diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/cputopology.txt | 6 | ||||
| -rw-r--r-- | Documentation/filesystems/squashfs.txt | 2 | ||||
| -rw-r--r-- | Documentation/ftrace.txt | 2 | ||||
| -rw-r--r-- | Documentation/kernel-parameters.txt | 7 | ||||
| -rw-r--r-- | Documentation/x86/boot.txt | 18 | ||||
| -rw-r--r-- | Documentation/x86/earlyprintk.txt | 101 |
6 files changed, 123 insertions, 13 deletions
diff --git a/Documentation/cputopology.txt b/Documentation/cputopology.txt index 45932ec21cee..b41f3e58aefa 100644 --- a/Documentation/cputopology.txt +++ b/Documentation/cputopology.txt @@ -18,11 +18,11 @@ For an architecture to support this feature, it must define some of these macros in include/asm-XXX/topology.h: #define topology_physical_package_id(cpu) #define topology_core_id(cpu) -#define topology_thread_siblings(cpu) -#define topology_core_siblings(cpu) +#define topology_thread_cpumask(cpu) +#define topology_core_cpumask(cpu) The type of **_id is int. -The type of siblings is cpumask_t. +The type of siblings is (const) struct cpumask *. To be consistent on all architectures, include/linux/topology.h provides default definitions for any of the above macros that are diff --git a/Documentation/filesystems/squashfs.txt b/Documentation/filesystems/squashfs.txt index 3e79e4a7a392..b324c033035a 100644 --- a/Documentation/filesystems/squashfs.txt +++ b/Documentation/filesystems/squashfs.txt @@ -22,7 +22,7 @@ Squashfs filesystem features versus Cramfs: Squashfs Cramfs -Max filesystem size: 2^64 16 MiB +Max filesystem size: 2^64 256 MiB Max file size: ~ 2 TiB 16 MiB Max files: unlimited unlimited Max directories: unlimited unlimited diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt index 22614bef6359..fd9a3e693813 100644 --- a/Documentation/ftrace.txt +++ b/Documentation/ftrace.txt @@ -100,7 +100,7 @@ of ftrace. Here is a list of some of the key files: that is displayed in one of the above output files. - trace_max_latency: + tracing_max_latency: Some of the tracers record the max latency. For example, the time interrupts are disabled. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index d1cb2069e2f4..454f42b21f16 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1320,8 +1320,13 @@ and is between 256 and 4096 characters. It is defined in the file memtest= [KNL,X86] Enable memtest Format: <integer> - range: 0,4 : pattern number default : 0 <disable> + Specifies the number of memtest passes to be + performed. Each pass selects another test + pattern from a given set of patterns. Memtest + fills the memory with this pattern, validates + memory contents and reserves bad memory + regions that are detected. meye.*= [HW] Set MotionEye Camera parameters See Documentation/video4linux/meye.txt. diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index 7b4596ac4120..e0203662f9e9 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -158,7 +158,7 @@ Offset Proto Name Meaning 0202/4 2.00+ header Magic signature "HdrS" 0206/2 2.00+ version Boot protocol version supported 0208/4 2.00+ realmode_swtch Boot loader hook (see below) -020C/2 2.00+ start_sys The load-low segment (0x1000) (obsolete) +020C/2 2.00+ start_sys_seg The load-low segment (0x1000) (obsolete) 020E/2 2.00+ kernel_version Pointer to kernel version string 0210/1 2.00+ type_of_loader Boot loader identifier 0211/1 2.00+ loadflags Boot protocol option flags @@ -170,10 +170,11 @@ Offset Proto Name Meaning 0224/2 2.01+ heap_end_ptr Free memory after setup end 0226/2 N/A pad1 Unused 0228/4 2.02+ cmd_line_ptr 32-bit pointer to the kernel command line -022C/4 2.03+ initrd_addr_max Highest legal initrd address +022C/4 2.03+ ramdisk_max Highest legal initrd address 0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel 0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not -0235/3 N/A pad2 Unused +0235/1 N/A pad2 Unused +0236/2 N/A pad3 Unused 0238/4 2.06+ cmdline_size Maximum size of the kernel command line 023C/4 2.07+ hardware_subarch Hardware subarchitecture 0240/8 2.07+ hardware_subarch_data Subarchitecture-specific data @@ -299,14 +300,14 @@ Protocol: 2.00+ e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version 10.17. -Field name: readmode_swtch +Field name: realmode_swtch Type: modify (optional) Offset/size: 0x208/4 Protocol: 2.00+ Boot loader hook (see ADVANCED BOOT LOADER HOOKS below.) -Field name: start_sys +Field name: start_sys_seg Type: read Offset/size: 0x20c/2 Protocol: 2.00+ @@ -468,7 +469,7 @@ Protocol: 2.02+ zero, the kernel will assume that your boot loader does not support the 2.02+ protocol. -Field name: initrd_addr_max +Field name: ramdisk_max Type: read Offset/size: 0x22c/4 Protocol: 2.03+ @@ -542,7 +543,10 @@ Protocol: 2.08+ The payload may be compressed. The format of both the compressed and uncompressed data should be determined using the standard magic - numbers. Currently only gzip compressed ELF is used. + numbers. The currently supported compression formats are gzip + (magic numbers 1F 8B or 1F 9E), bzip2 (magic number 42 5A) and LZMA + (magic number 5D 00). The uncompressed payload is currently always ELF + (magic number 7F 45 4C 46). Field name: payload_length Type: read diff --git a/Documentation/x86/earlyprintk.txt b/Documentation/x86/earlyprintk.txt new file mode 100644 index 000000000000..607b1a016064 --- /dev/null +++ b/Documentation/x86/earlyprintk.txt @@ -0,0 +1,101 @@ + +Mini-HOWTO for using the earlyprintk=dbgp boot option with a +USB2 Debug port key and a debug cable, on x86 systems. + +You need two computers, the 'USB debug key' special gadget and +and two USB cables, connected like this: + + [host/target] <-------> [USB debug key] <-------> [client/console] + +1. There are three specific hardware requirements: + + a.) Host/target system needs to have USB debug port capability. + + You can check this capability by looking at a 'Debug port' bit in + the lspci -vvv output: + + # lspci -vvv + ... + 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI]) + Subsystem: Lenovo ThinkPad T61 + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0 + Interrupt: pin D routed to IRQ 19 + Region 0: Memory at fe227000 (32-bit, non-prefetchable) [size=1K] + Capabilities: [50] Power Management version 2 + Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) + Status: D0 PME-Enable- DSel=0 DScale=0 PME+ + Capabilities: [58] Debug port: BAR=1 offset=00a0 + ^^^^^^^^^^^ <==================== [ HERE ] + Kernel driver in use: ehci_hcd + Kernel modules: ehci-hcd + ... + +( If your system does not list a debug port capability then you probably + wont be able to use the USB debug key. ) + + b.) You also need a Netchip USB debug cable/key: + + http://www.plxtech.com/products/NET2000/NET20DC/default.asp + + This is a small blue plastic connector with two USB connections, + it draws power from its USB connections. + + c.) Thirdly, you need a second client/console system with a regular USB port. + +2. Software requirements: + + a.) On the host/target system: + + You need to enable the following kernel config option: + + CONFIG_EARLY_PRINTK_DBGP=y + + And you need to add the boot command line: "earlyprintk=dbgp". + (If you are using Grub, append it to the 'kernel' line in + /etc/grub.conf) + + NOTE: normally earlyprintk console gets turned off once the + regular console is alive - use "earlyprintk=dbgp,keep" to keep + this channel open beyond early bootup. This can be useful for + debugging crashes under Xorg, etc. + + b.) On the client/console system: + + You should enable the following kernel config option: + + CONFIG_USB_SERIAL_DEBUG=y + + On the next bootup with the modified kernel you should + get a /dev/ttyUSBx device(s). + + Now this channel of kernel messages is ready to be used: start + your favorite terminal emulator (minicom, etc.) and set + it up to use /dev/ttyUSB0 - or use a raw 'cat /dev/ttyUSBx' to + see the raw output. + + c.) On Nvidia Southbridge based systems: the kernel will try to probe + and find out which port has debug device connected. + +3. Testing that it works fine: + + You can test the output by using earlyprintk=dbgp,keep and provoking + kernel messages on the host/target system. You can provoke a harmless + kernel message by for example doing: + + echo h > /proc/sysrq-trigger + + On the host/target system you should see this help line in "dmesg" output: + + SysRq : HELP : loglevel(0-9) reBoot Crashdump terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z) + + On the client/console system do: + + cat /dev/ttyUSB0 + + And you should see the help line above displayed shortly after you've + provoked it on the host system. + +If it does not work then please ask about it on the linux-kernel@vger.kernel.org +mailing list or contact the x86 maintainers. |