diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/accounting/cgroupstats.txt | 4 | ||||
| -rw-r--r-- | Documentation/cgroups/blkio-controller.txt | 29 | ||||
| -rw-r--r-- | Documentation/cgroups/cgroups.txt | 58 | ||||
| -rw-r--r-- | Documentation/cgroups/cpuacct.txt | 21 | ||||
| -rw-r--r-- | Documentation/cgroups/cpusets.txt | 28 | ||||
| -rw-r--r-- | Documentation/cgroups/devices.txt | 6 | ||||
| -rw-r--r-- | Documentation/cgroups/freezer-subsystem.txt | 20 | ||||
| -rw-r--r-- | Documentation/cgroups/memory.txt | 17 | ||||
| -rw-r--r-- | Documentation/scheduler/sched-design-CFS.txt | 7 | ||||
| -rw-r--r-- | Documentation/scheduler/sched-rt-group.txt | 7 | ||||
| -rw-r--r-- | Documentation/vm/hwpoison.txt | 6 |
11 files changed, 109 insertions, 94 deletions
diff --git a/Documentation/accounting/cgroupstats.txt b/Documentation/accounting/cgroupstats.txt index eda40fd39cad..d16a9849e60e 100644 --- a/Documentation/accounting/cgroupstats.txt +++ b/Documentation/accounting/cgroupstats.txt @@ -21,7 +21,7 @@ information will not be available. To extract cgroup statistics a utility very similar to getdelays.c has been developed, the sample output of the utility is shown below -~/balbir/cgroupstats # ./getdelays -C "/cgroup/a" +~/balbir/cgroupstats # ./getdelays -C "/sys/fs/cgroup/a" sleeping 1, blocked 0, running 1, stopped 0, uninterruptible 0 -~/balbir/cgroupstats # ./getdelays -C "/cgroup" +~/balbir/cgroupstats # ./getdelays -C "/sys/fs/cgroup" sleeping 155, blocked 0, running 1, stopped 0, uninterruptible 2 diff --git a/Documentation/cgroups/blkio-controller.txt b/Documentation/cgroups/blkio-controller.txt index 465351d4cf85..b1b1bfadc9c0 100644 --- a/Documentation/cgroups/blkio-controller.txt +++ b/Documentation/cgroups/blkio-controller.txt @@ -28,16 +28,19 @@ cgroups. Here is what you can do. - Enable group scheduling in CFQ CONFIG_CFQ_GROUP_IOSCHED=y -- Compile and boot into kernel and mount IO controller (blkio). +- Compile and boot into kernel and mount IO controller (blkio); see + cgroups.txt, Why are cgroups needed?. - mount -t cgroup -o blkio none /cgroup + mount -t tmpfs cgroup_root /sys/fs/cgroup + mkdir /sys/fs/cgroup/blkio + mount -t cgroup -o blkio none /sys/fs/cgroup/blkio - Create two cgroups - mkdir -p /cgroup/test1/ /cgroup/test2 + mkdir -p /sys/fs/cgroup/blkio/test1/ /sys/fs/cgroup/blkio/test2 - Set weights of group test1 and test2 - echo 1000 > /cgroup/test1/blkio.weight - echo 500 > /cgroup/test2/blkio.weight + echo 1000 > /sys/fs/cgroup/blkio/test1/blkio.weight + echo 500 > /sys/fs/cgroup/blkio/test2/blkio.weight - Create two same size files (say 512MB each) on same disk (file1, file2) and launch two dd threads in different cgroup to read those files. @@ -46,12 +49,12 @@ cgroups. Here is what you can do. echo 3 > /proc/sys/vm/drop_caches dd if=/mnt/sdb/zerofile1 of=/dev/null & - echo $! > /cgroup/test1/tasks - cat /cgroup/test1/tasks + echo $! > /sys/fs/cgroup/blkio/test1/tasks + cat /sys/fs/cgroup/blkio/test1/tasks dd if=/mnt/sdb/zerofile2 of=/dev/null & - echo $! > /cgroup/test2/tasks - cat /cgroup/test2/tasks + echo $! > /sys/fs/cgroup/blkio/test2/tasks + cat /sys/fs/cgroup/blkio/test2/tasks - At macro level, first dd should finish first. To get more precise data, keep on looking at (with the help of script), at blkio.disk_time and @@ -68,13 +71,13 @@ Throttling/Upper Limit policy - Enable throttling in block layer CONFIG_BLK_DEV_THROTTLING=y -- Mount blkio controller - mount -t cgroup -o blkio none /cgroup/blkio +- Mount blkio controller (see cgroups.txt, Why are cgroups needed?) + mount -t cgroup -o blkio none /sys/fs/cgroup/blkio - Specify a bandwidth rate on particular device for root group. The format for policy is "<major>:<minor> <byes_per_second>". - echo "8:16 1048576" > /cgroup/blkio/blkio.read_bps_device + echo "8:16 1048576" > /sys/fs/cgroup/blkio/blkio.read_bps_device Above will put a limit of 1MB/second on reads happening for root group on device having major/minor number 8:16. @@ -149,7 +152,7 @@ Proportional weight policy files Following is the format. - #echo dev_maj:dev_minor weight > /path/to/cgroup/blkio.weight_device + # echo dev_maj:dev_minor weight > blkio.weight_device Configure weight=300 on /dev/sdb (8:16) in this cgroup # echo 8:16 300 > blkio.weight_device # cat blkio.weight_device diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt index 0ed99f08f1f3..15bca101ff62 100644 --- a/Documentation/cgroups/cgroups.txt +++ b/Documentation/cgroups/cgroups.txt @@ -138,7 +138,7 @@ With the ability to classify tasks differently for different resources the admin can easily set up a script which receives exec notifications and depending on who is launching the browser he can - # echo browser_pid > /mnt/<restype>/<userclass>/tasks + # echo browser_pid > /sys/fs/cgroup/<restype>/<userclass>/tasks With only a single hierarchy, he now would potentially have to create a separate cgroup for every browser launched and associate it with @@ -153,9 +153,9 @@ apps enhanced CPU power, With ability to write pids directly to resource classes, it's just a matter of : - # echo pid > /mnt/network/<new_class>/tasks + # echo pid > /sys/fs/cgroup/network/<new_class>/tasks (after some time) - # echo pid > /mnt/network/<orig_class>/tasks + # echo pid > /sys/fs/cgroup/network/<orig_class>/tasks Without this ability, he would have to split the cgroup into multiple separate ones and then associate the new cgroups with the @@ -310,21 +310,24 @@ subsystem, this is the case for the cpuset. To start a new job that is to be contained within a cgroup, using the "cpuset" cgroup subsystem, the steps are something like: - 1) mkdir /dev/cgroup - 2) mount -t cgroup -ocpuset cpuset /dev/cgroup - 3) Create the new cgroup by doing mkdir's and write's (or echo's) in - the /dev/cgroup virtual file system. - 4) Start a task that will be the "founding father" of the new job. - 5) Attach that task to the new cgroup by writing its pid to the - /dev/cgroup tasks file for that cgroup. - 6) fork, exec or clone the job tasks from this founding father task. + 1) mount -t tmpfs cgroup_root /sys/fs/cgroup + 2) mkdir /sys/fs/cgroup/cpuset + 3) mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset + 4) Create the new cgroup by doing mkdir's and write's (or echo's) in + the /sys/fs/cgroup virtual file system. + 5) Start a task that will be the "founding father" of the new job. + 6) Attach that task to the new cgroup by writing its pid to the + /sys/fs/cgroup/cpuset/tasks file for that cgroup. + 7) fork, exec or clone the job tasks from this founding father task. For example, the following sequence of commands will setup a cgroup named "Charlie", containing just CPUs 2 and 3, and Memory Node 1, and then start a subshell 'sh' in that cgroup: - mount -t cgroup cpuset -ocpuset /dev/cgroup - cd /dev/cgroup + mount -t tmpfs