diff options
Diffstat (limited to 'Documentation')
34 files changed, 1205 insertions, 27 deletions
diff --git a/Documentation/ABI/stable/sysfs-devices-system-cpu b/Documentation/ABI/stable/sysfs-devices-system-cpu new file mode 100644 index 000000000000..33c133e2a631 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-devices-system-cpu @@ -0,0 +1,25 @@ +What: /sys/devices/system/cpu/dscr_default +Date: 13-May-2014 +KernelVersion: v3.15.0 +Contact: +Description: Writes are equivalent to writing to + /sys/devices/system/cpu/cpuN/dscr on all CPUs. + Reads return the last written value or 0. + This value is not a global default: it is a way to set + all per-CPU defaults at the same time. +Values: 64 bit unsigned integer (bit field) + +What: /sys/devices/system/cpu/cpu[0-9]+/dscr +Date: 13-May-2014 +KernelVersion: v3.15.0 +Contact: +Description: Default value for the Data Stream Control Register (DSCR) on + a CPU. + This default value is used when the kernel is executing and + for any process that has not set the DSCR itself. + If a process ever sets the DSCR (via direct access to the + SPR) that value will be persisted for that process and used + on any CPU where it executes (overriding the value described + here). + If set by a process it will be inherited by child processes. +Values: 64 bit unsigned integer (bit field) diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy index f1c5cc9d17a8..4c3efe434806 100644 --- a/Documentation/ABI/testing/ima_policy +++ b/Documentation/ABI/testing/ima_policy @@ -23,7 +23,7 @@ Description: [fowner]] lsm: [[subj_user=] [subj_role=] [subj_type=] [obj_user=] [obj_role=] [obj_type=]] - option: [[appraise_type=]] + option: [[appraise_type=]] [permit_directio] base: func:= [BPRM_CHECK][MMAP_CHECK][FILE_CHECK][MODULE_CHECK] mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC] diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index b3429aec444c..02ab997a1ed2 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -458,15 +458,11 @@ About use_hierarchy, see Section 6. 5.1 force_empty memory.force_empty interface is provided to make cgroup's memory usage empty. - You can use this interface only when the cgroup has no tasks. When writing anything to this # echo 0 > memory.force_empty - Almost all pages tracked by this memory cgroup will be unmapped and freed. - Some pages cannot be freed because they are locked or in-use. Such pages are - moved to parent (if use_hierarchy==1) or root (if use_hierarchy==0) and this - cgroup will be empty. + the cgroup will be reclaimed and as many pages reclaimed as possible. The typical use case for this interface is before calling rmdir(). Because rmdir() moves all pages to parent, some out-of-use page caches can be diff --git a/Documentation/cgroups/unified-hierarchy.txt b/Documentation/cgroups/unified-hierarchy.txt new file mode 100644 index 000000000000..324b182e6000 --- /dev/null +++ b/Documentation/cgroups/unified-hierarchy.txt @@ -0,0 +1,359 @@ + +Cgroup unified hierarchy + +April, 2014 Tejun Heo <tj@kernel.org> + +This document describes the changes made by unified hierarchy and +their rationales. It will eventually be merged into the main cgroup +documentation. + +CONTENTS + +1. Background +2. Basic Operation + 2-1. Mounting + 2-2. cgroup.subtree_control + 2-3. cgroup.controllers +3. Structural Constraints + 3-1. Top-down + 3-2. No internal tasks +4. Other Changes + 4-1. [Un]populated Notification + 4-2. Other Core Changes + 4-3. Per-Controller Changes + 4-3-1. blkio + 4-3-2. cpuset + 4-3-3. memory +5. Planned Changes + 5-1. CAP for resource control + + +1. Background + +cgroup allows an arbitrary number of hierarchies and each hierarchy +can host any number of controllers. While this seems to provide a +high level of flexibility, it isn't quite useful in practice. + +For example, as there is only one instance of each controller, utility +type controllers such as freezer which can be useful in all +hierarchies can only be used in one. The issue is exacerbated by the +fact that controllers can't be moved around once hierarchies are +populated. Another issue is that all controllers bound to a hierarchy +are forced to have exactly the same view of the hierarchy. It isn't +possible to vary the granularity depending on the specific controller. + +In practice, these issues heavily limit which controllers can be put +on the same hierarchy and most configurations resort to putting each +controller on its own hierarchy. Only closely related ones, such as +the cpu and cpuacct controllers, make sense to put on the same +hierarchy. This often means that userland ends up managing multiple +similar hierarchies repeating the same steps on each hierarchy +whenever a hierarchy management operation is necessary. + +Unfortunately, support for multiple hierarchies comes at a steep cost. +Internal implementation in cgroup core proper is dazzlingly +complicated but more importantly the support for multiple hierarchies +restricts how cgroup is used in general and what controllers can do. + +There's no limit on how many hierarchies there may be, which means +that a task's cgroup membership can't be described in finite length. +The key may contain any varying number of entries and is unlimited in +length, which makes it highly awkward to handle and leads to addition +of controllers which exist only to identify membership, which in turn +exacerbates the original problem. + +Also, as a controller can't have any expectation regarding what shape +of hierarchies other controllers would be on, each controller has to +assume that all other controllers are operating on completely +orthogonal hierarchies. This makes it impossible, or at least very +cumbersome, for controllers to cooperate with each other. + +In most use cases, putting controllers on hierarchies which are +completely orthogonal to each other isn't necessary. What usually is +called for is the ability to have differing levels of granularity +depending on the specific controller. In other words, hierarchy may +be collapsed from leaf towards root when viewed from specific +controllers. For example, a given configuration might not care about +how memory is distributed beyond a certain level while still wanting +to control how CPU cycles are distributed. + +Unified hierarchy is the next version of cgroup interface. It aims to +address the aforementioned issues by having more structure while +retaining enough flexibility for most use cases. Various other +general and controller-specific interface issues are also addressed in +the