diff options
Diffstat (limited to 'Documentation')
20 files changed, 278 insertions, 406 deletions
diff --git a/Documentation/ABI/testing/sysfs-devices-edac b/Documentation/ABI/testing/sysfs-devices-edac index 30ee78aaed75..6568e0010e1a 100644 --- a/Documentation/ABI/testing/sysfs-devices-edac +++ b/Documentation/ABI/testing/sysfs-devices-edac @@ -77,7 +77,7 @@ Description: Read/Write attribute file that controls memory scrubbing. What: /sys/devices/system/edac/mc/mc*/max_location Date: April 2012 -Contact: Mauro Carvalho Chehab <mchehab@redhat.com> +Contact: Mauro Carvalho Chehab <m.chehab@samsung.com> linux-edac@vger.kernel.org Description: This attribute file displays the information about the last available memory slot in this memory controller. It is used by @@ -85,7 +85,7 @@ Description: This attribute file displays the information about the last What: /sys/devices/system/edac/mc/mc*/(dimm|rank)*/size Date: April 2012 -Contact: Mauro Carvalho Chehab <mchehab@redhat.com> +Contact: Mauro Carvalho Chehab <m.chehab@samsung.com> linux-edac@vger.kernel.org Description: This attribute file will display the size of dimm or rank. For dimm*/size, this is the size, in MB of the DIMM memory @@ -96,14 +96,14 @@ Description: This attribute file will display the size of dimm or rank. What: /sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_dev_type Date: April 2012 -Contact: Mauro Carvalho Chehab <mchehab@redhat.com> +Contact: Mauro Carvalho Chehab <m.chehab@samsung.com> linux-edac@vger.kernel.org Description: This attribute file will display what type of DRAM device is being utilized on this DIMM (x1, x2, x4, x8, ...). What: /sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_edac_mode Date: April 2012 -Contact: Mauro Carvalho Chehab <mchehab@redhat.com> +Contact: Mauro Carvalho Chehab <m.chehab@samsung.com> linux-edac@vger.kernel.org Description: This attribute file will display what type of Error detection and correction is being utilized. For example: S4ECD4ED would @@ -111,7 +111,7 @@ Description: This attribute file will display what type of Error detection What: /sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_label Date: April 2012 -Contact: Mauro Carvalho Chehab <mchehab@redhat.com> +Contact: Mauro Carvalho Chehab <m.chehab@samsung.com> linux-edac@vger.kernel.org Description: This control file allows this DIMM to have a label assigned to it. With this label in the module, when errors occur @@ -126,14 +126,14 @@ Description: This control file allows this DIMM to have a label assigned What: /sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_location Date: April 2012 -Contact: Mauro Carvalho Chehab <mchehab@redhat.com> +Contact: Mauro Carvalho Chehab <m.chehab@samsung.com> linux-edac@vger.kernel.org Description: This attribute file will display the location (csrow/channel, branch/channel/slot or channel/slot) of the dimm or rank. What: /sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_mem_type Date: April 2012 -Contact: Mauro Carvalho Chehab <mchehab@redhat.com> +Contact: Mauro Carvalho Chehab <m.chehab@samsung.com> linux-edac@vger.kernel.org Description: This attribute file will display what type of memory is currently on this csrow. Normally, either buffered or diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index f43542ae2981..0c7195e3e093 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -2254,7 +2254,7 @@ video encoding.</para> <orderedlist> <listitem> <para>The <constant>VIDIOC_G_CHIP_IDENT</constant> ioctl was renamed -to <constant>VIDIOC_G_CHIP_IDENT_OLD</constant> and &VIDIOC-DBG-G-CHIP-IDENT; +to <constant>VIDIOC_G_CHIP_IDENT_OLD</constant> and <constant>VIDIOC_DBG_G_CHIP_IDENT</constant> was introduced in its place. The old struct <structname>v4l2_chip_ident</structname> was renamed to <structname id="v4l2-chip-ident-old">v4l2_chip_ident_old</structname>.</para> </listitem> @@ -2513,6 +2513,16 @@ that used it. It was originally scheduled for removal in 2.6.35. </orderedlist> </section> + <section> + <title>V4L2 in Linux 3.11</title> + <orderedlist> + <listitem> + <para>Remove obsolete <constant>VIDIOC_DBG_G_CHIP_IDENT</constant> ioctl. + </para> + </listitem> + </orderedlist> + </section> + <section id="other"> <title>Relation of V4L2 to other Linux multimedia APIs</title> @@ -2596,7 +2606,7 @@ and may change in the future.</para> ioctls.</para> </listitem> <listitem> - <para>&VIDIOC-DBG-G-CHIP-IDENT; ioctl.</para> + <para>&VIDIOC-DBG-G-CHIP-INFO; ioctl.</para> </listitem> <listitem> <para>&VIDIOC-ENUM-DV-TIMINGS;, &VIDIOC-QUERY-DV-TIMINGS; and diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index bfe823dd0f31..8469fe13945c 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -141,6 +141,14 @@ structs, ioctls) must be noted in more detail in the history chapter applications. --> <revision> + <revnumber>3.11</revnumber> + <date>2013-05-26</date> + <authorinitials>hv</authorinitials> + <revremark>Remove obsolete VIDIOC_DBG_G_CHIP_IDENT ioctl. + </revremark> + </revision> + + <revision> <revnumber>3.10</revnumber> <date>2013-03-25</date> <authorinitials>hv</authorinitials> @@ -493,7 +501,7 @@ and discussions on the V4L mailing list.</revremark> </partinfo> <title>Video for Linux Two API Specification</title> - <subtitle>Revision 3.10</subtitle> + <subtitle>Revision 3.11</subtitle> <chapter id="common"> &sub-common; @@ -547,7 +555,6 @@ and discussions on the V4L mailing list.