1DvJOenR860GLoAh+
+f4ZUFBS1RlgEAACUH8R5ZLx9hJyfMYKiQ4RFAABAuoGSEMj+w9mfQ4Kiw4RFAADA+iBICAS08Fkl
+KEpCWAQAACMPrMwLBPTyeSYoSkZYBAAAPQ6ahEDASJ95gqKkhEUAANDaoMgtYQB/PhMFRckJiwAA
+oJYBjxAIYNvnpqAoC2ERAADkHlQIgQDyf+4JipIRFgEAwN4Bg3mBAKogKEpLWAQAAK+DASEQQDME
+RekJiwAAGIpbwgD6ISjKQ1gEAEAXhEAAZPl+GSwoCkFYBABA7Z10IRAAZ30HDRgUhSAsAgDgrA64
+eYEAqPl7atCgKARhEQAAR/17CSGEMP186WSHa9HNEAIB70zTNMy+Xi4XBzyRkYOiEIRFAAAs+ff8
+gYcQCICSRg+KQhAWAQCMSQgE0J25KioVR/EERb8IiwAAenJGCPS/6ctgZHp0sG+OB0AFXkMk4dF7
+gqI/hEUAAC04qxLof5O2B6B7gqKvhEUAAGcSAgFQ2HOlkSojQdE7wiIAgFxOvCUMAFgnKHpPWAQA
+sJUQCIBOjFxlJCiaJywCALgTAgHAEARFy4RFAED/zAsEAKvuVUa9VxgJitYJi6DmD+uf7//+8s/6
+a969ds/yU6xn636uLWttu9e2dakdX5cRuy2Xf/K2ETBDCAQAbHBWUPS63toJi6BSS8HD9DM+eJh7
+barlH3nPme2y5h7+LC0zNlACdnaq/r5+v/Zzh0NCIADotsJIUBRPWAQ1fjg/BSKxQc+WQGhp+fd/
+mwtJltaTOzCKbZe5fSoV6giPYKXD9BQCFSMEAoCx+x+Cok2ERVCZtUBk6e9TLP/5dqrY8CfmFqy1
+7Xm+/evdenO3C5CgMyQEAoC+xibT1EV1kaBoO2ERVCp38LG0/CPhT+vt8q4dlsIrARVDdBTffB58
+hGv29X7+d3v8/+v1+ui0AgDEqiUo+rx9NhUeCYug48FcCOfPI7T3faXmQOrtWECJa/eo5xAIAKi8
+v9Dw/EU1BUWtERYByQaXe8OQ5/fVXNUEvVyruQiBAIBaCIqOERZBJ7ZOVJ17/bUParfs1+utaGu3
+oKkgIqczrpfHuf+l43NzMABgpD5IQ/MXCYqOExZBxQPCI6HDWoVOzCPhlwaNJQa8c3MFCWPo9Zov
+zbUEAPRGUJSGsAgqE/M0siOBydryY546VmKw+jpwzt0ukMtZlXOuBQAgeb+m8uoiQVE6wiKo0Gsw
+kmKwOjcvUEuTMadul63rjQ3STHA9SGdJCAQAUA1BUVrCIqjU0m1ksYPFtWWcFWrEPHZ+7rH1Z243
+43BLGADATD+pwuoiQVF6wiKoWMzgce01a4HMGQPZLWFXim3J3Y4G+w11boRAAABdERTlISwCoHlC
+IACAgn2v6dczUmurMBIUpSMsAqDejoh5gQAAiCAoSktYBBQf4BuIIwQCACAVQVF6wiLAgJyk3BIG
+AEApgqI8hEUARBECAQDwpX9Y4ZPRchgtKApBWATgS14IBAAAb40YFIUgLALolnmBAADI3ufsuLpo
+1KAoBGERQHtfyEIgAADIauSgKARhEUBV3BIGAEBzfdjOqotGD4pCEBYBlPkCFQIBAED1BEW/CIsA
+DhACAQCMpbYKmmmaqtmO1quLBEV/CIsA3n3ZmRcIAACGISj6SlgEDEUIBABAT16reWqpNGqJoOg7
+YRHQDbeEAQAAWwiK3hMWAdUTAgEAQGQ/9qnSqHSVUWvzFgmK5gmLgNMIgQAAgDMIipYJi4DkzAsE
+AADnu1f5mMfoK0HROmEREE0IBAAAtOysoOh1vbUTFgEhBLeEAQBAr0pWGNU8b5GgKJ6wCDonBAIA
+AEYnKNpGWASNEgIBAACb+vODzmEkKNpOWASVMS8QAABAGrUERZ+3z6bCI2ERFCIEAgAAanC5XLJW
+F9Uyb1FNQVFrhEWQ+oOxUCgkBAIAAHaPJzIHRmcTFB0jLILaPrSFQAAAALsJio4TFkEhQiAAAKCq
+MUqH1UWCojSERZD6A1coBAAAUJygKJ2/nE4AAABASqUrlgRFaaksghQfhD+1Af1QHQcAQEsERemp
+LAIAAIBB1fCI+yMERXkIiwAAAIDmCYrScRsaJOYWHlrkVkoAgIHHMB08FU1QlJbKIgAAAKBZgqL0
+hEUAAABAkwRFeQiLAAAAAGaMFhSFICwCAAAAeGvEoCgEYREAAADAN6MGRSEIiwAAAGB4l8sl+TJb
+fsLayEFRCCH8cEkAQJkOTo5OGAAAaY0eFIUgLAJgcCV/8VpalyAJAOB8gqJfhEUADKPmUuh32yZA
+AgAoR1D0h7CIrgduBlp9DqqdM4xyHj9vv3MTACAfQdFXwiKAmcH5K4P19o9hT/vlfAQASENQ9J2w
+iO4HjQZUGKyPeXxG2V/nIQCQyuVyGa5PJSh6T1iEgR0kOIcN2H2OOA8BANoiKJonLAIwYG+6vfne
+Ls5BAIBlgqJlf2kCeh/oGVRyxvntvNO22gkAoE6ConUqiwAyDthDUOWRsi1xDgIAHHFWUPS63tqp
+LAIoMGAXdhxrP5yDAABHCYriCYsYYuBnkIQBu/ZCmwIA4xIUbSMsAjhhwI42Ort9tTEAMApB0XbC
+IoYZABoY4Vpoo120jfMQACCVWoKi1ibRFhYBGKhrD+0OANAdQdF+wiKAkwfqBusCCwAA0hIUHSMs
+YqjBoAEp1Pe54LoEACAlQdFxP5xGAOebpilcLpfh9rkVKY6NUAwAID9BURrCIoBKjBQY1Rqc5Gz/
+uWULkQAA0hAUpSMsYriB4YgVHLR1rfR+ftb0eVBDW79ug/AIAGA7QVFawiJgqIH5O7UNznsOjGpo
+69rb9nn7BEcAAOsERekJixhuIN77YJxjg3OD9D4/C1q93gVHAADLBEV5CIsAKhyk9xZonhV09NSG
+giMAgGWConSERQCRg3QD9PaOmXMSAGAMgqJkHc0Qpin85ZQip5oHMgZZ7BmglwwhejlHS+/HSLeY
+lj4nAQBqJChK2nkPIQRhEW0NisAAvbXvmslxse8AgDFcNoKiPIRFGMhCxV9+LZ+jpYMitAMAQA6j
+BUUhCItoZKB4HwAZCGFwPt71v9b+joE2AQDa6sO1ZMSgKARhEUCSwTnaXfsAAPRl1KAoBGERmbSU
+SEvPcY62t72CkPh20lYAANuNHBSFICyikcGOQSKtnaejEhQ5PwEAWjd6UBSCsAjAgFwbD9N22g8A
+YJmg6BdhEcnlmNi6pW0G134egg7tCACQk6DoD2ERBjuAa157AgAMTVD0lbCIpFqu0FFdRM2D8NrP
+z5zbJ9jQrgBAe/25lvoagqLvhEU0O5Ax0IE+OxbU8zkLANA7QdF7wiIAqiXM0MYAALkIiuYJi0im
+xYmtc+4DBt+ue+0IAECdBEXLhEUYlAMAAAxstB/NBUXrhEUAVNepEAQDAJDDWUHR63prJyyiukHj
+1kFi6kGlW9HgXIIiAAD9uRwERfGERQAAAEDXBEXbCIs4rMdKHNVFcM41oqoIAMDYJzVB0XbCIqqy
+d6BogAkAAMCrWoKi1ibRFhYBsImqIgAA/boW+nSCov2ERVTz4VLbQNGtaAAAAG0SFB0jLKIbqhLA
+9QsAQJyefxwXFB0nLIJBP0BpSy1himsCAICaCYrSEBZRxaAx1UBYdQK9XRsAANBKf/Xs8ZigKB1h
+EQCnEvICAHCUoCgtYRG79Dyxdc59Bdc9AABn9ud67NMJitITFtEdVQoAAABjEBTl8cOpBZBOjl9q
+eg5AhbsAAG32UWvs1wmK0lFZxKkfNLk+UFIv1+03AAAA9RIUpaWyCCCRnkNFgSkAgD7cnLOrigRF
+6akswoDRvlMxt2kBAMA8QVEeKovodhB8uVwEPBTjXKvvMwAAQL9Uny6F0YKiEFQWAVT7hSxMAQCA
+c40YFIWgsoiTBsSlBsGpq4umaTKAJ9t1AQAALfVHex8bjRoUhaCyCKDKL+aavngFYgAAjGbkoCgE
+lUUAmwlPjlOhBwDoC+rP1Wr0oCgElUWc8IFY+kMl9fp8OYx9HZQ4/oIUAAA4h6DoF5VFACtKBoSC
+IgAAatdrn1VQ9IewiKID5V4+VEx07bz3pQsAAP0QFH0lLGIIqZ+KRl9qODcERQAAtDK26o2g6Dth
+EVCMwG6cL1wAAGiBoOg9E1xTbHB/9oDYRNfUSFAEAEAr/dbe+q6ConnCIoATv3BrJxQFAKBHgqJl
+bkMDKGz0aiLVVAAA+m5nEhStU1nErB6fguZWNM4+/wQlAABwnrOCotf11k5lEUBmAiIAAPRjzyco
+iqeyiLd6rCrKtT2qi5g7z1QSAQBAHQRF26gsAjhIIAQAgL5tvQRF26ksAjhomqYvfwAAgDrUEhS1
+Nom2yiLeDnxTqTWVvlwuBvUUuYZUHQEAUKve+6qCov2ERQAZCY4AAGihr9pbf1VQdIzb0Fj8sDjC
+wBi+X18q2gAAIC9B0XHCIoYlzOIsQiMAAGrup7bcVxUUpSEsAjjxyxgAAEhDUJSOsIgsA9dWqnZU
+F1HDdSc0AgBAP/UYQVFawiKASr6MAQCA7QRF6QmLACohMAIAoMY+as39VEFRHj+c+qQepLZ2a9fl
+ckm6/9M0ub2t4XPj7C9C5w8AAOwjKEpHWATw5F1QUzpAEhgBAFCbe5+41n6qoCgtt6ExdFVRru12
+O1FfLpfL40+L1yUAAPRMUJSesAhgg5LBkcAIAIDa1NZHFRTlISwC2KlEaCQwAgCAc40WFIUgLBqe
+W9Dybb9B/jgERgAAjDaOHKWPOmJQFIKwCCCJ0nMaAQAAeY0aFIUgLCLhQBnIdy2oLgIAoDY991FH
+DopCEBa5sMk60NfGzqPWz6cc++K6AACgZqMHRSEIiwCyUG0HAMAIevshUFD0i7DIBW1QnHl/VFHg
+fAIAgPoJiv744XQAyONyuQh3AIDmTdOkavqlj1fzsXKO7CMo+kplEUBjnQkBFAAApCMo+k5YNCC3
+oJXfL4N7AACgxDjm+U+r48ySBEXvCYsACnxp+zIGAIC6CIrmCYsGo6rovP0zuAfXAwD47qb0mKZk
+lVFL54mgaJkJrvGFAax2MlzvAAD0QlC0TmURQAGeIAIAwNn90RJVRrX/yHhWUPS63toJiwaiMsAx
+wPkEAACjEhTFExYBcAphFwDAOXJXGNXYzxMUbSMsAgAAALolKNpOWDQIv+A7Fpyv5XmLzLkEAOjH
+6p+2eL7UEhS1Nom2sAgAAADojqBoP2HRAPwC4JjgXLL9AAC8U+IJaWcQFB0jLAIAAAC6ISg6TlgE
+QBTzFgEA6OttcUYVuaAoDWFR59zi4diAawEAgBEIitIRFgEAABDFjzx9a7m6SFCUlrAIgFM7EAAA
+cISgKD1hUcek/o4RuBYAANiitR8HBUV5CIsAAACA5gmK0hEWdcqv9I4V5JLr1ybXAgDov+Kc2UtQ
+lJawCAAAAGiWoCi9H04rYpjU9iu/puAz4ZLlOpimyecNAECnfb0cBEV5qCzqkCDDMcNxBgAA0hgt
+KApBWEQEv/IDJQnVAACMA2sxYlAUgrDIIItqPjgdO1wHrgcAMO6AeowaFIUgLAJoml98AAAgvZGD
+ohCERRiIahuK6PXXN9VFAAD01rcbPSgKQVjk4sMxBNeENgYAIIQgKLoTFjFL5Qzgs6JvgiIAfI/A
+H4KiP4RFYJCMjpT2064AAEMTFH0lLNLpx7GkUTWFlbm3xXWhPQEAchEUfScsovpBKBiU+9wYrS21
+IwBAGYKi94RFOv5UOEB2TF2baNMcbaf9AICzxzo1ERTNExYB+OJuarsEHtoMAOAoQdEyYRHNDELB
+4NxniPbVVgD4nsH5cpSgaJ2wyMWGY4tjp507bR9tBADw1VlB0et6aycsAkg8QM+theq/UtsoENEm
+AACxBEXxhEU0NwgFA3SfJ+/aH+0AADBHULSNsMigAMeYho5Ta4Fu6cBo1GtGWAkAME9QtJ2wiGYH
+oWCA7rNl7rg4BwEACKGeoKi1SbSFRQ0PEHCsOW9wfsZxEehuP072DwD0Vxm3Dyoo2u+HUx+g/g5Q
+60HR5XI5pR3v6+whaNMRBwCIJyg6RlhENwMpMCCv/3PmrPZ9Xm9rn3fOSQCAbQRFxwmLDGZpYEA8
+TZPKiMHPKddHnvOwxrZ1nQAA7CcoSkNYBFCxHqv+agiM7l6344z2Fg4B0INeftyk7XNFUJSOsAgf
+6uDaPGXfagxJ5rYpxbEQCgEA5CMoSktY1BiDjXEHwn6tGe8ccp347AUAYJ2gKL2/nFYGpIDr8sx9
+9TkEAMBegqI8hEUN8cu2Ab9zwHljv9H2AADvCYrSERYBGLTbf20OANA0QVFa5iwySABci1W1hQo6
+5xwAwBaCovRUFjXC4MmAzLngHBmpTbSLcw4AIIagKA+VRQAG7FW3kYDUOQcAcKbRgqIQVBY1IcdA
+yaDBOcF5A3bXn88r5xwAQBtGDIpCUFkERQZqwh0M1tO0n2vJOQcAUMqoQVEIwiIAA/YG21No5JwD
+AMhp5KAoBLehVc8taAZvJc8N0h1vt/6UaWO0CQB9j13gDKMHRSGoLAJINlDn3HYfsYPqvAMASEtQ
+9IuwyMACcB11dVxGCI2cgwAA6QmK/hAWVUwZZ3+Du9THdJomg0aDcRaOXS+fo85HAIC8BEVfCYsM
+DnBMnX8Mc821FB65BgFokR8zaZGg6DthEaT+gvypDaBW7zqvNQRIOtUAAOcQFL0nLAJgaEtBTcog
+SSAEAFAXQdE8YREAzBDwAAD0SVC0TFgEKQaU//z637lb0O7/DgAAwLkEReuERVBAzDxGAiUAAIC8
+zgqKXtdbO2ERVGItUBImAQDQRL/WE9G6O569EBTFExZBQnOBToonpKlOAgAA2EdQtI2wCAqICXEE
+SgAAAOkJirYTFkEl1kKcFGFS7HIESgAAHOpzuhWNStQSFH3ePpsKj4RF0IhS1UkxyxEmAQAAtasp
+KGqNsAg64nY3AACg6jFLoYozQdExwiIY7cPZ7W4AAEDHBEXHCYuAL2q63S12ewAAgPSmaWpumwVF
+aQiLgM3MnwQAANRGUJSOsAjIwvxJAABj80Q0ShIUpSUsAk5j/iQA8i3Z/QAADThJREFUAOAoQVF6
+wiKgWm53AwAAlgiK8hAWAU1zuxsAABCCoCglYRHQPYESAAD0TVCUlrAIIJg/CQAAWiUoSk9YBBDB
+/EkAADv6NZ6IxnM/NsO5ICjKQ1gEkOrLz+1uAADQndGCohCERQBFCZQAAGjBNE0aIYwZFIUgLAKo
+jvmTAADgfKMGRSEIiwCaY/4kAKAl5i1q85iNbuSgKARhEUCX3O4GAAD7jB4UhSAsAhiW290AACjW
+92ykukxQ9IuwCID3X+gV3e4Wuz0AALCXoOgPYREAu5k/CQCgL6POVyQo+kpYBEBW5k8CAKBmgqLv
+hEUAnM78SQDQN09Ea+c4jUZQ9J6wCIDqmT8JAIDUBEXzhEUAdMH8SQAAB/o3g1UVCYqWCYsAGIb5
+kwAAEBStExYBwBPzJwEAI1FR9HnKemsnLAKADdzuBgDQJkFRPGERACTmdjcAePO95YloVR6TIn2j
+Co67oGgbYREAnECgBABQhqBoO2ERAFTK/EkAQA4jzVNUS1D0eftsKjwSFgFAo86cP+kjXL92gP67
+OSAAQFVqCopaIywCgI6VCpQ+/r6uvkagBIB5i85t+1P6Iicdb0HRMcIiABhcqdvdBEoAQAmCouOE
+RQDAonuYNH3p/Ny+do4igqCoTtbMch6B1b+XEP43OSgAEOHsuYnOqCoSFKUhLAIADoupCEoVKIV/
+VzqewiQAGJKgKB1hEQBQRLFA6d+IXzEFSgB0aKSnnH3rQwiKkhIWAQDVmAuUrtfrr05wovmTBEoA
+0A9BUXrCIgCgHTEBzr+J5kcQKAGEEH7NO5OyYqX1J6KNXL2z9bwpQVCUh7AIAOhLTYGSMAkAihEU
+pSMsAgDGUypQUp0EwIDOqBwTFKUlLAIAeGctxHG7GwBUQVCUnrAIAGAPt7sBwDelq4oERXkIiwAA
+cnG7G9BRAGCSa2LOkx6NFhSFICwCADiXQAkAqjViUBSCsAgAoH7mTwKgcj1WFY0aFIUgLAIAaF8l
+8ydNP0O4/ONwANC+kYOiEIRFAABjKBQoTT+fOtrhGvWez/9ujg80wLxFLJ0bPRk9KApBWAQAwF2p
+291eO+V/X1dfI1ACoARB0S/CIgAA4qyESZfL5UtlUdLOu0AJoEo9VRUJiv4QFgEAkG7Q8E8I06OT
+fYvrnEcEQSmWI0wCYPY7RFD0hbAIAIBTxYQ4KQIl1UkA6ago6puwCACA6q2FOKWqk2K2BYB2CIre
+ExYBANC8UtVJscsRKNErT0Tjfh70QFA0T1gEAMAQagqUhEkA5xIULRMWAQDAfbBg/iSAWSqKxiEs
+AgCADcyfBNCus4Ki1/XWTlgEAAAJud0NtjFvUf1UFKVdbwuERQAAUJjb3QDKEhRtIywCAIAKCZSo
+VeonolH3se6BoGg7YREAADTK/EkAK59flQRFn7fPpsIjYREAAHTK/EnAXj1UFdUUFLVGWAQAAANz
+uxvQI0HRMcIiAABgkUCJV6nnLfJEtHqOaw8ERccJiwAAgMPMnwTUQFCUhrAIAADIzvxJUKeeKroE
+RekIiwAAgCq43S3xAPZpPwVk9E5QlJawCAAAaEYNt7u1GLx8/H0VGNHtvFCCovSERQAAQDdKVCe1
+WpkkMKJHgqI8hEUAAMBQSlQn1TBv0ud/t2/bkTIw8kS0Oo3choKidIRFAAAAzwO/CsKkmO2I3Zec
+gRFUc90KipISFgEAAGwZlJ44b9KekCdnYNRCFYtqpQGuSUFRcsIiAACAlAPXjPMm7b29TYUR3V5v
+gqIshEUAAAClB7iZAqWt74kJjKafjhdjGy0oCkFYBAAAUKV3IU6qW9y+L3PS4PDu+hgwKApBWAQA
+ANCMUvMlAeMGRSEIiwAAALqR6va2PXMZnTWwtl7r7Wm9tRAWAQAADCBn1ZEgwXqtty/Coozc9QsA
+AJwt5glqHwb01mu9p663NsIiAACAzsQERAb01mu9day3RsIiAACATpQKiUYc0Fuv9Y5EWJTY5+2m
+EQAAgHrGKAkDolEH9NZrvaMRFgEAAHQoR0g04oDeeq13RMIiAACATuQKiEYd0Fuv9Y7qL00AAACA
+Ab31Wi93wiIAAAAM6K3XenkQFgEAAGBAb73WW3C9tRMWAQAAYEBvvdZbaL0tEBYBAABgQG+91ltg
+va0QFgEAAGBAb73Wm3m9LREWAQAAMEuQYL3W2856UxEWAQAA8JYBvfVabzvrTekyTdO0+U2XSwgh
+hNvt5tMTAMjuer2GEELY0W2hZMfydx9xenSO9RWhFS3fLgMtKhkgffzuR11+/3dMf0plEQAAAAAP
+wiIAAAAAHn5oAgAAgLG1OKcKkI/KIgAAAAAehEUAAAAAPAiLAAAAAHgQFgEAAADwYIJrAAAAivq4
+frz9+7mJtre8/vm1SxN3z71ubl1bl5n6PUe2K3adW4/DWvsfPb5737PlmJrc/T2VRQAAABSzNHB/
+929bX3/W9u/ZzjO2/+gxOrrcrcve856alt8qlUUAAAAUsVb18zpoX3r9/d8+rh+L1Sdbq19itu91
+uXu28/73qapz9tiyjyWWneo9Z+xvb1QWAQAAkF3M7WGxAczSa3Pac9vbnu08M7RYu+3r8/b5eM3W
+dj/aFjmO8xnnUQuERQAAABSzNQhZen3Mv81VK6UOZPZu52i3Qe1p99zhmYqi79yGBgAAABFShjqf
+t88vy4sNsfZMon10H9fmYzozbMndHqMSFgEAANCleyBzDzS2VBWVmDfoXfVTrsqnFPv4/HevYRd9
+ERYBAABApBwhzlxodHRC59T7WGM4pIIoD2ERAAAAxWy9bWntaWdrnquL7v8dY2sIcXQ7n9d55oTd
+e7Z9yzHds2+520OF1HcmuAYAACC7mKdOzT1ZbG0enVqeHrZlO1sLKO5PQXv9s8WeY5b7ONdyHtVG
+ZREAAABFPM9zs6UqaOn1MQP8Ek/T2rOde+ZFamVC55T7lqo9SsxD1QuVRQAAABSz9RHzex9Jb7+O
+i7l1b8utc3uqkfa8p6blt+oyTdO0+U2XSwghhNvtpgUBgOyu12sIIYQd3RZKdix/9xGnRwdcXxEA
+zvbxux91+f3fMf0plUUAAAAAPJizCACA09yrxl7NVbBvef3za5cq4udeN7eurctM/Z4j2xW7ztT7
+eH/t2nGda//YZS7tz1q77DlmAL1SWQQAwCmWBvbv/m3r68/a/j3becb2x+5jDccixTLn9qXm9oc9
+Pq4fi38gRrHKopikvvQvG3vWs+fLxS8yfpEBAOb7DDH9taXX3//ter0u9pP29AvXtu91uXu2c6mP
+d6RftsWWdR89FiXsOWZ7zw+ojcmaSaFIZVGqXx5S/nqzd3v37r9fZAAA1sOGd3+/9votPz6msue2
+tz3bWWvgcsaxOLq81tof4EzZK4u2/mq05XVry1/7ZWPLLw4pvlBTbXcNHQS/yAAAOfoae19/u90W
+K5zvP3jN9V9S9lf2budaFXlpe6uacrRnquW11P4AZ8paWbT1V6PUy6/h1wO/yPjCBQD6kzNcWqrk
+fve61z9792duOTX05e7bkONHyL3tD9CzIreh5f6CWftlo9aORMntzn1Puy9XAKBmr2HDliqSEkHK