process. + + +2. Basic Operation + +2-1. Mounting + +Currently, unified hierarchy can be mounted with the following mount +command. Note that this is still under development and scheduled to +change soon. + + mount -t cgroup -o __DEVEL__sane_behavior cgroup $MOUNT_POINT + +All controllers which are not bound to other hierarchies are +automatically bound to unified hierarchy and show up at the root of +it. Controllers which are enabled only in the root of unified +hierarchy can be bound to other hierarchies at any time. This allows +mixing unified hierarchy with the traditional multiple hierarchies in +a fully backward compatible way. + + +2-2. cgroup.subtree_control + +All cgroups on unified hierarchy have a "cgroup.subtree_control" file +which governs which controllers are enabled on the children of the +cgroup. Let's assume a hierarchy like the following. + + root - A - B - C + \ D + +root's "cgroup.subtree_control" file determines which controllers are +enabled on A. A's on B. B's on C and D. This coincides with the +fact that controllers on the immediate sub-level are used to +distribute the resources of the parent. In fact, it's natural to +assume that resource control knobs of a child belong to its parent. +Enabling a controller in a "cgroup.subtree_control" file declares that +distribution of the respective resources of the cgroup will be +controlled. Note that this means that controller enable states are +shared among siblings. + +When read, the file contains a space-separated list of currently +enabled controllers. A write to the file should contain a +space-separated list of controllers with '+' or '-' prefixed (without +the quotes). Controllers prefixed with '+' are enabled and '-' +disabled. If a controller is listed multiple times, the last entry +wins. The specific operations are executed atomically - either all +succeed or fail. + + +2-3. cgroup.controllers + +Read-only "cgroup.controllers" file contains a space-separated list of +controllers which can be enabled in the cgroup's +"cgroup.subtree_control" file. + +In the root cgroup, this lists controllers which are not bound to +other hierarchies and the content changes as controllers are bound to +and unbound from other hierarchies. + +In non-root cgroups, the content of this file equals that of the +parent's "cgroup.subtree_control" file as only controllers enabled +from the parent can be used in its children. + + +3. Structural Constraints + +3-1. Top-down + +As it doesn't make sense to nest control of an uncontrolled resource, +all non-root "cgroup.subtree_control" files can only contain +controllers which are enabled in the parent's "cgroup.subtree_control" +file. A controller can be enabled only if the parent has the +controller enabled and a controller can't be disabled if one or more +children have it enabled. + + +3-2. No internal tasks + +One long-standing issue that cgroup faces is the competition between +tasks belonging to the parent cgroup and its children cgroups. This +is inherently nasty as two different types of entities compete and +there is no agreed-upon obvious way to handle it. Different +controllers are doing different things. + +The cpu controller considers tasks and cgroups as equivalents and maps +nice levels to cgroup weights. This works for some cases but falls +flat when children should be allocated specific ratios of CPU cycles +and the number of internal tasks fluctuates - the ratios constantly +change as the number of competing entities fluctuates. There also are +other issues. The mapping from nice level to weight isn't obvious or +universal, and there are various other knobs which simply aren't +available for tasks. + +The blkio controller implicitly creates a hidden leaf node for each +cgroup to host the tasks. The hidden leaf has its own copies of all +the knobs with "leaf_" prefixed. While this allows equivalent control +over internal tasks, it's with serious drawbacks. It always adds an +extra layer of nesting which may not be necessary, makes the interface +messy and significantly complicates the implementation. + +The memory controller currently doesn't have a way to control what +happens between internal tasks and child cgroups and the behavior is +not clearly defined. There have been attempts to add ad-hoc behaviors +and knobs to tailor the behavior to specific workloads. Continuing +this direction will lead to problems which will be extremely difficult +to resolve in the long term. + +Multiple controllers struggle with internal tasks and came up with +different ways to deal with it; unfortunately, all the approaches in +use now are severely flawed and, furthermore, the widely different +behaviors make cgroup as whole highly inconsistent. + +It is clear that this is something which needs to be addressed from +cgroup core proper in a uniform way so that controllers don't need to +worry about it and cgroup as a whole shows a consistent and logical +behavior. To achieve that, unified hierarchy enforces the following +structural constraint: + + Except for the root, only cgroups which don't contain any task may + have controllers enabled in their "cgroup.subtree_control" files. + +Combined with other properties, this guarantees that, when a +controller is looking at the part of the hierarchy which has it +enabled, tasks are always only on the leaves. This rules out +situations where child cgroups compete against internal tasks of the +parent. + +There are two things to note. Firstly, the root cgroup is exempt from +the restriction. Root contains tasks and anonymous resource +consumption which can't be associated with any other cgroup and +requires special treatment from most controllers. How resource +consumption in the root cgroup is governed is up to each controller. + +Secondly, the restriction doesn't take effect if there is no enabled +controller in the cgroup's "cgroup.subtree_control" file. This is +important as otherwise it wouldn't be possible to create children of a +populated cgroup. To control resource distribution of a cgroup, the +cgroup must create children and transfer all its tasks to the children +before enabling controllers in its "cgroup.subtree_control" file. + + +4. Other Changes + +4-1. [Un]populated Notification + +cgroup users often need a way to determine when a cgroup's +subhierarchy becomes empty so that it can be cleaned up. cgroup +currently provides release_agent for it; unfortunately, this mechanism +is riddled with issues. + +- It delivers events by forking and execing a userland binary + specified as