diff options
Diffstat (limited to 'Documentation')
23 files changed, 183 insertions, 146 deletions
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index b638e50cf8f6..2f7fd4360848 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -50,7 +50,9 @@ <sect1><title>Delaying, scheduling, and timer routines</title> !Iinclude/linux/sched.h -!Ekernel/sched.c +!Ekernel/sched/core.c +!Ikernel/sched/cpupri.c +!Ikernel/sched/fair.c !Iinclude/linux/completion.h !Ekernel/timer.c </sect1> @@ -216,7 +218,6 @@ X!Isound/sound_firmware.c <chapter id="uart16x50"> <title>16x50 UART Driver</title> -!Iinclude/linux/serial_core.h !Edrivers/tty/serial/serial_core.c !Edrivers/tty/serial/8250.c </chapter> diff --git a/Documentation/DocBook/deviceiobook.tmpl b/Documentation/DocBook/deviceiobook.tmpl index c1ed6a49e598..54199a0dcf9a 100644 --- a/Documentation/DocBook/deviceiobook.tmpl +++ b/Documentation/DocBook/deviceiobook.tmpl @@ -317,7 +317,7 @@ CPU B: spin_unlock_irqrestore(&dev_lock, flags) <chapter id="pubfunctions"> <title>Public Functions Provided</title> !Iarch/x86/include/asm/io.h -!Elib/iomap.c +!Elib/pci_iomap.c </chapter> </book> diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml index ffee1fbbc001..c7a4ca517859 100644 --- a/Documentation/DocBook/media/dvb/dvbproperty.xml +++ b/Documentation/DocBook/media/dvb/dvbproperty.xml @@ -163,14 +163,16 @@ get/set up to 64 properties. The actual meaning of each property is described on <section id="DTV-FREQUENCY"> <title><constant>DTV_FREQUENCY</constant></title> - <para>Central frequency of the channel, in HZ.</para> + <para>Central frequency of the channel.</para> <para>Notes:</para> - <para>1)For ISDB-T, the channels are usually transmitted with an offset of 143kHz. + <para>1)For satellital delivery systems, it is measured in kHz. + For the other ones, it is measured in Hz.</para> + <para>2)For ISDB-T, the channels are usually transmitted with an offset of 143kHz. E.g. a valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of the channel which is 6MHz.</para> - <para>2)As in ISDB-Tsb the channel consists of only one or three segments the + <para>3)As in ISDB-Tsb the channel consists of only one or three segments the frequency step is 429kHz, 3*429 respectively. As for ISDB-T the central frequency of the channel is expected.</para> </section> @@ -735,14 +737,10 @@ typedef enum fe_hierarchy { <listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem> <listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem> <listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem> - <listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem> <listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem> <listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem> - <listitem><para><link linkend="DTV-CODE-RATE-HP"><constant>DTV_CODE_RATE_HP</constant></link></para></listitem> - <listitem><para><link linkend="DTV-CODE-RATE-LP"><constant>DTV_CODE_RATE_LP</constant></link></para></listitem> <listitem><para><link linkend="DTV-GUARD-INTERVAL"><constant>DTV_GUARD_INTERVAL</constant></link></para></listitem> <listitem><para><link linkend="DTV-TRANSMISSION-MODE"><constant>DTV_TRANSMISSION_MODE</constant></link></para></listitem> - <listitem><para><link linkend="DTV-HIERARCHY"><constant>DTV_HIERARCHY</constant></link></para></listitem> <listitem><para><link linkend="DTV-ISDBT-LAYER-ENABLED"><constant>DTV_ISDBT_LAYER_ENABLED</constant></link></para></listitem> <listitem><para><link linkend="DTV-ISDBT-PARTIAL-RECEPTION"><constant>DTV_ISDBT_PARTIAL_RECEPTION</constant></link></para></listitem> <listitem><para><link linkend="DTV-ISDBT-SOUND-BROADCASTING"><constant>DTV_ISDBT_SOUND_BROADCASTING</constant></link></para></listitem> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml index 6f1f9a629dc3..b17a7aac6997 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml @@ -183,7 +183,12 @@ applications must set the array to zero.</entry> <entry>__u32</entry> <entry><structfield>ctrl_class</structfield></entry> <entry>The control class to which all controls belong, see -<xref linkend="ctrl-class" />.