summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/DocBook/device-drivers.tmpl36
-rw-r--r--Documentation/networking/dsa/dsa.txt17
-rw-r--r--Documentation/networking/ip-sysctl.txt8
3 files changed, 47 insertions, 14 deletions
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index de79efdad46c..8c68768ebee5 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -128,16 +128,44 @@ X!Edrivers/base/interface.c
!Edrivers/base/platform.c
!Edrivers/base/bus.c
</sect1>
- <sect1><title>Device Drivers DMA Management</title>
+ <sect1>
+ <title>Buffer Sharing and Synchronization</title>
+ <para>
+ The dma-buf subsystem provides the framework for sharing buffers
+ for hardware (DMA) access across multiple device drivers and
+ subsystems, and for synchronizing asynchronous hardware access.
+ </para>
+ <para>
+ This is used, for example, by drm "prime" multi-GPU support, but
+ is of course not limited to GPU use cases.
+ </para>
+ <para>
+ The three main components of this are: (1) dma-buf, representing
+ a sg_table and exposed to userspace as a file descriptor to allow
+ passing between devices, (2) fence, which provides a mechanism
+ to signal when one device as finished access, and (3) reservation,
+ which manages the shared or exclusive fence(s) associated with
+ the buffer.
+ </para>
+ <sect2><title>dma-buf</title>
!Edrivers/dma-buf/dma-buf.c
+!Iinclude/linux/dma-buf.h
+ </sect2>
+ <sect2><title>reservation</title>
+!Pdrivers/dma-buf/reservation.c Reservation Object Overview
+!Edrivers/dma-buf/reservation.c
+!Iinclude/linux/reservation.h
+ </sect2>
+ <sect2><title>fence</title>
!Edrivers/dma-buf/fence.c
-!Edrivers/dma-buf/seqno-fence.c
!Iinclude/linux/fence.h
+!Edrivers/dma-buf/seqno-fence.c
!Iinclude/linux/seqno-fence.h
-!Edrivers/dma-buf/reservation.c
-!Iinclude/linux/reservation.h
!Edrivers/dma-buf/sync_file.c
!Iinclude/linux/sync_file.h
+ </sect2>
+ </sect1>
+ <sect1><title>Device Drivers DMA Management</title>
!Edrivers/base/dma-coherent.c
!Edrivers/base/dma-mapping.c
</sect1>
diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt
index 631b0f7ae16f..9d05ed7f7da5 100644
--- a/Documentation/networking/dsa/dsa.txt
+++ b/Documentation/networking/dsa/dsa.txt
@@ -369,8 +369,6 @@ does not allocate any driver private context space.
Switch configuration
--------------------
-- priv_size: additional size needed by the switch driver for its private context
-
- tag_protocol: this is to indicate what kind of tagging protocol is supported,
should be a valid value from the dsa_tag_protocol enum
@@ -416,11 +414,6 @@ PHY devices and link management
to the switch port MDIO registers. If unavailable return a negative error
code.
-- poll_link: Function invoked by DSA to query the link state of the switch
- builtin Ethernet PHYs, per port. This function is responsible for calling
- netif_carrier_{on,off} when appropriate, and can be used to poll all ports in a
- single call. Executes from workqueue context.
-
- adjust_link: Function invoked by the PHY library when a slave network device
is attached to a PHY device. This function is responsible for appropriately
configuring the switch port link parameters: speed, duplex, pause based on
@@ -542,6 +535,16 @@ Bridge layer
Bridge VLAN filtering
---------------------
+- port_vlan_filtering: bridge layer function invoked when the bridge gets
+ configured for turning on or off VLAN filtering. If nothing specific needs to
+ be done at the hardware level, this callback does not need to be implemented.
+ When VLAN filtering is turned on, the hardware must be programmed with
+ rejecting 802.1Q frames which have VLAN IDs outside of the programmed allowed
+ VLAN ID map/rules. If there is no PVID programmed into the switch port,
+ untagged frames must be rejected as well. When turned off the switch must
+ accept any 802.1Q frames irrespective of their VLAN ID, and untagged frames are
+ allowed.
+
- port_vlan_prepare: bridge layer function invoked when the bridge prepares the
configuration of a VLAN on the given port. If the operation is not supported
by the hardware, this function should return -EOPNOTSUPP to inform the bridge
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 6c7f365b1515..9ae929395b24 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -1036,15 +1036,17 @@ proxy_arp_pvlan - BOOLEAN
shared_media - BOOLEAN
Send(router) or accept(host) RFC1620 shared media redirects.
- Overrides ip_secure_redirects.
+ Overrides secure_redirects.
shared_media for the interface will be enabled if at least one of
conf/{all,interface}/shared_media is set to TRUE,
it will be disabled otherwise
default TRUE
secure_redirects - BOOLEAN
- Accept ICMP redirect messages only for gateways,
- listed in default gateway list.
+ Accept ICMP redirect messages only to gateways listed in the
+ interface's current gateway list. Even if disabled, RFC1122 redirect
+ rules still apply.
+ Overridden by shared_media.
secure_redirects for the interface will be enabled if at least one of
conf/{all,interface}/secure_redirects is set to TRUE,
it will be disabled otherwise