the release_agent. This is a long deprecated method of + notification delivery. It's extremely heavy, slow and cumbersome to + integrate with larger infrastructure. + +- There is single monitoring point at the root. There's no way to + delegate management of a subtree. + +- The event isn't recursive. It triggers when a cgroup doesn't have + any tasks or child cgroups. Events for internal nodes trigger only + after all children are removed. This again makes it impossible to + delegate management of a subtree. + +- Events are filtered from the kernel side. A "notify_on_release" + file is used to subscribe to or suppress release events. This is + unnecessarily complicated and probably done this way because event + delivery itself was expensive. + +Unified hierarchy implements an interface file "cgroup.populated" +which can be used to monitor whether the cgroup's subhierarchy has +tasks in it or not. Its value is 0 if there is no task in the cgroup +and its descendants; otherwise, 1. poll and [id]notify events are +triggered when the value changes. + +This is significantly lighter and simpler and trivially allows +delegating management of subhierarchy - subhierarchy monitoring can +block further propagation simply by putting itself or another process +in the subhierarchy and monitor events that it's interested in from +there without interfering with monitoring higher in the tree. + +In unified hierarchy, the release_agent mechanism is no longer +supported and the interface files "release_agent" and +"notify_on_release" do not exist. + + +4-2. Other Core Changes + +- None of the mount options is allowed. + +- remount is disallowed. + +- rename(2) is disallowed. + +- The "tasks" file is removed. Everything should at process + granularity. Use the "cgroup.procs" file instead. + +- The "cgroup.procs" file is not sorted. pids will be unique unless + they got recycled in-between reads. + +- The "cgroup.clone_children" file is removed. + + +4-3. Per-Controller Changes + +4-3-1. blkio + +- blk-throttle becomes properly hierarchical. + + +4-3-2. cpuset + +- Tasks are kept in empty cpusets after hotplug and take on the masks + of the nearest non-empty ancestor, instead of being moved to it. + +- A task can be moved into an empty cpuset, and again it takes on the + masks of the nearest non-empty ancestor. + + +4-3-3. memory + +- use_hierarchy is on by default and the cgroup file for the flag is + not created. + + +5. Planned Changes + +5-1. CAP for resource control + +Unified hierarchy will require one of the capabilities(7), which is +yet to be decided, for all resource control related knobs. Process +organization operations - creation of sub-cgroups and migration of +processes in sub-hierarchies may be delegated by changing the +ownership and/or permissions on the cgroup directory and +"cgroup.procs" interface file; however, all operations which affect +resource control - writes to a "cgroup.subtree_control" file or any +controller-specific knobs - will require an explicit CAP privilege. + +This, in part, is to prevent the cgroup interface from being +inadvertently promoted to programmable API used by non-privileged +binaries. cgroup exposes various aspects of the system in ways which +aren't properly abstracted for direct consumption by regular programs. +This is an administration interface much closer to sysctl knobs than +system calls. Even the basic access model, being filesystem path +based, isn't suitable for direct consumption. There's no way to +access "my cgroup" in a race-free way or make multiple operations +atomic against migration to another cgroup. + +Another aspect is that, for better or for worse, the cgroup interface +goes through far less scrutiny than regular interfaces for +unprivileged userland. The upside is that cgroup is able to expose +useful features which may not be suitable for general consumption in a +reasonable time frame. It provides a relatively short path between +internal details and userland-visible interface. Of course, this +shortcut comes with high risk. We go through what we go through for +general kernel APIs for good reasons. It may end up leaking internal +details in a way which can exert significant pain by locking the +kernel into a contract that can't be maintained in a reasonable +manner. + +Also, due to the specific nature, cgroup and its controllers don't +tend to attract attention from a wide scope of developers. cgroup's +short history is already fraught with severely mis-designed +interfaces, unnecessary commitments to and exposing of internal +details, broken and dangerous implementations of various features. + +Keeping cgroup as an administration interface is both advantageous for +its role and imperative given its nature. Some of the cgroup features +may make sense for unprivileged access. If deemed justified, those +must be further abstracted and implemented as a different interface, +be it a system call or process-private filesystem, and survive through +the scrutiny that any interface for general consumption is required to +go through. + +Requiring CAP is not a complete solution but should serve as a +significant deterrent against spraying cgroup usages in non-privileged +programs. diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index 48b285ffa3a6..c96d8dcf98fd 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -4,10 +4,16 @@ SATA nodes are defined to describe on-chip Serial ATA controllers. Each SATA controller should have its own node. Required properties: -- compatible : compatible list, one of "snps,spear-ahci", - "snps,exynos5440-ahci", "ibm,476gtr-ahci", - "allwinner,sun4i-a10-ahci", "fsl,imx53-ahci" - "fsl,imx6q-ahci" or "snps,dwc-ahci" +- compatible : compatible string, one of: + - "allwinner,sun4i-a10-ahci" + - "fsl,imx53-ahci" + - "fsl,imx6q-ahci" + - "hisilicon,hisi-ahci" + - "ibm,476gtr-ahci" + - "marvell,armada-380-ahci" + - "snps,dwc-ahci" + - "snps,exynos5440-ahci" + - "snps,spear-ahci" - interrupts : <interrupt mapping for SATA IRQ> - reg : <registers mapping> diff --git a/Documentation/devicetree/bindings/clock/corenet-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt index 24711af48e30..5666812fc42b 100644 --- a/Documentation/devicetree/bindings/clock/corenet-clock.txt +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt @@ -7,6 +7,14 @@ which can then be passed to a variety of internal logic, including cores and peripheral IP blocks. Please refer to the Reference Manual for details. +All references to "1.0" and "2.0" refer to the QorIQ chassis version to +which the chip complies. + +Chassis Version Example Chips +--------------- ------------- +1.0 p4080, p5020, p5040 +2.0 t4240, b4860, t1040 + 1. Clock Block Binding Required properties: @@ -85,7 +93,7 @@ Example for clock block and clock provider: #clock-cells = <0>; compatible = "fsl,qoriq-sysclk-1.0"; clock-output-names = "sysclk"; - } + }; pll0: pll0@800 { #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/dma/mmp-dma.txt b/Documentation/devicetree/bindings/dma/mmp-dma.txt index a4fa4efa1d83..7a802f64e5bd 100644 --- a/Documentation/devicetree/bindings/dma/mmp-dma.txt +++ b/Documentation/devicetree/bindings/dma/mmp-dma.txt @@ -1,17 +1,20 @@ * MARVELL MMP DMA controller Marvell Peripheral DMA Controller -Used platfroms: pxa688, pxa910, pxa3xx, etc +Used platforms: pxa688, pxa910, pxa3xx, etc Required properties: - compatible: Should be "marvell,pdma-1.0" - reg: Should contain DMA registers location and length. - interrupts: Either contain all of the per-channel DMA interrupts or one irq for pdma device -- #dma-channels: Number of DMA channels supported by the controller. + +Optional properties: +- #dma-channels: Number of DMA channels supported by the controller (defaults + to 32 when not specified) "marvell,pdma-1.0" -Used platfroms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688. +Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688. Examples: @@ -45,7 +48,7 @@ pdma: dma-controller@d4000000 { Marvell Two Channel DMA Controller used specifically for audio -Used platfroms: pxa688, pxa910 +Used platforms: pxa688, pxa910 Required properties: - compatible: Should be "marvell,adma-1.0" or "marvell,pxa910-squ" diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt new file mode 100644 index 000000000000..1405ed071bb4 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt @@ -0,0 +1,75 @@ +Xilinx AXI VDMA engine, it does transfers between memory and video devices. +It can be configured to have one channel or two channels. If configured +as two channels, one is to transmit to the video device and another is +to receive from the video device. + +Required properties: +- compatible: Should be "xlnx,axi-vdma-1.00.a" +- #dma-cells: Should be <1>, see "dmas" property below +- reg: Should contain VDMA registers location and length. +- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w. +- dma-channel child node: Should have at least one channel and can have up to + two channels per device. This node specifies the properties of each + DMA channel (see child node properties below). + +Optional properties: +- xlnx,include-sg: Tells configured for Scatter-mode in + the hardware. +- xlnx,flush-fsync: Tells which channel to Flush on Frame sync. + It takes following values: + {1}, flush both channels + {2}, flush mm2s channel + {3}, flush s2mm channel + +Required child node properties: +- compatible: It should be either "xlnx,axi-vdma-mm2s-channel" or + "xlnx,axi-vdma-s2mm-channel". +- interrupts: Should contain per channel VDMA interrupts. +- xlnx,data-width: Should contain the stream data width, take values + {32,64...1024}. + +Optional child node properties: +- xlnx,include-dre: Tells hardware is configured for Data + Realignment Engine. +- xlnx,genlock-mode: Tells Genlock synchronization is + enabled/disabled in hardware. + +Example: +++++++++ + +axi_vdma_0: axivdma@40030000 { + compatible = "xlnx,axi-vdma-1.00.a"; + #dma_cells = <1>; + reg = < 0x40030000 0x10000 >; + xlnx,num-fstores = <0x8>; + xlnx,flush-fsync = <0x1>; + dma-channel@40030000 { + compatible = "xlnx,axi-vdma-mm2s-channel"; + interrupts = < 0 54 4 >; + xlnx,datawidth = <0x40>; + } ; + dma-channel@40030030 { + compatible = "xlnx,axi-vdma-s2mm-channel"; + interrupts = < 0 53 4 >; + xlnx,datawidth = <0x40>; + } ; +} ; + + +* DMA client + +Required properties: +- dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs, + where Channel ID is '0' for write/tx and '1' for read/rx + channel. +- dma-names: a list of DMA channel names, one per "dmas" entry + +Example: +++++++++ + +vdmatest_0: vdmatest@0 { + compatible ="xlnx,axi-vdma-test-1.00.a"; + dmas = <&axi_vdma_0 0 + &axi_vdma_0 1>; + dma-names = "vdma0", "vdma1"; +} ; diff --git a/Documentation/devicetree/bindings/gpio/gpio_keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt index 5c2c02140a62..5c2c02140a62 100644 --- a/Documentation/devicetree/bindings/gpio/gpio_keys.txt +++ b/Documentation/devicetree/bindings/input/gpio-keys.txt diff --git a/Documentation/devicetree/bindings/input/st-keyscan.txt b/Documentation/devicetree/bindings/input/st-keyscan.txt new file mode 100644 index 000000000000..51eb428e5c85 --- /dev/null +++ b/Documentation/devicetree/bindings/input/st-keyscan.txt @@ -0,0 +1,60 @@ +* ST Keyscan controller Device Tree bindings + +The ST keyscan controller Device Tree binding is based on the +matrix-keymap. + +Required properties: +- compatible: "st,sti-keyscan" + +- reg: Register base address and size of st-keyscan controller. + +- interrupts: Interrupt number for the st-keyscan controller. + +- clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + +- pinctrl: Should specify pin control groups used for this controller. + See ../pinctrl/pinctrl-bindings.txt for details. + +- linux,keymap: The keymap for keys as described in the binding document + devicetree/bindings/input/matrix-keymap.txt. + +- keypad,num-rows: Number of row lines connected to the keypad controller. + +- keypad,num-columns: Number of column lines connected to the keypad + controller. + +Optional property: +- st,debounce_us: Debouncing interval time in microseconds + +Example: + +keyscan: keyscan@fe4b0000 { + compatible = "st,sti-keyscan"; + reg = <0xfe4b0000 0x2000>; + interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>; + clocks = <&CLK_SYSIN>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_keyscan>; + + keypad,num-rows = <4>; + keypad,num-columns = <4>; + st,debounce_us = <5000>; + + linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_F13) + MATRIX_KEY(0x00, 0x01, KEY_F9) + MATRIX_KEY(0x00, 0x02, KEY_F5) + MATRIX_KEY(0x00, 0x03, KEY_F1) + MATRIX_KEY(0x01, 0x00, KEY_F14) + MATRIX_KEY(0x01, 0x01, KEY_F10) + MATRIX_KEY(0x01, 0x02, KEY_F6) + MATRIX_KEY(0x01, 0x03, KEY_F2) + MATRIX_KEY(0x02, 0x00, KEY_F15) + MATRIX_KEY(0x02, 0x01, KEY_F11) + MATRIX_KEY(0x02, 0x02, KEY_F7) + MATRIX_KEY(0x02, 0x03, KEY_F3) + MATRIX_KEY(0x03, 0x00, KEY_F16) + MATRIX_KEY(0x03, 0x01, KEY_F12) + MATRIX_KEY(0x03, 0x02, KEY_F8) + MATRIX_KEY(0x03, 0x03, KEY_F4) >; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt new file mode 100644 