diff options
Diffstat (limited to 'Documentation')
16 files changed, 69 insertions, 11 deletions
diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README index 1fe2d7fd4108..5e38e1582f95 100644 --- a/Documentation/arm/sunxi/README +++ b/Documentation/arm/sunxi/README @@ -36,7 +36,7 @@ SunXi family + User Manual http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf - - Allwinner A23 + - Allwinner A23 (sun8i) + Datasheet http://dl.linux-sunxi.org/A23/A23%20Datasheet%20V1.0%2020130830.pdf + User Manual @@ -55,7 +55,23 @@ SunXi family + User Manual http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20User%20Manual%20%20V1.0%2020130322.pdf + - Allwinner A33 (sun8i) + + Datasheet + http://dl.linux-sunxi.org/A33/A33%20Datasheet%20release%201.1.pdf + + User Manual + http://dl.linux-sunxi.org/A33/A33%20user%20manual%20release%201.1.pdf + + - Allwinner H3 (sun8i) + + Datasheet + http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf + * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs - Allwinner A80 + Datasheet http://dl.linux-sunxi.org/A80/A80_Datasheet_Revision_1.0_0404.pdf + + * Octa ARM Cortex-A7 based SoCs + - Allwinner A83T + + Not Supported + + Datasheet + http://dl.linux-sunxi.org/A83T/A83T_datasheet_Revision_1.1.pdf diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt index 424ac8cbfa08..dc2d0f06d058 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -50,6 +50,7 @@ System Timer (ST) required properties: - reg: Should contain registers location and length - interrupts: Should contain interrupt for the ST which is the IRQ line shared across all System Controller members. +- clocks: phandle to input clock. Its subnodes can be: - watchdog: compatible should be "atmel,at91rm9200-wdt" @@ -61,7 +62,7 @@ TC/TCLIB Timer required properties: Note that you can specify several interrupt cells if the TC block has one interrupt per channel. - clock-names: tuple listing input clock names. - Required elements: "t0_clk" + Required elements: "t0_clk", "slow_clk" Optional elements: "t1_clk", "t2_clk" - clocks: phandles to input clocks. @@ -89,12 +90,14 @@ RSTC Reset Controller required properties: - compatible: Should be "atmel,<chip>-rstc". <chip> can be "at91sam9260" or "at91sam9g45" - reg: Should contain registers location and length +- clocks: phandle to input clock. Example: rstc@fffffd00 { compatible = "atmel,at91sam9260-rstc"; reg = <0xfffffd00 0x10>; + clocks = <&clk32k>; }; RAMC SDRAM/DDR Controller required properties: @@ -117,6 +120,7 @@ required properties: - compatible: Should be "atmel,<chip>-shdwc". <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5". - reg: Should contain registers location and length +- clocks: phandle to input clock. optional properties: - atmel,wakeup-mode: String, operation mode of the wakeup mode. @@ -135,9 +139,10 @@ optional at91sam9x5 properties: Example: - rstc@fffffd00 { - compatible = "atmel,at91sam9260-rstc"; - reg = <0xfffffd00 0x10>; + shdwc@fffffd10 { + compatible = "atmel,at91sam9260-shdwc"; + reg = <0xfffffd10 0x10>; + clocks = <&clk32k>; }; Special Function Registers (SFR) diff --git a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt index 4f40ff3fee4b..5171ad8f48ff 100644 --- a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt +++ b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt @@ -20,6 +20,8 @@ And in addition, the compatible shall be extended with the specific board. Currently known boards are: "buffalo,lschlv2" +"buffalo,lswvl" +"buffalo,lswxl" "buffalo,lsxhl" "buffalo,lsxl" "dlink,dns-320" diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt index dd7550a29db6..2daa424a13a4 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.txt +++ b/Documentation/devicetree/bindings/arm/mediatek.txt @@ -5,6 +5,7 @@ Boards with a MediaTek mt65xx/mt81xx SoC shall have the following property: Required root node property: compatible: Must contain one of + "mediatek,mt6580" "mediatek,mt6589" "mediatek,mt6592" "mediatek,mt8127" @@ -14,6 +15,9 @@ compatible: Must contain one of Supported boards: +- Evaluation board for MT6580: + Required root node properties: + - compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580"; - bq Aquaris5 smart phone: Required root node properties: - compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589"; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt index 4f5a5352ccd8..3c9c3a7f3d25 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt @@ -11,6 +11,7 @@ Required properties: "mediatek,mt6592-sysirq" "mediatek,mt6589-sysirq" "mediatek,mt6582-sysirq" + "mediatek,mt6580-sysirq" "mediatek,mt6577-sysirq" - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Use the same format as specified by GIC in diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 4f6a82cef1d1..9f4e5136e568 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -135,6 +135,9 @@ Boards: - AM335X OrionLXm : Substation Automation Platform compatible = "novatech,am335x-lxm", "ti,am33xx" +- AM335X phyBOARD-WEGA: Single Board Computer dev kit + compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx" + - OMAP5 EVM : Evaluation Module compatible = "ti,omap5-evm", "ti,omap5" diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt index 42941fdefb11..67da20539540 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.txt +++ b/Documentation/devicetree/bindings/arm/sunxi.txt @@ -9,4 +9,6 @@ using one of the following compatible strings: allwinner,sun6i-a31 allwinner,sun7i-a20 allwinner,sun8i-a23 + allwinner,sun8i-a33 + allwinner,sun8i-h3 allwinner,sun9i-a80 diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt index efb51cf0c845..d8b168ebd5f1 100644 --- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt @@ -21,8 +21,8 @@ Required properties: "st,stih416-plls-c32-ddr", "st,clkgen-plls-c32" "st,stih407-plls-c32-a0", "st,clkgen-plls-c32" "st,stih407-plls-c32-a9", "st,clkgen-plls-c32" - "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32" - "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32" + "sst,plls-c32-cx_0", "st,clkgen-plls-c32" + "sst,plls-c32-cx_1", "st,clkgen-plls-c32" "st,stih415-gpu-pll-c32", "st,clkgengpu-pll-c32" "st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32" diff --git a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt index f9c6454146b6..a43d26d41e04 100644 --- a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt +++ b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt @@ -1,5 +1,9 @@ Binding for Synopsys IntelliDDR Multi Protocol Memory Controller +This controller has an optional ECC support in half-bus width (16-bit) +configuration. The ECC controller corrects one bit error and detects +two bit errors. + Required properties: - compatible: Should be 'xlnx,zynq-ddrc-a05' - reg: Base address and size of the controllers memory area diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt index 938f8e1ba205..0db60470ebb6 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt +++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt @@ -8,6 +8,7 @@ of the EMIF IP and memory parts attached to it. Required properties: - compatible : Should be of the form "ti,emif-<ip-rev>" where <ip-rev> is the IP revision of the specific EMIF instance. + For am437x should be ti,emif-am4372. - phy-type : <u32> indicating the DDR phy type. Following are the allowed values diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt index 34c1505774bf..5d3791e789c6 100644 --- a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt @@ -5,6 +5,7 @@ Required properties: - reg: physical base address of the controller and length of memory mapped region. - interrupts: rtc alarm/event interrupt +- clocks: phandle to input clock. Example: @@ -12,4 +13,5 @@ rtc@fffffe00 { compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffe00 0x100>; interrupts = <1 4 7>; + clocks = <&clk32k>; }; diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt index 8d63f1da07aa..a875997f2062 100644 --- a/Documentation/devicetree/bindings/serial/mtk-uart.txt +++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt @@ -7,8 +7,9 @@ Required properties: * "mediatek,mt8173-uart" for MT8173 compatible UARTS * "mediatek,mt6589-uart" for MT6589 compatible UARTS * "mediatek,mt6582-uart" for MT6582 compatible UARTS + * "mediatek,mt6580-uart" for MT6580 compatible UARTS * "mediatek,mt6577-uart" for all compatible UARTS (MT8173, MT6589, MT6582, - MT6577) + MT6580, MT6577) - reg: The base address of the UART register bank. diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt index 7c4408ff4b83..53a3029b7589 100644 --- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt +++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt @@ -2,7 +2,11 @@ Mediatek MT6577, MT6572 and MT6589 Timers --------------------------------------- Required properties: -- compatible: Should be "mediatek,mt6577-timer" +- compatible should contain: + * "mediatek,mt6589-timer" for MT6589 compatible timers + * "mediatek,mt6580-timer" for MT6580 compatible timers + * "mediatek,mt6577-timer" for all compatible timers (MT6589, MT6580, + MT6577) - reg: Should contain location and length for timers register. - clocks: Clocks driving the timer hardware. This list should include two clocks. The order is system clock and as second clock the RTC clock. diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 576f4ac7fb1a..d3fbd1f30eb4 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -46,6 +46,7 @@ chipone ChipOne chipspark ChipSPARK chrp Common Hardware Reference Platform chunghwa Chunghwa Picture Tubes Ltd. +ciaa Computadora Industrial Abierta Argentina cirrus Cirrus Logic, Inc. cloudengines Cloud Engines, Inc. cnm Chips&Media, Inc. @@ -135,6 +136,7 @@ mitsubishi Mitsubishi Electric Corporation mosaixtech Mosaix Technologies, Inc. moxa Moxa mpl MPL AG +msi Micro-Star International Co. Ltd. mti Imagination Technologies Ltd. (formerly MIPS Technologies Inc.) mundoreader Mundo Reader S.L. murata Murata Manufacturing Co., Ltd. diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt index a4d869744f59..86fa6de1019b 100644 --- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt @@ -6,6 +6,7 @@ Required properties: - compatible: must be "atmel,at91sam9260-wdt". - reg: physical base address of the controller and length of memory mapped region. +- clocks: phandle to input clock. Optional properties: - timeout-sec: contains the watchdog timeout in seconds. @@ -39,6 +40,7 @@ Example: compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffd40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; timeout-sec = <15>; atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt index f732a8321e8a..8cc17ca71813 100644 --- a/Documentation/power/swsusp.txt +++ b/Documentation/power/swsusp.txt @@ -410,8 +410,17 @@ Documentation/usb/persist.txt. Q: Can I suspend-to-disk using a swap partition under LVM? -A: No. You can suspend successfully, but you'll not be able to -resume. uswsusp should be able to work with LVM. See suspend.sf.net. +A: Yes and No. You can suspend successfully, but the kernel will not be able +to resume on its own. You need an initramfs that can recognize the resume +situation, activate the logical volume containing the swap volume (but not +touch any filesystems!), and eventually call + +echo -n "$major:$minor" > /sys/power/resume + +where $major and $minor are the respective major and minor device numbers of +the swap volume. + +uswsusp works with LVM, too. See http://suspend.sourceforge.net/ Q: I upgraded the kernel from 2.6.15 to 2.6.16. Both kernels were compiled with the similar configuration files. Anyway I found that |