summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/input/pxa27x-keypad.txt60
-rw-r--r--Documentation/devicetree/bindings/input/samsung-keypad.txt24
-rw-r--r--Documentation/devicetree/bindings/input/ti,nspire-keypad.txt60
-rw-r--r--Documentation/devicetree/bindings/serio/olpc,ap-sp.txt13
-rw-r--r--Documentation/input/multi-touch-protocol.txt2
5 files changed, 140 insertions, 19 deletions
diff --git a/Documentation/devicetree/bindings/input/pxa27x-keypad.txt b/Documentation/devicetree/bindings/input/pxa27x-keypad.txt
new file mode 100644
index 000000000000..f8674f7e5ea5
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pxa27x-keypad.txt
@@ -0,0 +1,60 @@
+* Marvell PXA Keypad controller
+
+Required Properties
+- compatible : should be "marvell,pxa27x-keypad"
+- reg : Address and length of the register set for the device
+- interrupts : The interrupt for the keypad controller
+- marvell,debounce-interval : How long time the key will be
+ recognized when it is pressed. It is a u32 value, and bit[31:16]
+ is debounce interval for direct key and bit[15:0] is debounce
+ interval for matrix key. The value is in binary number of 2ms
+
+Optional Properties For Matrix Keyes
+Please refer to matrix-keymap.txt
+
+Optional Properties for Direct Keyes
+- marvell,direct-key-count : How many direct keyes are used.
+- marvell,direct-key-mask : The mask indicates which keyes
+ are used. If bit[X] of the mask is set, the direct key X
+ is used.
+- marvell,direct-key-low-active : Direct key status register
+ tells the level of pins that connects to the direct keyes.
+ When this property is set, it means that when the pin level
+ is low, the key is pressed(active).
+- marvell,direct-key-map : It is a u16 array. Each item indicates
+ the linux key-code for the direct key.
+
+Optional Properties For Rotary
+- marvell,rotary0 : It is a u32 value. Bit[31:16] is the
+ linux key-code for rotary up. Bit[15:0] is the linux key-code
+ for rotary down. It is for rotary 0.
+- marvell,rotary1 : Same as marvell,rotary0. It is for rotary 1.
+- marvell,rotary-rel-key : When rotary is used for relative axes
+ in the device, the value indicates the key-code for relative
+ axes measurement in the device. It is a u32 value. Bit[31:16]
+ is for rotary 1, and Bit[15:0] is for rotary 0.
+
+Examples:
+ keypad: keypad@d4012000 {
+ keypad,num-rows = <3>;
+ keypad,num-columns = <5>;
+ linux,keymap = <0x0000000e /* KEY_BACKSPACE */
+ 0x0001006b /* KEY_END */
+ 0x00020061 /* KEY_RIGHTCTRL */
+ 0x0003000b /* KEY_0 */
+ 0x00040002 /* KEY_1 */
+ 0x0100008b /* KEY_MENU */
+ 0x01010066 /* KEY_HOME */
+ 0x010200e7 /* KEY_SEND */
+ 0x01030009 /* KEY_8 */
+ 0x0104000a /* KEY_9 */
+ 0x02000160 /* KEY_OK */
+ 0x02010003 /* KEY_2 */
+ 0x02020004 /* KEY_3 */
+ 0x02030005 /* KEY_4 */
+ 0x02040006>; /* KEY_5 */
+ marvell,rotary0 = <0x006c0067>; /* KEY_UP & KEY_DOWN */
+ marvell,direct-key-count = <1>;
+ marvell,direct-key-map = <0x001c>;
+ marvell,debounce-interval = <0x001e001e>;
+ };
diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt
index ce3e394c0e64..942d071baaa5 100644
--- a/Documentation/devicetree/bindings/input/samsung-keypad.txt
+++ b/Documentation/devicetree/bindings/input/samsung-keypad.txt
@@ -25,14 +25,6 @@ Required Board Specific Properties:
- samsung,keypad-num-columns: Number of column lines connected to the
keypad controller.
-- row-gpios: List of gpios used as row lines. The gpio specifier for
- this property depends on the gpio controller to which these row lines
- are connected.
-
-- col-gpios: List of gpios used as column lines. The gpio specifier for
- this property depends on the gpio controller to which these column
- lines are connected.
-
- Keys represented as child nodes: Each key connected to the keypad
controller is represented as a child node to the keypad controller
device node and should include the following properties.
@@ -41,6 +33,9 @@ Required Board Specific Properties:
- linux,code: the key-code to be reported when the key is pressed
and released.
+- pinctrl-0: Should specify pin control groups used for this controller.