</revremark> <!-- All ioctls go here. --> &sub-create-bufs; &sub-cropcap; - &sub-dbg-g-chip-ident; &sub-dbg-g-chip-info; &sub-dbg-g-register; &sub-decoder-cmd; diff --git a/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-ident.xml b/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-ident.xml deleted file mode 100644 index 921e18550d26..000000000000 --- a/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-ident.xml +++ /dev/null @@ -1,271 +0,0 @@ -<refentry id="vidioc-dbg-g-chip-ident"> - <refmeta> - <refentrytitle>ioctl VIDIOC_DBG_G_CHIP_IDENT</refentrytitle> - &manvol; - </refmeta> - - <refnamediv> - <refname>VIDIOC_DBG_G_CHIP_IDENT</refname> - <refpurpose>Identify the chips on a TV card</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcprototype> - <funcdef>int <function>ioctl</function></funcdef> - <paramdef>int <parameter>fd</parameter></paramdef> - <paramdef>int <parameter>request</parameter></paramdef> - <paramdef>struct v4l2_dbg_chip_ident -*<parameter>argp</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Arguments</title> - - <variablelist> - <varlistentry> - <term><parameter>fd</parameter></term> - <listitem> - <para>&fd;</para> - </listitem> - </varlistentry> - <varlistentry> - <term><parameter>request</parameter></term> - <listitem> - <para>VIDIOC_DBG_G_CHIP_IDENT</para> - </listitem> - </varlistentry> - <varlistentry> - <term><parameter>argp</parameter></term> - <listitem> - <para></para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Description</title> - - <note> - <title>Experimental</title> - - <para>This is an <link -linkend="experimental">experimental</link> interface and may change in -the future.</para> - </note> - - <para>For driver debugging purposes this ioctl allows test -applications to query the driver about the chips present on the TV -card. Regular applications must not use it. When you found a chip -specific bug, please contact the linux-media mailing list (&v4l-ml;) -so it can be fixed.</para> - - <para>To query the driver applications must initialize the -<structfield>match.type</structfield> and -<structfield>match.addr</structfield> or <structfield>match.name</structfield> -fields of a &v4l2-dbg-chip-ident; -and call <constant>VIDIOC_DBG_G_CHIP_IDENT</constant> with a pointer to -this structure. On success the driver stores information about the -selected chip in the <structfield>ident</structfield> and -<structfield>revision</structfield> fields. On failure the structure -remains unchanged.</para> - - <para>When <structfield>match.type</structfield> is -<constant>V4L2_CHIP_MATCH_HOST</constant>, -<structfield>match.addr</structfield> selects the nth non-&i2c; chip -on the TV card. You can enumerate all chips by starting at zero and -incrementing <structfield>match.addr</structfield> by one until -<constant>VIDIOC_DBG_G_CHIP_IDENT</constant> fails with an &EINVAL;. -The number zero always selects the host chip, ⪚ the chip connected -to the PCI or USB bus.</para> - - <para>When <structfield>match.type</structfield> is -<constant>V4L2_CHIP_MATCH_I2C_DRIVER</constant>, -<structfield>match.name</structfield> contains the I2C driver name. -For instance -<constant>"saa7127"</constant> will match any chip -supported by the saa7127 driver, regardless of its &i2c; bus address. -When multiple chips supported by the same driver are present, the -ioctl will return <constant>V4L2_IDENT_AMBIGUOUS</constant> in the -<structfield>ident</structfield> field.</para> - - <para>When <structfield>match.type</structfield> is -<constant>V4L2_CHIP_MATCH_I2C_ADDR</constant>, -<structfield>match.addr</structfield> selects a chip by its 7 bit -&i2c; bus address.</para> - - <para>When <structfield>match.type</structfield> is -<constant>V4L2_CHIP_MATCH_AC97</constant>, -<structfield>match.addr</structfield> selects the nth AC97 chip -on the TV card. You can enumerate all chips by starting at zero and -incrementing <structfield>match.addr</structfield> by one until -<constant>VIDIOC_DBG_G_CHIP_IDENT</constant> fails with an &EINVAL;.</para> - - <para>On success, the <structfield>ident</structfield> field will -contain a chip ID from the Linux -<filename>media/v4l2-chip-ident.h</filename> header file, and the -<structfield>revision</structfield> field will contain a driver -specific value, or zero if no particular revision is associated with -this chip.</para> - - <para>When the driver could not identify the selected chip, -<structfield>ident</structfield> will contain -<constant>V4L2_IDENT_UNKNOWN</constant>. When no chip matched -the ioctl will succeed but the -<structfield>ident</structfield> field will contain -<constant>V4L2_IDENT_NONE</constant>. If multiple chips matched, -<structfield>ident</structfield> will contain -<constant>V4L2_IDENT_AMBIGUOUS</constant>. In all these cases the -<structfield>revision</structfield> field remains unchanged.</para> - - <para>This ioctl is optional, not all drivers may support it. It -was introduced in Linux 2.6.21, but the API was changed to the -one described here in 2.6.29.</para> - - <para>We recommended the <application>v4l2-dbg</application> -utility over calling this ioctl directly. It is available from the -LinuxTV v4l-dvb repository; see <ulink -url="http://linuxtv.org/repo/">http://linuxtv.org/repo/</ulink> for -access instructions.</para> - - <!