</entry> +<xref linkend="ctrl-class" />. Drivers that use a kernel framework for handling +controls will also accept a value of 0 here, meaning that the controls can +belong to any control class. Whether drivers support this can be tested by setting +<structfield>ctrl_class</structfield> to 0 and calling <constant>VIDIOC_TRY_EXT_CTRLS</constant> +with a <structfield>count</structfield> of 0. If that succeeds, then the driver +supports this feature.</entry> </row> <row> <entry>__u32</entry> @@ -194,10 +199,13 @@ also be zero.</entry> <row> <entry>__u32</entry> <entry><structfield>error_idx</structfield></entry> - <entry>Set by the driver in case of an error. It is the -index of the control causing the error or equal to 'count' when the -error is not associated with a particular control. Undefined when the -ioctl returns 0 (success).</entry> + <entry>Set by the driver in case of an error. If it is equal +to <structfield>count</structfield>, then no actual changes were made to +controls. In other words, the error was not associated with setting a particular +control. If it is another value, then only the controls up to <structfield>error_idx-1</structfield> +were modified and control <structfield>error_idx</structfield> is the one that +caused the error. The <structfield>error_idx</structfield> value is undefined +if the ioctl returned 0 (success).</entry> </row> <row> <entry>__u32</entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml index 93817f337033..7c63815e7afd 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml @@ -364,15 +364,20 @@ capability and it is cleared otherwise.</entry> <row> <entry><constant>V4L2_FBUF_FLAG_OVERLAY</constant></entry> <entry>0x0002</entry> - <entry>The frame buffer is an overlay surface the same -size as the capture. [?]</entry> - </row> - <row> - <entry spanname="hspan">The purpose of -<constant>V4L2_FBUF_FLAG_OVERLAY</constant> was never quite clear. -Most drivers seem to ignore this flag. For compatibility with the -<wordasword>bttv</wordasword> driver applications should set the -<constant>V4L2_FBUF_FLAG_OVERLAY</constant> flag.</entry> + <entry>If this flag is set for a video capture device, then the +driver will set the initial overlay size to cover the full framebuffer size, +otherwise the existing overlay size (as set by &VIDIOC-S-FMT;) will be used. + +Only one video capture driver (bttv) supports this flag. The use of this flag +for capture devices is deprecated. There is no way to detect which drivers +support this flag, so the only reliable method of setting the overlay size is +through &VIDIOC-S-FMT;. + +If this flag is set for a video output device, then the video output overlay +window is relative to the top-left corner of the framebuffer and restricted +to the size of the framebuffer. If it is cleared, then the video output +overlay window is relative to the video output display. + </entry> </row> <row> <entry><constant>V4L2_FBUF_FLAG_CHROMAKEY</constant></entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml b/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml index 16431813bebd..66e9a5257861 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml @@ -98,8 +98,11 @@ the &v4l2-output; <structfield>modulator</structfield> field and the <entry>&v4l2-tuner-type;</entry> <entry><structfield>type</structfield></entry> <entry>The tuner type. This is the same value as in the -&v4l2-tuner; <structfield>type</structfield> field. The field is not -applicable to modulators, &ie; ignored by drivers.</entry> +&v4l2-tuner; <structfield>type</structfield> field. The type must be set +to <constant>V4L2_TUNER_RADIO</constant> for <filename>/dev/radioX</filename> +device nodes, and to <constant>V4L2_TUNER_ANALOG_TV</constant> +for all others. The field is not applicable to modulators, &ie; ignored +by drivers.</entry> </row> <row> <entry>__u32</entry> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-input.xml b/Documentation/DocBook/media/v4l/vidioc-g-input.xml index 08ae82f131f2..1d43065090dd 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-input.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-input.xml @@ -61,8 +61,8 @@ desired input in an integer and call the <constant>VIDIOC_S_INPUT</constant> ioctl with a pointer to this integer. Side effects are possible. For example inputs may support different video standards, so the driver may implicitly switch the -current standard. It is good practice to select an input before -querying or negotiating any other parameters.