+7XYTWpx8fmh/gD9+1LhRZ06SfOQLodQEhEe+BN+VYKdc9mtbqCoCAHqVo5/zroJmy5QKqfclV9+x
+tr7snvYH6NmPkXe+9nCn1Q6T0AgAiO2LbekjrD3tLKav8lwtErvuPU/KPbKdc/2qVo5diW0+crtd
+D+0PkNtfNW7UvQz0tRz0zKdb7Nnu5+2v5YumxPbMlfECALz2tbY+DGTtCbO1PBxky3a21E86eiy2
+PiE4VT+9l/YHKKVIZdHR0s21JyDs/WWjhvmM/CIDAIzouX+3pSpo6fUxfbsSc2nu2c49fdaUUzds
+DWy27mOq45dif1K1P0DPslYWbf3VKPXya3uKQ6rt9osMANCDrQ/7qPmhJr3u17uK8b3bnGo/j94F
+0Op5BVDSZZqmafObLpdNH55rQcJrBcrWx83HLv/19ak+/Pc+Qn7rdqfc19flbA1+UuwLAGz9rt3R
+baFkx/J3H/F+lD59/wPA6T5+96Muv/87pj9VZM6iFGn93mXU8uQGv8gAAAAALShSWQQAcITKokY6
+liqLAKA6eyqLfmg2AADoj2kCANhLWAQAAB0SBgGwl7BohV9kAAAAgJEIi1YIgwAAAICRCIsAAMji
+Y6VCGwCo01+aAAAAAIA7lUUAACR10QQA0PZ3+TRN0+Y3XXQBAIDydnRbKNmx1EcEgC76UyqLAAAo
+1vkEAOq3KyzSEQAAAADokwmuAQAAAHgQFgEAAADwICwCAAAA4EFYBAAAAMCDsAgAAACAB2ERAAAA
+AA/CIgAAAAAehEUAAAAAPAiLAAAAAHgQFgEAAADwICwCAAAA4EFYBAAAAMCDsAgAAACAB2ERAAAA
+AA/CIgAAAAAehEUAAAAAPAiLAAAAAHgQFgEAAADwICwCAAAA4EFYBAAAAMCDsAgAAACAB2ERAAAA
+AA/CIgAAAAAe/g/10lQlA3JSSwAAAABJRU5ErkJggg==
diff --git a/Documentation/DocBook/media/v4l/biblio.xml b/Documentation/DocBook/media/v4l/biblio.xml
index afc8a0dd2601..cea6fd3ed428 100644
--- a/Documentation/DocBook/media/v4l/biblio.xml
+++ b/Documentation/DocBook/media/v4l/biblio.xml
@@ -178,11 +178,3 @@ in the frequency range from 87,5 to 108,0 MHz</title>
</biblioentry>
</bibliography>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/common.xml b/Documentation/DocBook/media/v4l/common.xml
index a86f7a045529..c79278acfb0e 100644
--- a/Documentation/DocBook/media/v4l/common.xml
+++ b/Documentation/DocBook/media/v4l/common.xml
@@ -1168,6 +1168,8 @@ dheight = format.fmt.pix.height;
</section>
</section>
+ &sub-selection-api;
+
<section id="streaming-par">
<title>Streaming Parameters</title>
@@ -1195,11 +1197,3 @@ separate parameters for input and output devices.</para>
<para>These ioctls are optional, drivers need not implement
them. If so, they return the &EINVAL;.</para>
</section>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml
index b68698f96e7f..c736380b4647 100644
--- a/Documentation/DocBook/media/v4l/compat.xml
+++ b/Documentation/DocBook/media/v4l/compat.xml
@@ -1082,7 +1082,7 @@ until the time in the timestamp field has arrived. I would like to
follow SGI's lead, and adopt a multimedia timestamping system like
their UST (Unadjusted System Time). See
http://web.archive.org/web/*/http://reality.sgi.com
-/cpirazzi_engr/lg/time/intro.html.
+/cpirazzi_engr/lg/time/intro.html.
UST uses timestamps that are 64-bit signed integers
(not struct timeval's) and given in nanosecond units. The UST clock
starts at zero when the system is booted and runs continuously and
@@ -2376,6 +2376,23 @@ that used it. It was originally scheduled for removal in 2.6.35.
<listitem>
<para>V4L2_CTRL_FLAG_VOLATILE was added to signal volatile controls to userspace.</para>
</listitem>
+ <listitem>
+ <para>Add selection API for extended control over cropping and
+composing. Does not affect the compatibility of current drivers and
+applications. See <link linkend="selection-api"> selection API </link> for
+details.</para>
+ </listitem>
+ </orderedlist>
+ </section>
+
+ <section>
+ <title>V4L2 in Linux 3.3</title>
+ <orderedlist>
+ <listitem>
+ <para>Added <constant>V4L2_CID_ALPHA_COMPONENT</constant> control
+ to the <link linkend="control">User controls class</link>.
+ </para>
+ </listitem>
</orderedlist>
</section>
@@ -2489,6 +2506,9 @@ ioctls.</para>
<listitem>
<para>&VIDIOC-CREATE-BUFS; and &VIDIOC-PREPARE-BUF; ioctls.</para>
</listitem>
+ <listitem>
+ <para>Selection API. <xref linkend="selection-api" /></para>
+ </listitem>
</itemizedlist>
</section>
@@ -2507,11 +2527,3 @@ interfaces and should not be implemented in new drivers.</para>
</itemizedlist>
</section>
</section>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 3bc5ee8b2c74..a1be37897ad7 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -324,12 +324,6 @@ minimum value disables backlight compensation.</entry>
(usually a microscope).</entry>
</row>
<row>
- <entry><constant>V4L2_CID_LASTP1</constant></entry>
- <entry></entry>
- <entry>End of the predefined control IDs (currently
-<constant>V4L2_CID_ILLUMINATORS_2</constant> + 1).</entry>
- </row>
- <row>
<entry><constant>V4L2_CID_MIN_BUFFERS_FOR_CAPTURE</constant></entry>
<entry>integer</entry>
<entry>This is a read-only control that can be read by the application
@@ -345,6 +339,25 @@ and used as a hint to determine the number of OUTPUT buffers to pass to REQBUFS.
The value is the minimum number of OUTPUT buffers that is necessary for hardware
to work.</entry>
</row>
+ <row id="v4l2-alpha-component">
+ <entry><constant>V4L2_CID_ALPHA_COMPONENT</constant></entry>
+ <entry>integer</entry>
+ <entry> Sets the alpha color component on the capture device or on
+ the capture buffer queue of a mem-to-mem device. When a mem-to-mem
+ device produces frame format that includes an alpha component
+ (e.g. <link linkend="rgb-formats">packed RGB image formats</link>)
+ and the alpha value is not defined by the mem-to-mem input data
+ this control lets you select the alpha component value of all
+ pixels. It is applicable to any pixel format that contains an alpha
+ component.
+ </entry>
+ </row>
+ <row>
+ <entry><constant>V4L2_CID_LASTP1</constant></entry>
+ <entry></entry>
+ <entry>End of the predefined control IDs (currently
+ <constant>V4L2_CID_ALPHA_COMPONENT</constant> + 1).</entry>
+ </row>
<row>
<entry><constant>V4L2_CID_PRIVATE_BASE</constant></entry>
<entry></entry>
@@ -3329,6 +3342,16 @@ interface and may change in the future.</para>
<entry>The short circuit protection of the flash
controller has been triggered.</entry>
</row>
+ <row>
+ <entry><constant>V4L2_FLASH_FAULT_OVER_CURRENT</constant></entry>
+ <entry>Current in the LED power supply has exceeded the limit
+ specific to the flash controller.</entry>
+ </row>
+ <row>
+ <entry><constant>V4L2_FLASH_FAULT_INDICATOR</constant></entry>
+ <entry>The flash controller has detected a short or open
+ circuit condition on the indicator LED.</entry>
+ </row>
</tbody>
</entrytbl>
</row>
@@ -3357,11 +3380,3 @@ interface and may change in the future.</para>
</section>
</section>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "common.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/dev-capture.xml b/Documentation/DocBook/media/v4l/dev-capture.xml
index 2237c661f26a..e1c5f9406d6a 100644
--- a/Documentation/DocBook/media/v4l/dev-capture.xml
+++ b/Documentation/DocBook/media/v4l/dev-capture.xml
@@ -108,11 +108,3 @@ linkend="mmap">memory mapping</link> or <link
linkend="userp">user pointer</link>) I/O. See <xref
linkend="io" /> for details.</para>
</section>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/dev-codec.xml b/Documentation/DocBook/media/v4l/dev-codec.xml
index 6e156dc45b94..dca0ecd54dc6 100644
--- a/Documentation/DocBook/media/v4l/dev-codec.xml
+++ b/Documentation/DocBook/media/v4l/dev-codec.xml
@@ -16,11 +16,3 @@ Applications send data to be converted to the driver through a
I/O.</para>
<para>[to do]</para>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/dev-effect.xml b/Documentation/DocBook/media/v4l/dev-effect.xml
index 9c243beba0e6..2350a67c0710 100644
--- a/Documentation/DocBook/media/v4l/dev-effect.xml
+++ b/Documentation/DocBook/media/v4l/dev-effect.xml
@@ -15,11 +15,3 @@ receive the result data either with &func-read; and &func-write;
functions, or through the streaming I/O mechanism.</para>
<para>[to do]</para>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/dev-event.xml b/Documentation/DocBook/media/v4l/dev-event.xml
index f14ae3fe107c..19f4becfae34 100644
--- a/Documentation/DocBook/media/v4l/dev-event.xml
+++ b/Documentation/DocBook/media/v4l/dev-event.xml
@@ -41,11 +41,3 @@ intermediate step leading up to that information. See the documentation for the
event you want to subscribe to whether this is applicable for that event or not.</para>
</listitem>
</orderedlist></para>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/dev-osd.xml b/Documentation/DocBook/media/v4l/dev-osd.xml
index c9a68a2ccd33..479d9433869a 100644
--- a/Documentation/DocBook/media/v4l/dev-osd.xml
+++ b/Documentation/DocBook/media/v4l/dev-osd.xml
@@ -154,11 +154,3 @@ data flow. For more information see <xref linkend="crop" />.</para>
however the framebuffer interface of the driver may support the
<constant>FBIOBLANK</constant> ioctl.</para>
</section>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/dev-output.xml b/Documentation/DocBook/media/v4l/dev-output.xml
index 919e22c53854..9130a3dc7880 100644
--- a/Documentation/DocBook/media/v4l/dev-output.xml
+++ b/Documentation/DocBook/media/v4l/dev-output.xml
@@ -104,11 +104,3 @@ linkend="mmap">memory mapping</link> or <link
linkend="userp">user pointer</link>) I/O. See <xref
linkend="io" /> for details.</para>
</section>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/dev-overlay.xml b/Documentation/DocBook/media/v4l/dev-overlay.xml
index 92513cf79150..40d1d7681439 100644
--- a/Documentation/DocBook/media/v4l/dev-overlay.xml
+++ b/Documentation/DocBook/media/v4l/dev-overlay.xml
@@ -369,11 +369,3 @@ reasons. <!-- video4linux-list@redhat.com on 22 Oct 2002 subject
<para>To start or stop the frame buffer overlay applications call
the &VIDIOC-OVERLAY; ioctl.</para>
</section>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/dev-radio.xml b/Documentation/DocBook/media/v4l/dev-radio.xml
index 73aa90b45b34..3e6ac73b36af 100644
--- a/Documentation/DocBook/media/v4l/dev-radio.xml
+++ b/Documentation/DocBook/media/v4l/dev-radio.xml
@@ -47,11 +47,3 @@ depending on the selected frequency. The &VIDIOC-G-TUNER; or
&VIDIOC-G-MODULATOR; ioctl
reports the supported frequency range.</para>
</section>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/dev-raw-vbi.xml b/Documentation/DocBook/media/v4l/dev-raw-vbi.xml
index c5a70bdfaf27..b788c72c885e 100644
--- a/Documentation/DocBook/media/v4l/dev-raw-vbi.xml
+++ b/Documentation/DocBook/media/v4l/dev-raw-vbi.xml
@@ -337,11 +337,3 @@ an &EBUSY; if the required hardware resources are temporarily
unavailable, for example the device is already in use by another
process.</para>
</section>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/dev-rds.xml b/Documentation/DocBook/media/v4l/dev-rds.xml
index 2427f54397e7..38883a419e65 100644
--- a/Documentation/DocBook/media/v4l/dev-rds.xml
+++ b/Documentation/DocBook/media/v4l/dev-rds.xml
@@ -29,10 +29,10 @@ returned by the &VIDIOC-QUERYCAP; ioctl. Any tuner that supports RDS
will set the <constant>V4L2_TUNER_CAP_RDS</constant> flag in
the <structfield>capability</structfield> field of &v4l2-tuner;. If
the driver only passes RDS blocks without interpreting the data
-the <constant>V4L2_TUNER_SUB_RDS_BLOCK_IO</constant> flag has to be
+the <constant>V4L2_TUNER_CAP_RDS_BLOCK_IO</constant> flag has to be
set, see <link linkend="reading-rds-data">Reading RDS data</link>.