-- Note for convenience vidioc-dbg-g-register.sgml - contains a duplicate of this table. --> - <table pgwide="1" frame="none" id="ident-v4l2-dbg-match"> - <title>struct <structname>v4l2_dbg_match</structname></title> - <tgroup cols="4"> - &cs-ustr; - <tbody valign="top"> - <row> - <entry>__u32</entry> - <entry><structfield>type</structfield></entry> - <entry>See <xref linkend="ident-chip-match-types" /> for a list of -possible types.</entry> - </row> - <row> - <entry>union</entry> - <entry>(anonymous)</entry> - </row> - <row> - <entry></entry> - <entry>__u32</entry> - <entry><structfield>addr</structfield></entry> - <entry>Match a chip by this number, interpreted according -to the <structfield>type</structfield> field.</entry> - </row> - <row> - <entry></entry> - <entry>char</entry> - <entry><structfield>name[32]</structfield></entry> - <entry>Match a chip by this name, interpreted according -to the <structfield>type</structfield> field.</entry> - </row> - </tbody> - </tgroup> - </table> - - <table pgwide="1" frame="none" id="v4l2-dbg-chip-ident"> - <title>struct <structname>v4l2_dbg_chip_ident</structname></title> - <tgroup cols="3"> - &cs-str; - <tbody valign="top"> - <row> - <entry>struct v4l2_dbg_match</entry> - <entry><structfield>match</structfield></entry> - <entry>How to match the chip, see <xref linkend="ident-v4l2-dbg-match" />.</entry> - </row> - <row> - <entry>__u32</entry> - <entry><structfield>ident</structfield></entry> - <entry>A chip identifier as defined in the Linux -<filename>media/v4l2-chip-ident.h</filename> header file, or one of -the values from <xref linkend="chip-ids" />.</entry> - </row> - <row> - <entry>__u32</entry> - <entry><structfield>revision</structfield></entry> - <entry>A chip revision, chip and driver specific.</entry> - </row> - </tbody> - </tgroup> - </table> - - <!-- Note for convenience vidioc-dbg-g-register.sgml - contains a duplicate of this table. --> - <table pgwide="1" frame="none" id="ident-chip-match-types"> - <title>Chip Match Types</title> - <tgroup cols="3"> - &cs-def; - <tbody valign="top"> - <row> - <entry><constant>V4L2_CHIP_MATCH_BRIDGE</constant></entry> - <entry>0</entry> - <entry>Match the nth chip on the card, zero for the - bridge chip. Does not match sub-devices.</entry> - </row> - <row> - <entry><constant>V4L2_CHIP_MATCH_I2C_DRIVER</constant></entry> - <entry>1</entry> - <entry>Match an &i2c; chip by its driver name.</entry> - </row> - <row> - <entry><constant>V4L2_CHIP_MATCH_I2C_ADDR</constant></entry> - <entry>2</entry> - <entry>Match a chip by its 7 bit &i2c; bus address.</entry> - </row> - <row> - <entry><constant>V4L2_CHIP_MATCH_AC97</constant></entry> - <entry>3</entry> - <entry>Match the nth anciliary AC97 chip.</entry> - </row> - <row> - <entry><constant>V4L2_CHIP_MATCH_SUBDEV</constant></entry> - <entry>4</entry> - <entry>Match the nth sub-device. Can't be used with this ioctl.</entry> - </row> - </tbody> - </tgroup> - </table> - - <!-- This is an anonymous enum in media/v4l2-chip-ident.h. --> - <table pgwide="1" frame="none" id="chip-ids"> - <title>Chip Identifiers</title> - <tgroup cols="3"> - &cs-def; - <tbody valign="top"> - <row> - <entry><constant>V4L2_IDENT_NONE</constant></entry> - <entry>0</entry> - <entry>No chip matched.</entry> - </row> - <row> - <entry><constant>V4L2_IDENT_AMBIGUOUS</constant></entry> - <entry>1</entry> - <entry>Multiple chips matched.</entry> - </row> - <row> - <entry><constant>V4L2_IDENT_UNKNOWN</constant></entry> - <entry>2</entry> - <entry>A chip is present at this address, but the driver -could not identify it.</entry> - </row> - </tbody> - </tgroup> - </table> - </refsect1> - - <refsect1> - &return-value; - - <variablelist> - <varlistentry> - <term><errorcode>EINVAL</errorcode></term> - <listitem> - <para>The <structfield>match_type</structfield> is invalid.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> -</refentry> diff --git a/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-info.xml b/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-info.xml index e1cece6c5de1..4c4603c135fe 100644 --- a/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-info.xml +++ b/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-info.xml @@ -73,8 +73,7 @@ fields of a &v4l2-dbg-chip-info; and call <constant>VIDIOC_DBG_G_CHIP_INFO</constant> with a pointer to this structure. On success the driver stores information about the selected chip in the <structfield>name</structfield> and -<structfield>flags</structfield> fields. On failure the structure -remains unchanged.</para> +<structfield>flags</structfield> fields.</para> <para>When <structfield>match.type</structfield> is <constant>V4L2_CHIP_MATCH_BRIDGE</constant>, @@ -132,7 +131,7 @@ to the <structfield>type</structfield> field.</entry> <entry>char</entry> <entry><structfield>name[32]</structfield></entry> <entry>Match a chip by this name, interpreted according -to the <structfield>type</structfield> field.</entry> +to the <structfield>type</structfield> field. Currently unused.</entry> </row> </tbody> </tgroup> @@ -183,21 +182,6 @@ is set, then the driver supports reading registers from the device. If bridge chip. Does not match sub-devices.</entry> </row> <row> - <entry><constant>V4L2_CHIP_MATCH_I2C_DRIVER</constant></entry> - <entry>1</entry> - <entry>Match an &i2c; chip by its driver name. Can't be used with this ioctl.