diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/DocBook/Makefile | 8 | ||||
| -rw-r--r-- | Documentation/kbuild/makefiles.txt | 172 | ||||
| -rw-r--r-- | Documentation/kbuild/modules.txt | 98 | ||||
| -rw-r--r-- | Documentation/smart-config.txt | 4 |
4 files changed, 198 insertions, 84 deletions
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 2975291e296a..7d87dd73cbe4 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -28,7 +28,7 @@ PS_METHOD = $(prefer-db2x) ### # The targets that may be used. -.PHONY: xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs +PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs BOOKS := $(addprefix $(obj)/,$(DOCBOOKS)) xmldocs: $(BOOKS) @@ -211,3 +211,9 @@ clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) #man put files in man subdir - traverse down subdir- := man/ + + +# Declare the contents of the .PHONY variable as phony. We keep that +# information in a variable se we can use it in if_changed and friends. + +.PHONY: $(PHONY) diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index 443230b43e09..a9c00facdf40 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -17,6 +17,7 @@ This document describes the Linux kernel Makefiles. --- 3.8 Command line dependency --- 3.9 Dependency tracking --- 3.10 Special Rules + --- 3.11 $(CC) support functions === 4 Host Program support --- 4.1 Simple Host Program @@ -38,7 +39,6 @@ This document describes the Linux kernel Makefiles. --- 6.6 Commands useful for building a boot image --- 6.7 Custom kbuild commands --- 6.8 Preprocessing linker scripts - --- 6.9 $(CC) support functions === 7 Kbuild Variables === 8 Makefile language @@ -106,9 +106,9 @@ This document is aimed towards normal developers and arch developers. Most Makefiles within the kernel are kbuild Makefiles that use the kbuild infrastructure. This chapter introduce the syntax used in the kbuild makefiles. -The preferred name for the kbuild files is 'Kbuild' but 'Makefile' will -continue to be supported. All new developmen is expected to use the -Kbuild filename. +The preferred name for the kbuild files are 'Makefile' but 'Kbuild' can +be used and if both a 'Makefile' and a 'Kbuild' file exists then the 'Kbuild' +file will be used. Section 3.1 "Goal definitions" is a quick intro, further chapters provide more details, with real examples. @@ -385,6 +385,102 @@ more details, with real examples. to prerequisites are referenced with $(src) (because they are not generated files). +--- 3.11 $(CC) support functions + + The kernel may be build with several different versions of + $(CC), each supporting a unique set of features and options. + kbuild provide basic support to check for valid options for $(CC). + $(CC) is useally the gcc compiler, but other alternatives are + available. + + as-option + as-option is used to check if $(CC) when used to compile + assembler (*.S) files supports the given option. An optional + second option may be specified if first option are not supported. + + Example: + #arch/sh/Makefile + cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),) + + In the above example cflags-y will be assinged the the option + -Wa$(comma)-isa=$(isa-y) if it is supported by $(CC). + The second argument is optional, and if supplied will be used + if first argument is not supported. + + cc-option + cc-option is used to check if $(CC) support a given option, and not + supported to use an optional second option. + + Example: + #arch/i386/Makefile + cflags-y += $(call cc-option,-march=pentium-mmx,-march=i586) + + In the above example cflags-y will be assigned the option + -march=pentium-mmx if supported by $(CC), otherwise -march-i586. + The second argument to cc-option is optional, and if omitted + cflags-y will be assigned no value if first option is not supported. + + cc-option-yn + cc-option-yn is used to check if gcc supports a given option + and return 'y' if supported, otherwise 'n'. + + Example: + #arch/ppc/Makefile + biarch := $(call cc-option-yn, -m32) + aflags-$(biarch) += -a32 + cflags-$(biarch) += -m32 + + In the above example $(biarch) is set to y if $(CC) supports the -m32 + option. When $(biarch) equals to y the expanded variables $(aflags-y) + and $(cflags-y) will be assigned the values -a32 and -m32. + + cc-option-align + gcc version >= 3.0 shifted type of options used to speify + alignment of functions, loops etc. $(cc-option-align) whrn used + as prefix to the align options will select the right prefix: + gcc < 3.00 + cc-option-align = -malign + gcc >= 3.00 + cc-option-align = -falign + + Example: + CFLAGS += $(cc-option-align)-functions=4 + + In the above example the option -falign-functions=4 is used for + gcc >= 3.00. For gcc < 3.00 -malign-functions=4 is used. + + cc-version + cc-version return a numerical version of the $(CC) compiler version. + The format is <major><minor> where both are