diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/feature-removal-schedule.txt | 9 | ||||
| -rw-r--r-- | Documentation/networking/00-INDEX | 2 | ||||
| -rw-r--r-- | Documentation/networking/shaper.txt | 48 |
3 files changed, 0 insertions, 59 deletions
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 2c3ae6c02a47..cc02e67239ec 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -280,15 +280,6 @@ Who: Thomas Gleixner <tglx@linutronix.de> --------------------------- -What: shaper network driver -When: January 2008 -Files: drivers/net/shaper.c, include/linux/if_shaper.h -Why: This driver has been marked obsolete for many years. - It was only designed to work on lower speed links and has design - flaws that lead to machine crashes. The qdisc infrastructure in - 2.4 or later kernels, provides richer features and is more robust. -Who: Stephen Hemminger <shemminger@linux-foundation.org> - --------------------------- What: i2c-i810, i2c-prosavage and i2c-savage4 diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX index b4eefadb9adf..02e56d447a8f 100644 --- a/Documentation/networking/00-INDEX +++ b/Documentation/networking/00-INDEX @@ -84,8 +84,6 @@ policy-routing.txt - IP policy-based routing ray_cs.txt - Raylink Wireless LAN card driver info. -shaper.txt - - info on the module that can shape/limit transmitted traffic. sk98lin.txt - Marvell Yukon Chipset / SysKonnect SK-98xx compliant Gigabit Ethernet Adapter family driver info diff --git a/Documentation/networking/shaper.txt b/Documentation/networking/shaper.txt deleted file mode 100644 index 6c4ebb66a906..000000000000 --- a/Documentation/networking/shaper.txt +++ /dev/null @@ -1,48 +0,0 @@ -Traffic Shaper For Linux - -This is the current BETA release of the traffic shaper for Linux. It works -within the following limits: - -o Minimum shaping speed is currently about 9600 baud (it can only -shape down to 1 byte per clock tick) - -o Maximum is about 256K, it will go above this but get a bit blocky. - -o If you ifconfig the master device that a shaper is attached to down -then your machine will follow. - -o The shaper must be a module. - - -Setup: - - A shaper device is configured using the shapeconfig program. -Typically you will do something like this - -shapecfg attach shaper0 eth1 -shapecfg speed shaper0 64000 -ifconfig shaper0 myhost netmask 255.255.255.240 broadcast 1.2.3.4.255 up -route add -net some.network netmask a.b.c.d dev shaper0 - -The shaper should have the same IP address as the device it is attached to -for normal use. - -Gotchas: - - The shaper shapes transmitted traffic. It's rather impossible to -shape received traffic except at the end (or a router) transmitting it. - - Gated/routed/rwhod/mrouted all see the shaper as an additional device -and will treat it as such unless patched. Note that for mrouted you can run -mrouted tunnels via a traffic shaper to control bandwidth usage. - - The shaper is device/route based. This makes it very easy to use -with any setup BUT less flexible. You may need to use iproute2 to set up -multiple route tables to get the flexibility. - - There is no "borrowing" or "sharing" scheme. This is a simple -traffic limiter. We implement Van Jacobson and Sally Floyd's CBQ -architecture into Linux 2.2. This is the preferred solution. Shaper is -for simple or back compatible setups. - -Alan |