For future use the
-flag <constant>V4L2_TUNER_SUB_RDS_CONTROLS</constant> has also been
+flag <constant>V4L2_TUNER_CAP_RDS_CONTROLS</constant> has also been
defined. However, a driver for a radio tuner with this capability does
not yet exist, so if you are planning to write such a driver you
should discuss this on the linux-media mailing list: &v4l-ml;.</para>
@@ -52,9 +52,9 @@ field of &v4l2-modulator;.
In order to enable the RDS transmission one must set the <constant>V4L2_TUNER_SUB_RDS</constant>
bit in the <structfield>txsubchans</structfield> field of &v4l2-modulator;.
If the driver only passes RDS blocks without interpreting the data
-the <constant>V4L2_TUNER_SUB_RDS_BLOCK_IO</constant> flag has to be set. If the
+the <constant>V4L2_TUNER_CAP_RDS_BLOCK_IO</constant> flag has to be set. If the
tuner is capable of handling RDS entities like program identification codes and radio
-text, the flag <constant>V4L2_TUNER_SUB_RDS_CONTROLS</constant> should be set,
+text, the flag <constant>V4L2_TUNER_CAP_RDS_CONTROLS</constant> should be set,
see <link linkend="writing-rds-data">Writing RDS data</link> and
<link linkend="fm-tx-controls">FM Transmitter Control Reference</link>.</para>
</section>
@@ -194,11 +194,3 @@ as follows:</para>
</tgroup>
</table>
</section>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml b/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml
index 69e789fa7f7b..548f8ea28dee 100644
--- a/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml
+++ b/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml
@@ -697,12 +697,3 @@ Sliced VBI services</link> for a description of the line payload.</entry>
</section>
</section>
-
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/dev-teletext.xml b/Documentation/DocBook/media/v4l/dev-teletext.xml
index 414b1cfff9f4..bd21c64d70f3 100644
--- a/Documentation/DocBook/media/v4l/dev-teletext.xml
+++ b/Documentation/DocBook/media/v4l/dev-teletext.xml
@@ -27,11 +27,3 @@ kernel 2.6.37.</para>
<para>Modern devices all use the <link linkend="raw-vbi">raw</link> or
<link linkend="sliced">sliced</link> VBI API.</para>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/driver.xml b/Documentation/DocBook/media/v4l/driver.xml
index 1f7eea5c4ec3..eacafe312cd2 100644
--- a/Documentation/DocBook/media/v4l/driver.xml
+++ b/Documentation/DocBook/media/v4l/driver.xml
@@ -198,11 +198,3 @@ devices with the videodev module.</para>
<para>to do</para>
</section>
-->
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/func-close.xml b/Documentation/DocBook/media/v4l/func-close.xml
index dfb41cbbbec3..232920d2f3c6 100644
--- a/Documentation/DocBook/media/v4l/func-close.xml
+++ b/Documentation/DocBook/media/v4l/func-close.xml
@@ -60,11 +60,3 @@ descriptor.</para>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/func-ioctl.xml b/Documentation/DocBook/media/v4l/func-ioctl.xml
index 2de64be706f5..4394184a1a6d 100644
--- a/Documentation/DocBook/media/v4l/func-ioctl.xml
+++ b/Documentation/DocBook/media/v4l/func-ioctl.xml
@@ -69,11 +69,3 @@ their respective function and parameters are specified in <xref
the parameter remains unmodified.</para>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/func-mmap.xml b/Documentation/DocBook/media/v4l/func-mmap.xml
index 786732b64bbd..f31ad71bf301 100644
--- a/Documentation/DocBook/media/v4l/func-mmap.xml
+++ b/Documentation/DocBook/media/v4l/func-mmap.xml
@@ -181,11 +181,3 @@ complete the request.</para>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/func-munmap.xml b/Documentation/DocBook/media/v4l/func-munmap.xml
index e2c4190f9bb6..860d49ca54a5 100644
--- a/Documentation/DocBook/media/v4l/func-munmap.xml
+++ b/Documentation/DocBook/media/v4l/func-munmap.xml
@@ -74,11 +74,3 @@ mapped yet.</para>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/func-open.xml b/Documentation/DocBook/media/v4l/func-open.xml
index 7595d07a8c72..cf64e207c3ee 100644
--- a/Documentation/DocBook/media/v4l/func-open.xml
+++ b/Documentation/DocBook/media/v4l/func-open.xml
@@ -111,11 +111,3 @@ system has been reached.</para>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/func-poll.xml b/Documentation/DocBook/media/v4l/func-poll.xml
index ec3c718f5963..85cad8bff5ba 100644
--- a/Documentation/DocBook/media/v4l/func-poll.xml
+++ b/Documentation/DocBook/media/v4l/func-poll.xml
@@ -117,11 +117,3 @@ than <constant>OPEN_MAX</constant>.</para>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/func-read.xml b/Documentation/DocBook/media/v4l/func-read.xml
index a5089bf8873d..e218bbfbd362 100644
--- a/Documentation/DocBook/media/v4l/func-read.xml
+++ b/Documentation/DocBook/media/v4l/func-read.xml
@@ -179,11 +179,3 @@ type of device.</para>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/func-select.xml b/Documentation/DocBook/media/v4l/func-select.xml
index b6713623181f..e12a60d9bd85 100644
--- a/Documentation/DocBook/media/v4l/func-select.xml
+++ b/Documentation/DocBook/media/v4l/func-select.xml
@@ -128,11 +128,3 @@ zero or greater than <constant>FD_SETSIZE</constant>.</para>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/func-write.xml b/Documentation/DocBook/media/v4l/func-write.xml
index 2c09c09371c3..575207885726 100644
--- a/Documentation/DocBook/media/v4l/func-write.xml
+++ b/Documentation/DocBook/media/v4l/func-write.xml
@@ -126,11 +126,3 @@ type of device.</para>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/io.xml b/Documentation/DocBook/media/v4l/io.xml
index 3f47df1aa54a..b815929b5bba 100644
--- a/Documentation/DocBook/media/v4l/io.xml
+++ b/Documentation/DocBook/media/v4l/io.xml
@@ -1282,11 +1282,3 @@ line, top field first. The bottom field is transmitted first.</entry>
</mediaobject>
</figure>
</section>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/libv4l.xml b/Documentation/DocBook/media/v4l/libv4l.xml
index 3cb10ec51929..d3b71e20003c 100644
--- a/Documentation/DocBook/media/v4l/libv4l.xml
+++ b/Documentation/DocBook/media/v4l/libv4l.xml
@@ -158,10 +158,3 @@ still don't use libv4l.</para>
</section>
</section>
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-grey.xml b/Documentation/DocBook/media/v4l/pixfmt-grey.xml
index 3b72bc6b2de7..bee970d3f76d 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-grey.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-grey.xml
@@ -60,11 +60,3 @@ pixel image</title>
</example>
</refsect1>
</refentry>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-m420.xml b/Documentation/DocBook/media/v4l/pixfmt-m420.xml
index ce4bc019e5c0..aadae92c5d04 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-m420.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-m420.xml
@@ -137,11 +137,3 @@ pixel image</title>
</example>
</refsect1>
</refentry>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv12.xml b/Documentation/DocBook/media/v4l/pixfmt-nv12.xml
index 873f67035181..84dd4fd7cb80 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-nv12.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-nv12.xml
@@ -141,11 +141,3 @@ pixel image</title>
</example>
</refsect1>
</refentry>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml b/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml
index c9e166d9ded8..3fd3ce5df270 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml
@@ -144,11 +144,3 @@ CbCr plane has as many pad bytes after its rows.</para>
</example>
</refsect1>
</refentry>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv12mt.xml b/Documentation/DocBook/media/v4l/pixfmt-nv12mt.xml
index 7a2855a526c1..2f82b1da8dfe 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-nv12mt.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-nv12mt.xml
@@ -64,11 +64,3 @@ layout of macroblocks</title>
</example>
</refsect1>
</refentry>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv16.xml b/Documentation/DocBook/media/v4l/pixfmt-nv16.xml
index 26094035fc04..8ae1f8a810d0 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-nv16.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-nv16.xml
@@ -164,11 +164,3 @@ pixel image</title>
</example>
</refsect1>
</refentry>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv24.xml b/Documentation/DocBook/media/v4l/pixfmt-nv24.xml
new file mode 100644
index 000000000000..fb255f2ca9dd
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/pixfmt-nv24.xml
@@ -0,0 +1,121 @@
+ <refentry>
+ <refmeta>
+ <refentrytitle>V4L2_PIX_FMT_NV24 ('NV24'), V4L2_PIX_FMT_NV42 ('NV42')</refentrytitle>
+ &manvol;
+ </refmeta>
+ <refnamediv>
+ <refname id="V4L2-PIX-FMT-NV24"><constant>V4L2_PIX_FMT_NV24</constant></refname>
+ <refname id="V4L2-PIX-FMT-NV42"><constant>V4L2_PIX_FMT_NV42</constant></refname>
+ <refpurpose>Formats with full horizontal and vertical
+chroma resolutions, also known as YUV 4:4:4. One luminance and one
+chrominance plane with alternating chroma samples as opposed to
+<constant>V4L2_PIX_FMT_YVU420</constant></refpurpose>
+ </refnamediv>
+ <refsect1>
+ <title>Description</title>
+
+ <para>These are two-plane versions of the YUV 4:4:4 format. The three
+ components are separated into two sub-images or planes. The Y plane is
+ first, with each Y sample stored in one byte per pixel. For
+ <constant>V4L2_PIX_FMT_NV24</constant>, a combined CbCr plane
+ immediately follows the Y plane in memory. The CbCr plane has the same
+ width and height, in pixels, as the Y plane (and the image). Each line
+ contains one CbCr pair per pixel, with each Cb and Cr sample stored in
+ one byte. <constant>V4L2_PIX_FMT_NV42</constant> is the same except that
+ the Cb and Cr samples are swapped, the CrCb plane starts with a Cr
+ sample.</para>
+
+ <para>If the Y plane has pad bytes after each row, then the CbCr plane
+ has twice as many pad bytes after its rows.</para>
+
+ <example>
+ <title><constant>V4L2_PIX_FMT_NV24</constant> 4 &times; 4
+pixel image</title>
+
+ <formalpara>
+ <title>Byte Order.</title>
+ <para>Each cell is one byte.