</entry> - </row> - <row> - <entry><constant>V4L2_CHIP_MATCH_I2C_ADDR</constant></entry> - <entry>2</entry> - <entry>Match a chip by its 7 bit &i2c; bus address. Can't be used with this ioctl.</entry> - </row> - <row> - <entry><constant>V4L2_CHIP_MATCH_AC97</constant></entry> - <entry>3</entry> - <entry>Match the nth anciliary AC97 chip. Can't be used with this ioctl.</entry> - </row> - <row> <entry><constant>V4L2_CHIP_MATCH_SUBDEV</constant></entry> <entry>4</entry> <entry>Match the nth sub-device.</entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml b/Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml index d13bac9e2445..3d038e75d12b 100644 --- a/Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml +++ b/Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml @@ -76,7 +76,7 @@ compiled with the <constant>CONFIG_VIDEO_ADV_DEBUG</constant> option to enable these ioctls.</para> <para>To write a register applications must initialize all fields -of a &v4l2-dbg-register; and call +of a &v4l2-dbg-register; except for <structfield>size</structfield> and call <constant>VIDIOC_DBG_S_REGISTER</constant> with a pointer to this structure. The <structfield>match.type</structfield> and <structfield>match.addr</structfield> or <structfield>match.name</structfield> @@ -91,8 +91,8 @@ written into the register.</para> <structfield>reg</structfield> fields, and call <constant>VIDIOC_DBG_G_REGISTER</constant> with a pointer to this structure. On success the driver stores the register value in the -<structfield>val</structfield> field. On failure the structure remains -unchanged.</para> +<structfield>val</structfield> field and the size (in bytes) of the +value in <structfield>size</structfield>.</para> <para>When <structfield>match.type</structfield> is <constant>V4L2_CHIP_MATCH_BRIDGE</constant>, @@ -102,39 +102,9 @@ chip connected to the PCI or USB bus. You can find out which chips are present with the &VIDIOC-DBG-G-CHIP-INFO; ioctl.</para> <para>When <structfield>match.type</structfield> is -<constant>V4L2_CHIP_MATCH_I2C_DRIVER</constant>, -<structfield>match.name</structfield> contains the I2C driver name. -For instance -<constant>"saa7127"</constant> will match any chip -supported by the saa7127 driver, regardless of its &i2c; bus address. -When multiple chips supported by the same driver are present, the -effect of these ioctls is undefined. Again with the -&VIDIOC-DBG-G-CHIP-INFO; ioctl you can find out which &i2c; chips are -present.</para> - - <para>When <structfield>match.type</structfield> is -<constant>V4L2_CHIP_MATCH_I2C_ADDR</constant>, -<structfield>match.addr</structfield> selects a chip by its 7 bit &i2c; -bus address.</para> - - <para>When <structfield>match.type</structfield> is -<constant>V4L2_CHIP_MATCH_AC97</constant>, -<structfield>match.addr</structfield> selects the nth AC97 chip -on the TV card.</para> - - <para>When <structfield>match.type</structfield> is <constant>V4L2_CHIP_MATCH_SUBDEV</constant>, <structfield>match.addr</structfield> selects the nth sub-device.</para> - <note> - <title>Success not guaranteed</title> - - <para>Due to a flaw in the Linux &i2c; bus driver these ioctls may -return successfully without actually reading or writing a register. To -catch the most likely failure we recommend a &VIDIOC-DBG-G-CHIP-INFO; -call confirming the presence of the selected &i2c; chip.</para> - </note> - <para>These ioctls are optional, not all drivers may support them. However when a driver supports these ioctls it must also support &VIDIOC-DBG-G-CHIP-INFO;. Conversely it may support @@ -150,7 +120,7 @@ LinuxTV v4l-dvb repository; see <ulink url="http://linuxtv.org/repo/">http://linuxtv.org/repo/</ulink> for access instructions.</para> - <!-- Note for convenience vidioc-dbg-g-chip-ident.sgml + <!-- Note for convenience vidioc-dbg-g-chip-info.sgml contains a duplicate of this table. --> <table pgwide="1" frame="none" id="v4l2-dbg-match"> <title>struct <structname>v4l2_dbg_match</structname></title> @@ -160,7 +130,7 @@ access instructions.</para> <row> <entry>__u32</entry> <entry><structfield>type</structfield></entry> - <entry>See <xref linkend="ident-chip-match-types" /> for a list of + <entry>See <xref linkend="chip-match-types" /> for a list of possible types.</entry> </row> <row> @@ -179,7 +149,7 @@ to the <structfield>type</structfield> field.</entry> <entry>char</entry> <entry><structfield>name[32]</structfield></entry> <entry>Match a chip by this name, interpreted according -to the <structfield>type</structfield> field.</entry> +to the <structfield>type</structfield> field. Currently unused.</entry> </row> </tbody> </tgroup> @@ -199,6 +169,11 @@ to the <structfield>type</structfield> field.</entry> <entry>How to match the chip, see <xref linkend="v4l2-dbg-match" />.</entry> </row> <row> + <entry>__u32</entry> + <entry><structfield>size</structfield></entry> + <entry>The register size in bytes.</entry> + </row> + <row> <entry>__u64</entry> <entry><structfield>reg</structfield></entry> <entry>A register number.</entry> @@ -213,7 +188,7 @@ register.</entry> </tgroup> </table> - <!-- Note for convenience vidioc-dbg-g-chip-ident.sgml + <!-- Note for convenience vidioc-dbg-g-chip-info.sgml contains a duplicate of this table. --> <table pgwide="1" frame="none" id="chip-match-types"> <title>Chip Match Types</title> @@ -227,21 +202,6 @@ register.</entry> bridge chip. Does not match sub-devices.