</para> +current standard. Because of these possible side effects applications +must select an input before querying or negotiating any other parameters.</para> <para>Information about video inputs is available using the &VIDIOC-ENUMINPUT; ioctl.</para> diff --git a/Documentation/DocBook/media/v4l/vidioc-g-output.xml b/Documentation/DocBook/media/v4l/vidioc-g-output.xml index fd45f1c13ccf..4533068ecb8a 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-output.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-output.xml @@ -61,8 +61,9 @@ desired output in an integer and call the <constant>VIDIOC_S_OUTPUT</constant> ioctl with a pointer to this integer. Side effects are possible. For example outputs may support different video standards, so the driver may implicitly switch the current -standard. It is good practice to select an output before querying or -negotiating any other parameters.</para> +standard. +standard. Because of these possible side effects applications +must select an output before querying or negotiating any other parameters.</para> <para>Information about video outputs is available using the &VIDIOC-ENUMOUTPUT; ioctl.</para> diff --git a/Documentation/acpi/apei/einj.txt b/Documentation/acpi/apei/einj.txt index 5cc699ba5453..e7cc36397217 100644 --- a/Documentation/acpi/apei/einj.txt +++ b/Documentation/acpi/apei/einj.txt @@ -47,20 +47,53 @@ directory apei/einj. The following files are provided. - param1 This file is used to set the first error parameter value. Effect of - parameter depends on error_type specified. For memory error, this is - physical memory address. Only available if param_extension module - parameter is specified. + parameter depends on error_type specified. - param2 This file is used to set the second error parameter value. Effect of - parameter depends on error_type specified. For memory error, this is - physical memory address mask. Only available if param_extension - module parameter is specified. + parameter depends on error_type specified. + +BIOS versions based in the ACPI 4.0 specification have limited options +to control where the errors are injected. Your BIOS may support an +extension (enabled with the param_extension=1 module parameter, or +boot command line einj.param_extension=1). This allows the address +and mask for memory injections to be specified by the param1 and +param2 files in apei/einj. + +BIOS versions using the ACPI 5.0 specification have more control over +the target of the injection. For processor related errors (type 0x1, +0x2 and 0x4) the APICID of the target should be provided using the +param1 file in apei/einj. For memory errors (type 0x8, 0x10 and 0x20) +the address is set using param1 with a mask in param2 (0x0 is equivalent +to all ones). For PCI express errors (type 0x40, 0x80 and 0x100) the +segment, bus, device and function are specified using param1: + + 31 24 23 16 15 11 10 8 7 0 + +-------------------------------------------------+ + | segment | bus | device | function | reserved | + +-------------------------------------------------+ + +An ACPI 5.0 BIOS may also allow vendor specific errors to be injected. +In this case a file named vendor will contain identifying information +from the BIOS that hopefully will allow an application wishing to use +the vendor specific extension to tell that they are running on a BIOS +that supports it. All vendor extensions have the 0x80000000 bit set in +error_type. A file vendor_flags controls the interpretation of param1 +and param2 (1 = PROCESSOR, 2 = MEMORY, 4 = PCI). See your BIOS vendor +documentation for details (and expect changes to this API if vendors +creativity in using this feature expands beyond our expectations). + +Example: +# cd /sys/kernel/debug/apei/einj +# cat available_error_type # See which errors can be injected +0x00000002 Processor Uncorrectable non-fatal +0x00000008 Memory Correctable +0x00000010 Memory Uncorrectable non-fatal +# echo 0x12345000 > param1 # Set memory address for injection +# echo 0xfffffffffffff000 > param2 # Mask - anywhere in this page +# echo 0x8 > error_type # Choose correctable memory error +# echo 1 > error_inject # Inject now -Injecting parameter support is a BIOS version specific extension, that -is, it only works on some BIOS version. If you want to use it, please -make sure your BIOS version has the proper support and specify -"param_extension=y" in module parameter. For more information about EINJ, please refer to ACPI specification -version 4.0, section 17.5. +version 4.0, section 17.5 and ACPI 5.0, section 18.6. diff --git a/Documentation/devices.txt b/Documentation/devices.txt index cec8864ce4e8..00383186d8fb 100644 --- a/Documentation/devices.txt +++ b/Documentation/devices.txt @@ -447,6 +447,9 @@ Your cooperation is appreciated. 