+ <informaltable frame="none">
+ <tgroup cols="9" align="center">
+ <colspec align="left" colwidth="2*" />
+ <tbody valign="top">
+ <row>
+ <entry>start&nbsp;+&nbsp;0:</entry>
+ <entry>Y'<subscript>00</subscript></entry>
+ <entry>Y'<subscript>01</subscript></entry>
+ <entry>Y'<subscript>02</subscript></entry>
+ <entry>Y'<subscript>03</subscript></entry>
+ </row>
+ <row>
+ <entry>start&nbsp;+&nbsp;4:</entry>
+ <entry>Y'<subscript>10</subscript></entry>
+ <entry>Y'<subscript>11</subscript></entry>
+ <entry>Y'<subscript>12</subscript></entry>
+ <entry>Y'<subscript>13</subscript></entry>
+ </row>
+ <row>
+ <entry>start&nbsp;+&nbsp;8:</entry>
+ <entry>Y'<subscript>20</subscript></entry>
+ <entry>Y'<subscript>21</subscript></entry>
+ <entry>Y'<subscript>22</subscript></entry>
+ <entry>Y'<subscript>23</subscript></entry>
+ </row>
+ <row>
+ <entry>start&nbsp;+&nbsp;12:</entry>
+ <entry>Y'<subscript>30</subscript></entry>
+ <entry>Y'<subscript>31</subscript></entry>
+ <entry>Y'<subscript>32</subscript></entry>
+ <entry>Y'<subscript>33</subscript></entry>
+ </row>
+ <row>
+ <entry>start&nbsp;+&nbsp;16:</entry>
+ <entry>Cb<subscript>00</subscript></entry>
+ <entry>Cr<subscript>00</subscript></entry>
+ <entry>Cb<subscript>01</subscript></entry>
+ <entry>Cr<subscript>01</subscript></entry>
+ <entry>Cb<subscript>02</subscript></entry>
+ <entry>Cr<subscript>02</subscript></entry>
+ <entry>Cb<subscript>03</subscript></entry>
+ <entry>Cr<subscript>03</subscript></entry>
+ </row>
+ <row>
+ <entry>start&nbsp;+&nbsp;24:</entry>
+ <entry>Cb<subscript>10</subscript></entry>
+ <entry>Cr<subscript>10</subscript></entry>
+ <entry>Cb<subscript>11</subscript></entry>
+ <entry>Cr<subscript>11</subscript></entry>
+ <entry>Cb<subscript>12</subscript></entry>
+ <entry>Cr<subscript>12</subscript></entry>
+ <entry>Cb<subscript>13</subscript></entry>
+ <entry>Cr<subscript>13</subscript></entry>
+ </row>
+ <row>
+ <entry>start&nbsp;+&nbsp;32:</entry>
+ <entry>Cb<subscript>20</subscript></entry>
+ <entry>Cr<subscript>20</subscript></entry>
+ <entry>Cb<subscript>21</subscript></entry>
+ <entry>Cr<subscript>21</subscript></entry>
+ <entry>Cb<subscript>22</subscript></entry>
+ <entry>Cr<subscript>22</subscript></entry>
+ <entry>Cb<subscript>23</subscript></entry>
+ <entry>Cr<subscript>23</subscript></entry>
+ </row>
+ <row>
+ <entry>start&nbsp;+&nbsp;40:</entry>
+ <entry>Cb<subscript>30</subscript></entry>
+ <entry>Cr<subscript>30</subscript></entry>
+ <entry>Cb<subscript>31</subscript></entry>
+ <entry>Cr<subscript>31</subscript></entry>
+ <entry>Cb<subscript>32</subscript></entry>
+ <entry>Cr<subscript>32</subscript></entry>
+ <entry>Cb<subscript>33</subscript></entry>
+ <entry>Cr<subscript>33</subscript></entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </informaltable>
+ </para>
+ </formalpara>
+ </example>
+ </refsect1>
+ </refentry>
diff --git a/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml b/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml
index 4db272b8a0d3..166c8d65e4f7 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml
@@ -428,8 +428,11 @@ colorspace <constant>V4L2_COLORSPACE_SRGB</constant>.</para>
<para>Bit 7 is the most significant bit. The value of a = alpha
bits is undefined when reading from the driver, ignored when writing
to the driver, except when alpha blending has been negotiated for a
-<link linkend="overlay">Video Overlay</link> or <link
-linkend="osd">Video Output Overlay</link>.</para>
+<link linkend="overlay">Video Overlay</link> or <link linkend="osd">
+Video Output Overlay</link> or when alpha component has been configured
+for a <link linkend="capture">Video Capture</link> by means of <link
+linkend="v4l2-alpha-component"> <constant>V4L2_CID_ALPHA_COMPONENT
+</constant> </link> control.</para>
<example>
<title><constant>V4L2_PIX_FMT_BGR24</constant> 4 &times; 4 pixel
@@ -930,11 +933,3 @@ See &v4l-dvb; for access instructions.</para>
</refsect1>
</refentry>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-packed-yuv.xml b/Documentation/DocBook/media/v4l/pixfmt-packed-yuv.xml
index 3cab5d0ca75d..33fa5a47a865 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-packed-yuv.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-packed-yuv.xml
@@ -234,11 +234,3 @@ linkend="osd">Video Output Overlay</link>.</para>
</refsect1>
</refentry>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-sbggr16.xml b/Documentation/DocBook/media/v4l/pixfmt-sbggr16.xml
index 519a9efbac10..6494b05d84a1 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-sbggr16.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-sbggr16.xml
@@ -81,11 +81,3 @@ pixel image</title>
</example>
</refsect1>
</refentry>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-sbggr8.xml b/Documentation/DocBook/media/v4l/pixfmt-sbggr8.xml
index 5fe84ecc2ebe..5eaf2b42d3f7 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-sbggr8.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-sbggr8.xml
@@ -65,11 +65,3 @@ pixel image</title>
</example>
</refsect1>
</refentry>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-sgbrg8.xml b/Documentation/DocBook/media/v4l/pixfmt-sgbrg8.xml
index d67a472b0880..fee65dca79c5 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-sgbrg8.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-sgbrg8.xml
@@ -65,11 +65,3 @@ pixel image</title>
</example>
</refsect1>
</refentry>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml b/Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml
index 0cdf13b8ac1c..19727ab4c757 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml
@@ -65,11 +65,3 @@ columns and rows.</para>
</example>
</refsect1>
</refentry>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-uyvy.xml b/Documentation/DocBook/media/v4l/pixfmt-uyvy.xml
index 816c8d467c16..b1f6801a17ff 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-uyvy.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-uyvy.xml
@@ -118,11 +118,3 @@ pixel image</title>
</example>
</refsect1>
</refentry>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-vyuy.xml b/Documentation/DocBook/media/v4l/pixfmt-vyuy.xml
index 61f12a5e68d9..82803408b389 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-vyuy.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-vyuy.xml
@@ -118,11 +118,3 @@ pixel image</title>
</example>
</refsect1>
</refentry>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-y16.xml b/Documentation/DocBook/media/v4l/pixfmt-y16.xml
index d58404015078..ff4f727d5624 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-y16.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-y16.xml
@@ -79,11 +79,3 @@ pixel image</title>
</example>
</refsect1>
</refentry>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-y41p.xml b/Documentation/DocBook/media/v4l/pixfmt-y41p.xml
index 73c8536efb05..98dcb91d2917 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-y41p.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-y41p.xml
@@ -147,11 +147,3 @@ pixel image</title>
</example>
</refsect1>
</refentry>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv410.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv410.xml
index 8eb4a193d770..0869dce5f92c 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-yuv410.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-yuv410.xml
@@ -131,11 +131,3 @@ pixel image</title>
</example>
</refsect1>
</refentry>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv411p.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv411p.xml
index 00e0960a9869..086dc731bf02 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-yuv411p.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-yuv411p.xml
@@ -145,11 +145,3 @@ pixel image</title>
</example>
</refsect1>
</refentry>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv420.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv420.xml
index 42d7de5e456d..48649fac1596 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-yuv420.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-yuv420.xml
@@ -147,11 +147,3 @@ pixel image</title>
</example>
</refsect1>
</refentry>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml
index f5d8f57495c8..9957863daf18 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml
@@ -152,11 +152,3 @@ pixel image</title>
</example>
</refsect1>
</refentry>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuv422p.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv422p.xml
index 4348bd9f0d01..4ce6463fe0a5 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-yuv422p.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-yuv422p.xml
@@ -151,11 +151,3 @@ pixel image</title>
</example>
</refsect1>
</refentry>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-yuyv.xml b/Documentation/DocBook/media/v4l/pixfmt-yuyv.xml
index bdb2ffacbbcc..58384092251a 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-yuyv.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-yuyv.xml
@@ -118,11 +118,3 @@ pixel image</title>
</example>
</refsect1>
</refentry>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt-yvyu.xml b/Documentation/DocBook/media/v4l/pixfmt-yvyu.xml
index 40d17ae39dde..bfffdc76d3da 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-yvyu.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-yvyu.xml
@@ -118,11 +118,3 @@ pixel image</title>
</example>
</refsect1>
</refentry>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "pixfmt.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml b/Documentation/DocBook/media/v4l/pixfmt.xml
index 2ff6b7776d7f..31eaae2469f9 100644
--- a/Documentation/DocBook/media/v4l/pixfmt.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt.xml
@@ -714,6 +714,7 @@ information.</para>
&sub-nv12m;
&sub-nv12mt;
&sub-nv16;
+ &sub-nv24;
&sub-m420;
</section>
@@ -890,6 +891,11 @@ kernel sources in the file <filename>Documentation/video4linux/cx2341x/README.hm
<entry>'M310'</entry>
<entry>Compressed BGGR Bayer format used by the gspca driver.</entry>
</row>
+ <row id="V4L2-PIX-FMT-JL2005BCD">
+ <entry><constant>V4L2_PIX_FMT_JL2005BCD</constant></entry>
+ <entry>'JL20'</entry>
+ <entry>JPEG compressed RGGB Bayer format used by the gspca driver.</entry>
+ </row>
<row id="V4L2-PIX-FMT-OV511">
<entry><constant>V4L2_PIX_FMT_OV511</constant></entry>
<entry>'O511'</entry>
@@ -997,11 +1003,3 @@ the other bits are set to 0.</entry>
</tgroup>
</table>
</section>
-
- <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
- -->
diff --git a/Documentation/DocBook/media/v4l/selection-api.xml b/Documentation/DocBook/media/v4l/selection-api.xml
new file mode 100644
index 000000000000..2f0bdb4d5551
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/selection-api.xml
@@ -0,0 +1,321 @@
+<section id="selection-api">
+
+ <title>Experimental API for cropping, composing and scaling</title>
+
+ <note>
+ <title>Experimental</title>
+
+ <para>This is an <link linkend="experimental">experimental</link>
+interface and may change in the future.</para>
+ </note>
+
+ <section>
+ <title>Introduction</title>
+
+<para>Some video capture devices can sample a subsection of a picture and
+shrink or enlarge it to an image of arbitrary size. Next, the devices can
+insert the image into larger one. Some video output devices can crop part of an
+input image, scale it up or down and insert it at an arbitrary scan line and
+horizontal offset into a video signal. We call these abilities cropping,
+scaling and composing.</para>
+
+<para>On a video <emphasis>capture</emphasis> device the source is a video
+signal, and the cropping target determine the area actually sampled. The sink
+is an image stored in a memory buffer. The composing area specifies which part
+of the buffer is actually written to by the hardware. </para>
+
+<para>On a video <emphasis>output</emphasis> device the source is an image in a
+memory buffer, and the cropping target is a part of an image to be shown on a
+display. The sink is the display or the graphics screen. The application may
+select the part of display where the image should be displayed. The size and
+position of such a window is controlled by the compose target.</para>
+
+<para>Rectangles for all cropping and composing targets are defined even if the
+device does supports neither cropping nor composing. Their size and position
+will be fixed in such a case. If the device does not support scaling then the
+cropping and composing rectangles have the same size.</para>
+
+ </section>
+
+ <section>
+ <title>Selection targets</title>
+
+ <figure id="sel-targets-capture">
+ <title>Cropping and composing targets</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata fileref="selection.png" format="PNG" />
+ </imageobject>
+ <textobject>
+ <phrase>Targets used by a cropping, composing and scaling
+ process</phrase>
+ </textobject>
+ </mediaobject>
+ </figure>
+ </section>
+
+ <section>
+
+ <title>Configuration</title>
+
+<para>Applications can use the <link linkend="vidioc-g-selection">selection
+API</link> to select an area in a video signal or a buffer, and to query for
+default settings and hardware limits.</para>
+
+<para>Video hardware can have various cropping, composing and scaling
+limitations. It may only scale up or down, support only discrete scaling
+factors, or have different scaling abilities in the horizontal and vertical
+directions. Also it may not support scaling at all. At the same time the
+cropping/composing rectangles may have to be aligned, and both the source and
+the sink may have arbitrary upper and lower size limits. Therefore, as usual,
+drivers are expected to adjust the requested parameters and return the actual
+values selected. An application can control the rounding behaviour using <link
+linkend="v4l2-sel-flags"> constraint flags </link>.</para>
+
+ <section>
+
+ <title>Configuration of video capture</title>
+
+<para>See figure <xref linkend="sel-targets-capture" /> for examples of the
+selection targets available for a video capture device. It is recommended to
+configure the cropping targets before to the composing targets.</para>
+
+<para>The range of coordinates of the top left corner, width and height of
+areas that can be sampled is given by the <constant> V4L2_SEL_TGT_CROP_BOUNDS
+</constant> target. It is recommended for the driver developers to put the
+top/left corner at position <constant> (0,0) </constant>. The rectangle's
+coordinates are expressed in pixels.</para>
+
+<para>The top left corner, width and height of the source rectangle, that is
+the area actually sampled, is given by the <constant> V4L2_SEL_TGT_CROP_ACTIVE
+</constant> target. It uses the same coordinate system as <constant>
+V4L2_SEL_TGT_CROP_BOUNDS </constant>. The active cropping area must lie
+completely inside the capture boundaries. The driver may further adjust the
+requested size and/or position according to hardware limitations.</para>
+
+<para>Each capture device has a default source rectangle, given by the
+<constant> V4L2_SEL_TGT_CROP_DEFAULT </constant> target. This rectangle shall
+over what the driver writer considers the complete picture. Drivers shall set
+the active crop rectangle to the default when the driver is first loaded, but
+not later.</para>
+
+<para>The composing targets refer to a memory buffer. The limits of composing
+coordinates are obtained using <constant> V4L2_SEL_TGT_COMPOSE_BOUNDS
+</constant>. All coordinates are expressed in pixels. The rectangle's top/left
+corner must be located at position <constant> (0,0) </constant>. The width and
+height are equal to the image size set by <constant> VIDIOC_S_FMT </constant>.
+</para>
+
+<para>The part of a buffer into which the image is inserted by the hardware is
+controlled by the <constant> V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> target.
+The rectangle's coordinates are also expressed in the same coordinate system as
+the bounds rectangle. The composing rectangle must lie completely inside bounds
+rectangle. The driver must adjust the composing rectangle to fit to the
+bounding limits. Moreover, the driver can perform other adjustments according
+to hardware limitations. The application can control rounding behaviour using
+<link linkend="v4l2-sel-flags"> constraint flags </link>.</para>
+
+<para>For capture devices the default composing rectangle is queried using
+<constant> V4L2_SEL_TGT_COMPOSE_DEFAULT </constant>. It is usually equal to the
+bounding rectangle.</para>
+
+<para>The part of a buffer that is modified by the hardware is given by
+<constant> V4L2_SEL_TGT_COMPOSE_PADDED </constant>. It contains all pixels
+defined using <constant> V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> plus all
+padding data modified by hardware during insertion process. All pixels outside
+this rectangle <emphasis>must not</emphasis> be changed by the hardware. The
+content of pixels that lie inside the padded area but outside active area is
+undefined. The application can use the padded and active rectangles to detect
+where the rubbish pixels are located and remove them if needed.</para>
+
+ </section>
+
+ <section>
+
+ <title>Configuration of video output</title>
+
+<para>For output devices targets and ioctls are used similarly to the video
+capture case. The <emphasis> composing </emphasis> rectangle refers to the
+insertion of an image into a video signal. The cropping rectangles refer to a
+memory buffer. It is recommended to configure the composing targets before to
+the cropping targets.</para>
+
+<para>The cropping targets refer to the memory buffer that contains an image to
+be inserted into a video signal or graphical screen. The limits of cropping
+coordinates are obtained using <constant> V4L2_SEL_TGT_CROP_BOUNDS </constant>.
+All coordinates are expressed in pixels. The top/left corner is always point
+<constant> (0,0) </constant>. The width and height is equal to the image size
+specified using <constant> VIDIOC_S_FMT </constant> ioctl.</para>
+
+<para>The top left corner, width and height of the source rectangle, that is
+the area from which image date are processed by the hardware, is given by the
+<constant> V4L2_SEL_TGT_CROP_ACTIVE </constant>. Its coordinates are expressed
+in in the same coordinate system as the bounds rectangle. The active cropping
+area must lie completely inside the crop boundaries and the driver may further
+adjust the requested size and/or position according to hardware
+limitations.</para>
+
+<para>For output devices the default cropping rectangle is queried using
+<constant> V4L2_SEL_TGT_CROP_DEFAULT </constant>. It is usually equal to the
+bounding rectangle.</para>
+
+<para>The part of a video signal or graphics display where the image is
+inserted by the hardware is controlled by <constant>
+V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> target. The rectangle's coordinates
+are expressed in pixels. The composing rectangle must lie completely inside the
+bounds rectangle. The driver must adjust the area to fit to the bounding
+limits. Moreover, the driver can perform other adjustments according to
+hardware limitations. </para>
+
+<para>The device has a default composing rectangle, given by the <constant>
+V4L2_SEL_TGT_COMPOSE_DEFAULT </constant> target. This rectangle shall cover what
+the driver writer considers the complete picture. It is recommended for the
+driver developers to put the top/left corner at position <constant> (0,0)
+</constant>. Drivers shall set the active composing rectangle to the default
+one when the driver is first loaded.</para>
+
+<para>The devices may introduce additional content to video signal other than
+an image from memory buffers. It includes borders around an image. However,
+such a padded area is driver-dependent feature not covered by this document.
+Driver developers are encouraged to keep padded rectangle equal to active one.
+The padded target is accessed by the <constant> V4L2_SEL_TGT_COMPOSE_PADDED
+</constant> identifier. It must contain all pixels from the <constant>
+V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> target.</para>
+
+ </section>
+
+ <section>
+
+ <title>Scaling control.</title>
+
+<para>An application can detect if scaling is performed by comparing the width
+and the height of rectangles obtained using <constant> V4L2_SEL_TGT_CROP_ACTIVE
+</constant> and <constant> V4L2_SEL_TGT_COMPOSE_ACTIVE </constant> targets. If
+these are not equal then the scaling is applied. The application can compute
+the scaling ratios using these values.</para>
+
+ </section>
+
+ </section>
+
+ <section>
+
+ <title>Comparison with old cropping API.</title>
+
+<para>The selection API was introduced to cope with deficiencies of previous
+<link linkend="crop"> API </link>, that was designed to control simple capture
+devices. Later the cropping API was adopted by video output drivers. The ioctls
+are used to select a part of the display were the video signal is inserted. It
+should be considered as an API abuse because the described operation is
+actually the composing. The selection API makes a clear distinction between
+composing and cropping operations by setting the appropriate targets. The V4L2
+API lacks any support for composing to and cropping from an image inside a
+memory buffer. The application could configure a capture device to fill only a
+part of an image by abusing V4L2 API. Cropping a smaller image from a larger
+one is achieved by setting the field <structfield>
+&v4l2-pix-format;::bytesperline </structfield>. Introducing an image offsets
+could be done by modifying field <structfield> &v4l2-buffer;::m:userptr
+</structfield> before calling <constant> VIDIOC_QBUF </constant>. Those
+operations should be avoided because they are not portable (endianness), and do
+not work for macroblock and Bayer formats and mmap buffers. The selection API
+deals with configuration of buffer cropping/composing in a clear, intuitive and
+portable way. Next, with the selection API the concepts of the padded target
+and constraints flags are introduced. Finally, <structname> &v4l2-crop;
+</structname> and <structname> &v4l2-cropcap; </structname> have no reserved
+fields. Therefore there is no way to extend their functionality. The new
+<structname> &v4l2-selection; </structname> provides a lot of place for future
+extensions. Driver developers are encouraged to implement only selection API.