</entry> </row> <row> - <entry><constant>V4L2_CHIP_MATCH_I2C_DRIVER</constant></entry> - <entry>1</entry> - <entry>Match an &i2c; chip by its driver name.</entry> - </row> - <row> - <entry><constant>V4L2_CHIP_MATCH_I2C_ADDR</constant></entry> - <entry>2</entry> - <entry>Match a chip by its 7 bit &i2c; bus address.</entry> - </row> - <row> - <entry><constant>V4L2_CHIP_MATCH_AC97</constant></entry> - <entry>3</entry> - <entry>Match the nth anciliary AC97 chip.</entry> - </row> - <row> <entry><constant>V4L2_CHIP_MATCH_SUBDEV</constant></entry> <entry>4</entry> <entry>Match the nth sub-device.</entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-querystd.xml b/Documentation/DocBook/media/v4l/vidioc-querystd.xml index fe80a183d957..222348542182 100644 --- a/Documentation/DocBook/media/v4l/vidioc-querystd.xml +++ b/Documentation/DocBook/media/v4l/vidioc-querystd.xml @@ -54,7 +54,8 @@ standard automatically. To do so, applications call <constant> VIDIOC_QUERYSTD</constant> with a pointer to a &v4l2-std-id; type. The driver stores here a set of candidates, this can be a single flag or a set of supported standards if for example the hardware can only -distinguish between 50 and 60 Hz systems. When detection is not +distinguish between 50 and 60 Hz systems. If no signal was detected, +then the driver will return V4L2_STD_UNKNOWN. When detection is not possible or fails, the set must contain all standards supported by the current video input or output.</para> diff --git a/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt b/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt index de9f6b78ee51..0bf6fb7fbeab 100644 --- a/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt +++ b/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt @@ -2,8 +2,10 @@ Exynos4x12/Exynos5 SoC series camera host interface (FIMC-LITE) Required properties: -- compatible : should be "samsung,exynos4212-fimc-lite" for Exynos4212 and - Exynos4412 SoCs; +- compatible : should be one of: + "samsung,exynos4212-fimc-lite" for Exynos4212/4412 SoCs, + "samsung,exynos5250-fimc-lite" for Exynos5250 compatible + devices; - reg : physical base address and size of the device memory mapped registers; - interrupts : should contain FIMC-LITE interrupt; diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt new file mode 100644 index 000000000000..cb60443ff78f --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt @@ -0,0 +1,40 @@ +* Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor + +The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor with +an active array size of 2592H x 1944V. It is programmable through a simple +two-wire serial interface. + +Required Properties: +- compatible: value should be either one among the following + (a) "aptina,mt9p031" for mt9p031 sensor + (b) "aptina,mt9p031m" for mt9p031m sensor + +- input-clock-frequency: Input clock frequency. + +- pixel-clock-frequency: Pixel clock frequency. + +Optional Properties: +- reset-gpios: Chip reset GPIO + +For further reading on port node refer to +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + + i2c0@1c22000 { + ... + ... + mt9p031@5d { + compatible = "aptina,mt9p031"; + reg = <0x5d>; + reset-gpios = <&gpio3 30 0>; + + port { + mt9p031_1: endpoint { + input-clock-frequency = <6000000>; + pixel-clock-frequency = <96000000>; + }; + }; + }; + ... + }; diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt new file mode 100644 index 000000000000..46752cc71f2e --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt @@ -0,0 +1,44 @@ +* Texas Instruments TVP514x video decoder + +The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, single-chip +digital video decoder that digitizes and decodes all popular baseband analog +video formats into digital video component. The tvp514x decoder supports analog- +to-digital (A/D) conversion of component RGB and YPbPr signals as well as A/D +conversion and decoding of NTSC, PAL and SECAM composite and S-video into +component YCbCr. + +Required Properties : +- compatible : value should be either one among the following + (a) "ti,tvp5146" for tvp5146 decoder. + (b) "ti,tvp5146m2" for tvp5146m2 decoder. + (c) "ti,tvp5147" for tvp5147 decoder. + (d) "ti,tvp5147m1" for tvp5147m1 decoder. + +- hsync-active: HSYNC Polarity configuration for endpoint. + +- vsync-active: VSYNC Polarity configuration for endpoint. + +- pclk-sample: Clock polarity of the endpoint. + +For further reading on port node refer to Documentation/devicetree/bindings/ +media/video-interfaces.txt. + +Example: + + i2c0@1c22000 { + ... + ... + tvp514x@5c { + compatible = "ti,tvp5146"; + reg = <0x5c>; + + port { + tvp514x_1: endpoint { + hsync-active = <1>; + vsync-active = <1>; + pclk-sample = <0>; + }; + }; + }; + ... + }; diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt index 51c776b7f7a3..96312f6c4c26 100644 --- a/Documentation/devicetree/bindings/media/samsung-fimc.txt +++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt @@ -127,22 +127,22 @@ Example: }; }; }; - }; - /* MIPI CSI-2 bus IF sensor */ - s5c73m3: sensor@0x1a { - compatible = "samsung,s5c73m3"; - reg = <0x1a>; - vddio-supply = <...>; + /* MIPI CSI-2 bus IF sensor */ + s5c73m3: sensor@0x1a { + compatible = "samsung,s5c73m3"; + reg = <0x1a>; + vddio-supply = <...>; - clock-frequency = <24000000>; - clocks = <...>; - clock-names = "mclk"; + clock-frequency = <24000000>; + clocks = <...