diff options
Diffstat (limited to 'Documentation')
76 files changed, 1848 insertions, 293 deletions
diff --git a/Documentation/ABI/stable/sysfs-bus-vmbus b/Documentation/ABI/stable/sysfs-bus-vmbus new file mode 100644 index 000000000000..636e938d5e33 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-bus-vmbus @@ -0,0 +1,29 @@ +What: /sys/bus/vmbus/devices/vmbus_*/id +Date: Jul 2009 +KernelVersion: 2.6.31 +Contact: K. Y. Srinivasan <kys@microsoft.com> +Description: The VMBus child_relid of the device's primary channel +Users: tools/hv/lsvmbus + +What: /sys/bus/vmbus/devices/vmbus_*/class_id +Date: Jul 2009 +KernelVersion: 2.6.31 +Contact: K. Y. Srinivasan <kys@microsoft.com> +Description: The VMBus interface type GUID of the device +Users: tools/hv/lsvmbus + +What: /sys/bus/vmbus/devices/vmbus_*/device_id +Date: Jul 2009 +KernelVersion: 2.6.31 +Contact: K. Y. Srinivasan <kys@microsoft.com> +Description: The VMBus interface instance GUID of the device +Users: tools/hv/lsvmbus + +What: /sys/bus/vmbus/devices/vmbus_*/channel_vp_mapping +Date: Jul 2015 +KernelVersion: 4.2.0 +Contact: K. Y. Srinivasan <kys@microsoft.com> +Description: The mapping of which primary/sub channels are bound to which + Virtual Processors. + Format: <channel's child_relid:the bound cpu's number> +Users: tools/hv/lsvmbus diff --git a/Documentation/ABI/testing/configfs-usb-gadget-loopback b/Documentation/ABI/testing/configfs-usb-gadget-loopback index 9aae5bfb9908..06beefbcf061 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-loopback +++ b/Documentation/ABI/testing/configfs-usb-gadget-loopback @@ -5,4 +5,4 @@ Description: The attributes: qlen - depth of loopback queue - bulk_buflen - buffer length + buflen - buffer length diff --git a/Documentation/ABI/testing/configfs-usb-gadget-sourcesink b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink index 29477c319f61..bc7ff731aa0c 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-sourcesink +++ b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink @@ -9,4 +9,4 @@ Description: isoc_maxpacket - 0 - 1023 (fs), 0 - 1024 (hs/ss) isoc_mult - 0..2 (hs/ss only) isoc_maxburst - 0..15 (ss only) - qlen - buffer length + buflen - buffer length diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x index b4d0b99afffb..d72ca1736ba4 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x @@ -112,7 +112,7 @@ KernelVersion: 3.19 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> Description: (RW) Mask to apply to all the context ID comparator. -What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/ctxid_val +What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/ctxid_pid Date: November 2014 KernelVersion: 3.19 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x index 2fe2e3dae487..2355ed8ae31f 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x @@ -249,7 +249,7 @@ KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> Description: (RW) Select which context ID comparator to work with. -What: /sys/bus/coresight/devices/<memory_map>.etm/ctxid_val +What: /sys/bus/coresight/devices/<memory_map>.etm/ctxid_pid Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index bbed111c31b4..42d360fe66a5 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -413,6 +413,11 @@ Description: to compute the calories burnt by the user. What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale_available +What: /sys/.../iio:deviceX/in_anglvel_scale_available +What: /sys/.../iio:deviceX/in_magn_scale_available +What: /sys/.../iio:deviceX/in_illuminance_scale_available +What: /sys/.../iio:deviceX/in_intensity_scale_available +What: /sys/.../iio:deviceX/in_proximity_scale_available What: /sys/.../iio:deviceX/in_voltageX_scale_available What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available What: /sys/.../iio:deviceX/out_voltageX_scale_available @@ -488,7 +493,7 @@ Contact: linux-iio@vger.kernel.org Description: Specifies the output powerdown mode. DAC output stage is disconnected from the amplifier and - 1kohm_to_gnd: connected to ground via an 1kOhm resistor, + 1kohm_to_gnd: connected to ground via an 1kOhm resistor, 6kohm_to_gnd: connected to ground via a 6kOhm resistor, 20kohm_to_gnd: connected to ground via a 20kOhm resistor, 100kohm_to_gnd: connected to ground via an 100kOhm resistor, @@ -498,9 +503,9 @@ Description: outX_powerdown_mode_available. If Y is not present the mode is shared across all outputs. -What: /sys/.../iio:deviceX/out_votlageY_powerdown_mode_available +What: /sys/.../iio:deviceX/out_voltageY_powerdown_mode_available What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available -What: /sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available +What: /sys/.../iio:deviceX/out_altvoltageY_powerdown_mode_available What: /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org @@ -1035,13 +1040,6 @@ Contact: linux-iio@vger.kernel.org Description: Number of scans contained by the buffer. -What: /sys/bus/iio/devices/iio:deviceX/buffer/bytes_per_datum -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - Bytes per scan. Due to alignment fun, the scan may be larger - than implied directly by the scan_element parameters. - What: /sys/bus/iio/devices/iio:deviceX/buffer/enable KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org @@ -1234,10 +1232,8 @@ Description: object is near the sensor, usually be observing reflectivity of infrared or ultrasound emitted. Often these sensors are unit less and as such conversion - to SI units is not possible. Where it is, the units should - be meters. If such a conversion is not possible, the reported - values should behave in the same way as a distance, i.e. lower - values indicate something is closer to the sensor. + to SI units is not possible. Higher proximity measurements + indicate closer objects, and vice versa. What: /sys/.../iio:deviceX/in_illuminance_input What: /sys/.../iio:deviceX/in_illuminance_raw diff --git a/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs b/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs index 5235e6c749ab..bbb039237a25 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs +++ b/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs @@ -9,3 +9,12 @@ Description: automated testing or in situations, where other trigger methods are not applicable. For example no RTC or spare GPIOs. X is the IIO index of the trigger. + +What: /sys/bus/iio/devices/triggerX/name +KernelVersion: 2.6.39 +Contact: linux-iio@vger.kernel.org +Description: + The name attribute holds a description string for the current + trigger. In order to associate the trigger with an IIO device + one should write this name string to + /sys/bus/iio/devices/iio:deviceY/trigger/current_trigger. diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index e5cc7633d013..864637f25bee 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -114,6 +114,20 @@ Description: enabled for the device. Developer can write y/Y/1 or n/N/0 to the file to enable/disable the feature. +What: /sys/bus/usb/devices/.../power/usb3_hardware_lpm +Date: June 2015 +Contact: Kevin Strasser <kevin.strasser@linux.intel.com> +Description: + If CONFIG_PM is set and a USB 3.0 lpm-capable device is plugged + in to a xHCI host which supports link PM, it will check if U1 + and U2 exit latencies have been set in the BOS descriptor; if + the check is is passed and the host supports USB3 hardware LPM, + USB3 hardware LPM will be enabled for the device and the USB + device directory will contain a file named + power/usb3_hardware_lpm. The file holds a string value (enable + or disable) indicating whether or not USB3 hardware LPM is + enabled for the device. + What: /sys/bus/usb/devices/.../removable Date: February 2012 Contact: Matthew Garrett <mjg@redhat.com> diff --git a/Documentation/ABI/testing/sysfs-class-power-twl4030 b/Documentation/ABI/testing/sysfs-class-power-twl4030 new file mode 100644 index 000000000000..be26af0f1895 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-power-twl4030 @@ -0,0 +1,45 @@ +What: /sys/class/power_supply/twl4030_ac/max_current + /sys/class/power_supply/twl4030_usb/max_current +Description: + Read/Write limit on current which may + be drawn from the ac (Accessory Charger) or + USB port. + + Value is in micro-Amps. + + Value is set automatically to an appropriate + value when a cable is plugged or unplugged. + + Value can the set by writing to the attribute. + The change will only persist until the next + plug event. These event are reported via udev. + + +What: /sys/class/power_supply/twl4030_usb/mode +Description: + Changing mode for USB port. + Writing to this can disable charging. + + Possible values are: + "auto" - draw power as appropriate for detected + power source and battery status. + "off" - do not draw any power. + "continuous" + - activate mode described as "linear" in + TWL data sheets. This uses whatever + current is available and doesn't switch off + when voltage drops. + + This is useful for unstable power sources + such as bicycle dynamo, but care should + be taken that battery is not over-charged. + +What: /sys/class/power_supply/twl4030_ac/mode +Description: + Changing mode for 'ac' port. + Writing to this can disable charging. + + Possible values are: + "auto" - draw power as appropriate for detected + power source and battery status. + "off" - do not draw any power. diff --git a/Documentation/ABI/testing/sysfs-driver-sunxi-sid b/Documentation/ABI/testing/sysfs-driver-sunxi-sid deleted file mode 100644 index ffb9536f6ecc..000000000000 --- a/Documentation/ABI/testing/sysfs-driver-sunxi-sid +++ /dev/null @@ -1,22 +0,0 @@ -What: /sys/devices/*/<our-device>/eeprom -Date: August 2013 -Contact: Oliver Schinagl <oliver@schinagl.nl> -Description: read-only access to the SID (Security-ID) on current - A-series SoC's from Allwinner. Currently supports A10, A10s, A13 - and A20 CPU's. The earlier A1x series of SoCs exports 16 bytes, - whereas the newer A20 SoC exposes 512 bytes split into sections. - Besides the 16 bytes of SID, there's also an SJTAG area, - HDMI-HDCP key and some custom keys. Below a quick overview, for - details see the user manual: - 0x000 128 bit root-key (sun[457]i) - 0x010 128 bit boot-key (sun7i) - 0x020 64 bit security-jtag-key (sun7i) - 0x028 16 bit key configuration (sun7i) - 0x02b 16 bit custom-vendor-key (sun7i) - 0x02c 320 bit low general key (sun7i) - 0x040 32 bit read-control access (sun7i) - 0x064 224 bit low general key (sun7i) - 0x080 2304 bit HDCP-key (sun7i) - 0x1a0 768 bit high general key (sun7i) -Users: any user space application which wants to read the SID on - Allwinner's A-series of CPU's. diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index b1d6c951ea29..93eff64387cd 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -15,7 +15,7 @@ DOCBOOKS := z8530book.xml device-drivers.xml \ 80211.xml debugobjects.xml sh.xml regulator.xml \ alsa-driver-api.xml writing-an-alsa-driver.xml \ tracepoint.xml drm.xml media_api.xml w1.xml \ - writing_musb_glue_layer.xml crypto-API.xml + writing_musb_glue_layer.xml crypto-API.xml iio.xml include Documentation/DocBook/media/Makefile diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index c0312cbd023d..2fb9a5457522 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -3383,7 +3383,7 @@ void intel_crt_init(struct drm_device *dev) <td valign="top" >TBD</td> </tr> <tr> - <td rowspan="2" valign="top" >omap</td> + <td valign="top" >omap</td> <td valign="top" >Generic</td> <td valign="top" >“zorder”</td> <td valign="top" >RANGE</td> diff --git a/Documentation/DocBook/iio.tmpl b/Documentation/DocBook/iio.tmpl new file mode 100644 index 000000000000..06bb53de5a47 --- /dev/null +++ b/Documentation/DocBook/iio.tmpl @@ -0,0 +1,697 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN" + "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []> + +<book id="iioid"> + <bookinfo> + <title>Industrial I/O driver developer's guide </title> + + <authorgroup> + <author> + <firstname>Daniel</firstname> + <surname>Baluta</surname> + <affiliation> + <address> + <email>daniel.baluta@intel.com</email> + </address> + </affiliation> + </author> + </authorgroup> + + <copyright> + <year>2015</year> + <holder>Intel Corporation</holder> + </copyright> + + <legalnotice> + <para> + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License version 2. + </para> + </legalnotice> + </bookinfo> + + <toc></toc> + + <chapter id="intro"> + <title>Introduction</title> + <para> + The main purpose of the Industrial I/O subsystem (IIO) is to provide + support for devices that in some sense perform either analog-to-digital + conversion (ADC) or digital-to-analog conversion (DAC) or both. The aim + is to fill the gap between the somewhat similar hwmon and input + subsystems. + Hwmon is directed at low sample rate sensors used to monitor and + control the system itself, like fan speed control or temperature + measurement. Input is, as its name suggests, focused on human interaction + input devices (keyboard, mouse, touchscreen). In some cases there is + considerable overlap between these and IIO. + </para> + <para> + Devices that fall into this category include: + <itemizedlist> + <listitem> + analog to digital converters (ADCs) + </listitem> + <listitem> + accelerometers + </listitem> + <listitem> + capacitance to digital converters (CDCs) + </listitem> + <listitem> + digital to analog converters (DACs) + </listitem> + <listitem> + gyroscopes + </listitem> + <listitem> + inertial measurement units (IMUs) + </listitem> + <listitem> + color and light sensors + </listitem> + <listitem> + magnetometers + </listitem> + <listitem> + pressure sensors + </listitem> + <listitem> + proximity sensors + </listitem> + <listitem> + temperature sensors + </listitem> + </itemizedlist> + Usually these sensors are connected via SPI or I2C. A common use case of the + sensors devices is to have combined functionality (e.g. light plus proximity + sensor). + </para> + </chapter> + <chapter id='iiosubsys'> + <title>Industrial I/O core</title> + <para> + The Industrial I/O core offers: + <itemizedlist> + <listitem> + a unified framework for writing drivers for many different types of + embedded sensors. + </listitem> + <listitem> + a standard interface to user space applications manipulating sensors. + </listitem> + </itemizedlist> + The implementation can be found under <filename> + drivers/iio/industrialio-*</filename> + </para> + <sect1 id="iiodevice"> + <title> Industrial