+The former cropping API would be simulated using the new one. </para>
+
+ </section>
+
+ <section>
+ <title>Examples</title>
+ <example>
+ <title>Resetting the cropping parameters</title>
+
+ <para>(A video capture device is assumed; change <constant>
+V4L2_BUF_TYPE_VIDEO_CAPTURE </constant> for other devices; change target to
+<constant> V4L2_SEL_TGT_COMPOSE_* </constant> family to configure composing
+area)</para>
+
+ <programlisting>
+
+ &v4l2-selection; sel = {
+ .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+ .target = V4L2_SEL_TGT_CROP_DEFAULT,
+ };
+ ret = ioctl(fd, &VIDIOC-G-SELECTION;, &amp;sel);
+ if (ret)
+ exit(-1);
+ sel.target = V4L2_SEL_TGT_CROP_ACTIVE;
+ ret = ioctl(fd, &VIDIOC-S-SELECTION;, &amp;sel);
+ if (ret)
+ exit(-1);
+
+ </programlisting>
+ </example>
+
+ <example>
+ <title>Simple downscaling</title>
+ <para>Setting a composing area on output of size of <emphasis> at most
+</emphasis> half of limit placed at a center of a display.</para>
+ <programlisting>
+
+ &v4l2-selection; sel = {
+ .type = V4L2_BUF_TYPE_VIDEO_OUTPUT,
+ .target = V4L2_SEL_TGT_COMPOSE_BOUNDS,
+ };
+ struct v4l2_rect r;
+
+ ret = ioctl(fd, &VIDIOC-G-SELECTION;, &amp;sel);
+ if (ret)
+ exit(-1);
+ /* setting smaller compose rectangle */
+ r.width = sel.r.width / 2;
+ r.height = sel.r.height / 2;
+ r.left = sel.r.width / 4;
+ r.top = sel.r.height / 4;
+ sel.r = r;
+ sel.target = V4L2_SEL_TGT_COMPOSE_ACTIVE;
+ sel.flags = V4L2_SEL_FLAG_LE;
+ ret = ioctl(fd, &VIDIOC-S-SELECTION;, &amp;sel);
+ if (ret)
+ exit(-1);
+
+ </programlisting>
+ </example>
+
+ <example>
+ <title>Querying for scaling factors</title>
+ <para>A video output device is assumed; change <constant>
+V4L2_BUF_TYPE_VIDEO_OUTPUT </constant> for other devices</para>
+ <programlisting>
+
+ &v4l2-selection; compose = {
+ .type = V4L2_BUF_TYPE_VIDEO_OUTPUT,
+ .target = V4L2_SEL_TGT_COMPOSE_ACTIVE,
+ };
+ &v4l2-selection; crop = {
+ .type = V4L2_BUF_TYPE_VIDEO_OUTPUT,
+ .target = V4L2_SEL_TGT_CROP_ACTIVE,
+ };
+ double hscale, vscale;
+
+ ret = ioctl(fd, &VIDIOC-G-SELECTION;, &amp;compose);
+ if (ret)
+ exit(-1);
+ ret = ioctl(fd, &VIDIOC-G-SELECTION;, &amp;crop);
+ if (ret)
+ exit(-1);
+
+ /* computing scaling factors */
+ hscale = (double)compose.r.width / crop.r.width;
+ vscale = (double)compose.r.height / crop.r.height;
+
+ </programlisting>
+ </example>
+
+ </section>
+
+</section>
diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml
index 2ab365c10fb9..e97c512861bb 100644
--- a/Documentation/DocBook/media/v4l/v4l2.xml
+++ b/Documentation/DocBook/media/v4l/v4l2.xml
@@ -501,6 +501,7 @@ and discussions on the V4L mailing list.</revremark>
&sub-g-output;
&sub-g-parm;
&sub-g-priority;
+ &sub-g-selection;
&sub-g-sliced-vbi-cap;
&sub-g-std;
&sub-g-tuner;
diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml b/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml
index 1d31427edd1b..0be17c232d3a 100644
--- a/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml
@@ -228,11 +228,3 @@ is out of bounds.</para>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml b/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml
index 71d373b6d36a..347d142e7431 100644
--- a/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml
@@ -156,11 +156,3 @@ bounds.</para>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-enuminput.xml b/Documentation/DocBook/media/v4l/vidioc-enuminput.xml
index 476fe1d2bba0..9b8efcd6e947 100644
--- a/Documentation/DocBook/media/v4l/vidioc-enuminput.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-enuminput.xml
@@ -311,11 +311,3 @@ out of bounds.</para>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml b/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml
index a281d26a195f..a64d5ef103fa 100644
--- a/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml
@@ -196,11 +196,3 @@ is out of bounds.</para>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-enumstd.xml b/Documentation/DocBook/media/v4l/vidioc-enumstd.xml
index 95803fe2c8e4..3a5fc5405f96 100644
--- a/Documentation/DocBook/media/v4l/vidioc-enumstd.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-enumstd.xml
@@ -381,11 +381,3 @@ is out of bounds.</para>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-ctrl.xml b/Documentation/DocBook/media/v4l/vidioc-g-ctrl.xml
index 5146d00782e3..12b1d0503e26 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-ctrl.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-ctrl.xml
@@ -127,11 +127,3 @@ this control belongs to.</para>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
index 5122ce87e0b8..6f1f9a629dc3 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
@@ -312,10 +312,3 @@ to store the payload and this error code is returned.</para>
</refsect1>
</refentry>
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml
index 055718231bc1..93817f337033 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml
@@ -295,7 +295,8 @@ set this field to zero.</entry>
<entry>The device is capable of non-destructive overlays.
When the driver clears this flag, only destructive overlays are
supported. There are no drivers yet which support both destructive and
-non-destructive overlays.</entry>
+non-destructive overlays. Video Output Overlays are in practice always
+non-destructive.</entry>
</row>
<row>
<entry><constant>V4L2_FBUF_CAP_CHROMAKEY</constant></entry>
@@ -339,8 +340,8 @@ blending makes no sense for destructive overlays.</entry>
<row>
<entry><constant>V4L2_FBUF_CAP_SRC_CHROMAKEY</constant></entry>
<entry>0x0080</entry>
- <entry>The device supports Source Chroma-keying. Framebuffer pixels
-with the chroma-key colors are replaced by video pixels, which is exactly opposite of
+ <entry>The device supports Source Chroma-keying. Video pixels
+with the chroma-key colors are replaced by framebuffer pixels, which is exactly opposite of
<constant>V4L2_FBUF_CAP_CHROMAKEY</constant></entry>
</row>
</tbody>
@@ -356,7 +357,9 @@ with the chroma-key colors are replaced by video pixels, which is exactly opposi
<entry><constant>V4L2_FBUF_FLAG_PRIMARY</constant></entry>
<entry>0x0001</entry>
<entry>The framebuffer is the primary graphics surface.
-In other words, the overlay is destructive. [?]</entry>
+In other words, the overlay is destructive. This flag is typically set by any
+driver that doesn't have the <constant>V4L2_FBUF_CAP_EXTERNOVERLAY</constant>
+capability and it is cleared otherwise.</entry>
</row>
<row>
<entry><constant>V4L2_FBUF_FLAG_OVERLAY</constant></entry>
@@ -366,9 +369,8 @@ size as the capture. [?]</entry>
</row>
<row>
<entry spanname="hspan">The purpose of
-<constant>V4L2_FBUF_FLAG_PRIMARY</constant> and
<constant>V4L2_FBUF_FLAG_OVERLAY</constant> was never quite clear.
-Most drivers seem to ignore these flags. For compatibility with the
+Most drivers seem to ignore this flag. For compatibility with the
<wordasword>bttv</wordasword> driver applications should set the
<constant>V4L2_FBUF_FLAG_OVERLAY</constant> flag.</entry>
</row>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml b/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml
index 062d72069090..16431813bebd 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml
@@ -135,11 +135,3 @@ wrong.</para>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-modulator.xml b/Documentation/DocBook/media/v4l/vidioc-g-modulator.xml
index 15ce660f0f5a..7f4ac7e41fa8 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-modulator.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-modulator.xml
@@ -236,11 +236,3 @@ mode.</entry>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-priority.xml b/Documentation/DocBook/media/v4l/vidioc-g-priority.xml
index 8f5e3da7002f..6a81b4fe9538 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-priority.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-priority.xml
@@ -133,11 +133,3 @@ priority.</para>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml
new file mode 100644
index 000000000000..a9d36e0c090e
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml
@@ -0,0 +1,304 @@
+<refentry id="vidioc-g-selection">
+
+ <refmeta>
+ <refentrytitle>ioctl VIDIOC_G_SELECTION, VIDIOC_S_SELECTION</refentrytitle>
+ &manvol;
+ </refmeta>
+
+ <refnamediv>
+ <refname>VIDIOC_G_SELECTION</refname>
+ <refname>VIDIOC_S_SELECTION</refname>
+ <refpurpose>Get or set one of the selection rectangles</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <funcsynopsis>
+ <funcprototype>
+ <funcdef>int <function>ioctl</function></funcdef>
+ <paramdef>int <parameter>fd</parameter></paramdef>
+ <paramdef>int <parameter>request</parameter></paramdef>
+ <paramdef>struct v4l2_selection *<parameter>argp</parameter></paramdef>
+ </funcprototype>
+ </funcsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Arguments</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><parameter>fd</parameter></term>
+ <listitem>
+ <para>&fd;</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>request</parameter></term>
+ <listitem>
+ <para>VIDIOC_G_SELECTION, VIDIOC_S_SELECTION</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>argp</parameter></term>
+ <listitem>
+ <para></para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Description</title>
+
+ <note>
+ <title>Experimental</title>
+ <para>This is an <link linkend="experimental"> experimental </link>
+ interface and may change in the future.</para>
+ </note>
+
+ <para>The ioctls are used to query and configure selection rectangles.</para>
+
+<para> To query the cropping (composing) rectangle set <structfield>
+&v4l2-selection;::type </structfield> to the respective buffer type. Do not
+use multiplanar buffers. Use <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE
+</constant> instead of <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE
+</constant>. Use <constant> V4L2_BUF_TYPE_VIDEO_OUTPUT </constant> instead of
+<constant> V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE </constant>. The next step is
+setting <structfield> &v4l2-selection;::target </structfield> to value
+<constant> V4L2_SEL_TGT_CROP_ACTIVE </constant> (<constant>
+V4L2_SEL_TGT_COMPOSE_ACTIVE </constant>). Please refer to table <xref
+linkend="v4l2-sel-target" /> or <xref linkend="selection-api" /> for additional
+targets. Fields <structfield> &v4l2-selection;::flags </structfield> and
+<structfield> &v4l2-selection;::reserved </structfield> are ignored and they
+must be filled with zeros. The driver fills the rest of the structure or
+returns &EINVAL; if incorrect buffer type or target was used. If cropping
+(composing) is not supported then the active rectangle is not mutable and it is
+always equal to the bounds rectangle. Finally, structure <structfield>
+&v4l2-selection;::r </structfield> is filled with the current cropping
+(composing) coordinates. The coordinates are expressed in driver-dependent
+units. The only exception are rectangles for images in raw formats, whose
+coordinates are always expressed in pixels. </para>
+
+<para> To change the cropping (composing) rectangle set <structfield>
+&v4l2-selection;::type </structfield> to the respective buffer type. Do not
+use multiplanar buffers. Use <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE
+</constant> instead of <constant> V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE
+</constant>. Use <constant> V4L2_BUF_TYPE_VIDEO_OUTPUT </constant> instead of
+<constant> V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE </constant>. The next step is
+setting <structfield> &v4l2-selection;::target </structfield> to value
+<constant> V4L2_SEL_TGT_CROP_ACTIVE </constant> (<constant>
+V4L2_SEL_TGT_COMPOSE_ACTIVE </constant>). Please refer to table <xref
+linkend="v4l2-sel-target" /> or <xref linkend="selection-api" /> for additional
+targets. Set desired active area into the field <structfield>
+&v4l2-selection;::r </structfield>. Field <structfield>
+&v4l2-selection;::reserved </structfield> is ignored and must be filled with
+zeros. The driver may adjust the rectangle coordinates. An application may
+introduce constraints to control rounding behaviour. Set the field
+<structfield> &v4l2-selection;::flags </structfield> to one of values:
+
+<itemizedlist>
+ <listitem>
+<para><constant>0</constant> - The driver can adjust the rectangle size freely
+and shall choose a crop/compose rectangle as close as possible to the requested
+one.</para>
+ </listitem>
+ <listitem>
+<para><constant>V4L2_SEL_FLAG_GE</constant> - The driver is not allowed to
+shrink the rectangle. The original rectangle must lay inside the adjusted
+one.</para>
+ </listitem>
+ <listitem>
+<para><constant>V4L2_SEL_FLAG_LE</constant> - The driver is not allowed to
+enlarge the rectangle. The adjusted rectangle must lay inside the original
+one.</para>
+ </listitem>
+ <listitem>
+<para><constant>V4L2_SEL_FLAG_GE | V4L2_SEL_FLAG_LE</constant> - The driver
+must choose the size exactly the same as in the requested rectangle.</para>
+ </listitem>
+</itemizedlist>
+
+Please refer to <xref linkend="sel-const-adjust" />.
+
+</para>
+
+<para> The driver may have to adjusts the requested dimensions against hardware
+limits and other parts as the pipeline, i.e. the bounds given by the
+capture/output window or TV display. The closest possible values of horizontal
+and vertical offset and sizes are chosen according to following priority:
+
+<orderedlist>
+ <listitem>
+ <para>Satisfy constraints from <structfield>&v4l2-selection;::flags</structfield>.</para>
+ </listitem>
+ <listitem>
+ <para>Adjust width, height, left, and top to hardware limits and alignments.</para>
+ </listitem>
+ <listitem>
+ <para>Keep center of adjusted rectangle as close as possible to the original one.</para>
+ </listitem>
+ <listitem>
+ <para>Keep width and height as close as possible to original ones.</para>
+ </listitem>
+ <listitem>
+ <para>Keep horizontal and vertical offset as close as possible to original ones.</para>
+ </listitem>
+</orderedlist>
+
+On success the field <structfield> &v4l2-selection;::r </structfield> contains
+the adjusted rectangle. When the parameters are unsuitable the application may
+modify the cropping (composing) or image parameters and repeat the cycle until
+satisfactory parameters have been negotiated. If constraints flags have to be
+violated at then ERANGE is returned. The error indicates that <emphasis> there
+exist no rectangle </emphasis> that satisfies the constraints.</para>
+
+ </refsect1>
+
+ <refsect1>
+ <table frame="none" pgwide="1" id="v4l2-sel-target">
+ <title>Selection targets.</title>
+ <tgroup cols="3">
+ &cs-def;
+ <tbody valign="top">
+ <row>
+ <entry><constant>V4L2_SEL_TGT_CROP_ACTIVE</constant></entry>
+ <entry>0</entry>
+ <entry>area that is currently cropped by hardware</entry>
+ </row>
+ <row>
+ <entry><constant>V4L2_SEL_TGT_CROP_DEFAULT</constant></entry>
+ <entry>1</entry>
+ <entry>suggested cropping rectangle that covers the "whole picture"</entry>
+ </row>
+ <row>
+ <entry><constant>V4L2_SEL_TGT_CROP_BOUNDS</constant></entry>
+ <entry>2</entry>
+ <entry>limits for the cropping rectangle</entry>
+ </row>
+ <row>
+ <entry><constant>V4L2_SEL_TGT_COMPOSE_ACTIVE</constant></entry>
+ <entry>256</entry>
+ <entry>area to which data are composed by hardware</entry>
+ </row>
+ <row>
+ <entry><constant>V4L2_SEL_TGT_COMPOSE_DEFAULT</constant></entry>
+ <entry>257</entry>
+ <entry>suggested composing rectangle that covers the "whole picture"</entry>
+ </row>
+ <row>
+ <entry><constant>V4L2_SEL_TGT_COMPOSE_BOUNDS</constant></entry>
+ <entry>258</entry>
+ <entry>limits for the composing rectangle</entry>
+ </row>
+ <row>
+ <entry><constant>V4L2_SEL_TGT_COMPOSE_PADDED</constant></entry>
+ <entry>259</entry>
+ <entry>the active area and all padding pixels that are inserted or modified by the hardware</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+ </refsect1>
+
+ <refsect1>
+ <table frame="none" pgwide="1" id="v4l2-sel-flags">
+ <title>Selection constraint flags</title>
+ <tgroup cols="3">
+ &cs-def;
+ <tbody valign="top">
+ <row>
+ <entry><constant>V4L2_SEL_FLAG_GE</constant></entry>
+ <entry>0x00000001</entry>
+ <entry>indicate that adjusted rectangle must contain a rectangle from <structfield>&v4l2-selection;::r</structfield></entry>
+ </row>
+ <row>
+ <entry><constant>V4L2_SEL_FLAG_LE</constant></entry>
+ <entry>0x00000002</entry>
+ <entry>indicate that adjusted rectangle must be inside a rectangle from <structfield>&v4l2-selection;::r</structfield></entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+ </refsect1>
+
+ <section>
+ <figure id="sel-const-adjust">
+ <title>Size adjustments with constraint flags.</title>
+ <mediaobject>
+ <imageobject>
+ <imagedata fileref="constraints.png" format="PNG" />
+ </imageobject>
+ <textobject>
+ <phrase>Behaviour of rectangle adjustment for different constraint
+ flags.</phrase>
+ </textobject>
+ </mediaobject>
+ </figure>
+ </section>
+
+ <refsect1>
+ <table pgwide="1" frame="none" id="v4l2-selection">
+ <title>struct <structname>v4l2_selection</structname></title>
+ <tgroup cols="3">
+ &cs-str;
+ <tbody valign="top">
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>type</structfield></entry>
+ <entry>Type of the buffer (from &v4l2-buf-type;)</entry>
+ </row>
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>target</structfield></entry>
+ <entry>used to select between <link linkend="v4l2-sel-target"> cropping and composing rectangles </link></entry>
+ </row>
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>flags</structfield></entry>
+ <entry>control over coordinates adjustments, refer to <link linkend="v4l2-sel-flags">selection flags</link></entry>
+ </row>
+ <row>
+ <entry>&v4l2-rect;</entry>
+ <entry><structfield>r</structfield></entry>
+ <entry>selection rectangle</entry>
+ </row>
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>reserved[9]</structfield></entry>
+ <entry>Reserved fields for future use</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+ </refsect1>
+
+ <refsect1>
+ &return-value;
+ <variablelist>
+ <varlistentry>
+ <term><errorcode>EINVAL</errorcode></term>
+ <listitem>
+ <para>The buffer <structfield> &v4l2-selection;::type </structfield>
+or <structfield> &v4l2-selection;::target </structfield> is not supported, or
+the <structfield> &v4l2-selection;::flags </structfield> are invalid.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><errorcode>ERANGE</errorcode></term>
+ <listitem>
+ <para>it is not possible to adjust a rectangle <structfield>
+&v4l2-selection;::r </structfield> that satisfies all contraints from
+<structfield> &v4l2-selection;::flags </structfield>.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><errorcode>EBUSY</errorcode></term>
+ <listitem>
+ <para>it is not possible to apply change of selection rectangle at the moment.