+- pinctrl-names: Should contain only one value - "default".
+
Optional Properties specific to linux:
- linux,keypad-no-autorepeat: do no enable autorepeat feature.
- linux,keypad-wakeup: use any event on keypad as wakeup event.
@@ -56,17 +51,8 @@ Example:
linux,input-no-autorepeat;
linux,input-wakeup;
- row-gpios = <&gpx2 0 3 3 0
- &gpx2 1 3 3 0>;
-
- col-gpios = <&gpx1 0 3 0 0
- &gpx1 1 3 0 0
- &gpx1 2 3 0 0
- &gpx1 3 3 0 0
- &gpx1 4 3 0 0
- &gpx1 5 3 0 0
- &gpx1 6 3 0 0
- &gpx1 7 3 0 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&keypad_rows &keypad_columns>;
key_1 {
keypad,row = <0>;
diff --git a/Documentation/devicetree/bindings/input/ti,nspire-keypad.txt b/Documentation/devicetree/bindings/input/ti,nspire-keypad.txt
new file mode 100644
index 000000000000..513d94d6e899
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,nspire-keypad.txt
@@ -0,0 +1,60 @@
+TI-NSPIRE Keypad
+
+Required properties:
+- compatible: Compatible property value should be "ti,nspire-keypad".
+
+- reg: Physical base address of the peripheral and length of memory mapped
+ region.
+
+- interrupts: The interrupt number for the peripheral.
+
+- scan-interval: How often to scan in us. Based on a APB speed of 33MHz, the
+ maximum and minimum delay time is ~2000us and ~500us respectively
+
+- row-delay: How long to wait before scanning each row.
+
+- clocks: The clock this peripheral is attached to.
+
+- linux,keymap: The keymap to use
+ (see Documentation/devicetree/bindings/input/matrix-keymap.txt)
+
+Optional properties:
+- active-low: Specify that the keypad is active low (i.e. logical low signifies
+ a key press).
+
+Example:
+
+input {
+ compatible = "ti,nspire-keypad";
+ reg = <0x900E0000 0x1000>;
+ interrupts = <16>;
+
+ scan-interval = <1000>;
+ row-delay = <200>;
+
+ clocks = <&apb_pclk>;
+
+ linux,keymap = <
+ 0x0000001c 0x0001001c 0x00040039
+ 0x0005002c 0x00060015 0x0007000b
+ 0x0008000f 0x0100002d 0x01010011
+ 0x0102002f 0x01030004 0x01040016
+ 0x01050014 0x0106001f 0x01070002
+ 0x010a006a 0x02000013 0x02010010
+ 0x02020019 0x02030007 0x02040018
+ 0x02050031 0x02060032 0x02070005
+ 0x02080028 0x0209006c 0x03000026
+ 0x03010025 0x03020024 0x0303000a
+ 0x03040017 0x03050023 0x03060022
+ 0x03070008 0x03080035 0x03090069
+ 0x04000021 0x04010012 0x04020020
+ 0x0404002e 0x04050030 0x0406001e
+ 0x0407000d 0x04080037 0x04090067
+ 0x05010038 0x0502000c 0x0503001b
+ 0x05040034 0x0505001a 0x05060006
+ 0x05080027 0x0509000e 0x050a006f
+ 0x0600002b 0x0602004e 0x06030068
+ 0x06040003 0x0605006d 0x06060009
+ 0x06070001 0x0609000f 0x0708002a
+ 0x0709001d 0x070a0033 >;
+};
diff --git a/Documentation/devicetree/bindings/serio/olpc,ap-sp.txt b/Documentation/devicetree/bindings/serio/olpc,ap-sp.txt
new file mode 100644
index 000000000000..0e72183f52bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/serio/olpc,ap-sp.txt
@@ -0,0 +1,13 @@
+OLPC AP-SP serio interface
+
+Required properties:
+- compatible : "olpc,ap-sp"
+- reg : base address and length of SoC's WTM registers
+- interrupts : SP-AP interrupt
+
+Example:
+ ap-sp@d4290000 {
+ compatible = "olpc,ap-sp";
+ reg = <0xd4290000 0x1000>;
+ interrupts = <40>;
+ }
diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
index 2c179613f81b..de139b18184a 100644
--- a/Documentation/input/multi-touch-protocol.txt
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -80,6 +80,8 @@ Userspace can detect that a driver can report more total contacts than slots
by noting that the largest supported BTN_TOOL_*TAP event is larger than the
total number of type B slots reported in the absinfo for the ABS_MT_SLOT axis.
+The minimum value of the ABS_MT_SLOT axis must be 0.
+
Protocol Example A
------------------