I/O devices </title> + +!Finclude/linux/iio/iio.h iio_dev +!Fdrivers/iio/industrialio-core.c iio_device_alloc +!Fdrivers/iio/industrialio-core.c iio_device_free +!Fdrivers/iio/industrialio-core.c iio_device_register +!Fdrivers/iio/industrialio-core.c iio_device_unregister + + <para> + An IIO device usually corresponds to a single hardware sensor and it + provides all the information needed by a driver handling a device. + Let's first have a look at the functionality embedded in an IIO + device then we will show how a device driver makes use of an IIO + device. + </para> + <para> + There are two ways for a user space application to interact + with an IIO driver. + <itemizedlist> + <listitem> + <filename>/sys/bus/iio/iio:deviceX/</filename>, this + represents a hardware sensor and groups together the data + channels of the same chip. + </listitem> + <listitem> + <filename>/dev/iio:deviceX</filename>, character device node + interface used for buffered data transfer and for events information + retrieval. + </listitem> + </itemizedlist> + </para> + A typical IIO driver will register itself as an I2C or SPI driver and will + create two routines, <function> probe </function> and <function> remove + </function>. At <function>probe</function>: + <itemizedlist> + <listitem>call <function>iio_device_alloc</function>, which allocates memory + for an IIO device. + </listitem> + <listitem> initialize IIO device fields with driver specific information + (e.g. device name, device channels). + </listitem> + <listitem>call <function> iio_device_register</function>, this registers the + device with the IIO core. After this call the device is ready to accept + requests from user space applications. + </listitem> + </itemizedlist> + At <function>remove</function>, we free the resources allocated in + <function>probe</function> in reverse order: + <itemizedlist> + <listitem><function>iio_device_unregister</function>, unregister the device + from the IIO core. + </listitem> + <listitem><function>iio_device_free</function>, free the memory allocated + for the IIO device. + </listitem> + </itemizedlist> + + <sect2 id="iioattr"> <title> IIO device sysfs interface </title> + <para> + Attributes are sysfs files used to expose chip info and also allowing + applications to set various configuration parameters. For device + with index X, attributes can be found under + <filename>/sys/bus/iio/iio:deviceX/ </filename> directory. + Common attributes are: + <itemizedlist> + <listitem><filename>name</filename>, description of the physical + chip. + </listitem> + <listitem><filename>dev</filename>, shows the major:minor pair + associated with <filename>/dev/iio:deviceX</filename> node. + </listitem> + <listitem><filename>sampling_frequency_available</filename>, + available discrete set of sampling frequency values for + device. + </listitem> + </itemizedlist> + Available standard attributes for IIO devices are described in the + <filename>Documentation/ABI/testing/sysfs-bus-iio </filename> file + in the Linux kernel sources. + </para> + </sect2> + <sect2 id="iiochannel"> <title> IIO device channels </title> +!Finclude/linux/iio/iio.h iio_chan_spec structure. + <para> + An IIO device channel is a representation of a data channel. An + IIO device can have one or multiple channels. For example: + <itemizedlist> + <listitem> + a thermometer sensor has one channel representing the + temperature measurement. + </listitem> + <listitem> + a light sensor with two channels indicating the measurements in + the visible and infrared spectrum. + </listitem> + <listitem> + an accelerometer can have up to 3 channels representing + acceleration on X, Y and Z axes. + </listitem> + </itemizedlist> + An IIO channel is described by the <type> struct iio_chan_spec + </type>. A thermometer driver for the temperature sensor in the + example above would have to describe its channel as follows: + <programlisting> + static const struct iio_chan_spec temp_channel[] = { + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + }, + }; + + </programlisting> + Channel sysfs attributes exposed to userspace are specified in + the form of <emphasis>bitmasks</emphasis>. Depending on their + shared info, attributes can be set in one of the following masks: + <itemizedlist> + <listitem><emphasis>info_mask_separate</emphasis>, attributes will + be specific to this channel</listitem> + <listitem><emphasis>info_mask_shared_by_type</emphasis>, + attributes are shared by all channels of the same type</listitem> + <listitem><emphasis>info_mask_shared_by_dir</emphasis>, attributes + are shared by all channels of the same direction </listitem> + <listitem><emphasis>info_mask_shared_by_all</emphasis>, + attributes are shared by all channels</listitem> + </itemizedlist> + When there are multiple data channels per channel type we have two + ways to distinguish between them: + <itemizedlist> + <listitem> set <emphasis> .modified</emphasis> field of <type> + iio_chan_spec</type> to 1. Modifiers are specified using + <emphasis>.channel2</emphasis> field of the same + <type>iio_chan_spec</type> structure and are used to indicate a + physically unique characteristic of the channel such as its direction + or spectral response. For example, a light sensor can have two channels, + one for infrared light and one for both infrared and visible light. + </listitem> + <listitem> set <emphasis>.indexed </emphasis> field of + <type>iio_chan_spec</type> to 1. In this case the channel is + simply another instance with an index specified by the + <emphasis>.channel</emphasis> field. + </listitem> + </itemizedlist> + Here is how we can make use of the channel's modifiers: + <programlisting> + static const struct iio_chan_spec light_channels[] = { + { + .type = IIO_INTENSITY, + .modified = 1, + .channel2 = IIO_MOD_LIGHT_IR, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared = BIT(IIO_CHAN_INFO_SAMP_FREQ), + }, + { + .type = IIO_INTENSITY, + .modified = 1, + .channel2 = IIO_MOD_LIGHT_BOTH, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared = BIT(IIO_CHAN_INFO_SAMP_FREQ), + }, + { + .type = IIO_LIGHT, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .info_mask_shared = BIT(IIO_CHAN_INFO_SAMP_FREQ), + }, + + } + </programlisting> + This channel's definition will generate two separate sysfs files + for raw data retrieval: + <itemizedlist> + <listitem> + <filename>/sys/bus/iio/iio:deviceX/in_intensity_ir_raw</filename> + </listitem> + <listitem> + <filename>/sys/bus/iio/iio:deviceX/in_intensity_both_raw</filename> + </listitem> + </itemizedlist> + one file for processed data: + <itemizedlist> + <listitem> + <filename>/sys/bus/iio/iio:deviceX/in_illuminance_input + </filename> + </listitem> + </itemizedlist> + and one shared sysfs file for sampling frequency: + <itemizedlist> + <listitem> + <filename>/sys/bus/iio/iio:deviceX/sampling_frequency. + </filename> + </listitem> + </itemizedlist> + </para> + <para> + Here is how we can make use of the channel's indexing: + <programlisting> + static const struct iio_chan_spec light_channels[] = { + { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 0, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + }, + { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + }, + } + </programlisting> + This will generate two separate attributes files for raw data + retrieval: + <itemizedlist> + <listitem> + <filename>/sys/bus/iio/devices/iio:deviceX/in_voltage0_raw</filename>, + representing voltage measurement for channel 0. + </listitem> + <listitem> + <filename>/sys/bus/iio/devices/iio:deviceX/in_voltage1_raw</filename>, + representing voltage measurement for channel 1. + </listitem> + </itemizedlist> + </para> + </sect2> + </sect1> + + <sect1 id="iiobuffer"> <title> Industrial I/O buffers </title> +!Finclude/linux/iio/buffer.h iio_buffer +!Edrivers/iio/industrialio-buffer.c + + <para> + The Industrial I/O core offers a way for continuous data capture + based on a trigger source. Multiple data channels can be read at once + from <filename>/dev/iio:deviceX</filename> character device node, + thus reducing the CPU load. + </para> + + <sect2 id="iiobuffersysfs"> + <title>IIO buffer sysfs interface </title> + <para> + An IIO buffer has an associated attributes directory under <filename> + /sys/bus/iio/iio:deviceX/buffer/</filename>. Here are the existing + attributes: + <itemizedlist> + <listitem> + <emphasis>length</emphasis>, the total number of data samples + (capacity) that can be stored by the buffer. + </listitem> + <listitem> + <emphasis>enable</emphasis>, activate buffer capture. + </listitem> + </itemizedlist> + + </para> + </sect2> + <sect2 id="iiobuffersetup"> <title> IIO buffer setup </title> + <para>The meta information associated with a channel reading + placed in a buffer is called a <emphasis> scan element </emphasis>. + The important bits configuring scan elements are exposed to + userspace applications via the <filename> + /sys/bus/iio/iio:deviceX/scan_elements/</filename> directory. This + file contains attributes of the following form: + <itemizedlist> + <listitem><emphasis>enable</emphasis>, used for enabling a channel. + If and only if its attribute is non zero, then a triggered capture + will contain data samples for this channel. + </listitem> + <listitem><emphasis>type</emphasis>, description of the scan element + data storage within the buffer and hence the form in which it is + read from user space. Format is <emphasis> + [be|le]:[s|u]bits/storagebitsXrepeat[>>shift] </emphasis>. + <itemizedlist> + <listitem> <emphasis>be</emphasis> or <emphasis>le</emphasis>, specifies + big or little endian. + </listitem> + <listitem> + <emphasis>s </emphasis>or <emphasis>u</emphasis>, specifies if + signed (2's complement) or unsigned. + </listitem> + <listitem><emphasis>bits</emphasis>, is the number of valid data + bits. + </listitem> + <listitem><emphasis>storagebits</emphasis>, is the number of bits + (after padding) that it occupies in the buffer. + </listitem> + <listitem> + <emphasis>shift</emphasis>, if specified, is the shift that needs + to be applied prior to masking out unused bits. + </listitem> + <listitem> + <emphasis>repeat</emphasis>, specifies the number of bits/storagebits + repetitions. When the repeat element is 0 or 1, then the repeat + value is omitted. + </listitem> + </itemizedlist> + </listitem> + </itemizedlist> + For example, a driver for a 3-axis accelerometer with 12 bit + resolution where data is stored in two 8-bits registers as + follows: + <programlisting> + 7 6 5 4 3 2 1 0 + +---+---+---+---+---+---+---+---+ + |D3 |D2 |D1 |D0 | X | X | X | X | (LOW byte, address 0x06) + +---+---+---+---+---+---+---+---+ + + 7 6 5 4 3 2 1 0 + +---+---+---+---+---+---+---+---+ + |D11|D10|D9 |D8 |D7 |D6 |D5 |D4 | (HIGH byte, address 0x07) + +---+---+---+---+---+---+---+---+ + </programlisting> + + will have the following scan element type for each axis: + <programlisting> + $ cat /sys/bus/iio/devices/iio:device0/scan_elements/in_accel_y_type + le:s12/16>>4 + </programlisting> + A user space application will interpret data samples read from the + buffer as two byte little endian signed data, that needs a 4 bits + right shift before masking out the 12 valid bits of data. + </para> + <para> + For implementing buffer support a driver should initialize the following + fields in <type>iio_chan_spec</type> definition: + <programlisting> + struct iio_chan_spec { + /* other members */ + int scan_index + struct { + char sign; + u8 realbits; + u8 storagebits; + u8 shift; + u8 repeat; + enum iio_endian endianness; + } scan_type; + }; + </programlisting> + The driver implementing the accelerometer described above will + have the following channel definition: + <programlisting> + struct struct iio_chan_spec accel_channels[] = { + { + .type = IIO_ACCEL, + .modified = 1, + .channel2 = IIO_MOD_X, + /* other stuff here */ + .scan_index = 0, + .scan_type = { + .sign = 's', + .realbits = 12, + .storgebits = 16, + .shift = 4, + .endianness = IIO_LE, + }, + } + /* similar for Y (with channel2 = IIO_MOD_Y, scan_index = 1) + * and Z (with channel2 = IIO_MOD_Z, scan_index = 2) axis + */ + } + </programlisting> + </para> + <para> + Here <emphasis> scan_index </emphasis> defines the order in which + the enabled channels are placed inside the buffer. Channels with a lower + scan_index will be placed before channels with a higher index. Each + channel needs to have a unique scan_index. + </para> + <para> + Setting scan_index to -1 can be used to indicate that the specific + channel does not support buffered capture. In this case no entries will + be created for the channel in the scan_elements directory. + </para> + </sect2> + </sect1> + + <sect1 id="iiotrigger"> <title> Industrial I/O triggers </title> +!Finclude/linux/iio/trigger.h iio_trigger +!Edrivers/iio/industrialio-trigger.c + <para> + In many situations it is useful for a driver to be able to + capture data based on some external event (trigger) as opposed + to periodically polling for data. An IIO trigger can be provided + by a device driver that also has an IIO device based on hardware + generated events (e.g. data ready or threshold exceeded) or + provided by a separate driver from an independent interrupt + source (e.g. GPIO line connected to some external system, timer + interrupt or user space writing a specific file in sysfs). A + trigger may initiate data capture for a number of sensors and + also it may be completely unrelated to the sensor itself. + </para> + + <sect2 id="iiotrigsysfs"> <title> IIO trigger sysfs interface </title> + There are two locations in sysfs related to triggers: + <itemizedlist> + <listitem><filename>/sys/bus/iio/devices/triggerY</filename>, + this file is created once an IIO trigger is registered with + the IIO core and corresponds to trigger with index Y. Because + triggers can be very different depending on type there are few + standard attributes that we can describe here: + <itemizedlist> + <listitem> + <emphasis>name</emphasis>, trigger name that can be later + used for association with a device. + </listitem> + <listitem> + <emphasis>sampling_frequency</emphasis>, some timer based + triggers use this attribute to specify the frequency for + trigger calls. + </listitem> + </itemizedlist> + </listitem> + <listitem> + <filename>/sys/bus/iio/devices/iio:deviceX/trigger/</filename>, this + directory is created once the device supports