234 = /dev/btrfs-control Btrfs control device 235 = /dev/autofs Autofs control device 236 = /dev/mapper/control Device-Mapper control device + 237 = /dev/loop-control Loopback control device + 238 = /dev/vhost-net Host kernel accelerator for virtio net + 240-254 Reserved for local use 255 Reserved for MISC_DYNAMIC_MINOR diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt new file mode 100644 index 000000000000..3c046ee6e8b5 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt @@ -0,0 +1,14 @@ +* Atmel Direct Memory Access Controller (DMA) + +Required properties: +- compatible: Should be "atmel,<chip>-dma" +- reg: Should contain DMA registers location and length +- interrupts: Should contain DMA interrupt + +Examples: + +dma@ffffec00 { + compatible = "atmel,at91sam9g45-dma"; + reg = <0xffffec00 0x200>; + interrupts = <21>; +}; diff --git a/Documentation/devicetree/bindings/i2c/omap-i2c.txt b/Documentation/devicetree/bindings/i2c/omap-i2c.txt new file mode 100644 index 000000000000..56564aa4b444 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/omap-i2c.txt @@ -0,0 +1,30 @@ +I2C for OMAP platforms + +Required properties : +- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c" +- ti,hwmods : Must be "i2c<n>", n being the instance number (1-based) +- #address-cells = <1>; +- #size-cells = <0>; + +Recommended properties : +- clock-frequency : Desired I2C bus clock frequency in Hz. Otherwise + the default 100 kHz frequency will be used. + +Optional properties: +- Child nodes conforming to i2c bus binding + +Note: Current implementation will fetch base address, irq and dma +from omap hwmod data base during device registration. +Future plan is to migrate hwmod data base contents into device tree +blob so that, all the required data will be used from device tree dts +file. + +Examples : + +i2c1: i2c@0 { + compatible = "ti,omap3-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; + clock-frequency = <400000>; +}; diff --git a/Documentation/dmaengine.txt b/Documentation/dmaengine.txt index 94b7e0f96b38..bbe6cb3d1856 100644 --- a/Documentation/dmaengine.txt +++ b/Documentation/dmaengine.txt @@ -75,6 +75,10 @@ The slave DMA usage consists of following steps: slave_sg - DMA a list of scatter gather buffers from/to a peripheral dma_cyclic - Perform a cyclic DMA operation from/to a peripheral till the operation is explicitly stopped. + interleaved_dma - This is common to Slave as well as M2M clients. For slave + address of devices' fifo could be already known to the driver. + Various types of operations could be expressed by setting + appropriate values to the 'dma_interleaved_template' members. A non-NULL return of this transfer API represents a "descriptor" for the given transaction. @@ -89,6 +93,10 @@ The slave DMA usage consists of following steps: struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, size_t period_len, enum dma_data_direction direction); + struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)( + struct dma_chan *chan, struct dma_interleaved_template *xt, + unsigned long flags); + The peripheral driver is expected to have mapped the scatterlist for the DMA operation prior to calling device_prep_slave_sg, and must keep the scatterlist mapped until the DMA operation has completed. diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index d725c0dfe032..1bea46a54b1c 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -439,17 +439,6 @@ Who: Jean Delvare <khali@linux-fr.org> ---------------------------- -What: For VIDIOC_S_FREQUENCY the type field must match the device node's type. - If not, return -EINVAL. -When: 3.2 -Why: It makes no sense to switch the tuner to radio mode by calling - VIDIOC_S_FREQUENCY on a video node, or to switch the tuner to tv mode by - calling VIDIOC_S_FREQUENCY on a radio node. This is the first step of a - move to more consistent handling of tv and radio tuners. -Who: Hans Verkuil <hans.verkuil@cisco.com> - ----------------------------- - What: Opening a radio device node will no longer automatically switch the tuner mode from tv to radio. When: 3.3 diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 54078ed96b37..4840334ea97b 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -149,6 +149,7 @@ Code Seq#(hex) Include File Comments 'M' 01-03 drivers/scsi/megaraid/megaraid_sas.h 'M' 00-0F drivers/video/fsl-diu-fb.h conflict! 