>; + clock-names = "mclk"; - port { - s5c73m3_1: endpoint { - data-lanes = <1 2 3 4>; - remote-endpoint = <&csis0_ep>; + port { + s5c73m3_1: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&csis0_ep>; + }; }; }; }; diff --git a/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt b/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt index 5f8e28e2484f..be45f0b1a449 100644 --- a/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt +++ b/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt @@ -5,8 +5,8 @@ Required properties: - compatible : "samsung,s5pv210-csis" for S5PV210 (S5PC110), "samsung,exynos4210-csis" for Exynos4210 (S5PC210), - "samsung,exynos4212-csis" for Exynos4212/Exynos4412 - SoC series; + "samsung,exynos4212-csis" for Exynos4212/Exynos4412, + "samsung,exynos5250-csis" for Exynos5250; - reg : offset and length of the register set for the device; - interrupts : should contain MIPI CSIS interrupt; the format of the interrupt specifier depends on the interrupt controller; diff --git a/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt b/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt new file mode 100644 index 000000000000..1ce4e46bcbb7 --- /dev/null +++ b/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt @@ -0,0 +1,18 @@ +Bindings, specific for the sh_mobile_ceu_camera.c driver: + - compatible: Should be "renesas,sh-mobile-ceu" + - reg: register base and size + - interrupts: the interrupt number + - interrupt-parent: the interrupt controller + - renesas,max-width: maximum image width, supported on this SoC + - renesas,max-height: maximum image height, supported on this SoC + +Example: + +ceu0: ceu@0xfe910000 { + compatible = "renesas,sh-mobile-ceu"; + reg = <0xfe910000 0xa0>; + interrupt-parent = <&intcs>; + interrupts = <0x880>; + renesas,max-width = <8188>; + renesas,max-height = <8188>; +}; diff --git a/Documentation/media-framework.txt b/Documentation/media-framework.txt index eeced24e56af..f552a75c0e70 100644 --- a/Documentation/media-framework.txt +++ b/Documentation/media-framework.txt @@ -265,7 +265,7 @@ connected to another pad through an enabled link media_entity_find_link(struct media_pad *source, struct media_pad *sink); - media_entity_remote_source(struct media_pad *pad); + media_entity_remote_pad(struct media_pad *pad); Refer to the kerneldoc documentation for more information. diff --git a/Documentation/video4linux/CARDLIST.bttv b/Documentation/video4linux/CARDLIST.bttv index 581f666a76cf..f14475011fea 100644 --- a/Documentation/video4linux/CARDLIST.bttv +++ b/Documentation/video4linux/CARDLIST.bttv @@ -160,3 +160,6 @@ 159 -> ProVideo PV183 [1830:1540,1831:1540,1832:1540,1833:1540,1834:1540,1835:1540,1836:1540,1837:1540] 160 -> Tongwei Video Technology TD-3116 [f200:3116] 161 -> Aposonic W-DVR [0279:0228] +162 -> Adlink MPG24 +163 -> Bt848 Capture 14MHz +164 -> CyberVision CV06 (SV) diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index b3ad68309109..8df17d063499 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -190,3 +190,4 @@ 189 -> Kworld PC150-U [17de:a134] 190 -> Asus My Cinema PS3-100 [1043:48cd] 191 -> Hawell HW-9004V1 +192 -> AverMedia AverTV Satellite Hybrid+FM A706 [1461:2055] diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner index 5b83a3ff15c2..ac8862184962 100644 --- a/Documentation/video4linux/CARDLIST.tuner +++ b/Documentation/video4linux/CARDLIST.tuner @@ -86,6 +86,6 @@ tuner=85 - Philips FQ1236 MK5 tuner=86 - Tena TNF5337 MFD tuner=87 - Xceive 4000 tuner tuner=88 - Xceive 5000C tuner -tuner=89 - Sony PAL+SECAM (BTF-PG472Z) -tuner=90 - Sony NTSC-M-JP (BTF-PK467Z) -tuner=91 - Sony NTSC-M (BTF-PB463Z) +tuner=89 - Sony BTF-PG472Z PAL/SECAM +tuner=90 - Sony BTF-PK467Z NTSC-M-JP +tuner=91 - Sony BTF-PB463Z NTSC-M diff --git a/Documentation/video4linux/fimc.txt b/Documentation/video4linux/fimc.txt index 25f4d3402722..e51f1b5b7324 100644 --- a/Documentation/video4linux/fimc.txt +++ b/Documentation/video4linux/fimc.txt @@ -1,6 +1,6 @@ Samsung S5P/EXYNOS4 FIMC driver -Copyright (C) 2012 Samsung Electronics Co., Ltd. +Copyright (C) 2012 - 2013 Samsung Electronics Co., Ltd. --------------------------------------------------------------------------- The FIMC (Fully Interactive Mobile Camera) device available in Samsung @@ -10,7 +10,7 @@ data from LCD controller (FIMD) through the SoC internal writeback data path. There are multiple FIMC instances in the SoCs (up to 4), having slightly different capabilities, like pixel alignment constraints, rotator availability, LCD writeback support, etc. The driver is located at -drivers/media/platform/s5p-fimc directory. +drivers/media/platform/exynos4-is directory. 1. Supported SoCs ================= @@ -36,21 +36,21 @@ Not currently supported: ===================== - media device driver - drivers/media/platform/s5p-fimc/fimc-mdevice.[ch] + drivers/media/platform/exynos4-is/media-dev.[ch] - camera capture video device driver - drivers/media/platform/s5p-fimc/fimc-capture.c + drivers/media/platform/exynos4-is/fimc-capture.c - MIPI-CSI2 receiver subdev - drivers/media/platform/s5p-fimc/mipi-csis.[ch] + drivers/media/platform/exynos4-is/mipi-csis.