diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/powerpc/booting-without-of.txt | 72 |
1 files changed, 72 insertions, 0 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index d02c64953dcd..ee551c6ea235 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1365,6 +1365,78 @@ platforms are moved over to use the flattened-device-tree model. }; + g) Freescale SOC SEC Security Engines + + Required properties: + + - device_type : Should be "crypto" + - model : Model of the device. Should be "SEC1" or "SEC2" + - compatible : Should be "talitos" + - reg : Offset and length of the register set for the device + - interrupts : <a b> where a is the interrupt number and b is a + field that represents an encoding of the sense and level + information for the interrupt. This should be encoded based on + the information in section 2) depending on the type of interrupt + controller you have. + - interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + - num-channels : An integer representing the number of channels + available. + - channel-fifo-len : An integer representing the number of + descriptor pointers each channel fetch fifo can hold. + - exec-units-mask : The bitmask representing what execution units + (EUs) are available. It's a single 32 bit cell. EU information + should be encoded following the SEC's Descriptor Header Dword + EU_SEL0 field documentation, i.e. as follows: + + bit 0 = reserved - should be 0 + bit 1 = set if SEC has the ARC4 EU (AFEU) + bit 2 = set if SEC has the DES/3DES EU (DEU) + bit 3 = set if SEC has the message digest EU (MDEU) + bit 4 = set if SEC has the random number generator EU (RNG) + bit 5 = set if SEC has the public key EU (PKEU) + bit 6 = set if SEC has the AES EU (AESU) + bit 7 = set if SEC has the Kasumi EU (KEU) + + bits 8 through 31 are reserved for future SEC EUs. + + - descriptor-types-mask : The bitmask representing what descriptors + are available. It's a single 32 bit cell. Descriptor type + information should be encoded following the SEC's Descriptor + Header Dword DESC_TYPE field documentation, i.e. as follows: + + bit 0 = set if SEC supports the aesu_ctr_nonsnoop desc. type + bit 1 = set if SEC supports the ipsec_esp descriptor type + bit 2 = set if SEC supports the common_nonsnoop desc. type + bit 3 = set if SEC supports the 802.11i AES ccmp desc. type + bit 4 = set if SEC supports the hmac_snoop_no_afeu desc. type + bit 5 = set if SEC supports the srtp descriptor type + bit 6 = set if SEC supports the non_hmac_snoop_no_afeu desc.type + bit 7 = set if SEC supports the pkeu_assemble descriptor type + bit 8 = set if SEC supports the aesu_key_expand_output desc.type + bit 9 = set if SEC supports the pkeu_ptmul descriptor type + bit 10 = set if SEC supports the common_nonsnoop_afeu desc. type + bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor type + + ..and so on and so forth. + + Example: + + /* MPC8548E */ + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 10000>; + interrupts = <1d 3>; + interrupt-parent = <40000>; + num-channels = <4>; + channel-fifo-len = <24>; + exec-units-mask = <000000fe>; + descriptor-types-mask = <073f1127>; + }; + + More devices will be defined as this spec matures. |