'N' 00-1F drivers/usb/scanner.h +'N' 40-7F drivers/block/nvme.c 'O' 00-06 mtd/ubi-user.h UBI 'P' all linux/soundcard.h conflict! 'P' 60-6F sound/sscape_ioctl.h conflict! diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index b29f3c416296..033d4e69b43b 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1059,6 +1059,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted. By default, super page will be supported if Intel IOMMU has the capability. With this option, super page will not be supported. + + intel_idle.max_cstate= [KNL,HW,ACPI,X86] + 0 disables intel_idle and fall back on acpi_idle. + 1 to 6 specify maximum depth of C-state. + intremap= [X86-64, Intel-IOMMU] on enable Interrupt Remapping (default) off disable Interrupt Remapping diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt index 40a4c65f380a..262acf56fa79 100644 --- a/Documentation/power/basic-pm-debugging.txt +++ b/Documentation/power/basic-pm-debugging.txt @@ -15,7 +15,7 @@ test at least a couple of times in a row for confidence. [This is necessary, because some problems only show up on a second attempt at suspending and resuming the system.] Moreover, hibernating in the "reboot" and "shutdown" modes causes the PM core to skip some platform-related callbacks which on ACPI -systems might be necessary to make hibernation work. Thus, if you machine fails +systems might be necessary to make hibernation work. Thus, if your machine fails to hibernate or resume in the "reboot" mode, you should try the "platform" mode: # echo platform > /sys/power/disk diff --git a/Documentation/power/freezing-of-tasks.txt b/Documentation/power/freezing-of-tasks.txt index 6ccb68f68da6..ebd7490ef1df 100644 --- a/Documentation/power/freezing-of-tasks.txt +++ b/Documentation/power/freezing-of-tasks.txt @@ -120,10 +120,10 @@ So in practice, the 'at all' may become a 'why freeze kernel threads?' and freezing user threads I don't find really objectionable." Still, there are kernel threads that may want to be freezable. For example, if -a kernel that belongs to a device driver accesses the device directly, it in -principle needs to know when the device is suspended, so that it doesn't try to -access it at that time. However, if the kernel thread is freezable, it will be -frozen before the driver's .suspend() callback is executed and it will be +a kernel thread that belongs to a device driver accesses the device directly, it +in principle needs to know when the device is suspended, so that it doesn't try +to access it at that time. However, if the kernel thread is freezable, it will +be frozen before the driver's .suspend() callback is executed and it will be thawed after the driver's .resume() callback has run, so it won't be accessing the device while it's suspended. diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas index 64adb98b181c..57566bacb4c5 100644 --- a/Documentation/scsi/ChangeLog.megaraid_sas +++ b/Documentation/scsi/ChangeLog.megaraid_sas @@ -1,3 +1,13 @@ +Release Date : Fri. Jan 6, 2012 17:00:00 PST 2010 - + (emaild-id:megaraidlinux@lsi.com) + Adam Radford +Current Version : 00.00.06.14-rc1 +Old Version : 00.00.06.12-rc1 + 1. Fix reglockFlags for degraded raid5/6 for MR 9360/9380. + 2. Mask off flags in ioctl path to prevent memory scribble with older + MegaCLI versions. + 3. Remove poll_mode_io module paramater, sysfs node, and associated code. +------------------------------------------------------------------------------- Release Date : Wed. Oct 5, 2011 17:00:00 PST 2010 - (emaild-id:megaraidlinux@lsi.com) Adam Radford diff --git a/Documentation/scsi/LICENSE.qla4xxx b/Documentation/scsi/LICENSE.qla4xxx index 494980e40491..ab899591ecb7 100644 --- a/Documentation/scsi/LICENSE.qla4xxx +++ b/Documentation/scsi/LICENSE.qla4xxx @@ -1,32 +1,11 @@ Copyright (c) 2003-2011 QLogic Corporation -QLogic Linux iSCSI HBA Driver +QLogic Linux iSCSI Driver This program includes a device driver for Linux 3.x. You may modify and redistribute the device driver code under the GNU General Public License (a copy of which is attached hereto as Exhibit A) published by the Free Software Foundation (version 2). -REGARDLESS OF WHAT LICENSING MECHANISM IS USED OR APPLICABLE, -THIS PROGRAM IS PROVIDED BY QLOGIC CORPORATION "AS IS'' AND ANY -EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A -PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR -BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED -TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. - -USER ACKNOWLEDGES AND AGREES THAT USE OF THIS PROGRAM WILL NOT -CREATE OR GIVE GROUNDS FOR A LICENSE BY IMPLICATION, ESTOPPEL, OR -OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT, -TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN -ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN -COMBINATION WITH THIS PROGRAM. - EXHIBIT A diff --git a/Documentation/target/tcm_mod_builder.py b/Documentation/target/tcm_mod_builder.py index 7ef9b843d529..6e21b8b52638 100755 --- a/Documentation/target/tcm_mod_builder.py +++ b/Documentation/target/tcm_mod_builder.py @@ -230,14 +230,9 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += "#include <linux/ctype.h>\n" buf += "#include <asm/unaligned.h>\n\n" buf += "#include <target/target_core_base.h>\n" - buf += "#include <target/target_core_transport.h>\n" - buf += "#include <target/target_core_fabric_ops.h>\n" + buf += "#include <target/target_core_fabric.h>\n" buf += "#include <target/target_core_fabric_configfs.h>\n" - buf += "#include <target/target_core_fabric_lib.h>\n" - buf += "#include <target/target_core_device.h>\n" - buf += "#include <target/target_core_tpg.h>\n" buf += "#include <target/target_core_configfs.h>\n" - buf += "#include <target/target_core_base.h>\n" buf += "#include <target/configfs_macros.h>\n\n" buf += "#include \"" + fabric_mod_name + "_base.h\"\n" buf += "#include \"" + fabric_mod_name + "_fabric.h\"\n\n" @@ -260,7 +255,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " /* " + fabric_mod_name + "_parse_wwn(name, &wwpn, 1) < 0)\n" buf += " return ERR_PTR(-EINVAL); */\n" buf += " se_nacl_new = " + fabric_mod_name + "_alloc_fabric_acl(se_tpg);\n" - buf += " if (!(se_nacl_new))\n" + buf += " if (!se_nacl_new)\n" buf += " return ERR_PTR(-ENOMEM);\n" buf += "//#warning FIXME: Hardcoded nexus depth in " + fabric_mod_name + "_make_nodeacl()\n" buf += " nexus_depth = 1;\n" @@ -308,7 +303,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " if (strict_strtoul(name + 5, 10, &tpgt) || tpgt > UINT_MAX)\n" buf += " return ERR_PTR(-EINVAL);\n\n" buf += " tpg = kzalloc(sizeof(struct " + fabric_mod_name + "_tpg), GFP_KERNEL);\n" - buf += " if (!(tpg)) {\n" + buf += " if (!tpg) {\n" buf += " printk(KERN_ERR \"Unable to allocate struct " + fabric_mod_name + "_tpg\");\n" buf += " return ERR_PTR(-ENOMEM);\n" buf += " }\n" @@ -344,7 +339,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " /* if (" + fabric_mod_name + "_parse_wwn(name, &wwpn, 1) < 0)\n" buf += " return ERR_PTR(-EINVAL); */\n\n" buf += " " + fabric_mod_port + " = kzalloc(sizeof(struct " + fabric_mod_name + "_" + fabric_mod_port + "), GFP_KERNEL);\n" - buf += " if (!(" + fabric_mod_port + ")) {\n" + buf += " if (!" + fabric_mod_port + ") {\n" buf += " printk(KERN_ERR \"Unable to allocate struct " + fabric_mod_name + "_" + fabric_mod_port + "\");\n" buf += " return ERR_PTR(-ENOMEM);\n" buf += " }\n" @@ -352,7 +347,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): if proto_ident == "FC" or proto_ident == "SAS": buf += " " + fabric_mod_port + "->" + fabric_mod_port + "_wwpn = wwpn;\n" - buf += " /* " + fabric_mod_name + "_format_wwn(&" + fabric_mod_port + "->" + fabric_mod_port + "_name[0], " + fabric_mod_name.upper() + "__NAMELEN, wwpn); */\n\n" + buf += " /* " + fabric_mod_name + "_format_wwn(&" + fabric_mod_port + "->" + fabric_mod_port + "_name[0], " + fabric_mod_name.upper() + "_NAMELEN, wwpn); */\n\n" buf += " return &" + fabric_mod_port + "->" + fabric_mod_port + "_wwn;\n" buf += "}\n\n" buf += "static void " + fabric_mod_name + "_drop_" + fabric_mod_port + "(struct se_wwn *wwn)\n" @@ -391,8 +386,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " .tpg_alloc_fabric_acl = " + fabric_mod_name + "_alloc_fabric_acl,\n" buf += " .tpg_release_fabric_acl = " + fabric_mod_name + "_release_fabric_acl,\n" buf += " .tpg_get_inst_index = " + fabric_mod_name + "_tpg_get_inst_index,\n" - buf += " .release_cmd_to_pool = " + fabric_mod_name + "_release_cmd,\n" - buf += " .release_cmd_direct = " + fabric_mod_name + "_release_cmd,\n" + buf += " .release_cmd = " + fabric_mod_name + "_release_cmd,\n" buf += " .shutdown_session = " + fabric_mod_name + "_shutdown_session,\n" buf += " .close_session = " + fabric_mod_name + "_close_session,\n" buf += " .stop_session = " + fabric_mod_name + "_stop_session,\n" @@ -405,14 +399,12 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " .set_default_node_attributes = " + fabric_mod_name + "_set_default_node_attrs,\n" buf += " .get_task_tag = " + fabric_mod_name + "_get_task_tag,\n" buf += " .get_cmd_state = " + fabric_mod_name + "_get_cmd_state,\n" - buf += " .new_cmd_failure = " + fabric_mod_name + "_new_cmd_failure,\n" buf += " .queue_data_in = " + fabric_mod_name + "_queue_data_in,\n" buf += " .queue_status = " + fabric_mod_name + "_queue_status,\n" buf += " .queue_tm_rsp = " + fabric_mod_name + "_queue_tm_rsp,\n" buf += " .get_fabric_sense_len = " + fabric_mod_name + "_get_fabric_sense_len,\n" buf += " .set_fabric_sense_len = " + fabric_mod_name + "_set_fabric_sense_len,\n" buf += " .is_state_remove = " + fabric_mod_name + "_is_state_remove,\n" - buf += " .pack_lun = " + fabric_mod_name + "_pack_lun,\n" buf += " /*\n" buf += " * Setup function pointers for generic logic in target_core_fabric_configfs.c\n" buf += " */\n" @@ -439,9 +431,9 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " * Register the top level struct config_item_type with TCM core\n" buf += " */\n" buf += " fabric = target_fabric_configfs_init(THIS_MODULE, \"" + fabric_mod_name[4:] + "\");\n" - buf += " if (!(fabric)) {\n" + buf += " if (IS_ERR(fabric)) {\n" buf += " printk(KERN_ERR \"target_fabric_configfs_init() failed\\n\");\n" - buf += " return -ENOMEM;\n" + buf += " return PTR_ERR(fabric);\n" buf += " }\n" buf += " /*\n" buf += " * Setup fabric->tf_ops from our local " + fabric_mod_name + "_ops\n" @@ -475,9 +467,9 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " printk(KERN_INFO \"" + fabric_mod_name.upper() + "[0] - Set fabric -> " + fabric_mod_name + "_fabric_configfs\\n\");\n" buf += " return 0;\n" buf += "};\n\n" - buf += "static void " + fabric_mod_name + "_deregister_configfs(void)\n" + buf += "static void __exit " + fabric_mod_name + "_deregister_configfs(void)\n" buf += "{\n" - buf += " if (!(" + fabric_mod_name + "_fabric_configfs))\n" + buf += " if (!" + fabric_mod_name + "_fabric_configfs)\n" buf += " return;\n\n" buf += " target_fabric_configfs_deregister(" + fabric_mod_name + "_fabric_configfs);\n" buf += " " + fabric_mod_name + "_fabric_configfs = NULL;\n" @@ -492,17 +484,15 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " return ret;\n\n" buf += " return 0;\n" buf += "};\n\n" - buf += "static void " + fabric_mod_name + "_exit(void)\n" + buf += "static void __exit " + fabric_mod_name + "_exit(void)\n" buf += "{\n" buf += " " + fabric_mod_name + "_deregister_configfs();\n" buf += "};\n\n" - buf += "#ifdef MODULE\n" buf += "MODULE_DESCRIPTION(\"" + fabric_mod_name.upper() + " series fabric driver\");\n" buf += "MODULE_LICENSE(\"GPL\");\n" buf += "module_init(" + fabric_mod_name + "_init);\n" buf += "module_exit(" + fabric_mod_name + "_exit);\n" - buf += "#endif\n" ret = p.write(buf) if ret: @@ -514,7 +504,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): def tcm_mod_scan_fabric_ops(tcm_dir): - fabric_ops_api = tcm_dir + "include/target/target_core_fabric_ops.h" + fabric_ops_api = tcm_dir + "include/target/target_core_fabric.h" print "Using tcm_mod_scan_fabric_ops: " + fabric_ops_api process_fo = 0; @@ -579,11 +569,7 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += "#include <scsi/scsi_cmnd.h>\n" buf += "#include <scsi/libfc.h>\n\n" buf += "#include <target/target_core_base.h>\n" - buf += "#include <target/target_core_transport.h>\n" - buf += "#include <target/target_core_fabric_ops.h>\n" - buf += "#include <target/target_core_fabric_lib.h>\n" - buf += "#include <target/target_core_device.h>\n" - buf += "#include <target/target_core_tpg.h>\n" + buf += "#include <target/target_core_fabric.h>\n" buf += "#include <target/target_core_configfs.h>\n\n" buf += "#include \"" + fabric_mod_name + "_base.h\"\n" buf += "#include \"" + fabric_mod_name + "_fabric.h\"\n\n" @@ -788,7 +774,7 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += "{\n" buf += " struct " + fabric_mod_name + "_nacl *nacl;\n\n" buf += " nacl = kzalloc(sizeof(struct " + fabric_mod_name + "_nacl), GFP_KERNEL);\n" - buf += " if (!