+Usually because streaming is in progress.</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+</refentry>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-std.xml b/Documentation/DocBook/media/v4l/vidioc-g-std.xml
index 37996f25b5d4..99ff1a016220 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-std.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-std.xml
@@ -88,11 +88,3 @@ standards.</para>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml
index bd98c734c06b..91ec2fb658f8 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml
@@ -318,6 +318,16 @@ standard.</para><!-- FIXME what if PAL+NTSC and Bi but not SAP? --></entry>
<entry>RDS capture is supported. This capability is only valid for
radio tuners.</entry>
</row>
+ <row>
+ <entry><constant>V4L2_TUNER_CAP_RDS_BLOCK_IO</constant></entry>
+ <entry>0x0100</entry>
+ <entry>The RDS data is passed as unparsed RDS blocks.</entry>
+ </row>
+ <row>
+ <entry><constant>V4L2_TUNER_CAP_RDS_CONTROLS</constant></entry>
+ <entry>0x0200</entry>
+ <entry>The RDS data is parsed by the hardware and set via controls.</entry>
+ </row>
</tbody>
</tgroup>
</table>
@@ -525,11 +535,3 @@ out of bounds.</para>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-querybuf.xml b/Documentation/DocBook/media/v4l/vidioc-querybuf.xml
index 5c104d42d31c..6e414d7b6df7 100644
--- a/Documentation/DocBook/media/v4l/vidioc-querybuf.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-querybuf.xml
@@ -100,11 +100,3 @@ supported, or the <structfield>index</structfield> is out of bounds.</para>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml b/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml
index 0ac0057a51c4..36660d311b51 100644
--- a/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml
@@ -443,11 +443,3 @@ or this particular menu item is not supported by the driver.</para>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml
index c30dcc4232c0..e013da845b11 100644
--- a/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml
@@ -125,11 +125,3 @@ wrong.</para>
</variablelist>
</refsect1>
</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/coccinelle.txt b/Documentation/coccinelle.txt
index 96b690348ba1..cf44eb6499b4 100644
--- a/Documentation/coccinelle.txt
+++ b/Documentation/coccinelle.txt
@@ -102,9 +102,15 @@ or
make coccicheck COCCI=<my_SP.cocci> MODE=report
- Using Coccinelle on (modified) files
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ Controlling Which Files are Processed by Coccinelle
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+By default the entire kernel source tree is checked.
+
+To apply Coccinelle to a specific directory, M= can be used.
+For example, to check drivers/net/wireless/ one may write:
+ make coccicheck M=drivers/net/wireless/
+
To apply Coccinelle on a file basis, instead of a directory basis, the
following command may be used:
diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt
new file mode 100644
index 000000000000..3c046ee6e8b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt
@@ -0,0 +1,14 @@
+* Atmel Direct Memory Access Controller (DMA)
+
+Required properties:
+- compatible: Should be "atmel,<chip>-dma"
+- reg: Should contain DMA registers location and length
+- interrupts: Should contain DMA interrupt
+
+Examples:
+
+dma@ffffec00 {
+ compatible = "atmel,at91sam9g45-dma";
+ reg = <0xffffec00 0x200>;
+ interrupts = <21>;
+};
diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
new file mode 100644
index 000000000000..19f6af47a792
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
@@ -0,0 +1,78 @@
+* Freescale MC13783/MC13892 Power Management Integrated Circuit (PMIC)
+
+Required properties:
+- compatible : Should be "fsl,mc13783" or "fsl,mc13892"
+
+Optional properties:
+- fsl,mc13xxx-uses-adc : Indicate the ADC is being used
+- fsl,mc13xxx-uses-codec : Indicate the Audio Codec is being used
+- fsl,mc13xxx-uses-rtc : Indicate the RTC is being used
+- fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used
+
+Sub-nodes:
+- regulators : Contain the regulator nodes. The MC13892 regulators are
+ bound using their names as listed below with their registers and bits
+ for enabling.
+
+ vcoincell : regulator VCOINCELL (register 13, bit 23)
+ sw1 : regulator SW1 (register 24, bit 0)
+ sw2 : regulator SW2 (register 25, bit 0)
+ sw3 : regulator SW3 (register 26, bit 0)
+ sw4 : regulator SW4 (register 27, bit 0)
+ swbst : regulator SWBST (register 29, bit 20)
+ vgen1 : regulator VGEN1 (register 32, bit 0)
+ viohi : regulator VIOHI (register 32, bit 3)
+ vdig : regulator VDIG (register 32, bit 9)
+ vgen2 : regulator VGEN2 (register 32, bit 12)
+ vpll : regulator VPLL (register 32, bit 15)
+ vusb2 : regulator VUSB2 (register 32, bit 18)
+ vgen3 : regulator VGEN3 (register 33, bit 0)
+ vcam : regulator VCAM (register 33, bit 6)
+ vvideo : regulator VVIDEO (register 33, bit 12)
+ vaudio : regulator VAUDIO (register 33, bit 15)
+ vsd : regulator VSD (register 33, bit 18)
+ gpo1 : regulator GPO1 (register 34, bit 6)
+ gpo2 : regulator GPO2 (register 34, bit 8)
+ gpo3 : regulator GPO3 (register 34, bit 10)
+ gpo4 : regulator GPO4 (register 34, bit 12)
+ pwgt1spi : regulator PWGT1SPI (register 34, bit 15)
+ pwgt2spi : regulator PWGT2SPI (register 34, bit 16)
+ vusb : regulator VUSB (register 50, bit 3)
+
+ The bindings details of individual regulator device can be found in:
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+Examples:
+
+ecspi@70010000 { /* ECSPI1 */
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
+ <&gpio3 25 0>; /* GPIO4_25 */
+ status = "okay";
+
+ pmic: mc13892@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mc13892";
+ spi-max-frequency = <6000000>;
+ reg = <0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <8>;
+
+ regulators {
+ sw1_reg: mc13892__sw1 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: mc13892__sw2 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/mfd/twl-familly.txt b/Documentation/devicetree/bindings/mfd/twl-familly.txt
new file mode 100644
index 000000000000..a66fcf946759
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/twl-familly.txt
@@ -0,0 +1,47 @@
+Texas Instruments TWL family
+
+The TWLs are Integrated Power Management Chips.
+Some version might contain much more analog function like
+USB transceiver or Audio amplifier.
+These chips are connected to an i2c bus.
+
+
+Required properties:
+- compatible : Must be "ti,twl4030";
+ For Integrated power-management/audio CODEC device used in OMAP3
+ based boards
+- compatible : Must be "ti,twl6030";
+ For Integrated power-management used in OMAP4 based boards
+- interrupts : This i2c device has an IRQ line connected to the main SoC
+- interrupt-controller : Since the twl support several interrupts internally,
+ it is considered as an interrupt controller cascaded to the SoC one.
+- #interrupt-cells = <1>;
+- interrupt-parent : The parent interrupt controller.
+
+Optional node:
+- Child nodes contain in the twl. The twl family is made of several variants
+ that support a different number of features.
+ The children nodes will thus depend of the capability of the variant.
+
+
+Example:
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/twl6030.pdf
+ */
+twl@48 {
+ compatible = "ti,twl6030";
+ reg = <0x48>;
+ interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ twl_rtc {
+ compatible = "ti,twl_rtc";
+ interrupts = <11>;
+ reg = <0>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/resource-names.txt b/Documentation/devicetree/bindings/resource-names.txt
new file mode 100644
index 000000000000..e280fef6f265
--- /dev/null
+++ b/Documentation/devicetree/bindings/resource-names.txt
@@ -0,0 +1,54 @@
+Some properties contain an ordered list of 1 or more datum which are
+normally accessed by index. However, some devices will have multiple
+values which are more naturally accessed by name. Device nodes can
+include a supplemental property for assigning names to each of the list
+items. The names property consists of a list of strings in the same
+order as the data in the resource property.
+
+The following supplemental names properties are defined.
+
+Resource Property Supplemental Names Property
+----------------- ---------------------------
+reg reg-names
+clocks clock-names
+interrupts interrupt-names
+
+Usage:
+
+The -names property must be used in conjunction with the normal resource
+property. If not it will be ignored.
+
+Examples:
+
+l4-abe {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x48000000 0x00001000>, /* MPU path */
+ <1 0 0x49000000 0x00001000>; /* L3 path */
+ mcasp {
+ compatible = "ti,mcasp";
+ reg = <0 0x10 0x10>, <0 0x20 0x10>,
+ <1 0x10 0x10>, <1 0x20 0x10>;
+ reg-names = "mpu", "dat",
+ "dma", "dma_dat";
+ interrupts = <11>, <12>;
+ interrupt-names = "rx", "tx";
+ };
+
+ timer {
+ compatible = "ti,timer";
+ reg = <0 0x40 0x10>, <1 0x40 0x10>;
+ reg-names = "mpu", "dma";
+ };
+};
+
+
+usb {
+ compatible = "ti,usb-host";
+ reg = <0x4a064000 0x800>, <0x4a064800 0x200>,
+ <0x4a064c00 0x200>;
+ reg-names = "config", "ohci", "ehci";
+ interrupts = <14>, <15>;
+ interrupt-names = "ohci", "ehci";
+};
diff --git a/Documentation/dma-buf-sharing.txt b/Documentation/dma-buf-sharing.txt
index 510eab32f392..225f96d88f55 100644
--- a/Documentation/dma-buf-sharing.txt
+++ b/Documentation/dma-buf-sharing.txt
@@ -219,6 +219,10 @@ NOTES:
If the exporter chooses not to allow an attach() operation once a
map_dma_buf() API has been called, it simply returns an error.
+Miscellaneous notes:
+- Any exporters or users of the dma-buf buffer sharing framework must have
+ a 'select DMA_SHARED_BUFFER' in their respective Kconfigs.
+
References:
[1] struct dma_buf_ops in include/linux/dma-buf.h
[2] All interfaces mentioned above defined in include/linux/dma-buf.h
diff --git a/Documentation/dmaengine.txt b/Documentation/dmaengine.txt
index 94b7e0f96b38..bbe6cb3d1856 100644
--- a/Documentation/dmaengine.txt
+++ b/Documentation/dmaengine.txt
@@ -75,6 +75,10 @@ The slave DMA usage consists of following steps:
slave_sg - DMA a list of scatter gather buffers from/to a peripheral
dma_cyclic - Perform a cyclic DMA operation from/to a peripheral till the
operation is explicitly stopped.
+ interleaved_dma - This is common to Slave as well as M2M clients. For slave
+ address of devices' fifo could be already known to the driver.
+ Various types of operations could be expressed by setting
+ appropriate values to the 'dma_interleaved_template' members.
A non-NULL return of this transfer API represents a "descriptor" for
the given transaction.
@@ -89,6 +93,10 @@ The slave DMA usage consists of following steps:
struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
size_t period_len, enum dma_data_direction direction);
+ struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)(
+ struct dma_chan *chan, struct dma_interleaved_template *xt,
+ unsigned long flags);
+
The peripheral driver is expected to have mapped the scatterlist for
the DMA operation prior to calling device_prep_slave_sg, and must
keep the scatterlist mapped until the DMA operation has completed.
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index e67be7afc78b..d1d4a179a382 100755
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -27,8 +27,8 @@ use IO::Handle;
"or51211", "or51132_qam", "or51132_vsb", "bluebird",
"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718",
"af9015", "ngene", "az6027", "lme2510_lg", "lme2510c_s7395",
- "lme2510c_s7395_old", "drxk", "drxk_terratec_h5", "tda10071",
- "it9135" );
+ "lme2510c_s7395_old", "drxk", "drxk_terratec_h5",
+ "drxk_hauppauge_hvr930c", "tda10071", "it9135", "it9137");
# Check args
syntax() if (scalar(@ARGV) != 1);
@@ -644,6 +644,24 @@ sub drxk {
"$fwfile"
}
+sub drxk_hauppauge_hvr930c {
+ my $url = "http://www.wintvcd.co.uk/drivers/";
+ my $zipfile = "HVR-9x0_5_10_325_28153_SIGNED.zip";
+ my $hash = "83ab82e7e9480ec8bf1ae0155ca63c88";
+ my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+ my $drvfile = "HVR-900/emOEM.sys";
+ my $fwfile = "dvb-usb-hauppauge-hvr930c-drxk.fw";
+
+ checkstandard();
+
+ wgetfile($zipfile, $url . $zipfile);
+ verify($zipfile, $hash);
+ unzip($zipfile, $tmpdir);
+ extract("$tmpdir/$drvfile", 0x117b0, 42692, "$fwfile");
+
+ "$fwfile"
+}
+
sub drxk_terratec_h5 {
my $url = "http://www.linuxtv.org/downloads/firmware/";
my $hash = "19000dada8e2741162ccc50cc91fa7f1";
@@ -658,6 +676,26 @@ sub drxk_terratec_h5 {
}
sub it9135 {
+ my $sourcefile = "dvb-usb-it9135.zip";
+ my $url = "http://www.ite.com.tw/uploads/firmware/v3.6.0.0/$sourcefile";
+ my $hash = "1e55f6c8833f1d0ae067c2bb2953e6a9";
+ my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 0);
+ my $outfile = "dvb-usb-it9135.fw";
+ my $fwfile1 = "dvb-usb-it9135-01.fw";
+ my $fwfile2 = "dvb-usb-it9135-02.fw";
+
+ checkstandard();
+
+ wgetfile($sourcefile, $url);
+ unzip($sourcefile, $tmpdir);
+ verify("$tmpdir/$outfile", $hash);
+ extract("$tmpdir/$outfile", 64, 8128, "$fwfile1");
+ extract("$tmpdir/$outfile", 12866, 5817, "$fwfile2");
+
+ "$fwfile1 $fwfile2"
+}
+
+sub it9137 {
my $url = "http://kworld.server261.com/kworld/CD/ITE_TiVme/V1.00/";
my $zipfile = "Driver_V10.323.1.0412.100412.zip";
my $hash = "79b597dc648698ed6820845c0c9d0d37";
diff --git a/Documentation/fb/api.txt b/Documentation/fb/api.txt
new file mode 100644
index 000000000000..d4ff7de85700
--- /dev/null
+++ b/Documentation/fb/api.txt
@@ -0,0 +1,306 @@
+ The Frame Buffer Device API
+ ---------------------------
+
+Last revised: June 21, 2011
+
+
+0. Introduction
+---------------
+
+This document describes the frame buffer API used by applications to interact
+with frame buffer devices. In-kernel APIs between device drivers and the frame
+buffer core are not described.
+
+Due to a lack of documentation in the original frame buffer API, drivers
+behaviours differ in subtle (and not so subtle) ways. This document describes
+the recommended API implementation, but applications should be prepared to
+deal with different behaviours.
+
+
+1. Capabilities
+---------------
+
+Device and driver capabilities are reported in the fixed screen information
+capabilities field.
+
+struct fb_fix_screeninfo {
+ ...
+ __u16 capabilities; /* see FB_CAP_* */
+ ...
+};
+
+Application should use those capabilities to find out what features they can
+expect from the device and driver.
+
+- FB_CAP_FOURCC
+
+The driver supports the four character code (FOURCC) based format setting API.
+When supported, formats are configured using a FOURCC instead of manually
+specifying color components layout.
+
+
+2. Types and visuals
+--------------------
+
+Pixels are stored in memory in hardware-dependent formats. Applications need
+to be aware of the pixel storage format in order to write image data to the
+frame buffer memory in the format expected by the hardware.
+
+Formats are described by frame buffer types and visuals. Some visuals require
+additional information, which are stored in the variable screen information
+bits_per_pixel, grayscale, red, green, blue and transp fields.
+
+Visuals describe how color information is encoded and assembled to create
+macropixels. Types describe how macropixels are stored in memory. The following
+types and visuals are supported.
+
+- FB_TYPE_PACKED_PIXELS
+
+Macropixels are stored contiguously in a single plane. If the number of bits
+per macropixel is not a multiple of 8, whether macropixels are padded to the
+next multiple of 8 bits or packed together into bytes depends on the visual.
+
+Padding at end of lines may be present and is then reported through the fixed
+screen information line_length field.
+
+- FB_TYPE_PLANES
+
+Macropixels are split across multiple planes. The number of planes is equal to
+the number of bits per macropixel, with plane i'th storing i'th bit from all
+macropixels.
+
+Planes are located contiguously in memory.
+
+- FB_TYPE_INTERLEAVED_PLANES
+
+Macropixels are split across multiple planes. The number of planes is equal to
+the number of bits per macropixel, with plane i'th storing i'th bit from all
+macropixels.
+
+Planes are interleaved in memory. The interleave factor, defined as the
+distance in bytes between the beginning of two consecutive interleaved blocks
+belonging to different planes, is stored in the fixed screen information
+type_aux field.
+
+- FB_TYPE_FOURCC
+
+Macropixels are stored in memory as described by the format FOURCC identifier
+stored in the variable screen information grayscale field.
+
+- FB_VISUAL_MONO01
+
+Pixels are black or white and stored on a number of bits (typically one)
+specified by the variable screen information bpp field.
+
+Black pixels are represented by all bits set to 1 and white pixels by all bits
+set to 0. When the number of bits per pixel is smaller than 8, several pixels
+are packed together in a byte.
+
+FB_VISUAL_MONO01 is currently used with FB_TYPE_PACKED_PIXELS only.
+
+- FB_VISUAL_MONO10
+
+Pixels are black or white and stored on a number of bits (typically one)
+specified by the variable screen information bpp field.
+
+Black pixels are represented by all bits set to 0 and white pixels by all bits
+set to 1. When the number of bits per pixel is smaller than 8, several pixels
+are packed together in a byte.
+
+FB_VISUAL_MONO01 is currently used with FB_TYPE_PACKED_PIXELS only.
+
+- FB_VISUAL_TRUECOLOR
+
+Pixels are broken into red, green and blue components, and each component
+indexes a read-only lookup table for the corresponding value. Lookup tables
+are device-dependent, and provide linear or non-linear ramps.
+
+Each component is stored in a macropixel according to the variable screen
+information red, green, blue and transp fields.
+
+- FB_VISUAL_PSEUDOCOLOR and FB_VISUAL_STATIC_PSEUDOCOLOR
+
+Pixel values are encoded as indices into a colormap that stores red, green and
+blue components. The colormap is read-only for FB_VISUAL_STATIC_PSEUDOCOLOR
+and read-write for FB_VISUAL_PSEUDOCOLOR.
+
+Each pixel value is stored in the number of bits reported by the variable
+screen information bits_per_pixel field.
+
+- FB_VISUAL_DIRECTCOLOR
+
+Pixels are broken into red, green and blue components, and each component
+indexes a programmable lookup table for the corresponding value.
+
+Each component is stored in a macropixel according to the variable screen
+information red, green, blue and transp fields.
+
+- FB_VISUAL_FOURCC
+
+Pixels are encoded and interpreted as described by the format FOURCC
+identifier stored in the variable screen information grayscale field.