[ch] - video post-processor (mem-to-mem) - drivers/media/platform/s5p-fimc/fimc-core.c + drivers/media/platform/exynos4-is/fimc-core.c - common files - drivers/media/platform/s5p-fimc/fimc-core.h - drivers/media/platform/s5p-fimc/fimc-reg.h - drivers/media/platform/s5p-fimc/regs-fimc.h + drivers/media/platform/exynos4-is/fimc-core.h + drivers/media/platform/exynos4-is/fimc-reg.h + drivers/media/platform/exynos4-is/regs-fimc.h 4. User space interfaces ======================== @@ -143,7 +143,8 @@ or retrieve the information from /dev/media? with help of the media-ctl tool: 6. Platform support =================== -The machine code (plat-s5p and arch/arm/mach-*) must select following options +The machine code (arch/arm/plat-samsung and arch/arm/mach-*) must select +following options: CONFIG_S5P_DEV_FIMC0 mandatory CONFIG_S5P_DEV_FIMC1 \ diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index a300b283a1a0..6c4866b49eb5 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -246,7 +246,6 @@ may be NULL if the subdev driver does not support anything from that category. It looks like this: struct v4l2_subdev_core_ops { - int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip); int (*log_status)(struct v4l2_subdev *sd); int (*init)(struct v4l2_subdev *sd, u32 val); ... @@ -326,8 +325,27 @@ that width, height and the media bus pixel code are equal on both source and sink of the link. Subdev drivers are also free to use this function to perform the checks mentioned above in addition to their own checks. -A device (bridge) driver needs to register the v4l2_subdev with the -v4l2_device: +There are currently two ways to register subdevices with the V4L2 core. The +first (traditional) possibility is to have subdevices registered by bridge +drivers. This can be done when the bridge driver has the complete information +about subdevices connected to it and knows exactly when to register them. This +is typically the case for internal subdevices, like video data processing units +within SoCs or complex PCI(e) boards, camera sensors in USB cameras or connected +to SoCs, which pass information about them to bridge drivers, usually in their +platform data. + +There are however also situations where subdevices have to be registered +asynchronously to bridge devices. An example of such a configuration is a Device +Tree based system where information about subdevices is made available to the +system independently from the bridge devices, e.g. when subdevices are defined +in DT as I2C device nodes. The API used in this second case is described further +below. + +Using one or the other registration method only affects the probing process, the +run-time bridge-subdevice interaction is in both cases the same. + +In the synchronous case a device (bridge) driver needs to register the +v4l2_subdev with the v4l2_device: int err = v4l2_device_register_subdev(v4l2_dev, sd); @@ -346,24 +364,24 @@ Afterwards the subdev module can be unloaded and sd->dev == NULL. You can call an ops function either directly: - err = sd->ops->core->g_chip_ident(sd, &chip); + err = sd->ops->core->g_std(sd, &norm); but it is better and easier to use this macro: - err = v4l2_subdev_call(sd, core, g_chip_ident, &chip); + err = v4l2_subdev_call(sd, core, g_std, &norm); The macro will to the right NULL pointer checks and returns -ENODEV if subdev -is NULL, -ENOIOCTLCMD if either subdev->core or subdev->core->g_chip_ident is -NULL, or the actual result of the subdev->ops->core->g_chip_ident ops. +is NULL, -ENOIOCTLCMD if either subdev->core or subdev->core->g_std is +NULL, or the actual result of the subdev->ops->core->g_std ops. It is also possible to call all or a subset of the sub-devices: - v4l2_device_call_all(v4l2_dev, 0, core, g_chip_ident, &chip); + v4l2_device_call_all(v4l2_dev, 0, core, g_std, &norm); Any subdev that does not support this ops is skipped and error results are ignored. If you want to check for errors use this: - err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_chip_ident, &chip); + err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_std, &norm); Any error except -ENOIOCTLCMD will exit the loop with that error. If no errors (except -ENOIOCTLCMD) occurred, then 0 is returned. @@ -394,6 +412,30 @@ controlled through GPIO pins. This distinction is only relevant when setting up the device, but once the subdev is registered it is completely transparent. +In the asynchronous case subdevice probing can be invoked independently of the +bridge driver availability. The subdevice driver then has to verify whether all +the requirements for a successful probing are satisfied. This can include a +check for a master clock availability. If any of the conditions aren't satisfied +the driver might decide to return -EPROBE_DEFER to request further reprobing +attempts. Once all conditions are met the subdevice shall be registered using +the v4l2_async_register_subdev() function. Unregistration is performed using +the v4l2_async_unregister_subdev() call. Subdevices registered this way are +stored in a global list of subdevices, ready to be picked up by bridge drivers. + +Bridge drivers in turn have to register a notifier object with an array of +subdevice descriptors that the bridge device needs for its operation. This is +performed using the v4l2_async_notifier_register() call. To unregister the +notifier the driver has to call v4l2_async_notifier_unregister(). The former of +the two functions takes two arguments: a pointer to struct v4l2_device and a +pointer to struct v4l2_async_notifier. The latter contains a pointer to an array +of pointers to subdevice