(nacl)) {\n" + buf += " if (!nacl) {\n" buf += " printk(KERN_ERR \"Unable to alocate struct " + fabric_mod_name + "_nacl\\n\");\n" buf += " return NULL;\n" buf += " }\n\n" @@ -815,7 +801,7 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += "}\n\n" bufi += "u32 " + fabric_mod_name + "_tpg_get_inst_index(struct se_portal_group *);\n" - if re.search('release_cmd_to_pool', fo): + if re.search('\*release_cmd\)\(', fo): buf += "void " + fabric_mod_name + "_release_cmd(struct se_cmd *se_cmd)\n" buf += "{\n" buf += " return;\n" @@ -899,13 +885,6 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += "}\n\n" bufi += "int " + fabric_mod_name + "_get_cmd_state(struct se_cmd *);\n" - if re.search('new_cmd_failure\)\(', fo): - buf += "void " + fabric_mod_name + "_new_cmd_failure(struct se_cmd *se_cmd)\n" - buf += "{\n" - buf += " return;\n" - buf += "}\n\n" - bufi += "void " + fabric_mod_name + "_new_cmd_failure(struct se_cmd *);\n" - if re.search('queue_data_in\)\(', fo): buf += "int " + fabric_mod_name + "_queue_data_in(struct se_cmd *se_cmd)\n" buf += "{\n" @@ -948,15 +927,6 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += "}\n\n" bufi += "int " + fabric_mod_name + "_is_state_remove(struct se_cmd *);\n" - if re.search('pack_lun\)\(', fo): - buf += "u64 " + fabric_mod_name + "_pack_lun(unsigned int lun)\n" - buf += "{\n" - buf += " WARN_ON(lun >= 256);\n" - buf += " /* Caller wants this byte-swapped */\n" - buf += " return cpu_to_le64((lun & 0xff) << 8);\n" - buf += "}\n\n" - bufi += "u64 " + fabric_mod_name + "_pack_lun(unsigned int);\n" - ret = p.write(buf) if ret: diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index b61e46f449aa..1733ab947a95 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -284,7 +284,7 @@ method, the sys I/F structure will be built like this: The framework includes a simple notification mechanism, in the form of a netlink event. Netlink socket initialization is done during the _init_ of the framework. Drivers which intend to use the notification mechanism -just need to call generate_netlink_event() with two arguments viz +just need to call thermal_generate_netlink_event() with two arguments viz (originator, event). Typically the originator will be an integer assigned to a thermal_zone_device when it registers itself with the framework. The event will be one of:{THERMAL_AUX0, THERMAL_AUX1, THERMAL_CRITICAL, diff --git a/Documentation/video4linux/v4l2-controls.txt b/Documentation/video4linux/v4l2-controls.txt index 26aa0573933e..e2492a9d1027 100644 --- a/Documentation/video4linux/v4l2-controls.txt +++ b/Documentation/video4linux/v4l2-controls.txt @@ -666,27 +666,6 @@ a control of this type whenever the first control belonging to a new control class is added. -Differences from the Spec -========================= - -There are a few places where the framework acts slightly differently from the -V4L2 Specification. Those differences are described in this section. We will -have to see whether we need to adjust the spec or not. - -1) It is no longer required to have all controls contained in a -v4l2_ext_control array be from the same control class. The framework will be -able to handle any type of control in the array. You need to set ctrl_class -to 0 in order to enable this. If ctrl_class is non-zero, then it will still -check that all controls belong to that control class. - -If you set ctrl_class to 0 and count to 0, then it will only return an error -if there are no controls at all. - -2) Clarified the way error_idx works. For get and set it will be equal to -count if nothing was done yet. If it is less than count then only the controls -up to error_idx-1 were successfully applied. - - Proposals for Extensions ======================== |