a triggered + buffer. We can associate a trigger with our device by writing + the trigger's name in the <filename>current_trigger</filename> file. + </listitem> + </itemizedlist> + </sect2> + + <sect2 id="iiotrigattr"> <title> IIO trigger setup</title> + + <para> + Let's see a simple example of how to setup a trigger to be used + by a driver. + + <programlisting> + struct iio_trigger_ops trigger_ops = { + .set_trigger_state = sample_trigger_state, + .validate_device = sample_validate_device, + } + + struct iio_trigger *trig; + + /* first, allocate memory for our trigger */ + trig = iio_trigger_alloc(dev, "trig-%s-%d", name, idx); + + /* setup trigger operations field */ + trig->ops = &trigger_ops; + + /* now register the trigger with the IIO core */ + iio_trigger_register(trig); + </programlisting> + </para> + </sect2> + + <sect2 id="iiotrigsetup"> <title> IIO trigger ops</title> +!Finclude/linux/iio/trigger.h iio_trigger_ops + <para> + Notice that a trigger has a set of operations attached: + <itemizedlist> + <listitem> + <function>set_trigger_state</function>, switch the trigger on/off + on demand. + </listitem> + <listitem> + <function>validate_device</function>, function to validate the + device when the current trigger gets changed. + </listitem> + </itemizedlist> + </para> + </sect2> + </sect1> + <sect1 id="iiotriggered_buffer"> + <title> Industrial I/O triggered buffers </title> + <para> + Now that we know what buffers and triggers are let's see how they + work together. + </para> + <sect2 id="iiotrigbufsetup"> <title> IIO triggered buffer setup</title> +!Edrivers/iio/industrialio-triggered-buffer.c +!Finclude/linux/iio/iio.h iio_buffer_setup_ops + + + <para> + A typical triggered buffer setup looks like this: + <programlisting> + const struct iio_buffer_setup_ops sensor_buffer_setup_ops = { + .preenable = sensor_buffer_preenable, + .postenable = sensor_buffer_postenable, + .postdisable = sensor_buffer_postdisable, + .predisable = sensor_buffer_predisable, + }; + + irqreturn_t sensor_iio_pollfunc(int irq, void *p) + { + pf->timestamp = iio_get_time_ns(); + return IRQ_WAKE_THREAD; + } + + irqreturn_t sensor_trigger_handler(int irq, void *p) + { + u16 buf[8]; + int i = 0; + + /* read data for each active channel */ + for_each_set_bit(bit, active_scan_mask, masklength) + buf[i++] = sensor_get_data(bit) + + iio_push_to_buffers_with_timestamp(indio_dev, buf, timestamp); + + iio_trigger_notify_done(trigger); + return IRQ_HANDLED; + } + + /* setup triggered buffer, usually in probe function */ + iio_triggered_buffer_setup(indio_dev, sensor_iio_polfunc, + sensor_trigger_handler, + sensor_buffer_setup_ops); + </programlisting> + </para> + The important things to notice here are: + <itemizedlist> + <listitem><function> iio_buffer_setup_ops</function>, the buffer setup + functions to be called at predefined points in the buffer configuration + sequence (e.g. before enable, after disable). If not specified, the + IIO core uses the default <type>iio_triggered_buffer_setup_ops</type>. + </listitem> + <listitem><function>sensor_iio_pollfunc</function>, the function that + will be used as top half of poll function. It should do as little + processing as possible, because it runs in interrupt context. The most + common operation is recording of the current timestamp and for this reason + one can use the IIO core defined <function>iio_pollfunc_store_time + </function> function. + </listitem> + <listitem><function>sensor_trigger_handler</function>, the function that + will be used as bottom half of the poll function. This runs in the + context of a kernel thread and all the processing takes place here. + It usually reads data from the device and stores it in the internal + buffer together with the timestamp recorded in the top half. + </listitem> + </itemizedlist> + </sect2> + </sect1> + </chapter> + <chapter id='iioresources'> + <title> Resources </title> + IIO core may change during time so the best documentation to read is the + source code. There are several locations where you should look: + <itemizedlist> + <listitem> + <filename>drivers/iio/</filename>, contains the IIO core plus + and directories for each sensor type (e.g. accel, magnetometer, + etc.) + </listitem> + <listitem> + <filename>include/linux/iio/</filename>, contains the header + files, nice to read for the internal kernel interfaces. + </listitem> + <listitem> + <filename>include/uapi/linux/iio/</filename>, contains files to be + used by user space applications. + </listitem> + <listitem> + <filename>tools/iio/</filename>, contains tools for rapidly + testing buffers, events and device creation. + </listitem> + <listitem> + <filename>drivers/staging/iio/</filename>, contains code for some + drivers or experimental features that are not yet mature enough + to be moved out. + </listitem> + </itemizedlist> + <para> + Besides the code, there are some good online documentation sources: + <itemizedlist> + <listitem> + <ulink url="http://marc.info/?l=linux-iio"> Industrial I/O mailing + list </ulink> + </listitem> + <listitem> + <ulink url="http://wiki.analog.com/software/linux/docs/iio/iio"> + Analog Device IIO wiki page </ulink> + </listitem> + <listitem> + <ulink url="https://fosdem.org/2015/schedule/event/iiosdr/"> + Using the Linux IIO framework for SDR, Lars-Peter Clausen's + presentation at FOSDEM </ulink> + </listitem> + </itemizedlist> + </para> + </chapter> +</book> + +<!-- +vim: softtabstop=2:shiftwidth=2:expandtab:textwidth=72 +--> diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt index 65610bf52ebf..1b049be6c84f 100644 --- a/Documentation/arm/SPEAr/overview.txt +++ b/Documentation/arm/SPEAr/overview.txt @@ -60,4 +60,4 @@ Introduction Document Author --------------- - Viresh Kumar <viresh.linux@gmail.com>, (c) 2010-2012 ST Microelectronics + Viresh Kumar <vireshk@kernel.org>, (c) 2010-2012 ST Microelectronics diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README index 1fe2d7fd4108..5e38e1582f95 100644 --- a/Documentation/arm/sunxi/README +++ b/Documentation/arm/sunxi/README @@ -36,7 +36,7 @@ SunXi family + User Manual http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf - - Allwinner A23 + - Allwinner A23 (sun8i) + Datasheet http://dl.linux-sunxi.org/A23/A23%20Datasheet%20V1.0%2020130830.pdf + User Manual @@ -55,7 +55,23 @@ SunXi family + User Manual http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20User%20Manual%20%20V1.0%2020130322.pdf + - Allwinner A33 (sun8i) + + Datasheet + http://dl.linux-sunxi.org/A33/A33%20Datasheet%20release%201.1.pdf + + User Manual + http://dl.linux-sunxi.org/A33/A33%20user%20manual%20release%201.1.pdf + + - Allwinner H3 (sun8i) + + Datasheet + http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf + * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs - Allwinner A80 + Datasheet http://dl.linux-sunxi.org/A80/A80_Datasheet_Revision_1.0_0404.pdf + + * Octa ARM Cortex-A7 based SoCs + - Allwinner A83T + + Not Supported + + Datasheet + http://dl.linux-sunxi.org/A83T/A83T_datasheet_Revision_1.1.pdf diff --git a/Documentation/device-mapper/cache.txt b/Documentation/device-mapper/cache.txt index 82960cffbad3..785eab87aa71 100644 --- a/Documentation/device-mapper/cache.txt +++ b/Documentation/device-mapper/cache.txt @@ -258,6 +258,12 @@ cache metadata mode : ro if read-only, rw if read-write no further I/O will be permitted and the status will just contain the string 'Fail'. The userspace recovery tools should then be used. +needs_check : 'needs_check' if set, '-' if not set + A metadata operation has failed, resulting in the needs_check + flag being set in the metadata's superblock. The metadata + device must be deactivated and checked/repaired before the + cache can be made fully operational again. '-' indicates + needs_check is not set. Messages -------- diff --git a/Documentation/device-mapper/thin-provisioning.txt b/Documentation/device-mapper/thin-provisioning.txt index 4f67578b2954..1699a55b7b70 100644 --- a/Documentation/device-mapper/thin-provisioning.txt +++ b/Documentation/device-mapper/thin-provisioning.txt @@ -296,7 +296,7 @@ ii) Status underlying device. When this is enabled when loading the table, it can get disabled if the underlying device doesn't support it. - ro|rw + ro|rw|out_of_data_space If the pool encounters certain types of device failures it will drop into a read-only metadata mode in which no changes to the pool metadata (like allocating new blocks) are permitted. @@ -314,6 +314,13 @@ ii) Status module parameter can be used to change this timeout -- it defaults to 60 seconds but may be disabled using a value of 0. + needs_check + A metadata operation has failed, resulting in the needs_check + flag being set in the metadata's superblock. The metadata + device must be deactivated and checked/repaired before the + thin-pool can be made fully operational again. '-' indicates + needs_check is not set. + iii) Messages create_thin <dev id> diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt index 424ac8cbfa08..dd998b9c0433 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -87,7 +87,7 @@ One interrupt per TC channel in a TC block: RSTC Reset Controller required properties: - compatible: Should be "atmel,<chip>-rstc". - <chip> can be "at91sam9260" or "at91sam9g45" + <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3" - reg: Should contain registers location and length Example: diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt index 65a6db2271a2..62938eb9697f 100644 --- a/Documentation/devicetree/bindings/arm/coresight.txt +++ b/Documentation/devicetree/bindings/arm/coresight.txt @@ -17,6 +17,7 @@ its hardware characteristcs. - "arm,coresight-tmc", "arm,primecell"; - "arm,coresight-funnel", "arm,primecell"; - "arm,coresight-etm3x", "arm,primecell"; + - "arm,coresight-etm4x", "arm,primecell"; - "qcom,coresight-replicator1x", "arm,primecell"; * reg: physical base address and length of the register diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index d6b794cef0b8..91e6e5c478d0 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -199,6 +199,7 @@ nodes to be present and contain the properties described below. "qcom,kpss-acc-v1" "qcom,kpss-acc-v2" "rockchip,rk3066-smp" + "ste,dbx500-smp" - cpu-release-addr Usage: required for systems that have an "enable-method" diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt index 42941fdefb11..67da20539540 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.txt +++ b/Documentation/devicetree/bindings/arm/sunxi.txt @@ -9,4 +9,6 @@ using one of the following compatible strings: allwinner,sun6i-a31 allwinner,sun7i-a20 allwinner,sun8i-a23 + allwinner,sun8i-a33 + allwinner,sun8i-h3 allwinner,sun9i-a80 diff --git a/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt b/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt index d3058768b23d..c53e0b08032f 100644 --- a/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt +++ b/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt @@ -35,7 +35,7 @@ Example: device_type = "dma"; reg = <0x0 0x1f270000 0x0 0x10000>, <0x0 0x1f200000 0x0 0x10000>, - <0x0 0x1b008000 0x0 0x2000>, + <0x0 0x1b000000 0x0 0x400000>, <0x0 0x1054a000 0x0 0x100>; interrupts = <0x0 0x82 0x4>, <0x0 0xb8 0x4>, diff --git a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt index e75f0e549fff..971c3eedb1c7 100644 --- a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt +++ b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt @@ -65,8 +65,10 @@ Optional properties: - edid: verbatim EDID data block describing attached display. - ddc: phandle describing the i2c bus handling the display data channel -- port: A port node with endpoint definitions as defined in +- port@[0-1]: Port nodes with endpoint definitions as defined in Documentation/devicetree/bindings/media/video-interfaces.txt. + Port 0 is the input port connected to the IPU display interface, + port 1 is the output port connected to a panel. example: @@ -75,9 +77,29 @@ display@di0 { edid = [edid-data]; interface-pix-fmt = "rgb24"; - port { + port@0 { + reg = <0>; + display_in: endpoint { remote-endpoint = <&ipu_di0_disp0>; }; }; + + port@1 { + reg = <1>; + + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +panel { + ... + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; }; diff --git a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt index 45414bbcd945..f61d5af44a27 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt +++ b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt @@ -10,8 +10,11 @@ Required Properties: Optional Properties: - ti,wakeup : To enable the wakeup comparator in probe - - ti,enable-id-detection: Perform ID detection. + - ti,enable-id-detection: Perform ID detection. If id-gpio is specified + it performs id-detection using GPIO else using OTG core. - ti,enable-vbus-detection: Perform VBUS detection. + - id-gpio: gpio for GPIO ID detection. See gpio binding. + - debounce-delay-ms: debounce delay for GPIO ID pin in milliseconds. palmas-usb { compatible = "ti,twl6035-usb", "ti,palmas-usb"; diff --git a/Documentation/devicetree/bindings/hwmon/lm70.txt b/Documentation/devicetree/bindings/hwmon/lm70.txt new file mode 100644 index 000000000000..e7fd921aa4f1 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/lm70.txt @@ -0,0 +1,21 @@ +* LM70/TMP121/LM71/LM74 thermometer. + +Required properties: +- compatible: one of + "ti,lm70" + "ti,tmp121" + "ti,lm71" + "ti,lm74" + +See Documentation/devicetree/bindings/spi/spi-bus.txt for more required and +optional properties. + +Example: + +spi_master { + temperature-sensor@0 { + compatible = "ti,lm70"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt index ed2f09dc2483..a7afbf60bb9c 100644 --- a/Documentation/devicetree/bindings/hwmon/ltc2978.txt +++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt @@ -3,10 +3,16 @@ ltc2978 Required properties: - compatible: should contain one of: * "lltc,ltc2974" + * "lltc,ltc2975" * "lltc,ltc2977" * "lltc,ltc2978" + * "lltc,ltc2980" * "lltc,ltc3880" + * "lltc,ltc3882" * "lltc,ltc3883" + * "lltc,ltc3886" + * "lltc,ltc3887" + * "lltc,ltm2987" * "lltc,ltm4676" - reg: I2C slave address @@ -17,10 +23,10 @@ Optional properties: standard binding for regulators; see regulator.txt. Valid names of regulators depend on number of supplies supported per device: - * ltc2974 : vout0 - vout3 - * ltc2977 : vout0 - vout7 + * ltc2974, ltc2975 : vout0 - vout3 + * ltc2977, ltc2980, ltm2987 : vout0 - vout7 * ltc2978 : vout0 - vout7 - * ltc3880 : vout0 - vout1 + * ltc3880, ltc3882, ltc3886 : vout0 - vout1 * ltc3883 : vout0 * ltm4676 : vout0 - vout1 diff --git a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt index b85184391b78..2a1f3af30155 100644 --- a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt +++ b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt @@ -18,6 +18,7 @@ Required properties: "mcp3202" "mcp3204" "mcp3208" + "mcp3301" Examples: diff --git a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt index 3eb40e20c143..1aad0514e647 100644 --- a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt @@ -17,6 +17,11 @@ Recommended properties: - Frequency in normal mode (ADLPC=0, ADHSC=0) - Frequency in high-speed mode (ADLPC=0, ADHSC=1) - Frequency in low-power mode (ADLPC=1, ADHSC=0) +- min-sample-time: Minimum sampling time in nanoseconds. This value has + to be chosen according to the conversion mode and the connected analog + source resistance (R_as) and capacitance (C_as). Refer the datasheet's + operating requirements. A safe default across a wide range of R_as and + C_as as well as conversion modes is 1000ns. Example: adc0: adc@4003b000 { diff --git a/Documentation/devicetree/bindings/iio/magnetometer/mmc35240.txt b/Documentation/devicetree/bindings/iio/magnetometer/mmc35240.txt new file mode 100644 index 000000000000..a01235c7fa15 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/mmc35240.txt @@ -0,0 +1,13 @@ +* MEMSIC MMC35240 magnetometer sensor + +Required properties: + + - compatible : should be "memsic,mmc35240" + - reg : the I2C address of the magnetometer + +Example: + +mmc35240@30 { + compatible = "memsic,mmc35240"; + reg = <0x30>; +}; diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt index 8a6be3bdf267..d3ccdb190c53 100644 --- a/Documentation/devicetree/bindings/iio/st-sensors.txt +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt @@ -35,6 +35,7 @@ Accelerometers: - st,lsm303dl-accel - st,lsm303dlm-accel - st,lsm330-accel +- st,lsm303agr-accel Gyroscopes: - st,l3g4200d-gyro @@ -46,6 +47,7 @@ Gyroscopes: - st,lsm330-gyro Magnetometers: +- st,lsm303agr-magn - st,lsm303dlh-magn - st,lsm303dlhc-magn - st,lsm303dlm-magn diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt index c03eec116872..3443e0f838df 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt +++ b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt @@ -35,3 +35,6 @@ the PCIe specification. NOTE: this only applies to the SMMU itself, not masters connected upstream of the SMMU. + +- hisilicon,broken-prefetch-cmd + : Avoid sending CMD_PREFETCH_* commands to the SMMU. diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt index 938f8e1ba205..0db60470ebb6 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt +++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt @@ -8,6 +8,7 @@ of the EMIF IP and memory parts attached to it. Required properties: - compatible : Should be of the form "ti,emif-<ip-rev>" where <ip-rev> is the IP revision of the specific EMIF instance. + For am437x should be ti,emif-am4372. - phy-type : <u32> indicating the DDR phy type. Following are the allowed values diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index 5d0376b8f202..211e7785f4d2 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -17,7 +17,6 @@ Required properties: "fsl,imx6sx-usdhc" Optional properties: -- fsl,cd-controller : Indicate to use controller internal card detection - fsl,wp-controller : Indicate to use controller internal write protection - fsl,delay-line : Specify the number of delay cells for override mode. This is used to set the clock delay for DLL(Delay Line) on override mode @@ -35,7 +34,6 @@ esdhc@70004000 { compatible = "fsl,imx51-esdhc"; reg = <0x70004000 0x4000>; interrupts = <1>; - fsl,cd-controller; fsl,wp-controller; }; diff --git a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt index fabdf64a5737..d543ed3f5363 100644 --- a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt +++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt @@ -4,6 +4,10 @@ Required properties: - compatible: "allwinner,sun4i-a10-sid" or "allwinner,sun7i-a20-sid" - reg: Should contain registers location and length += Data cells = +Are child nodes of qfprom, bindings of which as described in +bindings/nvmem/nvmem.txt + Example for sun4i: sid@01c23800 { compatible = "allwinner,sun4i-a10-sid"; diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.txt b/Documentation/devicetree/bindings/nvmem/nvmem.txt new file mode 100644 index 000000000000..b52bc11e9597 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/nvmem.txt @@ -0,0 +1,80 @@ += NVMEM(Non Volatile Memory) Data Device Tree Bindings = + +This binding is intended to represent the location of hardware +configuration data stored in NVMEMs like eeprom, efuses and so on. + +On a significant proportion of boards, the manufacturer has stored +some data on NVMEM, for the OS to be able to retrieve these information +and act upon it. Obviously, the OS has to know about where to retrieve +these data from, and where they are stored on the storage device. + +This document is here to document this. + += Data providers = +Contains bindings specific to provider drivers and data cells as children +of this node. + +Optional properties: + read-only: Mark the provider as read only. + += Data cells = +These are the child nodes of the provider which contain data cell +information like offset and size in nvmem provider. + +Required properties: +reg: specifies the offset in byte within the storage device. + +Optional properties: + +bits: Is pair of bit location and number of bits, which specifies offset + in bit and number of bits within the address range specified by reg property. + Offset takes values from 0-7. + +For example: + + /* Provider */ + qfprom: qfprom@00700000 { + ... + + /* Data cells */ + tsens_calibration: calib@404 { + reg = <0x404 0x10>; + }; + + tsens_calibration_bckp: calib_bckp@504 { + reg = <0x504 0x11>; + bits = <6 128> + }; + + pvs_version: pvs-version@6 { + reg = <0x6 0x2> + bits = <7 2> + }; + + speed_bin: speed-bin@c{ + reg = <0xc 0x1>; + bits = <2 3>; + + }; + ... + }; + += Data consumers = +Are device nodes which consume nvmem data cells/providers. + +Required-properties: +nvmem-cells: list of phandle to the nvmem data cells. +nvmem-cell-names: names for the each nvmem-cells specified. Required if + nvmem-cells is used. + +Optional-properties: +nvmem : list of phandles to nvmem providers. +nvmem-names: names for the each nvmem provider. required if nvmem is used. + +For example: + + tsens { + ... + nvmem-cells = <&tsens_calibration>; + nvmem-cell-names = "calibration"; + }; diff --git a/Documentation/devicetree/bindings/nvmem/qfprom.txt b/Documentation/devicetree/bindings/nvmem/qfprom.txt new file mode 100644 index 000000000000..4ad68b7f5c18 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/qfprom.txt @@ -0,0 +1,35 @@ += Qualcomm QFPROM device tree bindings = + +This binding is intended to represent QFPROM which is found in most QCOM SOCs. + +Required properties: +- compatible: should be "qcom,qfprom" +- reg: Should contain registers location and length + += Data cells = +Are child nodes of qfprom, bindings of which as described in +bindings/nvmem/nvmem.txt + +Example: + + qfprom: qfprom@00700000 { + compatible = "qcom,qfprom"; + reg = <0x00700000 0x8000>; + ... + /* Data cells */ + tsens_calibration: calib@404 { + reg = <0x4404 0x10>; + }; + }; + + += Data consumers = +Are device nodes which consume nvmem data cells. + +For example: + + tsens { + ... + nvmem-cells = <&tsens_calibration>; + nvmem-cell-names = "calibration"; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt b/Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt new file mode 100644 index 000000000000..bd61b467e30a --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt @@ -0,0 +1,26 @@ +NXP LPC18xx/43xx internal USB OTG PHY binding +--------------------------------------------- + +This file contains documentation for the internal USB OTG PHY found +in NXP LPC18xx and LPC43xx SoCs. + +Required properties: +- compatible : must be "nxp,lpc1850-usb-otg-phy" +- clocks : must be exactly one entry +See: Documentation/devicetree/bindings/clock/clock-bindings.txt +- #phy-cells : must be 0 for this phy +See: Documentation/devicetree/bindings/phy/phy-bindings.txt + +The phy node must be a child of the creg syscon node. + +Example: +creg: syscon@40043000 { + compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd"; + reg = <0x40043000 0x1000>; + + usb0_otg_phy: phy@004 { + compatible = "nxp,lpc1850-usb-otg-phy"; + clocks = <&ccu1 CLK_USB0>; + #phy-cells = <0>; + }; +}; diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt index 16528b9eb561..0cebf7454517 100644 --- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt @@ -7,6 +7,8 @@ Required properties: * allwinner,sun5i-a13-usb-phy * allwinner,sun6i-a31-usb-phy * allwinner,sun7i-a20-usb-phy + * allwinner,sun8i-a23-usb-phy + * allwinner,sun8i-a33-usb-phy - reg : a list of offset + length pairs - reg-names : * "phy_ctrl" @@ -17,12 +19,21 @@ Required properties: - clock-names : * "usb_phy" for sun4i, sun5i or sun7i * "usb0_phy", "usb1_phy" and "usb2_phy" for sun6i + * "usb0_phy", "usb1_phy" for sun8i - resets : a list of phandle + reset specifier pairs - reset-names : * "usb0_reset" * "usb1_reset" * "usb2_reset" for sun4i, sun6i or sun7i +Optional properties: +- usb0_id_det-gpios : gpio phandle for reading the otg id pin value +- usb0_vbus_det-gpios : gpio phandle for detecting the presence of usb0 vbus +- usb0_vbus_power-supply: power-supply phandle for usb0 vbus presence detect +- usb0_vbus-supply : regulator phandle for controller usb0 vbus +- usb1_vbus-supply : regulator phandle for controller usb1 vbus +- usb2_vbus-supply : regulator phandle for controller usb2 vbus + Example: usbphy: phy@0x01c13400 { #phy-cells = <1>; @@ -32,6 +43,13 @@ Example: reg-names = "phy_ctrl", "pmu1", "pmu2"; clocks = <&usb_clk 8>; clock-names = "usb_phy"; - resets = <&usb_clk 1>, <&usb_clk 2>; - reset-names = "usb1_reset", "usb2_reset"; + resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>; + reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ + usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; }; diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index 305e3df3d9b1..9cf9446eaf2e 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -82,6 +82,9 @@ Optional properties: - id: If there are multiple instance of the same type, in order to differentiate between each instance "id" can be used (e.g., multi-lane PCIe PHY). If "id" is not provided, it is set to default value of '1'. + - syscon-pllreset: Handle to system control region that contains the + CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0 + register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy. This is usually a subnode of ocp2scp to which it is connected. @@ -100,3 +103,16 @@ usb3phy@4a084400 { "sysclk", "refclk"; }; + +sata_phy: phy@4A096000 { + compatible = "ti,phy-pipe3-sata"; + reg = <0x4A096000 0x80>, /* phy_rx */ + <0x4A096400 0x64>, /* phy_tx */ + <0x4A096800 0x40>; /* pll_ctrl */ + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_sata>; + clocks = <&sys_clkin1>, <&sata_ref_clk>; + clock-names = "sysclk", "refclk"; + syscon-pllreset = <&scm_conf 0x3fc>; + #phy-cells = <0>; +}; diff --git a/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt new file mode 100644 index 000000000000..0e6d8754e7ec --- /dev/null +++ b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt @@ -0,0 +1,48 @@ +Qualcomm Coincell Charger: + +The hardware block controls charging for a coincell or capacitor that is +used to provide power backup for certain features of the power management +IC (PMIC) + +- compatible: + Usage: required + Value type: <string> + Definition: must be: "qcom,pm8941-coincell" + +- reg: + Usage: required + Value type: <u32> + Definition: base address of the coincell charger registers + +- qcom,rset-ohms: + Usage: required + Value type: <u32> + Definition: resistance (in ohms) for current-limiting resistor + must be one of: 800, 1200, 1700, 2100 + +- qcom,vset-millivolts: + Usage: required + Value type: <u32> + Definition: voltage (in millivolts) to apply for charging + must be one of: 2500, 3000, 3100, 3200 + +- qcom,charger-disable: + Usage: optional + Value type: <boolean> + Definition: definining this property disables charging + +This charger is a sub-node of one of the 8941 PMIC blocks, and is specified +as a child node in DTS of that node. See ../mfd/qcom,spmi-pmic.txt and +../mfd/qcom-pm8xxx.txt + +Example: + + pm8941@0 { + coincell@2800 { + compatible = "qcom,pm8941-coincell"; + reg = <0x2800>; + + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; + }; + }; diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt index 90787aa2e648..e6e6142e33ac 100644 --- a/Documentation/devicetree/bindings/serial/atmel-usart.txt +++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt @@ -22,6 +22,8 @@ Optional properties: memory peripheral interface and USART DMA channel ID, FIFO configuration. Refer to dma.txt and atmel-dma.txt for details. - dma-names: "rx" for RX channel, "tx" for TX channel. +- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO + capable USARTs. <chip> compatible description: - at91rm9200: legacy USART support @@ -57,4 +59,5 @@ Example: dmas = <&dma0 2 0x3>, <&dma0 2 0x204>; dma-names = "tx", "rx"; + atmel,fifo-size = <32>; }; diff --git a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt index ebcbb62c0a76..51b3c9e80ad9 100644 --- a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt +++ b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt @@ -6,7 +6,7 @@ Required properties: - interrupts: device interrupt Optional properties: -- {dtr,dsr,ri,cd}-gpios: specify a GPIO for DTR/DSR/RI/CD +- {dtr,dsr,rng,dcd}-gpios: specify a GPIO for DTR/DSR/RI/DCD line respectively. Example: @@ -16,4 +16,8 @@ serial@b00260000 { reg = <0xb0026000 0x1000>; interrupts = <68>; status = "disabled"; + dtr-gpios = <&sysgpio 0 GPIO_ACTIVE_LOW>; + dsr-gpios = <&sysgpio 1 GPIO_ACTIVE_LOW>; + rng-gpios = <&sysgpio 2 GPIO_ACTIVE_LOW>; + dcd-gpios = <&sysgpio 3 GPIO_ACTIVE_LOW>; }; diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt index 54c2a155c783..7a71b5de77d6 100644 --- a/Documentation/devicetree/bindings/serial/omap_serial.txt +++ b/Documentation/devicetree/bindings/serial/omap_serial.txt @@ -4,6 +4,9 @@ Required properties: - compatible : should be "ti,omap2-uart" for OMAP2 controllers - compatible : should be "ti,omap3-uart" for OMAP3 controllers - compatible : should be "ti,omap4-uart" for OMAP4 controllers +- compatible : should be "ti,am4372-uart" for AM437x controllers +- compatible : should be "ti,am3352-uart" for AM335x controllers +- compatible : should be "ti,dra742-uart" for DRA7x controllers - reg : address and length of the register space - interrupts or interrupts-extended : Should contain the uart interrupt specifier or both the interrupt diff --git a/Documentation/devicetree/bindings/sound/mt8173-max98090.txt b/Documentation/devicetree/bindings/sound/mt8173-max98090.txt index 829bd26d17f8..519e97c8f1b8 100644 --- a/Documentation/devicetree/bindings/sound/mt8173-max98090.txt +++ b/Documentation/devicetree/bindings/sound/mt8173-max98090.txt @@ -3,11 +3,13 @@ MT8173 with MAX98090 CODEC Required properties: - compatible : "mediatek,mt8173-max98090" - mediatek,audio-codec: the phandle of the MAX98090 audio codec +- mediatek,platform: the phandle of MT8173 ASoC platform Example: sound { compatible = "mediatek,mt8173-max98090"; mediatek,audio-codec = <&max98090>; + mediatek,platform = <&afe>; }; diff --git a/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt b/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt index 61e98c976bd4..f205ce9e31dd 100644 --- a/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt +++ b/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt @@ -3,11 +3,13 @@ MT8173 with RT5650 RT5676 CODECS Required properties: - compatible : "mediatek,mt8173-rt5650-rt5676" - mediatek,audio-codec: the phandles of rt5650 and rt5676 codecs +- mediatek,platform: the phandle of MT8173 ASoC platform Example: sound { compatible = "mediatek,mt8173-rt5650-rt5676"; mediatek,audio-codec = <&rt5650 &rt5676>; + mediatek,platform = <&afe>; }; diff --git a/Documentation/devicetree/bindings/spi/spi-ath79.txt b/Documentation/devicetree/bindings/spi/spi-ath79.txt index f1ad9c367532..9c696fa66f81 100644 --- a/Documentation/devicetree/bindings/spi/spi-ath79.txt +++ b/Documentation/devicetree/bindings/spi/spi-ath79.txt @@ -3,7 +3,7 @@ Binding for Qualcomm Atheros AR7xxx/AR9xxx SPI controller Required properties: - compatible: has to be "qca,<soc-type>-spi", "qca,ar7100-spi" as fallback. - reg: Base address and size of the controllers memory area -- clocks: phandle to the AHB clock. +- clocks: phandle of the AHB clock. - clock-names: has to be "ahb". - #address-cells: <1>, as required by generic SPI binding. - #size-cells: <0>, also as required by generic SPI binding. @@ -12,9 +12,9 @@ Child nodes as per the generic SPI binding. Example: - spi@1F000000 { + spi@1f000000 { compatible = "qca,ar9132-spi", "qca,ar7100-spi"; - reg = <0x1F000000 0x10>; + reg = <0x1f000000 0x10>; clocks = <&pll 2>; clock-names = "ahb"; diff --git a/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt b/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt index 307537787574..555fb117d4fa 100644 --- a/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt +++ b/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt @@ -1,4 +1,4 @@ -* Freescale i.MX28 LRADC device driver +* Freescale MXS LRADC device driver Required properties: - compatible: Should be "fsl,imx23-lradc" for i.MX23 SoC and "fsl,imx28-lradc" diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt new file mode 100644 index 000000000000..862cd7c79805 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt @@ -0,0 +1,29 @@ +Allwinner sun4i A10 musb DRC/OTG controller +------------------------------------------- + +Required properties: + - compatible : "allwinner,sun4i-a10-musb", "allwinner,sun6i-a31-musb" + or "allwinner,sun8i-a33-musb" + - reg : mmio address range of the musb controller + - clocks : clock specifier for the musb controller ahb gate clock + - reset : reset specifier for the ahb reset (A31 and newer only) + - interrupts : interrupt to which the musb controller is connected + - interrupt-names : must be "mc" + - phys : phy specifier for the otg phy + - phy-names : must be "usb" + - dr_mode : Dual-Role mode must be "host" or "otg" + - extcon : extcon specifier for the otg phy + +Example: + + usb_otg: usb@01c13000 { + compatible = "allwinner,sun4i-a10-musb"; + reg = <0x01c13000 0x0400>; + clocks = <&ahb_gates 0>; + interrupts = <38>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt index 553e2fae3a76..d71ef07bca5d 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt @@ -30,6 +30,21 @@ Optional properties: argument that indicate usb controller index - disable-over-current: (FSL only) disable over current detect - external-vbus-divider: (FSL only) enables off-chip resistor divider for Vbus +- itc-setting: interrupt threshold control register control, the setting + should be aligned with ITC bits at register USBCMD. +- ahb-burst-config: it is vendor dependent, the required value should be + aligned with AHBBRST at SBUSCFG, the range is from 0x0 to 0x7. This + property is used to change AHB burst configuration, check the chipidea + spec for meaning of each value. If this property is not existed, it + will use the reset value. +- tx-burst-size-dword: it is vendor dependent, the tx burst size in dword + (4 bytes), This register represents the maximum length of a the burst + in 32-bit words while moving data from system memory to the USB + bus, changing this value takes effect only the SBUSCFG.AHBBRST is 0. +- rx-burst-size-dword: it is vendor dependent, the rx burst size in dword + (4 bytes), This register represents the maximum length of a the burst + in 32-bit words while moving data from the USB bus to system memory, + changing this value takes effect only the SBUSCFG.AHBBRST is 0. Example: @@ -41,4 +56,9 @@ Example: phys = <&usb_phy0>; phy-names = "usb-phy"; vbus-supply = <®_usb0_vbus>; + gadget-itc-setting = <0x4>; /* 4 micro-frames */ + /* Incremental burst of unspecified length */ + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; /* 64 bytes */ + rx-burst-size-dword = <0x10>; }; diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt index 477d5bb5e51c..bba825711873 100644 --- a/Documentation/devicetree/bindings/usb/generic.txt +++ b/Documentation/devicetree/bindings/usb/generic.txt @@ -11,6 +11,19 @@ Optional properties: "peripheral" and "otg". In case this attribute isn't passed via DT, USB DRD controllers should default to OTG. + - otg-rev: tells usb driver the release number of the OTG and EH supplement + with which the device and its descriptors are compliant, + in binary-coded decimal (i.e. 2.0 is 0200H). This + property is used if any real OTG features(HNP/SRP/ADP) + is enabled, if ADP is required, otg-rev should be + 0x0200 or above. + - hnp-disable: tells OTG controllers we want to disable OTG HNP, normally HNP + is the basic function of real OTG except you want it + to be a srp-capable only B device. + - srp-disable: tells OTG controllers we want to disable OTG SRP, SRP is + optional for OTG device. + - adp-disable: tells OTG controllers we want to disable OTG ADP, ADP is + optional for OTG device. This is an attribute to a USB controller such as: @@ -21,4 +34,6 @@ dwc3@4a030000 { usb-phy = <&usb2_phy>, <&usb3,phy>; maximum-speed = "super-speed"; dr_mode = "otg"; + otg-rev = <0x0200>; + adp-disable; }; diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt index bd8d9e753029..8654a3ec23e4 100644 --- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt +++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt @@ -52,6 +52,10 @@ Required properties: Optional properties: - dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg" +- switch-gpio: A phandle + gpio-specifier pair. Some boards are using Dual + SPDT USB Switch, witch is cotrolled by GPIO to de/multiplex + D+/D- USB lines between connectors. + - qcom,phy-init-sequence: PHY configuration sequence values. This is related to Device Mode Eye Diagram test. Start address at which these values will be written is ULPI_EXT_VENDOR_SPECIFIC. Value of -1 is reserved as diff --git a/Documentation/devicetree/bindings/usb/qcom,usb-8x16-phy.txt b/Documentation/devicetree/bindings/usb/qcom,usb-8x16-phy.txt new file mode 100644 index 000000000000..2cb2168cef41 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/qcom,usb-8x16-phy.txt @@ -0,0 +1,76 @@ +Qualcomm's APQ8016/MSM8916 USB transceiver controller + +- compatible: + Usage: required + Value type: <string> + Definition: Should contain "qcom,usb-8x16-phy". + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: USB PHY base address and length of the register map + +- clocks: + Usage: required + Value type: <prop-encoded-array> + Definition: See clock-bindings.txt section "consumers". List of + two clock specifiers for interface and core controller + clocks. + +- clock-names: + Usage: required + Value type: <string> + Definition: Must contain "iface" and "core" strings. + +- vddcx-supply: + Usage: required + Value type: <phandle> + Definition: phandle to the regulator VDCCX supply node. + +- v1p8-supply: + Usage: required + Value type: <phandle> + Definition: phandle to the regulator 1.8V supply node. + +- v3p3-supply: + Usage: required + Value type: <phandle> + Definition: phandle to the regulator 3.3V supply node. + +- resets: + Usage: required + Value type: <prop-encoded-array> + Definition: See reset.txt section "consumers". PHY reset specifier. + +- reset-names: + Usage: required + Value type: <string> + Definition: Must contain "phy" string. + +- switch-gpio: + Usage: optional + Value type: <prop-encoded-array> + Definition: Some boards are using Dual SPDT USB Switch, witch is + controlled by GPIO to de/multiplex D+/D- USB lines + between connectors. + +Example: + usb_phy: phy@78d9000 { + compatible = "qcom,usb-8x16-phy"; + reg = <0x78d9000 0x400>; + + vddcx-supply = <&pm8916_s1_corner>; + v1p8-supply = <&pm8916_l7>; + v3p3-supply = <&pm8916_l13>; + + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + + resets = <&gcc GCC_USB2A_PHY_BCR>; + reset-names = "phy"; + + // D+/D- lines: 1 - Routed to HUB, 0 - Device connector + switch-gpio = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>; + }; + diff --git a/Documentation/fb/sm712fb.txt b/Documentation/fb/sm712fb.txt new file mode 100644 index 000000000000..c388442edf51 --- /dev/null +++ b/Documentation/fb/sm712fb.txt @@ -0,0 +1,31 @@ +What is sm712fb? +================= + +This is a graphics framebuffer driver for Silicon Motion SM712 based processors. + +How to use it? +============== + +Switching modes is done using the video=sm712fb:... boot parameter. + +If you want, for example, enable a resolution of 1280x1024x24bpp you should +pass to the kernel this command line: "video=sm712fb:0x31B". + +You should not compile-in vesafb. + +Currently supported video modes are: + +[Graphic modes] + +bpp | 640x480 800x600 1024x768 1280x1024 +----+-------------------------------------------- + 8 | 0x301 0x303 0x305 0x307 + 16 | 0x311 0x314 0x317 0x31A + 24 | 0x312 0x315 0x318 0x31B + +Missing Features +================ +(alias TODO list) + + * 2D acceleratrion + * dual-head support diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt index b35a64b82f9e..9494afb9476a 100644 --- a/Documentation/filesystems/sysfs.txt +++ b/Documentation/filesystems/sysfs.txt @@ -212,7 +212,10 @@ Other notes: - show() methods should return the number of bytes printed into the buffer. This is the return value of scnprintf(). -- show() should always use scnprintf(). +- show() must not use snprintf() when formatting the value to be + returned to user space. If you can guarantee that an overflow + will never happen you can use sprintf() otherwise you must use + scnprintf(). - store() should return the number of bytes used from the buffer. If the entire buffer has been used, just return the count argument. diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275 index 15b4a20d5062..d697229e3c18 100644 --- a/Documentation/hwmon/adm1275 +++ b/Documentation/hwmon/adm1275 @@ -14,6 +14,10 @@ Supported chips: Prefix: 'adm1276' Addresses scanned: - Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf + * Analog Devices ADM1293/ADM1294 + Prefix: 'adm1293', 'adm1294' + Addresses scanned: - + Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADM1293_1294.pdf Author: Guenter Roeck <linux@roeck-us.net> @@ -22,12 +26,12 @@ Description ----------- This driver supports hardware montoring for Analog Devices ADM1075, ADM1275, -and ADM1276 Hot-Swap Controller and Digital Power Monitor. +ADM1276, ADM1293, and ADM1294 Hot-Swap Controller and Digital Power Monitors. -ADM1075, ADM1275, and ADM1276 are hot-swap controllers that allow a circuit -board to be removed from or inserted into a live backplane. They also feature -current and voltage readback via an integrated 12-bit analog-to-digital -converter (ADC), accessed using a PMBus interface. +ADM1075, ADM1275, ADM1276, ADM1293, and ADM1294 are hot-swap controllers that +allow a circuit board to be removed from or inserted into a live backplane. +They also feature current and voltage readback via an integrated 12 +bit analog-to-digital converter (ADC), accessed using a PMBus interface. The driver is a client driver to the core PMBus driver. Please see Documentation/hwmon/pmbus for details on PMBus client drivers. @@ -58,16 +62,16 @@ Sysfs entries The following attributes are supported. Limits are read-write, history reset attributes are write-only, all other attributes are read-only. -in1_label "vin1" or "vout1" depending on chip variant and - configuration. On ADM1075, vout1 reports the voltage on - the VAUX pin. -in1_input Measured voltage. -in1_min Minimum Voltage. -in1_max Maximum voltage. -in1_min_alarm Voltage low alarm. -in1_max_alarm Voltage high alarm. -in1_highest Historical maximum voltage. -in1_reset_history Write any value to reset history. +inX_label "vin1" or "vout1" depending on chip variant and + configuration. On ADM1075, ADM1293, and ADM1294, + vout1 reports the voltage on the VAUX pin. +inX_input Measured voltage. +inX_min Minimum Voltage. +inX_max Maximum voltage. +inX_min_alarm Voltage low alarm. +inX_max_alarm Voltage high alarm. +inX_highest Historical maximum voltage. +inX_reset_history Write any value to reset history. curr1_label "iout1" curr1_input Measured current. @@ -86,7 +90,9 @@ curr1_reset_history Write any value to reset history. power1_label "pin1" power1_input Input