index 000000000000..aef57791f40b --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt @@ -0,0 +1,20 @@ +sun4i resistive touchscreen controller +-------------------------------------- + +Required properties: + - compatible: "allwinner,sun4i-a10-ts" + - reg: mmio address range of the chip + - interrupts: interrupt to which the chip is connected + +Optional properties: + - allwinner,ts-attached: boolean indicating that an actual touchscreen is + attached to the controller + +Example: + + rtp: rtp@01c25000 { + compatible = "allwinner,sun4i-a10-ts"; + reg = <0x01c25000 0x100>; + interrupts = <29>; + allwinner,ts-attached; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt new file mode 100644 index 000000000000..d8e06163c54e --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt @@ -0,0 +1,27 @@ +General Touchscreen Properties: + +Optional properties for Touchscreens: + - touchscreen-size-x : horizontal resolution of touchscreen + (in pixels) + - touchscreen-size-y : vertical resolution of touchscreen + (in pixels) + - touchscreen-max-pressure : maximum reported pressure (arbitrary range + dependent on the controller) + - touchscreen-fuzz-x : horizontal noise value of the absolute input + device (in pixels) + - touchscreen-fuzz-y : vertical noise value of the absolute input + device (in pixels) + - touchscreen-fuzz-pressure : pressure noise value of the absolute input + device (arbitrary range dependent on the + controller) + - touchscreen-inverted-x : X axis is inverted (boolean) + - touchscreen-inverted-y : Y axis is inverted (boolean) + +Deprecated properties for Touchscreens: + - x-size : deprecated name for touchscreen-size-x + - y-size : deprecated name for touchscreen-size-y + - moving-threshold : deprecated name for a combination of + touchscreen-fuzz-x and touchscreen-fuzz-y + - contact-threshold : deprecated name for touchscreen-fuzz-pressure + - x-invert : deprecated name for touchscreen-inverted-x + - y-invert : deprecated name for touchscreen-inverted-y diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt new file mode 100644 index 000000000000..4b641c7bf1c2 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt @@ -0,0 +1,42 @@ +* Texas Instruments tsc2005 touchscreen controller + +Required properties: + - compatible : "ti,tsc2005" + - reg : SPI device address + - spi-max-frequency : Maximal SPI speed + - interrupts : IRQ specifier + - reset-gpios : GPIO specifier + - vio-supply : Regulator specifier + +Optional properties: + - ti,x-plate-ohms : integer, resistance of the touchscreen's X plates + in ohm (defaults to 280) + - ti,esd-recovery-timeout-ms : integer, if the touchscreen does not respond after + the configured time (in milli seconds), the driver + will reset it. This is disabled by default. + - properties defined in touchscreen.txt + +Example: + +&mcspi1 { + tsc2005@0 { + compatible = "ti,tsc2005"; + spi-max-frequency = <6000000>; + reg = <0>; + + vio-supply = <&vio>; + + reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ + interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */ + + touchscreen-fuzz-x = <4>; + touchscreen-fuzz-y = <7>; + touchscreen-fuzz-pressure = <2>; + touchscreen-max-x = <4096>; + touchscreen-max-y = <4096>; + touchscreen-max-pressure = <2048>; + + ti,x-plate-ohms = <280>; + ti,esd-recovery-timeout-ms = <8000>; + }; +} diff --git a/Documentation/devicetree/bindings/mfd/bfticu.txt b/Documentation/devicetree/bindings/mfd/bfticu.txt new file mode 100644 index 000000000000..65c90776c620 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/bfticu.txt @@ -0,0 +1,25 @@ +KEYMILE bfticu Chassis Management FPGA + +The bfticu is a multifunction device that manages the whole chassis. +Its main functionality is to collect IRQs from the whole chassis and signals +them to a single controller. + +Required properties: +- compatible: "keymile,bfticu" +- interrupt-controller: the bfticu FPGA is an interrupt controller +- interrupts: the main IRQ line to signal the collected IRQs +- #interrupt-cells : is 2 and their usage is compliant to the 2 cells variant + of Documentation/devicetree/bindings/interrupt-controller/interrupts.txt +- interrupt-parent: the parent IRQ ctrl the main IRQ is connected to +- reg: access on the parent local bus (chip select, offset in chip select, size) + +Example: + + chassis-mgmt@3,0 { + compatible = "keymile,bfticu"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <3 0 0x100>; + interrupt-parent = <&mpic>; + interrupts = <6 1 0 0>; + }; diff --git a/Documentation/devicetree/bindings/mfd/qriox.txt b/Documentation/devicetree/bindings/mfd/qriox.txt new file mode 100644 index 000000000000..f301e2d4ce76 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qriox.txt @@ -0,0 +1,17 @@ +KEYMILE qrio Board Control CPLD + +The qrio is a multifunction device that controls the KEYMILE boards based on +the kmp204x design. +It is consists of a reset controller, watchdog timer, LEDs, and 2 IRQ capable +GPIO blocks. + +Required properties: +- compatible: "keymile,qriox" +- reg: access on the parent local bus (chip select, offset in chip select, size) + +Example: + + board-control@1,0 { + compatible = "keymile,qriox"; + reg = <1 0 0x80>; + }; diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index 9dce540771fb..3c18001dfd5d 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -38,6 +38,8 @@ Optional properties: - mmc-highspeed-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported - mmc-hs200-1_8v: eMMC HS200 mode(1.8V I/O) is supported - mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported +- mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported +- mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line polarity properties, we have to fix the meaning of the "normal" and "inverted" diff --git a/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt b/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt new file mode 100644 index 000000000000..b63819149f22 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt @@ -0,0 +1,30 @@ +MOXA ART MMC Host Controller Interface + + Inherits from mmc binding[1]. + + [1] Documentation/devicetree/bindings/mmc/mmc.txt + +Required properties: + +- compatible : Must be "moxa,moxart-mmc" or "faraday,ftsdc010" +- reg : Should contain registers location and length +- interrupts : Should contain the interrupt number +- clocks : Should contain phandle for the clock feeding the MMC controller + +Optional properties: + +- dmas : Should contain two DMA channels, line request number must be 5 for + both channels +- dma-names : Must be "tx", "rx" + +Example: + + mmc: mmc@98e00000 { + compatible = "moxa,moxart-mmc"; + reg = <0x98e00000 0x5C>; + interrupts = <5 0>; + clocks = <&clk_apb>; + dmas = <&dma 5>, + <&dma 5>; + dma-names = "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt index 8f3f13315358..2d4a7258a10d 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt @@ -69,10 +69,6 @@ Optional properties: * supports-highspeed: Enables support for high speed cards (up to 50MHz) -* caps2-mmc-hs200-1_8v: Supports mmc HS200 SDR 1.8V mode - -* caps2-mmc-hs200-1_2v: Supports mmc HS200 SDR 1.2V mode - * broken-cd: as documented in mmc core bindings. * vmmc-supply: The phandle to the regulator to use for vmmc. If this is @@ -103,7 +99,6 @@ board specific portions as listed below. clock-freq-min-max = <400000 200000000>; num-slots = <1>; supports-highspeed; - caps2-mmc-hs200-1_8v; broken-cd; fifo-depth = <0x80>; card-detect-delay = <200>; diff --git a/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt b/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt new file mode 100644 index 000000000000..8babdaa8623b --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt @@ -0,0 +1,33 @@ +* Renesas usdhi6rol0 SD/SDIO host controller + +Required properties: + +- compatible: must be + "renesas,usdhi6rol0" +- interrupts: 3 interrupts, named "card detect", "data" and "SDIO" must be + specified +- clocks: a clock binding for the IMCLK input + +Optional properties: + +- vmmc-supply: a phandle of a regulator, supplying Vcc to the card +- vqmmc-supply: a phandle of a regulator, supplying VccQ to the card + +Additionally any standard mmc bindings from mmc.txt can be used. + +Example: + +sd0: sd@ab000000 { + compatible = "renesas,usdhi6rol0"; + reg = <0xab000000 0x200>; + interrupts = <0 23 0x4 + 0 24 0x4 + 0 25 0x4>; + interrupt-names = "card detect", "data", "SDIO"; + bus-width = <4>; + max-frequency = <50000000>; + cap-power-off-card; + clocks = <&imclk>; + vmmc-supply = <&vcc_sd0>; + vqmmc-supply = <&vccq_sd0>; +}; diff --git a/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt b/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt new file mode 100644 index 000000000000..db939210e29d --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt @@ -0,0 +1,54 @@ + +IBM Akebono board device tree +============================= + +The IBM Akebono board is a development board for the PPC476GTR SoC. + +0) The root node + + Required properties: + + - model : "ibm,akebono". + - compatible : "ibm,akebono" , "ibm,476gtr". + +1.a) The Secure Digital Host Controller Interface (SDHCI) node + + Represent the Secure Digital Host Controller Interfaces. + + Required properties: + + - compatible : should be "ibm,476gtr-sdhci","generic-sdhci". + - reg : should contain the SDHCI registers location and length. + - interrupt-parent : a phandle for the interrupt controller. + - interrupts : should contain the SDHCI interrupt. + +1.b) The Advanced Host Controller Interface (AHCI) SATA node + + Represents the advanced host controller SATA interface. + + Required properties: + + - compatible : should be "ibm,476gtr-ahci". + - reg : should contain the AHCI registers location and length. + - interrupt-parent : a phandle for the interrupt controller. + - interrupts : should contain the AHCI interrupt. + +1.c) The FPGA node + + The Akebono board stores some board information such as the revision + number in an FPGA which is represented by this node. + + Required properties: + + - compatible : should be "ibm,akebono-fpga". + - reg : should contain the FPGA registers location and length. + +1.d) The AVR node + + The Akebono board has an Atmel AVR microprocessor attached to the I2C + bus as a power controller for the board. + + Required properties: + + - compatible : should be "ibm,akebono-avr". + - reg : should contain the I2C bus address for the AVR. diff --git a/Documentation/devicetree/bindings/powerpc/4xx/hsta.txt b/Documentation/devicetree/bindings/powerpc/4xx/hsta.txt new file mode 100644 index 000000000000..c737c8338705 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/4xx/hsta.txt @@ -0,0 +1,19 @@ + +ppc476gtr High Speed Serial Assist (HSTA) node +============================================== + +The 476gtr SoC contains a high speed serial assist module attached +between the plb4 and plb6 system buses to provide high speed data +transfer between memory and system peripherals as well as support for +PCI message signalled interrupts. + +Currently only the MSI support is used by Linux using the following +device tree entries: + +Require properties: +- compatible : "ibm,476gtr-hsta-msi", "ibm,hsta-msi" +- reg : register mapping for the HSTA MSI space +- interrupt-parent : parent controller for mapping interrupts +- interrupts : ordered interrupt mapping for each MSI in the register + space. The first interrupt should be associated with a + register offset of 0x00, the second to 0x10, etc. diff --git a/Documentation/devicetree/bindings/powerpc/fsl/board.txt b/Documentation/devicetree/bindings/powerpc/fsl/board.txt index 380914e965e0..700dec4774fa 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/board.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/board.txt @@ -67,3 +67,20 @@ Example: gpio-controller; }; }; + +* Freescale on-board FPGA connected on I2C bus + +Some Freescale boards like BSC9132QDS have on board FPGA connected on +the i2c bus. + +Required properties: +- compatible: Should be a board-specific string followed by a string + indicating the type of FPGA. Example: + "fsl,<board>-fpga", "fsl,fpga-qixis-i2c" +- reg: Should contain the address of the FPGA + +Example: + fpga: fpga@66 { + compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c"; + reg = <0x66>; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ccf.txt b/Documentation/devicetree/bindings/powerpc/fsl/ccf.txt new file mode 100644 index 000000000000..454da7e08acd --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/ccf.txt @@ -0,0 +1,46 @@ +Freescale CoreNet Coherency Fabric(CCF) Device Tree Binding + +DESCRIPTION + +The CoreNet coherency fabric is a fabric-oriented, connectivity infrastructure +that enables the implementation of coherent, multicore systems. + +Required properties: + +- compatible: <string list> + fsl,corenet1-cf - CoreNet coherency fabric version 1. + Example chips: T4240, B4860 + + fsl,corenet2-cf - CoreNet coherency fabric version 2. + Example chips: P5040, P5020, P4080, P3041, P2041 + + fsl,corenet-cf - Used to represent the common registers + between CCF version 1 and CCF version 2. This