two digits. So for example + gcc 3.41 would return 0341. + cc-version is useful when a specific $(CC) version is faulty in one + area, for example the -mregparm=3 were broken in some gcc version + even though the option was accepted by gcc. + + Example: + #arch/i386/Makefile + cflags-y += $(shell \ + if [ $(call cc-version) -ge 0300 ] ; then \ + echo "-mregparm=3"; fi ;) + + In the above example -mregparm=3 is only used for gcc version greater + than or equal to gcc 3.0. + + cc-ifversion + cc-ifversion test the version of $(CC) and equals last argument if + version expression is true. + + Example: + #fs/reiserfs/Makefile + EXTRA_CFLAGS := $(call cc-ifversion, -lt, 0402, -O1) + + In this example EXTRA_CFLAGS will be assigned the value -O1 if the + $(CC) version is less than 4.2. + cc-ifversion takes all the shell operators: + -eq, -ne, -lt, -le, -gt, and -ge + The third parameter may be a text as in this example, but it may also + be an expanded variable or a macro. + === 4 Host Program support @@ -973,74 +1069,6 @@ When kbuild executes the following steps are followed (roughly): architecture specific files. ---- 6.9 $(CC) support functions - - The kernel may be build with several different versions of - $(CC), each supporting a unique set of features and options. - kbuild provide basic support to check for valid options for $(CC). - $(CC) is useally the gcc compiler, but other alternatives are - available. - - cc-option - cc-option is used to check if $(CC) support a given option, and not - supported to use an optional second option. - - Example: - #arch/i386/Makefile - cflags-y += $(call cc-option,-march=pentium-mmx,-march=i586) - - In the above example cflags-y will be assigned the option - -march=pentium-mmx if supported by $(CC), otherwise -march-i586. - The second argument to cc-option is optional, and if omitted - cflags-y will be assigned no value if first option is not supported. - - cc-option-yn - cc-option-yn is used to check if gcc supports a given option - and return 'y' if supported, otherwise 'n'. - - Example: - #arch/ppc/Makefile - biarch := $(call cc-option-yn, -m32) - aflags-$(biarch) += -a32 - cflags-$(biarch) += -m32 - - In the above example $(biarch) is set to y if $(CC) supports the -m32 - option. When $(biarch) equals to y the expanded variables $(aflags-y) - and $(cflags-y) will be assigned the values -a32 and -m32. - - cc-option-align - gcc version >= 3.0 shifted type of options used to speify - alignment of functions, loops etc. $(cc-option-align) whrn used - as prefix to the align options will select the right prefix: - gcc < 3.00 - cc-option-align = -malign - gcc >= 3.00 - cc-option-align = -falign - - Example: - CFLAGS += $(cc-option-align)-functions=4 - - In the above example the option -falign-functions=4 is used for - gcc >= 3.00. For gcc < 3.00 -malign-functions=4 is used. - - cc-version - cc-version return a numerical version of the $(CC) compiler version. - The format is <major><minor> where both are two digits. So for example - gcc 3.41 would return 0341. - cc-version is useful when a specific $(CC) version is faulty in one - area, for example the -mregparm=3 were broken in some gcc version - even though the option was accepted by gcc. - - Example: - #arch/i386/Makefile - cflags-y += $(shell \ - if [ $(call cc-version) -ge 0300 ] ; then \ - echo "-mregparm=3"; fi ;) - - In the above example -mregparm=3 is only used for gcc version greater - than or equal to gcc 3.0. - - === 7 Kbuild Variables The top Makefile exports the following variables: diff --git a/Documentation/kbuild/modules.txt b/Documentation/kbuild/modules.txt index 7e77f93634ea..fcccf2432f98 100644 --- a/Documentation/kbuild/modules.txt +++ b/Documentation/kbuild/modules.txt @@ -13,6 +13,7 @@ In this document you will find information about: --- 2.2 Available targets --- 2.3 Available options --- 2.4 Preparing the kernel tree for module build + --- 2.5 Building separate files for a module === 3. Example commands === 4. Creating a kbuild file for an external module === 5. Include files @@ -22,7 +23,10 @@ In this document you will find information about: === 6. Module installation --- 6.1 INSTALL_MOD_PATH --- 6.2 INSTALL_MOD_DIR - === 7. Module versioning + === 7. Module versioning & Module.symvers + --- 7.1 Symbols fron the kernel (vmlinux + modules) + --- 7.2 Symbols and external modules + --- 7.3 Symbols from another external module === 8. Tips & Tricks --- 8.1 Testing for CONFIG_FOO_BAR @@ -88,7 +92,8 @@ when building an external module. make -C $KDIR M=$PWD modules_install Install the external module(s). Installation default is in /lib/modules/<kernel-version>/extra, - but may be prefixed with INSTALL_MOD_PATH - see separate chapter. + but may be prefixed with INSTALL_MOD_PATH - see separate + chapter. make -C $KDIR M=$PWD clean Remove all generated files for the module - the kernel @@ -131,6 +136,16 @@ when building an external module. Therefore a full kernel build needs to be executed to make module versioning work. +--- 2.5 Building separate files for a module + It is possible to build single files which is part of a module. + This works equal for the kernel, a module and even for external + modules. + Examples (module foo.ko, consist of bar.o, baz.o): + make -C $KDIR M=`pwd` bar.lst + make -C $KDIR M=`pwd` bar.o + make -C $KDIR M=`pwd` foo.ko + make -C $KDIR M=`pwd` / + === 3. Example commands @@ -422,7 +437,7 @@ External modules are installed in the directory: => Install dir: /lib/modules/$(KERNELRELEASE)/gandalf -=== 7. Module versioning +=== 7. Module versioning & Module.symvers Module versioning is enabled by the CONFIG_MODVERSIONS tag. @@ -432,11 +447,80 @@ when a module is loaded/used then the CRC values contained in the kernel are compared with similar values in the module. If they are not equal then the kernel refuses to load the module. -During a kernel build a file named Module.symvers will be generated. This -file includes the symbol version of all symbols within the kernel. If the -Module.symvers file is saved from the last full kernel compile one does not -have to do a full kernel compile to build a module version's compatible module. +Module.symvers contains a list of all exported symbols from a kernel build. + +--- 7.1 Symbols fron the kernel (vmlinux + modules) + + During a kernel build a file named Module.symvers will be generated. + Module.symvers contains all exported symbols from the kernel and + compiled modules. For each symbols the corresponding CRC value + is stored too. + + The syntax of the Module.symvers file is: + <CRC> <Symbol> <module> + Sample: + 0x2d036834 scsi_remove_host drivers/scsi/scsi_mod + For a kernel build without CONFIG_MODVERSIONING enabled the crc + would read: 0x00000000 + + Module.symvers serve two purposes. + 1) It list all exported symbols both from vmlinux and all modules + 2) It list CRC if CONFIG_MODVERSION is enabled + +--- 7.2 Symbols and external modules + + When building an external module the build system needs access to + the symbols from the kernel to check if all external symbols are + defined. This is done in the MODPOST step and to obtain all + symbols modpost reads Module.symvers from the kernel. + If a Module.symvers file is present in the directory where + the external module is being build this file will be read too. + During the MODPOST step a new Module.symvers file will be written + containing all exported symbols that was not defined in the kernel. + +--- 7.3 Symbols from another external module + + Sometimes one external module uses exported symbols from another + external module. Kbuild needs to have full knowledge on all symbols + to avoid spitting out warnings about undefined symbols. + Two solutions exist to let kbuild know all symbols of more than + one external module. + The method with a top-level kbuild file is recommended but may be + impractical in certain situations. + + Use a top-level Kbuild file + If you have two modules: 'foo', 'bar' and 'foo' needs symbols + from 'bar' then one can use a common top-level kbuild file so + both modules are compiled in same build. + + Consider following directory layout: + ./foo/ <= contains the foo module + ./bar/ <= contains the bar module + The top-level Kbuild file would then look like: + + #./Kbuild: (this file may also be named Makefile) + obj-y := foo/ bar/ + + Executing: + make -C $KDIR M=`pwd` + + will then do the expected and compile both modules with full + knowledge on symbols from both modules. + + Use an extra Module.symvers file + When an external module is build a Module.symvers file is + generated containing all exported symbols which are not + defined in the kernel. + To get access to symbols from module 'bar' one can copy the + Module.symvers file from the compilation of the 'bar' module + to the directory where the 'foo' module is build. + During the module build kbuild will read the Module.symvers + file in the directory of the external module and when the + build is finished a new Module.symvers file is created + containing the sum of all symbols defined and not part of the + kernel. + === 8. Tips & Tricks --- 8.1 Testing for CONFIG_FOO_BAR diff --git a/Documentation/smart-config.txt b/Documentation/smart-config.txt index c9bed4cf8773..8467447b5a87 100644 --- a/Documentation/smart-config.txt +++ b/Documentation/smart-config.txt @@ -56,10 +56,6 @@ Here is the solution: writing one file per option. It updates only the files for options that have changed. - mkdep.c no longer generates warning messages for missing or unneeded - <linux/config.h> lines. The new top-level target 'make checkconfig' - checks for these problems. - Flag Dependencies Martin Von Loewis contributed another feature to this patch: |