power. +power1_input_lowest Lowest observed input power. ADM1293 and ADM1294 only. +power1_input_highest Highest observed input power. power1_reset_history Write any value to reset history. - Power attributes are supported on ADM1075 and ADM1276 - only. + Power attributes are supported on ADM1075, ADM1276, + ADM1293, and ADM1294. diff --git a/Documentation/hwmon/fam15h_power b/Documentation/hwmon/fam15h_power index 80654813d04a..e2b1b69eebea 100644 --- a/Documentation/hwmon/fam15h_power +++ b/Documentation/hwmon/fam15h_power @@ -3,12 +3,13 @@ Kernel driver fam15h_power Supported chips: * AMD Family 15h Processors +* AMD Family 16h Processors Prefix: 'fam15h_power' Addresses scanned: PCI space Datasheets: BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors - (not yet published) + BIOS and Kernel Developer's Guide (BKDG) For AMD Family 16h Processors Author: Andreas Herrmann <herrmann.der.user@googlemail.com> @@ -16,10 +17,11 @@ Description ----------- This driver permits reading of registers providing power information -of AMD Family 15h processors. +of AMD Family 15h and 16h processors. -For AMD Family 15h processors the following power values can be -calculated using different processor northbridge function registers: +For AMD Family 15h and 16h processors the following power values can +be calculated using different processor northbridge function +registers: * BasePwrWatts: Specifies in watts the maximum amount of power consumed by the processor for NB and logic external to the core. diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index e87294878334..733296d65449 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -38,6 +38,10 @@ Supported chips: Prefix: 'it8728' Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Not publicly available + * IT8732F + Prefix: 'it8732' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available * IT8771E Prefix: 'it8771' Addresses scanned: from Super I/O config space (8 I/O ports) @@ -111,9 +115,9 @@ Description ----------- This driver implements support for the IT8603E, IT8620E, IT8623E, IT8705F, -IT8712F, IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, -IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, and SiS950 -chips. +IT8712F, IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, +IT8758E, IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, and +SiS950 chips. These chips are 'Super I/O chips', supporting floppy disks, infrared ports, joysticks and other miscellaneous stuff. For hardware monitoring, they @@ -137,10 +141,10 @@ The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E and later IT8712F revisions have support for 2 additional fans. The additional fans are supported by the driver. -The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E, IT8781F, IT8782F, IT8783E/F, -and late IT8712F and IT8705F also have optional 16-bit tachometer counters -for fans 1 to 3. This is better (no more fan clock divider mess) but not -compatible with the older chips and revisions. The 16-bit tachometer mode +The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E, IT8732F, IT8781F, IT8782F, +IT8783E/F, and late IT8712F and IT8705F also have optional 16-bit tachometer +counters for fans 1 to 3. This is better (no more fan clock divider mess) but +not compatible with the older chips and revisions. The 16-bit tachometer mode is enabled by the driver when one of the above chips is detected. The IT8726F is just bit enhanced IT8716F with additional hardware @@ -159,6 +163,9 @@ IT8728F. It only supports 16-bit fan mode. The IT8790E supports up to 3 fans. 16-bit fan mode is always enabled. +The IT8732F supports a closed-loop mode for fan control, but this is not +currently implemented by the driver. + Temperatures are measured in degrees Celsius. An alarm is triggered once when the Overtemperature Shutdown limit is crossed. @@ -173,12 +180,14 @@ is done. Voltage sensors (also known as IN sensors) report their values in volts. An alarm is triggered if the voltage has crossed a programmable minimum or maximum limit. Note that minimum in this case always means 'closest to -zero'; this is important for negative voltage measurements. All voltage -inputs can measure voltages between 0 and 4.08 volts, with a resolution of -0.016 volt (except IT8603E, IT8721F/IT8758E and IT8728F: 0.012 volt.) The -battery voltage in8 does not have limit registers. - -On the IT8603E, IT8721F/IT8758E, IT8781F, IT8782F, and IT8783E/F, some +zero'; this is important for negative voltage measurements. On most chips, all +voltage inputs can measure voltages between 0 and 4.08 volts, with a resolution +of 0.016 volt. IT8603E, IT8721F/IT8758E and IT8728F can measure between 0 and +3.06 volts, with a resolution of 0.012 volt. IT8732F can measure between 0 and +2.8 volts with a resolution of 0.0109 volt. The battery voltage in8 does not +have limit registers. + +On the IT8603E, IT8721F/IT8758E, IT8732F, IT8781F, IT8782F, and IT8783E/F, some voltage inputs are internal and scaled inside the chip: * in3 (optional) * in7 (optional for IT8781F, IT8782F, and IT8783E/F) diff --git a/Documentation/hwmon/ltc2978 b/Documentation/hwmon/ltc2978 index 686c078bb0e0..9a49d3c90cd1 100644 --- a/Documentation/hwmon/ltc2978 +++ b/Documentation/hwmon/ltc2978 @@ -6,6 +6,10 @@ Supported chips: Prefix: 'ltc2974' Addresses scanned: - Datasheet: http://www.linear.com/product/ltc2974 + * Linear Technology LTC2975 + Prefix: 'ltc2975' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc2975 * Linear Technology LTC2977 Prefix: 'ltc2977' Addresses scanned: - @@ -15,14 +19,38 @@ Supported chips: Addresses scanned: - Datasheet: http://www.linear.com/product/ltc2978 http://www.linear.com/product/ltc2978a + * Linear Technology LTC2980 + Prefix: 'ltc2980' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc2980 * Linear Technology LTC3880 Prefix: 'ltc3880' Addresses scanned: - Datasheet: http://www.linear.com/product/ltc3880 + * Linear Technology LTC3882 + Prefix: 'ltc3882' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc3882 * Linear Technology LTC3883 Prefix: 'ltc3883' Addresses scanned: - Datasheet: http://www.linear.com/product/ltc3883 + * Linear Technology LTC3886 + Prefix: 'ltc3886' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc3886 + * Linear Technology LTC3887 + Prefix: 'ltc3887' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc3887 + * Linear Technology LTM2987 + Prefix: 'ltm2987' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltm2987 + * Linear Technology LTM4675 + Prefix: 'ltm4675' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltm4675 * Linear Technology LTM4676 Prefix: 'ltm4676' Addresses scanned: - @@ -34,11 +62,20 @@ Author: Guenter Roeck <linux@roeck-us.net> Description ----------- -LTC2974 is a quad digital power supply manager. LTC2978 is an octal power supply -monitor. LTC2977 is a pin compatible replacement for LTC2978. LTC3880 is a dual -output poly-phase step-down DC/DC controller. LTC3883 is a single phase -step-down DC/DC controller. LTM4676 is a dual 13A or single 26A uModule -regulator. +LTC2974 and LTC2975 are quad digital power supply managers. +LTC2978 is an octal power supply monitor. +LTC2977 is a pin compatible replacement for LTC2978. +LTC2980 is a 16-channel Power System Manager, consisting of two LTC2977 +in a single die. The chip is instantiated and reported as two separate chips +on two different I2C bus addresses. +LTC3880, LTC3882, LTC3886, and LTC3887 are dual output poly-phase step-down +DC/DC controllers. +LTC3883 is a single phase step-down DC/DC controller. +LTM2987 is a 16-channel Power System Manager with two LTC2977 plus +additional components on a single die. The chip is instantiated and reported +as two separate chips on two different I2C bus addresses. +LTM4675 is a dual 9A or single 18A μModule regulator +LTM4676 is a dual 13A or single 26A uModule regulator. Usage Notes @@ -61,26 +98,32 @@ in1_label "vin" in1_input Measured input voltage. in1_min Minimum input voltage. in1_max Maximum input voltage. - LTC2974, LTC2977, and LTC2978 only. + LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and + LTM2987 only. in1_lcrit Critical minimum input voltage. - LTC2974, LTC2977, and LTC2978 only. + LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and + LTM2987 only. in1_crit Critical maximum input voltage. in1_min_alarm Input voltage low alarm. in1_max_alarm Input voltage high alarm. - LTC2974, LTC2977, and LTC2978 only. + LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and + LTM2987 only. in1_lcrit_alarm Input voltage critical low alarm. - LTC2974, LTC2977, and LTC2978 only. + LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and + LTM2987 only. in1_crit_alarm Input voltage critical high alarm. in1_lowest Lowest input voltage. - LTC2974, LTC2977, and LTC2978 only. + LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and + LTM2987 only. in1_highest Highest input voltage. in1_reset_history Reset input voltage history. in[N]_label "vout[1-8]". - LTC2974: N=2-5 - LTC2977: N=2-9 + LTC2974, LTC2975: N=2-5 + LTC2977, LTC2980, LTM2987: N=2-9 LTC2978: N=2-9 - LTC3880, LTM4676: N=2-3 + LTC3880, LTC3882, LTC23886 LTC3887, LTM4675, LTM4676: + N=2-3 LTC3883: N=2 in[N]_input Measured output voltage. in[N]_min Minimum output voltage. @@ -91,67 +134,78 @@ in[N]_min_alarm Output voltage low alarm. in[N]_max_alarm Output voltage high alarm. in[N]_lcrit_alarm Output voltage critical low alarm. in[N]_crit_alarm Output voltage critical high alarm. -in[N]_lowest Lowest output voltage. LTC2974 and LTC2978 only. +in[N]_lowest Lowest output voltage. LTC2974, LTC2975, + and LTC2978 only. in[N]_highest Highest output voltage. in[N]_reset_history Reset output voltage history. temp[N]_input Measured temperature. - On LTC2974, temp[1-4] report external temperatures, - and temp5 reports the chip temperature. - On LTC2977 and LTC2978, only one temperature measurement - is supported and reports the chip temperature. - On LTC3880 and LTM4676, temp1 and temp2 report external - temperatures, and temp3 reports the chip temperature. + On LTC2974 and LTC2975, temp[1-4] report external + temperatures, and temp5 reports the chip temperature. + On LTC2977, LTC2980, LTC2978, and LTM2987, only one + temperature measurement is supported and reports + the chip temperature. + On LTC3880, LTC3882, LTC3887, LTM4675, and LTM4676, + temp1 and temp2 report external temperatures, and temp3 + reports the chip temperature. On LTC3883, temp1 reports an external temperature, and temp2 reports the chip temperature. -temp[N]_min Mimimum temperature. LTC2974, LCT2977, and LTC2978 only. +temp[N]_min Mimimum temperature. LTC2974, LCT2977, LTM2980, LTC2978, + and LTM2987 only. temp[N]_max Maximum temperature. temp[N]_lcrit Critical low temperature. temp[N]_crit Critical high temperature. temp[N]_min_alarm Temperature low alarm. - LTC2974, LTC2977, and LTC2978 only. + LTC2974, LTC2975, LTC2977, LTM2980, LTC2978, and + LTM2987 only. temp[N]_max_alarm Temperature high alarm. temp[N]_lcrit_alarm Temperature critical low alarm. temp[N]_crit_alarm Temperature critical high alarm. temp[N]_lowest Lowest measured temperature. - LTC2974, LTC2977, and LTC2978 only. - Not supported for chip temperature sensor on LTC2974. + LTC2974, LTC2975, LTC2977, LTM2980, LTC2978, and + LTM2987 only. + Not supported for chip temperature sensor on LTC2974 and + LTC2975. temp[N]_highest Highest measured temperature. Not supported for chip - temperature sensor on LTC2974. + temperature sensor on LTC2974 and LTC2975. temp[N]_reset_history Reset temperature history. Not supported for chip - temperature sensor on LTC2974. + temperature sensor on LTC2974 and LTC2975. -power1_label "pin". LTC3883 only. +power1_label "pin". LTC3883 and LTC3886 only. power1_input Measured input power. power[N]_label "pout[1-4]". - LTC2974: N=1-4 - LTC2977: Not supported + LTC2974, LTC2975: N=1-4 + LTC2977, LTC2980, LTM2987: Not supported LTC2978: Not supported - LTC3880, LTM4676: N=1-2 + LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676: + N=1-2 LTC3883: N=2 power[N]_input Measured output power. -curr1_label "iin". LTC3880, LTC3883, and LTM4676 only. +curr1_label "iin". LTC3880, LTC3883, LTC3886, LTC3887, LTM4675, + and LTM4676 only. curr1_input Measured input current. curr1_max Maximum input current. curr1_max_alarm Input current high alarm. -curr1_highest Highest input current. LTC3883 only. -curr1_reset_history Reset input current history. LTC3883 only. +curr1_highest Highest input current. LTC3883 and LTC3886 only. +curr1_reset_history Reset input current history. LTC3883 and LTC3886 only. curr[N]_label "iout[1-4]". - LTC2974: N=1-4 - LTC2977: not supported + LTC2974, LTC2975: N=1-4 + LTC2977, LTC2980, LTM2987: not supported LTC2978: not supported - LTC3880, LTM4676: N=2-3 + LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676: + N=2-3 LTC3883: N=2 curr[N]_input Measured output current. curr[N]_max Maximum output current. curr[N]_crit Critical high output current. -curr[N]_lcrit Critical low output current. LTC2974 only. +curr[N]_lcrit Critical low output current. LTC2974 and LTC2975 only. curr[N]_max_alarm Output current high alarm. curr[N]_crit_alarm Output current critical high alarm. -curr[N]_lcrit_alarm Output current critical low alarm. LTC2974 only. -curr[N]_lowest Lowest output current. LTC2974 only. +curr[N]_lcrit_alarm Output current critical low alarm. + LTC2974 and LTC2975 only. +curr[N]_lowest Lowest output current. LTC2974 and LTC2975 only. curr[N]_highest Highest output current. curr[N]_reset_history Reset output current history. diff --git a/Documentation/hwmon/max20751 b/Documentation/hwmon/max20751 new file mode 100644 index 000000000000..f9fa25ebb521 --- /dev/null +++ b/Documentation/hwmon/max20751 @@ -0,0 +1,77 @@ +Kernel driver max20751 +====================== + +Supported chips: + * maxim MAX20751 + Prefix: 'max20751' + Addresses scanned: - + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX20751.pdf + Application note: http://pdfserv.maximintegrated.com/en/an/AN5941.pdf + +Author: Guenter Roeck <linux@roeck-us.net> + + +Description +----------- + +This driver supports MAX20751 Multiphase Master with PMBus Interface +and Internal Buck Converter. + +The driver is a client driver to the core PMBus driver. +Please see Documentation/hwmon/pmbus for details on PMBus client drivers. + + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices for +details. + + +Platform data support +--------------------- + +The driver supports standard PMBus driver platform data. + + +Sysfs entries +------------- + +The following attributes are supported. + +in1_label "vin1" +in1_input Measured voltage. +in1_min Minimum input voltage. +in1_max Maximum input voltage. +in1_lcrit Critical minimum input voltage. +in1_crit Critical maximum input voltage. +in1_min_alarm Input voltage low alarm. +in1_lcrit_alarm Input voltage critical low alarm. +in1_min_alarm Input voltage low alarm. +in1_max_alarm Input voltage high alarm. + +in2_label "vout1" +in2_input Measured voltage. +in2_min Minimum output voltage. +in2_max Maximum output voltage. +in2_lcrit Critical minimum output voltage. +in2_crit Critical maximum output voltage. +in2_min_alarm Output voltage low alarm. +in2_lcrit_alarm Output voltage critical low alarm. +in2_min_alarm Output voltage low alarm. +in2_max_alarm Output voltage high alarm. + +curr1_input Measured output current. +curr1_label "iout1" +curr1_max Maximum output current. +curr1_alarm Current high alarm. + +temp1_input Measured temperature. +temp1_max Maximum temperature. +temp1_crit Critical high temperature. +temp1_max_alarm Chip temperature high alarm. +temp1_crit_alarm Chip temperature critical high alarm. + +power1_input Output power. +power1_label "pout1" diff --git a/Documentation/hwmon/nct7802 b/Documentation/hwmon/nct7802 index 2e00f5e344bc..5438deb6be02 100644 --- a/Documentation/hwmon/nct7802 +++ b/Documentation/hwmon/nct7802 @@ -17,8 +17,7 @@ This driver implements support for the Nuvoton NCT7802Y hardware monitoring chip. NCT7802Y supports 6 temperature sensors, 5 voltage sensors, and 3 fan speed sensors. -The chip also supports intelligent fan speed control. This functionality is -not currently supported by the driver. +Smart Fan™ speed control is available via pwmX_auto_point attributes. Tested Boards and BIOS Versions ------------------------------- diff --git a/Documentation/hwmon/nct7904 b/Documentation/hwmon/nct7904 index 014f112e2a14..57fffe33ebfc 100644 --- a/Documentation/hwmon/nct7904 +++ b/Documentation/hwmon/nct7904 @@ -35,11 +35,11 @@ temp1_input Local temperature (1/1000 degree, temp[2-9]_input CPU temperatures (1/1000 degree, 0.125 degree resolution) -fan[1-4]_mode R/W, 0/1 for manual or SmartFan mode +pwm[1-4]_enable R/W, 1/2 for manual or SmartFan mode Setting SmartFan mode is supported only if it has been previously configured by BIOS (or configuration EEPROM) -fan[1-4]_pwm R/O in SmartFan mode, R/W in manual control mode +pwm[1-4] R/O in SmartFan mode, R/W in manual control mode The driver checks sensor control registers and does not export the sensors that are not enabled. Anyway, a sensor that is enabled may actually be not diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus index a3557da8f5b4..b397675e876d 100644 --- a/Documentation/hwmon/pmbus +++ b/Documentation/hwmon/pmbus @@ -23,11 +23,15 @@ Supported chips: http://www.lineagepower.com/oem/pdf/PDT012A0X.pdf http://www.lineagepower.com/oem/pdf/UDT020A0X.pdf http://www.lineagepower.com/oem/pdf/MDT040A0X.pdf - * Texas Instruments TPS40400 - Prefixes: 'tps40400' + * Texas Instruments TPS40400, TPS544B20, TPS544B25, TPS544C20, TPS544C25 + Prefixes: 'tps40400', 'tps544b20', 'tps544b25', 'tps544c20', 'tps544c25' Addresses scanned: - Datasheets: http://www.ti.com/lit/gpn/tps40400 + http://www.ti.com/lit/gpn/tps544b20 + http://www.ti.com/lit/gpn/tps544b25 + http://www.ti.com/lit/gpn/tps544c20 + http://www.ti.com/lit/gpn/tps544c25 * Generic PMBus devices Prefix: 'pmbus' Addresses scanned: - diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt index c86f2f1ae4f6..1fec1135791d 100644 --- a/Documentation/input/alps.txt +++ b/Documentation/input/alps.txt @@ -119,8 +119,10 @@ ALPS Absolute Mode - Protocol Version 2 byte 5: 0 z6 z5 z4 z3 z2 z1 z0 Protocol Version 2 DualPoint devices send standard PS/2 mouse packets for -the DualPoint Stick. For non interleaved dualpoint devices the pointingstick -buttons get reported separately in the PSM, PSR and PSL bits. +the DualPoint Stick. The M, R and L bits signal the combined status of both +the pointingstick and touchpad buttons, except for Dell dualpoint devices +where the pointingstick buttons get reported separately in the PSM, PSR +and PSL bits. Dualpoint device -- interleaved packet format --------------------------------------------- diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 611c52267d24..141f847c7648 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -124,6 +124,8 @@ Code Seq#(hex) Include File Comments 'H' 00-7F linux/hiddev.h conflict! 'H' 00-0F linux/hidraw.h conflict! 'H' 01 linux/mei.h conflict! +'H' 02 linux/mei.h conflict! +'H' 03 linux/mei.h conflict! 'H' 00-0F sound/asound.h conflict! 'H' 20-40 sound/asound_fm.h conflict! 'H' 80-8F sound/sfnt_info.h conflict! diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index e63b446d973c..13f888a02a3d 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -952,6 +952,14 @@ When kbuild executes, the following steps are followed (roughly): $(KBUILD_ARFLAGS) set by the top level Makefile to "D" (deterministic mode) if this option is supported by $(AR). + ARCH_CPPFLAGS, ARCH_AFLAGS, ARCH_CFLAGS Overrides the kbuild defaults + + These variables are appended to the KBUILD_CPPFLAGS, + KBUILD_AFLAGS, and KBUILD_CFLAGS, respectively, after the + top-level Makefile has set any other flags. This provides a + means for an architecture to override the defaults. + + --- 6.2 Add prerequisites to archheaders: The archheaders: rule is used to generate header files that diff --git a/Documentation/misc-devices/mei/mei.txt b/Documentation/misc-devices/mei/mei.txt index 8d47501bba0a..91c1fa34f48b 100644 --- a/Documentation/misc-devices/mei/mei.txt +++ b/Documentation/misc-devices/mei/mei.txt @@ -96,7 +96,7 @@ A code snippet for an application communicating with Intel AMTHI client: IOCTL ===== -The Intel MEI Driver supports the following IOCTL command: +The Intel MEI Driver supports the following IOCTL commands: IOCTL_MEI_CONNECT_CLIENT Connect to firmware Feature (client). usage: @@ -125,6 +125,49 @@ The Intel MEI Driver supports the following IOCTL command: data that can be sent or received. (e.g. if MTU=2K, can send requests up to bytes 2k and received responses up to 2k bytes). + IOCTL_MEI_NOTIFY_SET: enable or disable event notifications + + Usage: + uint32_t enable; + ioctl(fd, IOCTL_MEI_NOTIFY_SET, &enable); + + Inputs: + uint32_t enable = 1; + or + uint32_t enable[disable] = 0; + + Error returns: + EINVAL Wrong IOCTL Number + ENODEV Device is not initialized or the client not connected + ENOMEM Unable to allocate memory to client internal data. + EFAULT Fatal Error (e.g. Unable to access user input data) + EOPNOTSUPP if the device doesn't support the feature + + Notes: + The client must be connected in order to enable notification events + + + IOCTL_MEI_NOTIFY_GET : retrieve event + + Usage: + uint32_t event; + ioctl(fd, IOCTL_MEI_NOTIFY_GET, &event); + + Outputs: + 1 - if an event is pending + 0 - if there is no even pending + + Error returns: + EINVAL Wrong IOCTL Number + ENODEV Device is not initialized or the client not connected + ENOMEM Unable to allocate memory to client internal data. + EFAULT Fatal Error (e.g. Unable to access user input data) + EOPNOTSUPP if the device doesn't support the feature + + Notes: + The client must be connected and event notification has to be enabled + in order to receive an event + Intel ME Applications ===================== diff --git a/Documentation/nvmem/nvmem.txt b/Documentation/nvmem/nvmem.txt new file mode 100644 index 000000000000..dbd40d879239 --- /dev/null +++ b/Documentation/nvmem/nvmem.txt @@ -0,0 +1,152 @@ + NVMEM SUBSYSTEM + Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +This document explains the NVMEM Framework along with the APIs provided, +and how to use it. + +1. Introduction +=============== +*NVMEM* is the abbreviation for Non Volatile Memory layer. It is used to +retrieve configuration of SOC or Device specific data from non volatile +memories like eeprom, efuses and so on. + +Before this framework existed, NVMEM drivers like eeprom were stored in +drivers/misc, where they all had to duplicate pretty much the same code to +register a sysfs file, allow in-kernel users to access the content of the +devices they were driving, etc. + +This was also a problem as far as other in-kernel users were involved, since +the solutions used were pretty much different from one driver to another, there +was a rather big abstraction leak. + +This framework aims at solve these problems. It also introduces DT +representation for consumer devices to go get the data they require (MAC +Addresses, SoC/Revision ID, part numbers, and so on) from the NVMEMs. This +framework is based on regmap, so that most of the abstraction available in +regmap can be reused, across multiple types of buses. + +NVMEM Providers ++++++++++++++++ + +NVMEM provider refers to an entity that implements methods to initialize, read +and write the non-volatile memory. + +2. Registering/Unregistering the NVMEM provider +=============================================== + +A NVMEM provider can register with NVMEM core by supplying relevant +nvmem configuration to nvmem_register(), on success core would return a valid +nvmem_device pointer. + +nvmem_unregister(nvmem) is used to unregister a previously registered provider. + +For example, a simple qfprom case: + +static struct nvmem_config econfig = { + .name = "qfprom", + .owner = THIS_MODULE, +}; + +static int qfprom_probe(struct platform_device *pdev) +{ + ... + econfig.dev = &pdev->dev; + nvmem = nvmem_register(&econfig); + ... +} + +It is mandatory that the NVMEM provider has a regmap associated with its +struct device. Failure to do would return error code from nvmem_register(). + +NVMEM Consumers ++++++++++++++++ + +NVMEM consumers are the entities which make use of the NVMEM provider to +read from and to NVMEM. + +3. NVMEM cell based consumer APIs +================================= + +NVMEM cells are the data entries/fields in the NVMEM. +The NVMEM framework provides 3 APIs to read/write NVMEM cells. + +struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *name); +struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, const char *name); + +void nvmem_cell_put(struct nvmem_cell *cell); +void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell); + +void *nvmem_cell_read(struct nvmem_cell *cell, ssize_t *len); +int nvmem_cell_write(struct nvmem_cell *cell, void *buf, ssize_t len); + +*nvmem_cell_get() apis will get a reference to nvmem cell for a given id, +and nvmem_cell_read/write() can then read or write to the cell. +Once the usage of the cell is finished the consumer should call *nvmem_cell_put() +to free all the allocation memory for the cell. + +4. Direct NVMEM device based consumer APIs +========================================== + +In some instances it is necessary to directly read/write the NVMEM. +To facilitate such consumers NVMEM framework provides below apis. + +struct nvmem_device *nvmem_device_get(struct device *dev, const char *name); +struct nvmem_device *devm_nvmem_device_get(struct device *dev, + const char *name); +void nvmem_device_put(struct nvmem_device *nvmem); +int nvmem_device_read(struct nvmem_device *nvmem, unsigned int offset, + size_t bytes, void *buf); +int nvmem_device_write(struct nvmem_device *nvmem, unsigned int offset, + size_t bytes, void *buf); +int nvmem_device_cell_read(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf); +int nvmem_device_cell_write(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf); + +Before the consumers can read/write NVMEM directly, it should get hold +of nvmem_controller from one of the *nvmem_device_get() api. + +The difference between these apis and cell based apis is that these apis always +take nvmem_device as parameter. + +5. Releasing a reference to the NVMEM +===================================== + +When a consumers no longer needs the NVMEM, it has to release the reference +to the NVMEM it has obtained using the APIs mentioned in the above section. +The NVMEM framework provides 2 APIs to release a reference to the NVMEM. + +void nvmem_cell_put(struct nvmem_cell *cell); +void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell); +void nvmem_device_put(struct nvmem_device *nvmem); +void devm_nvmem_device_put(struct device *dev, struct nvmem_device *nvmem); + +Both these APIs are used to release a reference to the NVMEM and +devm_nvmem_cell_put and devm_nvmem_device_put destroys the devres associated +with this NVMEM. + +Userspace ++++++++++ + +6. Userspace binary interface +============================== + +Userspace can read/write the raw NVMEM file located at +/sys/bus/nvmem/devices/*/nvmem + +ex: + +hexdump /sys/bus/nvmem/devices/qfprom0/nvmem + +0000000 0000 0000 0000 0000 0000 0000 0000 0000 +* +00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00 +0000000 0000 0000 0000 0000 0000 0000 0000 0000 +... +* +0001000 + +7. DeviceTree Binding +===================== + +See Documentation/devicetree/bindings/nvmem/nvmem.txt diff --git a/Documentation/power/suspend-and-cpuhotplug.txt b/Documentation/power/suspend-and-cpuhotplug.txt index 2850df3bf957..2fc909502db5 100644 --- a/Documentation/power/suspend-and-cpuhotplug.txt +++ b/Documentation/power/suspend-and-cpuhotplug.txt @@ -72,7 +72,7 @@ More details follow: | v Disable regular cpu hotplug - by setting cpu_hotplug_disabled=1 + by increasing cpu_hotplug_disabled | v Release cpu_add_remove_lock @@ -89,7 +89,7 @@ Resuming back is likewise, with the counterparts being (in the order of execution during resume): * enable_nonboot_cpus() which involves: | Acquire cpu_add_remove_lock - | Reset cpu_hotplug_disabled to 0, thereby enabling regular cpu hotplug + | Decrease cpu_hotplug_disabled, thereby enabling regular cpu hotplug | Call _cpu_up() [for all those cpus in the frozen_cpus mask, in a loop] | Release cpu_add_remove_lock v @@ -120,7 +120,7 @@ after the entire cycle is complete (i.e., suspend + resume). Acquire cpu_add_remove_lock | v - If cpu_hotplug_disabled is 1 + If cpu_hotplug_disabled > 0 return gracefully | | diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt index f732a8321e8a..8cc17ca71813 100644 --- a/Documentation/power/swsusp.txt +++ b/Documentation/power/swsusp.txt @@ -410,8 +410,17 @@ Documentation/usb/persist.txt. Q: Can I suspend-to-disk using