compatible + is retained for compatibility reasons, as it was already + used for both CCF version 1 chips and CCF version 2 + chips. It should be specified after either + "fsl,corenet1-cf" or "fsl,corenet2-cf". + +- reg: <prop-encoded-array> + A standard property. Represents the CCF registers. + +- interrupts: <prop-encoded-array> + Interrupt mapping for CCF error interrupt. + +- fsl,ccf-num-csdids: <u32> + Specifies the number of Coherency Subdomain ID Port Mapping + Registers that are supported by the CCF. + +- fsl,ccf-num-snoopids: <u32> + Specifies the number of Snoop ID Port Mapping Registers that + are supported by CCF. + +Example: + + corenet-cf@18000 { + compatible = "fsl,corenet2-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt index 922c30ad90d1..f8cd2397aa04 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt @@ -20,3 +20,14 @@ PROPERTIES a property named fsl,eref-[CAT], where [CAT] is the abbreviated category name with all uppercase letters converted to lowercase, indicates that the category is supported by the implementation. + + - fsl,portid-mapping + Usage: optional + Value type: <u32> + Definition: The Coherency Subdomain ID Port Mapping Registers and + Snoop ID Port Mapping registers, which are part of the CoreNet + Coherency fabric (CCF), provide a CoreNet Coherency Subdomain + ID/CoreNet Snoop ID to cpu mapping functions. Certain bits from + these registers should be set if the coresponding CPU should be + snooped. This property defines a bitmask which selects the bit + that should be set if this cpu should be snooped. diff --git a/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt b/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt index 1f5e329f756c..c2b2899885f2 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt @@ -34,6 +34,15 @@ Optional properties: for legacy drivers. - interrupt-parent : <phandle> Phandle to interrupt controller +- fsl,portid-mapping : <u32> + The Coherency Subdomain ID Port Mapping Registers and + Snoop ID Port Mapping registers, which are part of the + CoreNet Coherency fabric (CCF), provide a CoreNet + Coherency Subdomain ID/CoreNet Snoop ID to pamu mapping + functions. Certain bits from these registers should be + set if PAMUs should be snooped. This property defines + a bitmask which selects the bits that should be set if + PAMUs should be snooped. Child nodes: @@ -88,6 +97,7 @@ Example: compatible = "fsl,pamu-v1.0", "fsl,pamu"; reg = <0x20000 0x5000>; ranges = <0 0x20000 0x5000>; + fsl,portid-mapping = <0xf80000>; #address-cells = <1>; #size-cells = <1>; interrupts = < diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 5261271046ce..4d7f3758d1b4 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -142,3 +142,4 @@ wm Wondermedia Technologies, Inc. xes Extreme Engineering Solutions (X-ES) xlnx Xilinx zyxel ZyXEL Communications Corp. +zarlink Zarlink Semiconductor diff --git a/Documentation/filesystems/f2fs.txt b/Documentation/filesystems/f2fs.txt index 25311e113e75..51afba17bbae 100644 --- a/Documentation/filesystems/f2fs.txt +++ b/Documentation/filesystems/f2fs.txt @@ -461,11 +461,11 @@ The number of blocks and buckets are determined by, # of blocks in level #n = | `- 4, Otherwise - ,- 2^ (n + dir_level), - | if n < MAX_DIR_HASH_DEPTH / 2, + ,- 2^(n + dir_level), + | if n + dir_level < MAX_DIR_HASH_DEPTH / 2, # of buckets in level #n = | - `- 2^((MAX_DIR_HASH_DEPTH / 2 + dir_level) - 1), - Otherwise + `- 2^((MAX_DIR_HASH_DEPTH / 2) - 1), + Otherwise When F2FS finds a file name in a directory, at first a hash value of the file name is calculated. Then, F2FS scans the hash table in level #0 to find the diff --git a/Documentation/filesystems/nfs/nfs41-server.txt b/Documentation/filesystems/nfs/nfs41-server.txt index b930ad087780..c49cd7e796e7 100644 --- a/Documentation/filesystems/nfs/nfs41-server.txt +++ b/Documentation/filesystems/nfs/nfs41-server.txt @@ -176,7 +176,5 @@ Nonstandard compound limitations: ca_maxrequestsize request and a ca_maxresponsesize reply, so we may fail to live up to the promise we made in CREATE_SESSION fore channel negotiation. -* No more than one read-like operation allowed per compound; encoding - replies that cross page boundaries (except for read data) not handled. See also http://wiki.linux-nfs.org/wiki/index.php/Server_4.0_and_4.1_issues. diff --git a/Documentation/platform/x86-laptop-drivers.txt b/Documentation/platform/x86-laptop-drivers.txt new file mode 100644 index 000000000000..01facd2590bb --- /dev/null +++ b/Documentation/platform/x86-laptop-drivers.txt @@ -0,0 +1,18 @@ +compal-laptop +============= +List of supported hardware: + +by Compal: + Compal FL90/IFL90 + Compal FL91/IFL91 + Compal FL92/JFL92 + Compal FT00/IFT00 + +by Dell: + Dell Vostro 1200 + Dell Mini 9 (Inspiron 910) + Dell Mini 10 (Inspiron 1010) + Dell Mini 10v (Inspiron 1011) + Dell Mini 1012 (Inspiron 1012) + Dell Inspiron 11z (Inspiron 1110) + Dell Mini 12 (Inspiron 1210) diff --git a/Documentation/powerpc/cpu_families.txt b/Documentation/powerpc/cpu_families.txt new file mode 100644 index 000000000000..fc08e22feb1a --- /dev/null +++ b/Documentation/powerpc/cpu_families.txt @@ -0,0 +1,221 @@ +CPU Families +============ + +This document tries to summarise some of the different cpu families that exist +and are supported by arch/powerpc. + + +Book3S (aka sPAPR) +------------------ + + - Hash MMU + - Mix of 32 & 64 bit + + +--------------+ +----------------+ + | Old POWER | --------------> | RS64 (threads) | + +--------------+ +----------------+ + | + | + v + +--------------+ +----------------+ +------+ + | 601 | --------------> | 603 | ---> | e300 | + +--------------+ +----------------+ +------+ + | | + | | + v v + +--------------+ +----------------+ +-------+ + | 604 | | 750 (G3) | ---> | 750CX | + +--------------+ +----------------+ +-------+ + | | | + | | | + v v v + +--------------+ +----------------+ +-------+ + | 620 (64 bit) | | 7400 | | 750CL | + +--------------+ +----------------+ +-------+ + | | | + | | | + v v v + +--------------+ +----------------+ +-------+ + | POWER3/630 | | 7410 | | 750FX | + +--------------+ +----------------+ +-------+ + | | + | | + v v + +--------------+ +----------------+ + | POWER3+ | | 7450 | + +--------------+ +----------------+ + | | + | | + v v + +--------------+ +----------------+ + | POWER4 | | 7455 | + +--------------+ +----------------+ + | | + | | + v v + +--------------+ +-------+ +----------------+ + | POWER4+ | --> | 970 | | 7447 | + +--------------+ +-------+ +----------------+ + | | | + | | | + v v v + +--------------+ +-------+ +----------------+ + | POWER5 | | 970FX | | 7448 | + +--------------+ +-------+ +----------------+ + | | | + | | | + v v v + +--------------+ +-------+ +----------------+ + | POWER5+ | | 970MP | | e600 | + +--------------+ +-------+ +----------------+ + | + | + v + +--------------+ + | POWER5++ | + +--------------+ + | + | + v + +--------------+ +-------+ + | POWER6 | <-?