descriptors of type struct v4l2_async_subdev type. The +V4L2 core will then use these descriptors to match asynchronously registered +subdevices to them. If a match is detected the .bound() notifier callback is +called. After all subdevices have been located the .complete() callback is +called. When a subdevice is removed from the system the .unbind() method is +called. All three callbacks are optional. + + V4L2 sub-device userspace API ----------------------------- @@ -575,9 +617,13 @@ of the video device exits. The default video_device_release() callback just calls kfree to free the allocated memory. +There is also a video_device_release_empty() function that does nothing +(is empty) and can be used if the struct is embedded and there is nothing +to do when it is released. + You should also set these fields: -- v4l2_dev: set to the v4l2_device parent device. +- v4l2_dev: must be set to the v4l2_device parent device. - name: set to something descriptive and unique. @@ -614,15 +660,16 @@ You should also set these fields: If you want to have a separate priority state per (group of) device node(s), then you can point it to your own struct v4l2_prio_state. -- parent: you only set this if v4l2_device was registered with NULL as +- dev_parent: you only set this if v4l2_device was registered with NULL as the parent device struct. This only happens in cases where one hardware device has multiple PCI devices that all share the same v4l2_device core. The cx88 driver is an example of this: one core v4l2_device struct, but - it is used by both an raw video PCI device (cx8800) and a MPEG PCI device - (cx8802). Since the v4l2_device cannot be associated with a particular - PCI device it is setup without a parent device. But when the struct - video_device is setup you do know which parent PCI device to use. + it is used by both a raw video PCI device (cx8800) and a MPEG PCI device + (cx8802). Since the v4l2_device cannot be associated with two PCI devices + at the same time it is setup without a parent device. But when the struct + video_device is initialized you *do* know which parent PCI device to use and + so you set dev_device to the correct PCI device. - flags: optional. Set to V4L2_FL_USE_FH_PRIO if you want to let the framework handle the VIDIOC_G/S_PRIORITY ioctls. This requires that you use struct @@ -1061,3 +1108,29 @@ available event type is 'class base + 1'. An example on how the V4L2 events may be used can be found in the OMAP 3 ISP driver (drivers/media/platform/omap3isp). + + +V4L2 clocks +----------- + +Many subdevices, like camera sensors, TV decoders and encoders, need a clock +signal to be supplied by the system. Often this clock is supplied by the +respective bridge device. The Linux kernel provides a Common Clock Framework for +this purpose. However, it is not (yet) available on all architectures. Besides, +the nature of the multi-functional (clock, data + synchronisation, I2C control) +connection of subdevices to the system might impose special requirements on the +clock API usage. E.g. V4L2 has to support clock provider driver unregistration +while a subdevice driver is holding a reference to the clock. For these reasons +a V4L2 clock helper API has been developed and is provided to bridge and +subdevice drivers. + +The API consists of two parts: two functions to register and unregister a V4L2 +clock source: v4l2_clk_register() and v4l2_clk_unregister() and calls to control +a clock object, similar to the respective generic clock API calls: +v4l2_clk_get(), v4l2_clk_put(), v4l2_clk_enable(), v4l2_clk_disable(), +v4l2_clk_get_rate(), and v4l2_clk_set_rate(). Clock suppliers have to provide +clock operations that will be called when clock users invoke respective API +methods. + +It is expected that once the CCF becomes available on all relevant +architectures this API will be removed. diff --git a/Documentation/zh_CN/video4linux/v4l2-framework.txt b/Documentation/zh_CN/video4linux/v4l2-framework.txt index 44c1d934c4e3..0da95dbaef34 100644 --- a/Documentation/zh_CN/video4linux/v4l2-framework.txt +++ b/Documentation/zh_CN/video4linux/v4l2-framework.txt @@ -247,7 +247,6 @@ i2c_client 结构体，i2c_set_clientdata() 函数可用于保存一个 v4l2_sub 这些结构体定义如下： struct v4l2_subdev_core_ops { - int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip); int (*log_status)(struct v4l2_subdev *sd); int (*init)(struct v4l2_subdev *sd, u32 val); ... @@ -337,24 +336,24 @@ subdev->dev 域就指向了 v4l2_device。 注册之设备后，可通过以下方式直接调用其操作函数： - err = sd->ops->core->g_chip_ident(sd, &chip); + err = sd->ops->core->g_std(sd, &norm); 但使用如下宏会比较容易且合适： - err = v4l2_subdev_call(sd, core, g_chip_ident, &chip); + err = v4l2_subdev_call(sd, core, g_std, &norm); 这个宏将会做 NULL 指针检查，如果 subdev 为 NULL，则返回-ENODEV；如果 -subdev->core 或 subdev->core->g_chip_ident 为 NULL，则返回 -ENOIOCTLCMD； -否则将返回 subdev->ops->core->g_chip_ident ops 调用的实际结果。 +subdev->core 或 subdev->core->g_std 为 NULL，则返回 -ENOIOCTLCMD； +否则将返回 subdev->ops->core->g_std ops 调用的实际结果。 有时也可能同时调用所有或一系列子设备的某个操作函数： - v4l2_device_call_all(v4l2_dev, 0, core, g_chip_ident, &chip); + v4l2_device_call_all(v4l2_dev, 0, core, g_std, &norm); 任何不支持此操作的子设备都会被跳过，并忽略错误返回值。但如果你需要 检查出错码，则可使用如下函数： - err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_chip_ident, &chip); + err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_std, &norm); 除 -ENOIOCTLCMD 外的任何错误都会跳出循环并返回错误值。如果（除 -ENOIOCTLCMD 外）没有错误发生，则返回 0。 |