a swap partition under LVM? -A: No. You can suspend successfully, but you'll not be able to -resume. uswsusp should be able to work with LVM. See suspend.sf.net. +A: Yes and No. You can suspend successfully, but the kernel will not be able +to resume on its own. You need an initramfs that can recognize the resume +situation, activate the logical volume containing the swap volume (but not +touch any filesystems!), and eventually call + +echo -n "$major:$minor" > /sys/power/resume + +where $major and $minor are the respective major and minor device numbers of +the swap volume. + +uswsusp works with LVM, too. See http://suspend.sourceforge.net/ Q: I upgraded the kernel from 2.6.15 to 2.6.16. Both kernels were compiled with the similar configuration files. Anyway I found that diff --git a/Documentation/s390/00-INDEX b/Documentation/s390/00-INDEX index 10c874ebdfe5..9189535f6cd2 100644 --- a/Documentation/s390/00-INDEX +++ b/Documentation/s390/00-INDEX @@ -16,8 +16,6 @@ Debugging390.txt - hints for debugging on s390 systems. driver-model.txt - information on s390 devices and the driver model. -kvm.txt - - ioctl calls to /dev/kvm on s390. monreader.txt - information on accessing the z/VM monitor stream from Linux. qeth.txt diff --git a/Documentation/s390/kvm.txt b/Documentation/s390/kvm.txt deleted file mode 100644 index 85f3280d7ef6..000000000000 --- a/Documentation/s390/kvm.txt +++ /dev/null @@ -1,125 +0,0 @@ -*** BIG FAT WARNING *** -The kvm module is currently in EXPERIMENTAL state for s390. This means that -the interface to the module is not yet considered to remain stable. Thus, be -prepared that we keep breaking your userspace application and guest -compatibility over and over again until we feel happy with the result. Make sure -your guest kernel, your host kernel, and your userspace launcher are in a -consistent state. - -This Documentation describes the unique ioctl calls to /dev/kvm, the resulting -kvm-vm file descriptors, and the kvm-vcpu file descriptors that differ from x86. - -1. ioctl calls to /dev/kvm -KVM does support the following ioctls on s390 that are common with other -architectures and do behave the same: -KVM_GET_API_VERSION -KVM_CREATE_VM (*) see note -KVM_CHECK_EXTENSION -KVM_GET_VCPU_MMAP_SIZE - -Notes: -* KVM_CREATE_VM may fail on s390, if the calling process has multiple -threads and has not called KVM_S390_ENABLE_SIE before. - -In addition, on s390 the following architecture specific ioctls are supported: -ioctl: KVM_S390_ENABLE_SIE -args: none -see also: include/linux/kvm.h -This call causes the kernel to switch on PGSTE in the user page table. This -operation is needed in order to run a virtual machine, and it requires the -calling process to be single-threaded. Note that the first call to KVM_CREATE_VM -will implicitly try to switch on PGSTE if the user process has not called -KVM_S390_ENABLE_SIE before. User processes that want to launch multiple threads -before creating a virtual machine have to call KVM_S390_ENABLE_SIE, or will -observe an error calling KVM_CREATE_VM. Switching on PGSTE is a one-time -operation, is not reversible, and will persist over the entire lifetime of -the calling process. It does not have any user-visible effect other than a small -performance penalty. - -2. ioctl calls to the kvm-vm file descriptor -KVM does support the following ioctls on s390 that are common with other -architectures and do behave the same: -KVM_CREATE_VCPU -KVM_SET_USER_MEMORY_REGION (*) see note -KVM_GET_DIRTY_LOG (**) see note - -Notes: -* kvm does only allow exactly one memory slot on s390, which has to start - at guest absolute address zero and at a user address that is aligned on any - page boundary. This hardware "limitation" allows us to have a few unique - optimizations. The memory slot doesn't have to be filled - with memory actually, it may contain sparse holes. That said, with different - user memory layout this does still allow a large flexibility when - doing the guest memory setup. -** KVM_GET_DIRTY_LOG doesn't work properly yet. The user will receive an empty -log. This ioctl call is only needed for guest migration, and we intend to -implement this one in the future. - -In addition, on s390 the following architecture specific ioctls for the kvm-vm -file descriptor are supported: -ioctl: KVM_S390_INTERRUPT -args: struct kvm_s390_interrupt * -see also: include/linux/kvm.h -This ioctl is used to submit a floating interrupt for a virtual machine. -Floating interrupts may be delivered to any virtual cpu in the configuration. -Only some interrupt types defined in include/linux/kvm.h make sense when -submitted as floating interrupts. The following interrupts are not considered -to be useful as floating interrupts, and a call to inject them will result in --EINVAL error code: program interrupts and interprocessor signals. Valid -floating interrupts are: -KVM_S390_INT_VIRTIO -KVM_S390_INT_SERVICE - -3. ioctl calls to the kvm-vcpu file descriptor -KVM does support the following ioctls on s390 that are common with other -architectures and do behave the same: -KVM_RUN -KVM_GET_REGS -KVM_SET_REGS -KVM_GET_SREGS -KVM_SET_SREGS -KVM_GET_FPU -KVM_SET_FPU - -In addition, on s390 the following architecture specific ioctls for the -kvm-vcpu file descriptor are supported: -ioctl: KVM_S390_INTERRUPT -args: struct kvm_s390_interrupt * -see also: include/linux/kvm.h -This ioctl is used to submit an interrupt for a specific virtual cpu. -Only some interrupt types defined in include/linux/kvm.h make sense when -submitted for a specific cpu. The following interrupts are not considered -to be useful, and a call to inject them will result in -EINVAL error code: -service processor calls and virtio interrupts. Valid interrupt types are: -KVM_S390_PROGRAM_INT -KVM_S390_SIGP_STOP -KVM_S390_RESTART -KVM_S390_SIGP_SET_PREFIX -KVM_S390_INT_EMERGENCY - -ioctl: KVM_S390_STORE_STATUS -args: unsigned long -see also: include/linux/kvm.h -This ioctl stores the state of the cpu at the guest real address given as -argument, unless one of the following values defined in include/linux/kvm.h -is given as argument: -KVM_S390_STORE_STATUS_NOADDR - the CPU stores its status to the save area in -absolute lowcore as defined by the principles of operation -KVM_S390_STORE_STATUS_PREFIXED - the CPU stores its status to the save area in -its prefix page just like the dump tool that comes with zipl. This is useful -to create a system dump for use with lkcdutils or crash. - -ioctl: KVM_S390_SET_INITIAL_PSW -args: struct kvm_s390_psw * -see also: include/linux/kvm.h -This ioctl can be used to set the processor status word (psw) of a stopped cpu -prior to running it with KVM_RUN. Note that this call is not required to modify -the psw during sie intercepts that fall back to userspace because struct kvm_run -does contain the psw, and this value is evaluated during reentry of KVM_RUN -after the intercept exit was recognized. - -ioctl: KVM_S390_INITIAL_RESET -args: none -see also: include/linux/kvm.h -This ioctl can be used to perform an initial cpu reset as defined by the -principles of operation. The target cpu has to be in stopped state. diff --git a/Documentation/target/tcm_mod_builder.py b/Documentation/target/tcm_mod_builder.py index 949de191fcdc..cda56df9b8a7 100755 --- a/Documentation/target/tcm_mod_builder.py +++ b/Documentation/target/tcm_mod_builder.py @@ -199,7 +199,8 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += "#include <linux/string.h>\n" buf += "#include <linux/configfs.h>\n" buf += "#include <linux/ctype.h>\n" - buf += "#include <asm/unaligned.h>\n\n" + buf += "#include <asm/unaligned.h>\n" + buf += "#include <scsi/scsi_proto.h>\n\n" buf += "#include <target/target_core_base.h>\n" buf += "#include <target/target_core_fabric.h>\n" buf += "#include <target/target_core_fabric_configfs.h>\n" @@ -230,8 +231,14 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " }\n" buf += " tpg->" + fabric_mod_port + " = " + fabric_mod_port + ";\n" buf += " tpg->" + fabric_mod_port + "_tpgt = tpgt;\n\n" - buf += " ret = core_tpg_register(&" + fabric_mod_name + "_ops, wwn,\n" - buf += " &tpg->se_tpg, SCSI_PROTOCOL_SAS);\n" + + if proto_ident == "FC": + buf += " ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_FCP);\n" + elif proto_ident == "SAS": + buf += " ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_SAS);\n" + elif proto_ident == "iSCSI": + buf += " ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_ISCSI);\n" + buf += " if (ret < 0) {\n" buf += " kfree(tpg);\n" buf += " return NULL;\n" @@ -292,7 +299,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += "static const struct target_core_fabric_ops " + fabric_mod_name + "_ops = {\n" buf += " .module = THIS_MODULE,\n" - buf += " .name = " + fabric_mod_name + ",\n" + buf += " .name = \"" + fabric_mod_name + "\",\n" buf += " .get_fabric_name = " + fabric_mod_name + "_get_fabric_name,\n" buf += " .tpg_get_wwn = " + fabric_mod_name + "_get_fabric_wwn,\n" buf += " .tpg_get_tag = " + fabric_mod_name + "_get_tag,\n" @@ -322,17 +329,17 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " .fabric_make_tpg = " + fabric_mod_name + "_make_tpg,\n" buf += " .fabric_drop_tpg = " + fabric_mod_name + "_drop_tpg,\n" buf += "\n" - buf += " .tfc_wwn_attrs = " + fabric_mod_name + "_wwn_attrs;\n" + buf += " .tfc_wwn_attrs = " + fabric_mod_name + "_wwn_attrs,\n" buf += "};\n\n" buf += "static int __init " + fabric_mod_name + "_init(void)\n" buf += "{\n" - buf += " return target_register_template(" + fabric_mod_name + "_ops);\n" + buf += " return target_register_template(&" + fabric_mod_name + "_ops);\n" buf += "};\n\n" buf += "static void __exit " + fabric_mod_name + "_exit(void)\n" buf += "{\n" - buf += " target_unregister_template(" + fabric_mod_name + "_ops);\n" + buf += " target_unregister_template(&" + fabric_mod_name + "_ops);\n" buf += "};\n\n" buf += "MODULE_DESCRIPTION(\"" + fabric_mod_name.upper() + " series fabric driver\");\n" diff --git a/Documentation/trace/coresight.txt b/Documentation/trace/coresight.txt index 77d14d51a670..0a5c3290e732 100644 --- a/Documentation/trace/coresight.txt +++ b/Documentation/trace/coresight.txt @@ -15,7 +15,7 @@ HW assisted tracing is becoming increasingly useful when dealing with systems that have many SoCs and other components like GPU and DMA engines. ARM has developed a HW assisted tracing solution by means of different components, each being added to a design at synthesis time to cater to specific tracing needs. -Compoments are generally categorised as source, link and sinks and are +Components are generally categorised as source, link and sinks and are (usually) discovered using the AMBA bus. "Sources" generate a compressed stream representing the processor instruction @@ -138,7 +138,7 @@ void coresight_unregister(struct coresight_device *csdev); The registering function is taking a "struct coresight_device *csdev" and register the device with the core framework. The unregister function takes -a reference to a "strut coresight_device", obtained at registration time. +a reference to a "struct coresight_device", obtained at registration time. If everything goes well during the registration process the new devices will show up under /sys/bus/coresight/devices, as showns here for a TC2 platform: diff --git a/Documentation/usb/gadget-testing.txt b/Documentation/usb/gadget-testing.txt index 592678009c15..b24d3ef89166 100644 --- a/Documentation/usb/gadget-testing.txt +++ b/Documentation/usb/gadget-testing.txt @@ -237,9 +237,7 @@ Testing the LOOPBACK function ----------------------------- device: run the gadget -host: test-usb - -http://www.linux-usb.org/usbtest/testusb.c +host: test-usb (tools/usb/testusb.c) 8. MASS STORAGE function ======================== @@ -586,9 +584,8 @@ Testing the SOURCESINK function ------------------------------- device: run the gadget -host: test-usb +host: test-usb (tools/usb/testusb.c) -http://www.linux-usb.org/usbtest/testusb.c 16. UAC1 function ================= diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt index b5f83911732a..4a15c90bc11d 100644 --- a/Documentation/usb/power-management.txt +++ b/Documentation/usb/power-management.txt @@ -521,10 +521,10 @@ enabling hardware LPM, the host can automatically put the device into lower power state(L1 for usb2.0 devices, or U1/U2 for usb3.0 devices), which state device can enter and resume very quickly. -The user interface for controlling USB2 hardware LPM is located in the +The user interface for controlling hardware LPM is located in the power/ subdirectory of each USB device's sysfs directory, that is, in /sys/bus/usb/devices/.../power/ where "..." is the device's ID. The -relevant attribute files is usb2_hardware_lpm. +relevant attribute files are usb2_hardware_lpm and usb3_hardware_lpm. power/usb2_hardware_lpm @@ -537,6 +537,17 @@ relevant attribute files is usb2_hardware_lpm. can write y/Y/1 or n/N/0 to the file to enable/disable USB2 hardware LPM manually. This is for test purpose mainly. + power/usb3_hardware_lpm + + When a USB 3.0 lpm-capable device is plugged in to a + xHCI host which supports link PM, it will check if U1 + and U2 exit latencies have been set in the BOS + descriptor; if the check is is passed and the host + supports USB3 hardware LPM, USB3 hardware LPM will be + enabled for the device and this file will be created. + The file holds a string value (enable or disable) + indicating whether or not USB3 hardware LPM is + enabled for the device. USB Port Power Control ---------------------- diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index a7926a90156f..a4ebcb712375 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -3277,6 +3277,7 @@ should put the acknowledged interrupt vector into the 'epr' field. struct { #define KVM_SYSTEM_EVENT_SHUTDOWN 1 #define KVM_SYSTEM_EVENT_RESET 2 +#define KVM_SYSTEM_EVENT_CRASH 3 __u32 type; __u64 flags; } system_event; @@ -3296,6 +3297,10 @@ Valid values for 'type' are: KVM_SYSTEM_EVENT_RESET -- the guest has requested a reset of the VM. As with SHUTDOWN, userspace can choose to ignore the request, or to schedule the reset to occur in the future and may call KVM_RUN again. + KVM_SYSTEM_EVENT_CRASH -- the guest crash occurred and the guest + has requested a crash condition maintenance. Userspace can choose + to ignore the request, or to gather VM memory core dump and/or + reset/shutdown of the VM. /* Fix the size of the union. */ char padding[256]; |