-> | Cell | + +--------------+ +-------+ + | + | + v + +--------------+ + | POWER7 | + +--------------+ + | + | + v + +--------------+ + | POWER7+ | + +--------------+ + | + | + v + +--------------+ + | POWER8 | + +--------------+ + + + +---------------+ + | PA6T (64 bit) | + +---------------+ + + +IBM BookE +--------- + + - Software loaded TLB. + - All 32 bit + + +--------------+ + | 401 | + +--------------+ + | + | + v + +--------------+ + | 403 | + +--------------+ + | + | + v + +--------------+ + | 405 | + +--------------+ + | + | + v + +--------------+ + | 440 | + +--------------+ + | + | + v + +--------------+ +----------------+ + | 450 | --> | BG/P | + +--------------+ +----------------+ + | + | + v + +--------------+ + | 460 | + +--------------+ + | + | + v + +--------------+ + | 476 | + +--------------+ + + +Motorola/Freescale 8xx +---------------------- + + - Software loaded with hardware assist. + - All 32 bit + + +-------------+ + | MPC8xx Core | + +-------------+ + + +Freescale BookE +--------------- + + - Software loaded TLB. + - e6500 adds HW loaded indirect TLB entries. + - Mix of 32 & 64 bit + + +--------------+ + | e200 | + +--------------+ + + + +--------------------------------+ + | e500 | + +--------------------------------+ + | + | + v + +--------------------------------+ + | e500v2 | + +--------------------------------+ + | + | + v + +--------------------------------+ + | e500mc (Book3e) | + +--------------------------------+ + | + | + v + +--------------------------------+ + | e5500 (64 bit) | + +--------------------------------+ + | + | + v + +--------------------------------+ + | e6500 (HW TLB) (Multithreaded) | + +--------------------------------+ + + +IBM A2 core +----------- + + - Book3E, software loaded TLB + HW loaded indirect TLB entries. + - 64 bit + + +--------------+ +----------------+ + | A2 core | --> | WSP | + +--------------+ +----------------+ + | + | + v + +--------------+ + | BG/Q | + +--------------+ diff --git a/Documentation/scsi/LICENSE.qla2xxx b/Documentation/scsi/LICENSE.qla2xxx index 5020b7b5a244..52f0b4359234 100644 --- a/Documentation/scsi/LICENSE.qla2xxx +++ b/Documentation/scsi/LICENSE.qla2xxx @@ -1,4 +1,4 @@ -Copyright (c) 2003-2013 QLogic Corporation +Copyright (c) 2003-2014 QLogic Corporation QLogic Linux FC-FCoE Driver This program includes a device driver for Linux 3.x. diff --git a/Documentation/security/Smack.txt b/Documentation/security/Smack.txt index 5ea996f21d6c..b6ef7e9dba30 100644 --- a/Documentation/security/Smack.txt +++ b/Documentation/security/Smack.txt @@ -204,6 +204,16 @@ onlycap these capabilities are effective at for processes with any label. The value is set by writing the desired label to the file or cleared by writing "-" to the file. +ptrace + This is used to define the current ptrace policy + 0 - default: this is the policy that relies on smack access rules. + For the PTRACE_READ a subject needs to have a read access on + object. For the PTRACE_ATTACH a read-write access is required. + 1 - exact: this is the policy that limits PTRACE_ATTACH. Attach is + only allowed when subject's and object's labels are equal. + PTRACE_READ is not affected. Can be overriden with CAP_SYS_PTRACE. + 2 - draconian: this policy behaves like the 'exact' above with an + exception that it can't be overriden with CAP_SYS_PTRACE. revoke-subject Writing a Smack label here sets the access to '-' for all access rules with that subject label. diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt index bd365988e8d8..2479b2a0c77c 100644 --- a/Documentation/trace/ftrace.txt +++ b/Documentation/trace/ftrace.txt @@ -2003,6 +2003,32 @@ want, depending on your needs. 360.774530 | 1) 0.594 us | __phys_addr(); +The function name is always displayed after the closing bracket +for a function if the start of that function is not in the +trace buffer. + +Display of the function name after the closing bracket may be +enabled for functions whose start is in the trace buffer, +allowing easier searching with grep for function durations. +It is default disabled. + + hide: echo nofuncgraph-tail > trace_options + show: echo funcgraph-tail > trace_options + + Example with nofuncgraph-tail (default): + 0) | putname() { + 0) | kmem_cache_free() { + 0) 0.518 us | __phys_addr(); + 0) 1.757 us | } + 0) 2.861 us | } + + Example with funcgraph-tail: + 0) | putname() { + 0) | kmem_cache_free() { + 0) 0.518 us | __phys_addr(); + 0) 1.757 us | } /* kmem_cache_free() */ + 0) 2.861 us | } /* putname() */ + You can put some comments on specific functions by using trace_printk() For example, if you want to put a comment inside the __might_sleep() function, you just have to include diff --git a/Documentation/trace/tracepoints.txt b/Documentation/trace/tracepoints.txt index 6b018b53177a..a3efac621c5a 100644 --- a/Documentation/trace/tracepoints.txt +++ b/Documentation/trace/tracepoints.txt @@ -115,6 +115,30 @@ If the tracepoint has to be used in kernel modules, an EXPORT_TRACEPOINT_SYMBOL_GPL() or EXPORT_TRACEPOINT_SYMBOL() can be used to export the defined tracepoints. +If you need to do a bit of work for a tracepoint parameter, and +that work is only used for the tracepoint, that work can be encapsulated +within an if statement with the following: + + if (trace_foo_bar_enabled()) { + int i; + int tot = 0; + + for (i = 0; i < count; i++) + tot += calculate_nuggets(); + + trace_foo_bar(tot); + } + +All trace_<tracepoint>() calls have a matching trace_<tracepoint>_enabled() +function defined that returns true if the tracepoint is enabled and +false otherwise. The trace_<tracepoint>() should always be within the +block of the if (trace_<tracepoint>_enabled()) to prevent races between +the tracepoint being enabled and the check being seen. + +The advantage of using the trace_<tracepoint>_enabled() is that it uses +the static_key of the tracepoint to allow the if statement to be implemented +with jump labels and avoid conditional branches. + Note: The convenience macro TRACE_EVENT provides an alternative way to define tracepoints. Check http://lwn.net/Articles/379903, http://lwn.net/Articles/381064 and http://lwn.net/Articles/383362 |