+
+
+3. Screen information
+---------------------
+
+Screen information are queried by applications using the FBIOGET_FSCREENINFO
+and FBIOGET_VSCREENINFO ioctls. Those ioctls take a pointer to a
+fb_fix_screeninfo and fb_var_screeninfo structure respectively.
+
+struct fb_fix_screeninfo stores device independent unchangeable information
+about the frame buffer device and the current format. Those information can't
+be directly modified by applications, but can be changed by the driver when an
+application modifies the format.
+
+struct fb_fix_screeninfo {
+ char id[16]; /* identification string eg "TT Builtin" */
+ unsigned long smem_start; /* Start of frame buffer mem */
+ /* (physical address) */
+ __u32 smem_len; /* Length of frame buffer mem */
+ __u32 type; /* see FB_TYPE_* */
+ __u32 type_aux; /* Interleave for interleaved Planes */
+ __u32 visual; /* see FB_VISUAL_* */
+ __u16 xpanstep; /* zero if no hardware panning */
+ __u16 ypanstep; /* zero if no hardware panning */
+ __u16 ywrapstep; /* zero if no hardware ywrap */
+ __u32 line_length; /* length of a line in bytes */
+ unsigned long mmio_start; /* Start of Memory Mapped I/O */
+ /* (physical address) */
+ __u32 mmio_len; /* Length of Memory Mapped I/O */
+ __u32 accel; /* Indicate to driver which */
+ /* specific chip/card we have */
+ __u16 capabilities; /* see FB_CAP_* */
+ __u16 reserved[2]; /* Reserved for future compatibility */
+};
+
+struct fb_var_screeninfo stores device independent changeable information
+about a frame buffer device, its current format and video mode, as well as
+other miscellaneous parameters.
+
+struct fb_var_screeninfo {
+ __u32 xres; /* visible resolution */
+ __u32 yres;
+ __u32 xres_virtual; /* virtual resolution */
+ __u32 yres_virtual;
+ __u32 xoffset; /* offset from virtual to visible */
+ __u32 yoffset; /* resolution */
+
+ __u32 bits_per_pixel; /* guess what */
+ __u32 grayscale; /* 0 = color, 1 = grayscale, */
+ /* >1 = FOURCC */
+ struct fb_bitfield red; /* bitfield in fb mem if true color, */
+ struct fb_bitfield green; /* else only length is significant */
+ struct fb_bitfield blue;
+ struct fb_bitfield transp; /* transparency */
+
+ __u32 nonstd; /* != 0 Non standard pixel format */
+
+ __u32 activate; /* see FB_ACTIVATE_* */
+
+ __u32 height; /* height of picture in mm */
+ __u32 width; /* width of picture in mm */
+
+ __u32 accel_flags; /* (OBSOLETE) see fb_info.flags */
+
+ /* Timing: All values in pixclocks, except pixclock (of course) */
+ __u32 pixclock; /* pixel clock in ps (pico seconds) */
+ __u32 left_margin; /* time from sync to picture */
+ __u32 right_margin; /* time from picture to sync */
+ __u32 upper_margin; /* time from sync to picture */
+ __u32 lower_margin;
+ __u32 hsync_len; /* length of horizontal sync */
+ __u32 vsync_len; /* length of vertical sync */
+ __u32 sync; /* see FB_SYNC_* */
+ __u32 vmode; /* see FB_VMODE_* */
+ __u32 rotate; /* angle we rotate counter clockwise */
+ __u32 colorspace; /* colorspace for FOURCC-based modes */
+ __u32 reserved[4]; /* Reserved for future compatibility */
+};
+
+To modify variable information, applications call the FBIOPUT_VSCREENINFO
+ioctl with a pointer to a fb_var_screeninfo structure. If the call is
+successful, the driver will update the fixed screen information accordingly.
+
+Instead of filling the complete fb_var_screeninfo structure manually,
+applications should call the FBIOGET_VSCREENINFO ioctl and modify only the
+fields they care about.
+
+
+4. Format configuration
+-----------------------
+
+Frame buffer devices offer two ways to configure the frame buffer format: the
+legacy API and the FOURCC-based API.
+
+
+The legacy API has been the only frame buffer format configuration API for a
+long time and is thus widely used by application. It is the recommended API
+for applications when using RGB and grayscale formats, as well as legacy
+non-standard formats.
+
+To select a format, applications set the fb_var_screeninfo bits_per_pixel field
+to the desired frame buffer depth. Values up to 8 will usually map to
+monochrome, grayscale or pseudocolor visuals, although this is not required.
+
+- For grayscale formats, applications set the grayscale field to one. The red,
+ blue, green and transp fields must be set to 0 by applications and ignored by
+ drivers. Drivers must fill the red, blue and green offsets to 0 and lengths
+ to the bits_per_pixel value.
+
+- For pseudocolor formats, applications set the grayscale field to zero. The
+ red, blue, green and transp fields must be set to 0 by applications and
+ ignored by drivers. Drivers must fill the red, blue and green offsets to 0
+ and lengths to the bits_per_pixel value.
+
+- For truecolor and directcolor formats, applications set the grayscale field
+ to zero, and the red, blue, green and transp fields to describe the layout of
+ color components in memory.
+
+struct fb_bitfield {
+ __u32 offset; /* beginning of bitfield */
+ __u32 length; /* length of bitfield */
+ __u32 msb_right; /* != 0 : Most significant bit is */
+ /* right */
+};
+
+ Pixel values are bits_per_pixel wide and are split in non-overlapping red,
+ green, blue and alpha (transparency) components. Location and size of each
+ component in the pixel value are described by the fb_bitfield offset and
+ length fields. Offset are computed from the right.
+
+ Pixels are always stored in an integer number of bytes. If the number of
+ bits per pixel is not a multiple of 8, pixel values are padded to the next
+ multiple of 8 bits.
+
+Upon successful format configuration, drivers update the fb_fix_screeninfo
+type, visual and line_length fields depending on the selected format.
+
+
+The FOURCC-based API replaces format descriptions by four character codes
+(FOURCC). FOURCCs are abstract identifiers that uniquely define a format
+without explicitly describing it. This is the only API that supports YUV
+formats. Drivers are also encouraged to implement the FOURCC-based API for RGB
+and grayscale formats.
+
+Drivers that support the FOURCC-based API report this capability by setting
+the FB_CAP_FOURCC bit in the fb_fix_screeninfo capabilities field.
+
+FOURCC definitions are located in the linux/videodev2.h header. However, and
+despite starting with the V4L2_PIX_FMT_prefix, they are not restricted to V4L2
+and don't require usage of the V4L2 subsystem. FOURCC documentation is
+available in Documentation/DocBook/v4l/pixfmt.xml.
+
+To select a format, applications set the grayscale field to the desired FOURCC.
+For YUV formats, they should also select the appropriate colorspace by setting
+the colorspace field to one of the colorspaces listed in linux/videodev2.h and
+documented in Documentation/DocBook/v4l/colorspaces.xml.
+
+The red, green, blue and transp fields are not used with the FOURCC-based API.
+For forward compatibility reasons applications must zero those fields, and
+drivers must ignore them. Values other than 0 may get a meaning in future
+extensions.
+
+Upon successful format configuration, drivers update the fb_fix_screeninfo
+type, visual and line_length fields depending on the selected format. The type
+and visual fields are set to FB_TYPE_FOURCC and FB_VISUAL_FOURCC respectively.
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index d49c2ec72d12..d725c0dfe032 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -439,41 +439,6 @@ Who: Jean Delvare <khali@linux-fr.org>
----------------------------
-What: Support for driver specific ioctls in the pwc driver (everything
- defined in media/pwc-ioctl.h)
-When: 3.3
-Why: This stems from the v4l1 era, with v4l2 everything can be done with
- standardized v4l2 API calls
-Who: Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
-What: Driver specific sysfs API in the pwc driver
-When: 3.3
-Why: Setting pan/tilt should be done with v4l2 controls, like with other
- cams. The button is available as a standard input device
-Who: Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
-What: Driver specific use of pixfmt.priv in the pwc driver
-When: 3.3
-Why: The .priv field never was intended for this, setting a framerate is
- support using the standardized S_PARM ioctl
-Who: Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
-What: Software emulation of arbritary resolutions in the pwc driver
-When: 3.3
-Why: The pwc driver claims to support any resolution between 160x120
- and 640x480, but emulates this by simply drawing a black border
- around the image. Userspace can draw its own black border if it
- really wants one.
-Who: Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
What: For VIDIOC_S_FREQUENCY the type field must match the device node's type.
If not, return -EINVAL.
When: 3.2
diff --git a/Documentation/filesystems/ceph.txt b/Documentation/filesystems/ceph.txt
index 763d8ebbbebd..d6030aa33376 100644
--- a/Documentation/filesystems/ceph.txt
+++ b/Documentation/filesystems/ceph.txt
@@ -119,12 +119,20 @@ Mount Options
must rely on TCP's error correction to detect data corruption
in the data payload.
- noasyncreaddir
- Disable client's use its local cache to satisfy readdir
- requests. (This does not change correctness; the client uses
- cached metadata only when a lease or capability ensures it is
- valid.)
+ dcache
+ Use the dcache contents to perform negative lookups and
+ readdir when the client has the entire directory contents in
+ its cache. (This does not change correctness; the client uses
+ cached metadata only when a lease or capability ensures it is
+ valid.)
+
+ nodcache
+ Do not use the dcache as above. This avoids a significant amount of
+ complex code, sacrificing performance without affecting correctness,
+ and is useful for tracking down bugs.
+ noasyncreaddir
+ Do not use the dcache as above for readdir.
More Information
================
diff --git a/Documentation/filesystems/nfs/00-INDEX b/Documentation/filesystems/nfs/00-INDEX
index a57e12411d2a..1716874a651e 100644
--- a/Documentation/filesystems/nfs/00-INDEX
+++ b/Documentation/filesystems/nfs/00-INDEX
@@ -2,6 +2,8 @@
- this file (nfs-related documentation).
Exporting
- explanation of how to make filesystems exportable.
+fault_injection.txt
+ - information for using fault injection on the server
knfsd-stats.txt
- statistics which the NFS server makes available to user space.
nfs.txt
diff --git a/Documentation/filesystems/nfs/fault_injection.txt b/Documentation/filesystems/nfs/fault_injection.txt
new file mode 100644
index 000000000000..426d166089a3
--- /dev/null
+++ b/Documentation/filesystems/nfs/fault_injection.txt
@@ -0,0 +1,69 @@
+
+Fault Injection
+===============
+Fault injection is a method for forcing errors that may not normally occur, or
+may be difficult to reproduce. Forcing these errors in a controlled environment
+can help the developer find and fix bugs before their code is shipped in a
+production system. Injecting an error on the Linux NFS server will allow us to
+observe how the client reacts and if it manages to recover its state correctly.
+
+NFSD_FAULT_INJECTION must be selected when configuring the kernel to use this
+feature.
+
+
+Using Fault Injection
+=====================
+On the client, mount the fault injection server through NFS v4.0+ and do some
+work over NFS (open files, take locks, ...).
+
+On the server, mount the debugfs filesystem to <debug_dir> and ls
+<debug_dir>/nfsd. This will show a list of files that will be used for
+injecting faults on the NFS server. As root, write a number n to the file
+corresponding to the action you want the server to take. The server will then
+process the first n items it finds. So if you want to forget 5 locks, echo '5'
+to <debug_dir>/nfsd/forget_locks. A value of 0 will tell the server to forget
+all corresponding items. A log message will be created containing the number
+of items forgotten (check dmesg).
+
+Go back to work on the client and check if the client recovered from the error
+correctly.
+
+
+Available Faults
+================
+forget_clients:
+ The NFS server keeps a list of clients that have placed a mount call. If
+ this list is cleared, the server will have no knowledge of who the client
+ is, forcing the client to reauthenticate with the server.
+
+forget_openowners:
+ The NFS server keeps a list of what files are currently opened and who
+ they were opened by. Clearing this list will force the client to reopen
+ its files.
+
+forget_locks:
+ The NFS server keeps a list of what files are currently locked in the VFS.
+ Clearing this list will force the client to reclaim its locks (files are
+ unlocked through the VFS as they are cleared from this list).
+
+forget_delegations:
+ A delegation is used to assure the client that a file, or part of a file,
+ has not changed since the delegation was awarded. Clearing this list will
+ force the client to reaquire its delegation before accessing the file
+ again.
+
+recall_delegations:
+ Delegations can be recalled by the server when another client attempts to
+ access a file. This test will notify the client that its delegation has
+ been revoked, forcing the client to reaquire the delegation before using
+ the file again.
+
+
+tools/nfs/inject_faults.sh script
+=================================
+This script has been created to ease the fault injection process. This script
+will detect the mounted debugfs directory and write to the files located there
+based on the arguments passed by the user. For example, running
+`inject_faults.sh forget_locks 1` as root will instruct the server to forget
+one lock. Running `inject_faults forget_locks` will instruct the server to
+forgetall locks.
diff --git a/Documentation/filesystems/squashfs.txt b/Documentation/filesystems/squashfs.txt
index 7db3ebda5a4c..403c090aca39 100644
--- a/Documentation/filesystems/squashfs.txt
+++ b/Documentation/filesystems/squashfs.txt
@@ -93,8 +93,8 @@ byte alignment:
Compressed data blocks are written to the filesystem as files are read from
the source directory, and checked for duplicates. Once all file data has been
-written the completed inode, directory, fragment, export and uid/gid lookup
-tables are written.
+written the completed inode, directory, fragment, export, uid/gid lookup and
+xattr tables are written.
3.1 Compression options
-----------------------
@@ -151,7 +151,7 @@ in each metadata block. Directories are sorted in alphabetical order,
and at lookup the index is scanned linearly looking for the first filename
alphabetically larger than the filename being looked up. At this point the
location of the metadata block the filename is in has been found.
-The general idea of the index is ensure only one metadata block needs to be
+The general idea of the index is to ensure only one metadata block needs to be
decompressed to do a lookup irrespective of the length of the directory.
This scheme has the advantage that it doesn't require extra memory overhead
and doesn't require much extra storage on disk.
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 6f496a586732..23b7def21ba8 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -26,6 +26,10 @@ Supported chips:
Prefix: 'it8721'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Not publicly available
+ * IT8728F
+ Prefix: 'it8728'
+ Addresses scanned: from Super I/O config space (8 I/O ports)
+ Datasheet: Not publicly available
* SiS950 [clone of IT8705F]
Prefix: 'it87'
Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -71,7 +75,7 @@ Description
-----------
This driver implements support for the IT8705F, IT8712F, IT8716F,
-IT8718F, IT8720F, IT8721F, IT8726F, IT8758E and SiS950 chips.
+IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E and SiS950 chips.
These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
joysticks and other miscellaneous stuff. For hardware monitoring, they
@@ -105,6 +109,9 @@ The IT8726F is just bit enhanced IT8716F with additional hardware
for AMD power sequencing. Therefore the chip will appear as IT8716F
to userspace applications.
+The IT8728F is considered compatible with the IT8721F, until a datasheet
+becomes available (hopefully.)
+
Temperatures are measured in degrees Celsius. An alarm is triggered once
when the Overtemperature Shutdown limit is crossed.
@@ -121,8 +128,8 @@ alarm is triggered if the voltage has crossed a programmable minimum or
maximum limit. Note that minimum in this case always means 'closest to
zero'; this is important for negative voltage measurements. All voltage
inputs can measure voltages between 0 and 4.08 volts, with a resolution of
-0.016 volt (except IT8721F/IT8758E: 0.012 volt.) The battery voltage in8 does
-not have limit registers.
+0.016 volt (except IT8721F/IT8758E and IT8728F: 0.012 volt.) The battery
+voltage in8 does not have limit registers.
On the IT8721F/IT8758E, some voltage inputs are internal and scaled inside
the chip (in7, in8 and optionally in3). The driver handles this transparently
diff --git a/Documentation/hwmon/lm63 b/Documentation/hwmon/lm63
index b9843eab1afb..4d30d209881a 100644
--- a/Documentation/hwmon/lm63
+++ b/Documentation/hwmon/lm63
@@ -12,6 +12,11 @@ Supported chips:
Addresses scanned: I2C 0x18 and 0x4e
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/pf/LM/LM64.html
+ * National Semiconductor LM96163
+ Prefix: 'lm96163'
+ Addresses scanned: I2C 0x4c
+ Datasheet: Publicly available at the National Semiconductor website
+ http://www.national.com/pf/LM/LM96163.html
Author: Jean Delvare <khali@linux-fr.org>
@@ -49,16 +54,24 @@ value for measuring the speed of the fan. It can measure fan speeds down to
Note that the pin used for fan monitoring is shared with an alert out
function. Depending on how the board designer wanted to use the chip, fan
speed monitoring will or will not be possible. The proper chip configuration
-is left to the BIOS, and the driver will blindly trust it.
+is left to the BIOS, and the driver will blindly trust it. Only the original
+LM63 suffers from this limitation, the LM64 and LM96163 have separate pins
+for fan monitoring and alert out. On the LM64, monitoring is always enabled;
+on the LM96163 it can be disabled.
A PWM output can be used to control the speed of the fan. The LM63 has two
PWM modes: manual and automatic. Automatic mode is not fully implemented yet
(you cannot define your custom PWM/temperature curve), and mode change isn't
supported either.
-The lm63 driver will not update its values more frequently than every
-second; reading them more often will do no harm, but will return 'old'
-values.
+The lm63 driver will not update its values more frequently than configured with
+the update_interval sysfs attribute; reading them more often will do no harm,
+but will return 'old' values. Values in the automatic fan control lookup table
+(attributes pwm1_auto_*) have their own independent lifetime of 5 seconds.
The LM64 is effectively an LM63 with GPIO lines. The driver does not
support these GPIO lines at present.
+
+The LM96163 is an enhanced version of LM63 with improved temperature accuracy
+and better PWM resolution. For LM96163, the external temperature sensor type is
+configurable as CPU embedded diode(1) or 3904 transistor(2).
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index a4aa8f600e09..1f4dd855a299 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -304,7 +304,7 @@ value (fastest fan speed) wins.
temp[1-*]_type Sensor type selection.
Integers 1 to 6
RW
- 1: PII/Celeron Diode
+ 1: CPU embedded diode
2: 3904 transistor
3: thermal diode
4: thermistor
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index f47cdefb4d1e..ab0a984530d8 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -33,14 +33,15 @@ This document describes the Linux kernel Makefiles.
=== 6 Architecture Makefiles
--- 6.1 Set variables to tweak the build to the architecture
- --- 6.2 Add prerequisites to archprepare:
- --- 6.3 List directories to visit when descending
- --- 6.4 Architecture-specific boot images
- --- 6.5 Building non-kbuild targets
- --- 6.6 Commands useful for building a boot image
- --- 6.7 Custom kbuild commands
- --- 6.8 Preprocessing linker scripts
- --- 6.9 Generic header files
+ --- 6.2 Add prerequisites to archheaders:
+ --- 6.3 Add prerequisites to archprepare:
+ --- 6.4 List directories to visit when descending
+ --- 6.5 Architecture-specific boot images
+ --- 6.6 Building non-kbuild targets
+ --- 6.7 Commands useful for building a boot image
+ --- 6.8 Custom kbuild commands
+ --- 6.9 Preprocessing linker scripts
+ --- 6.10 Generic header files
=== 7 Kbuild syntax for exported headers
--- 7.1 header-y
@@ -252,7 +253,7 @@ more details, with real examples.
This will create a library lib.a based on delay.o. For kbuild to
actually recognize that there is a lib.a being built, the directory
shall be listed in libs-y.
- See also "6.3 List directories to visit when descending".
+ See also "6.4 List directories to visit when descending".
Use of lib-y is normally restricted to lib/ and arch/*/lib.
@@ -974,7 +975,20 @@ When kbuild executes, the following steps are followed (roughly):
$(KBUILD_ARFLAGS) set by the top level Makefile to "D" (deterministic
mode) if this option is supported by $(AR).
---- 6.2 Add prerequisites to archprepare:
+--- 6.2 Add prerequisites to archheaders:
+
+ The archheaders: rule is used to generate header files that
+ may be installed into user space by "make header_install" or
+ "make headers_install_all". In order to support
+ "make headers_install_all", this target has to be able to run
+ on an unconfigured tree, or a tree configured for another
+ architecture.
+
+ It is run before "make archprepare" when run on the
+ architecture itself.
+
+
+--- 6.3 Add prerequisites to archprepare:
The archprepare: rule is used to list prerequisites that need to be
built before starting to descend down in the subdirectories.
@@ -990,7 +1004,7 @@ When kbuild executes, the following steps are followed (roughly):
generating offset header files.
---- 6.3 List directories to visit when descending
+--- 6.4 List directories to visit when descending
An arch Makefile cooperates with the top Makefile to define variables
which specify how to build the vmlinux file. Note that there is no
@@ -1019,7 +1033,7 @@ When kbuild executes, the following steps are followed (roughly):
drivers-$(CONFIG_OPROFILE) += arch/sparc64/oprofile/
---- 6.4 Architecture-specific boot images
+--- 6.5 Architecture-specific boot images
An arch Makefile specifies goals that take the vmlinux file, compress
it, wrap it in bootstrapping code, and copy the resulting files
@@ -1070,7 +1084,7 @@ When kbuild executes, the following steps are followed (roughly):
When "make" is executed without arguments, bzImage will be built.
---- 6.5 Building non-kbuild targets
+--- 6.6 Building non-kbuild targets
extra-y
@@ -1090,7 +1104,7 @@ When kbuild executes, the following steps are followed (roughly):
shall be built, but shall not be linked as part of built-in.o.
---- 6.6 Commands useful for building a boot image
+--- 6.7 Commands useful for building a boot image
Kbuild provides a few macros that are useful when building a
boot image.
@@ -1112,7 +1126,7 @@ When kbuild executes, the following steps are followed (roughly):
always be built.
Assignments to $(targets) are without $(obj)/ prefix.
if_changed may be used in conjunction with custom commands as
- defined in 6.7 "Custom kbuild commands".
+ defined in 6.8 "Custom kbuild commands".
Note: It is a typical mistake to forget the FORCE prerequisite.
Another common pitfall is that whitespace is sometimes
@@ -1171,7 +1185,7 @@ When kbuild executes, the following steps are followed (roughly):
$(obj)/%.dtb: $(src)/%.dts
$(call cmd,dtc)
---- 6.7 Custom kbuild commands
+--- 6.8 Custom kbuild commands
When kbuild is executing with KBUILD_VERBOSE=0, then only a shorthand
of a command is normally displayed.
@@ -1198,7 +1212,7 @@ When kbuild executes, the following steps are followed (roughly):
will be displayed with "make KBUILD_VERBOSE=0".
---- 6.8 Preprocessing linker scripts
+--- 6.9 Preprocessing linker scripts
When the vmlinux image is built, the linker script
arch/$(ARCH)/kernel/vmlinux.lds is used.
@@ -1228,7 +1242,7 @@ When kbuild executes, the following steps are followed (roughly):
The kbuild infrastructure for *lds file are used in several
architecture-specific files.
---- 6.9 Generic header files
+--- 6.10 Generic header files
The directory include/asm-generic contains the header files
that may be shared between individual architectures.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index eb93fd0ec734..b29f3c416296 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2475,6 +2475,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
stacktrace [FTRACE]
Enabled the stack tracer on boot up.
+ stacktrace_filter=[function-list]
+ [FTRACE] Limit the functions that the stack tracer
+ will trace at boot up. function-list is a comma separated
+ list of functions. This list can be changed at run
+ time by the stack_trace_filter file in the debugfs
+ tracing directory. Note, this enables stack tracing
+ and the stacktrace above is not needed.
+
sti= [PARISC,HW]
Format: <num>
Set the STI (builtin display/keyboard on the HP-PARISC
diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt
index 51063e681ca4..b6e39739a36d 100644
--- a/Documentation/kmemleak.txt
+++ b/Documentation/kmemleak.txt
@@ -127,7 +127,10 @@ See the include/linux/kmemleak.h header for the functions prototype.
kmemleak_init - initialize kmemleak
kmemleak_alloc - notify of a memory block allocation
+kmemleak_alloc_percpu - notify of a percpu memory block allocation
kmemleak_free - notify of a memory block freeing
+kmemleak_free_part - notify of a partial memory block freeing
+kmemleak_free_percpu - notify of a percpu memory block freeing
kmemleak_not_leak - mark an object as not a leak
kmemleak_ignore - do not scan or report an object as leak
kmemleak_scan_area - add scan areas inside a memory block
diff --git a/Documentation/mmc/mmc-dev-attrs.txt b/Documentation/mmc/mmc-dev-attrs.txt
index 8898a95b41e5..22ae8441489f 100644
--- a/Documentation/mmc/mmc-dev-attrs.txt
+++ b/Documentation/mmc/mmc-dev-attrs.txt
@@ -64,3 +64,13 @@ Note on Erase Size and Preferred Erase Size:
size specified by the card.
"preferred_erase_size" is in bytes.
+
+SD/MMC/SDIO Clock Gating Attribute
+==================================
+
+Read and write access is provided to following attribute.
+This attribute appears only if CONFIG_MMC_CLKGATE is enabled.
+
+ clkgate_delay Tune the clock gating delay with desired value in milliseconds.
+
+echo <desired delay> > /sys/class/mmc_host/mmcX/clkgate_delay
diff --git a/Documentation/mmc/mmc-dev-parts.txt b/Documentation/mmc/mmc-dev-parts.txt
index 2db28b8e662f..f08d078d43cf 100644
--- a/Documentation/mmc/mmc-dev-parts.txt
+++ b/Documentation/mmc/mmc-dev-parts.txt
@@ -25,3 +25,16 @@ echo 0 > /sys/block/mmcblkXbootY/force_ro
To re-enable read-only access:
echo 1 > /sys/block/mmcblkXbootY/force_ro
+
+The boot partitions can also be locked read only until the next power on,
+with:
+
+echo 1 > /sys/block/mmcblkXbootY/ro_lock_until_next_power_on
+
+This is a feature of the card and not of the kernel. If the card does
+not support boot partition locking, the file will not exist. If the
+feature has been disabled on the card, the file will be read-only.
+
+The boot partitions can also be locked permanently, but this feature is
+not accessible through sysfs in order to avoid accidental or malicious
+bricking.
diff --git a/Documentation/video4linux/CARDLIST.au0828 b/Documentation/video4linux/CARDLIST.au0828
index d5cb4ea287b2..7b59e953c4bf 100644
--- a/Documentation/video4linux/CARDLIST.au0828
+++ b/Documentation/video4linux/CARDLIST.au0828
@@ -1,5 +1,5 @@
0 -> Unknown board (au0828)
- 1 -> Hauppauge HVR950Q (au0828) [2040:7200,2040:7210,2040:7217,2040:721b,2040:721e,2040:721f,2040:7280,0fd9:0008]
+ 1 -> Hauppauge HVR950Q (au0828) [2040:7200,2040:7210,2040:7217,2040:721b,2040:721e,2040:721f,2040:7280,0fd9:0008,2040:7260,2040:7213]
2 -> Hauppauge HVR850 (au0828) [2040:7240]
3 -> DViCO FusionHDTV USB (au0828) [0fe9:d620]
4 -> Hauppauge HVR950Q rev xxF8 (au0828) [2040:7201,2040:7211,2040:7281]
diff --git a/Documentation/video4linux/CARDLIST.bttv b/Documentation/video4linux/CARDLIST.bttv
index 4739d5684305..b753906c7183 100644
--- a/Documentation/video4linux/CARDLIST.bttv
+++ b/Documentation/video4linux/CARDLIST.bttv
@@ -71,7 +71,7 @@
70 -> Prolink Pixelview PV-BT878P+ (Rev.4C,8E)
71 -> Lifeview FlyVideo 98EZ (capture only) LR51 [1851:1851]
72 -> Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM) [1554:4011]
- 73 -> Sensoray 311 [6000:0311]
+ 73 -> Sensoray 311/611 [6000:0311,6000:0611]
74 -> RemoteVision MX (RV605)
75 -> Powercolor MTV878/ MTV878R/ MTV878F
76 -> Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP) [0e11:0079]
@@ -158,3 +158,4 @@
157 -> Geovision GV-800(S) (master) [800a:763d]
158 -> Geovision GV-800(S) (slave) [800b:763d,800c:763d,800d:763d]
159 -> ProVideo PV183 [1830:1540,1831:1540,1832:1540,1833:1540,1834:1540,1835:1540,1836:1540,1837:1540]
+160 -> Tongwei Video Technology TD-3116 [f200:3116]
diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885
index 8910449d23a8..23584d0c6a75 100644
--- a/Documentation/video4linux/CARDLIST.cx23885
+++ b/Documentation/video4linux/CARDLIST.cx23885
@@ -29,3 +29,6 @@
28 -> LEADTEK WinFast PxTV1200 [107d:6f22]
29 -> GoTView X5 3D Hybrid [5654:2390]
30 -> NetUP Dual DVB-T/C-CI RF [1b55:e2e4]
+ 31 -> Leadtek Winfast PxDVR3200 H XC4000 [107d:6f39]
+ 32 -> MPX-885
+ 33 -> Mygica X8507 [14f1:8502]
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index d9c0f119196d..eee18e6962b6 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -85,3 +85,5 @@
84 -> Samsung SMT 7020 DVB-S [18ac:dc00,18ac:dccd]
85 -> Twinhan VP-1027 DVB-S [1822:0023]
86 -> TeVii S464 DVB-S/S2 [d464:9022]
+ 87 -> Leadtek WinFast DTV2000 H PLUS [107d:6f42]
+ 88 -> Leadtek WinFast DTV1800 H (XC4000) [107d:6f38]
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 4a7b3df6d8bd..e7be3ac49ead 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -11,7 +11,7 @@
10 -> Hauppauge WinTV HVR 900 (em2880) [2040:6500]
11 -> Terratec Hybrid XS (em2880)
12 -> Kworld PVR TV 2800 RF (em2820/em2840)
- 13 -> Terratec Prodigy XS (em2880) [0ccd:0047]
+ 13 -> Terratec Prodigy XS (em2880)
14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 (em2820/em2840)
15 -> V-Gear PocketTV (em2800)
16 -> Hauppauge WinTV HVR 950 (em2883) [2040:6513,2040:6517,2040:651b]
@@ -40,7 +40,7 @@
39 -> KWorld PVRTV 300U (em2861) [eb1a:e300]
40 -> Plextor ConvertX PX-TV100U (em2861) [093b:a005]
41 -> Kworld 350 U DVB-T (em2870) [eb1a:e350]
- 42 -> Kworld 355 U DVB-T (em2870) [eb1a:e355,eb1a:e357]
+ 42 -> Kworld 355 U DVB-T (em2870) [eb1a:e355,eb1a:e357,eb1a:e359]
43 -> Terratec Cinergy T XS (em2870) [0ccd:0043]
44 -> Terratec Cinergy T XS (MT2060) (em2870)
45 -> Pinnacle PCTV DVB-T (em2870)
@@ -64,7 +64,7 @@
64 -> Easy Cap Capture DC-60 (em2860)
65 -> IO-DATA GV-MVP/SZ (em2820/em2840) [04bb:0515]
66 -> Empire dual TV (em2880)
- 67 -> Terratec Grabby (em2860) [0ccd:0096]
+ 67 -> Terratec Grabby (em2860) [0ccd:0096,0ccd:10AF]
68 -> Terratec AV350 (em2860) [0ccd:0084]
69 -> KWorld ATSC 315U HDTV TV Box (em2882) [eb1a:a313]
70 -> Evga inDtube (em2882)
@@ -76,3 +76,7 @@
76 -> KWorld PlusTV 340U or UB435-Q (ATSC) (em2870) [1b80:a340]
77 -> EM2874 Leadership ISDBT (em2874)
78 -> PCTV nanoStick T2 290e (em28174)
+ 79 -> Terratec Cinergy H5 (em2884) [0ccd:10a2,0ccd:10ad]
+ 80 -> PCTV DVB-S2 Stick (460e) (em28174)
+ 81 -> Hauppauge WinTV HVR 930C (em2884) [2040:1605]
+ 82 -> Terratec Cinergy HTC Stick (em2884) [0ccd:00b2]
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 7efae9bd73ed..e7ef38a19859 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -186,3 +186,4 @@
185 -> MagicPro ProHDTV Pro2 DMB-TH/Hybrid [17de:d136]
186 -> Beholder BeholdTV 501 [5ace:5010]
187 -> Beholder BeholdTV 503 FM [5ace:5030]
+188 -> Sensoray 811/911 [6000:0811,6000:0911]
diff --git a/Documentation/video4linux/CARDLIST.saa7164 b/Documentation/video4linux/CARDLIST.saa7164
index 152bd7b781ca..2205e8d55537 100644
--- a/Documentation/video4linux/CARDLIST.saa7164
+++ b/Documentation/video4linux/CARDLIST.saa7164
@@ -7,3 +7,5 @@
6 -> Hauppauge WinTV-HVR2200 [0070:8901]
7 -> Hauppauge WinTV-HVR2250 [0070:8891,0070:8851]
8 -> Hauppauge WinTV-HVR2250 [0070:88A1]
+ 9 -> Hauppauge WinTV-HVR2200 [0070:8940]
+ 10 -> Hauppauge WinTV-HVR2200 [0070:8953]
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index b15e29f31121..f2060f0dc02c 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -189,6 +189,7 @@ ov519 05a9:0511 Video Blaster WebCam 3/WebCam Plus, D-Link USB Digital Video Ca
ov519 05a9:0518 Creative WebCam
ov519 05a9:0519 OV519 Microphone
ov519 05a9:0530 OmniVision
+ov534_9 05a9:1550 OmniVision VEHO Filmscanner
ov519 05a9:2800 OmniVision SuperCAM
ov519 05a9:4519 Webcam Classic
ov534_9 05a9:8065 OmniVision test kit ov538+ov9712
@@ -278,6 +279,7 @@ pac7302 093a:2628 Genius iLook 300
pac7302 093a:2629 Genious iSlim 300
pac7302 093a:262a Webcam 300k
pac7302 093a:262c Philips SPC 230 NC
+jl2005bcd 0979:0227 Various brands, 19 known cameras supported
jeilinj 0979:0280 Sakar 57379
jeilinj 0979:0280 Sportscam DV15
zc3xx 0ac8:0302 Z-star Vimicro zc0302
diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index f8dcabf7852c..659b2ba12a4f 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -612,6 +612,12 @@ You can set a pointer to a mutex_lock in struct video_device. Usually this
will be either a top-level mutex or a mutex per device node. If you want
finer-grained locking then you have to set it to NULL and do you own locking.
+It is up to the driver developer to decide which method to use. However, if
+your driver has high-latency operations (for example, changing the exposure
+of a USB webcam might take a long time), then you might be better off with
+doing your own locking if you want to allow the user to do other things with
+the device while waiting for the high-latency command to finish.
+
If a lock is specified then all file operations will be serialized on that
lock. If you use videobuf then you must pass the same lock to the videobuf
queue initialize function: if videobuf has to wait for a frame to arrive, then
@@ -619,6 +625,11 @@ it will temporarily unlock the lock and relock it afterwards. If your driver
also waits in the code, then you should do the same to allow other processes
to access the device node while the first process is waiting for something.
+In the case of videobuf2 you will need to implement the wait_prepare and
+wait_finish callbacks to unlock/lock if applicable. In particular, if you use
+the lock in struct video_device then you must unlock/lock this mutex in
+wait_prepare and wait_finish.
+
The implementation of a hotplug disconnect should also take the lock before
calling v4l2_device_disconnect.