cgroup_root /sys/fs/cgroup + mkdir /sys/fs/cgroup/cpuset + mount -t cgroup cpuset -ocpuset /sys/fs/cgroup/cpuset + cd /sys/fs/cgroup/cpuset mkdir Charlie cd Charlie /bin/echo 2-3 > cpuset.cpus @@ -345,7 +348,7 @@ Creating, modifying, using the cgroups can be done through the cgroup virtual filesystem. To mount a cgroup hierarchy with all available subsystems, type: -# mount -t cgroup xxx /dev/cgroup +# mount -t cgroup xxx /sys/fs/cgroup The "xxx" is not interpreted by the cgroup code, but will appear in /proc/mounts so may be any useful identifying string that you like. @@ -354,23 +357,32 @@ Note: Some subsystems do not work without some user input first. For instance, if cpusets are enabled the user will have to populate the cpus and mems files for each new cgroup created before that group can be used. +As explained in section `1.2 Why are cgroups needed?' you should create +different hierarchies of cgroups for each single resource or group of +resources you want to control. Therefore, you should mount a tmpfs on +/sys/fs/cgroup and create directories for each cgroup resource or resource +group. + +# mount -t tmpfs cgroup_root /sys/fs/cgroup +# mkdir /sys/fs/cgroup/rg1 + To mount a cgroup hierarchy with just the cpuset and memory subsystems, type: -# mount -t cgroup -o cpuset,memory hier1 /dev/cgroup +# mount -t cgroup -o cpuset,memory hier1 /sys/fs/cgroup/rg1 To change the set of subsystems bound to a mounted hierarchy, just remount with different options: -# mount -o remount,cpuset,blkio hier1 /dev/cgroup +# mount -o remount,cpuset,blkio hier1 /sys/fs/cgroup/rg1 Now memory is removed from the hierarchy and blkio is added. Note this will add blkio to the hierarchy but won't remove memory or cpuset, because the new options are appended to the old ones: -# mount -o remount,blkio /dev/cgroup +# mount -o remount,blkio /sys/fs/cgroup/rg1 To Specify a hierarchy's release_agent: # mount -t cgroup -o cpuset,release_agent="/sbin/cpuset_release_agent" \ - xxx /dev/cgroup + xxx /sys/fs/cgroup/rg1 Note that specifying 'release_agent' more than once will return failure. @@ -379,17 +391,17 @@ when the hierarchy consists of a single (root) cgroup. Supporting the ability to arbitrarily bind/unbind subsystems from an existing cgroup hierarchy is intended to be implemented in the future. -Then under /dev/cgroup you can find a tree that corresponds to the -tree of the cgroups in the system. For instance, /dev/cgroup +Then under /sys/fs/cgroup/rg1 you can find a tree that corresponds to the +tree of the cgroups in the system. For instance, /sys/fs/cgroup/rg1 is the cgroup that holds the whole system. If you want to change the value of release_agent: -# echo "/sbin/new_release_agent" > /dev/cgroup/release_agent +# echo "/sbin/new_release_agent" > /sys/fs/cgroup/rg1/release_agent It can also be changed via remount. -If you want to create a new cgroup under /dev/cgroup: -# cd /dev/cgroup +If you want to create a new cgroup under /sys/fs/cgroup/rg1: +# cd /sys/fs/cgroup/rg1 # mkdir my_cgroup Now you want to do something with this cgroup. diff --git a/Documentation/cgroups/cpuacct.txt b/Documentation/cgroups/cpuacct.txt index 8b930946c52a..9ad85df4b983 100644 --- a/Documentation/cgroups/cpuacct.txt +++ b/Documentation/cgroups/cpuacct.txt @@ -10,26 +10,25 @@ directly present in its group. Accounting groups can be created by first mounting the cgroup filesystem. -# mkdir /cgroups -# mount -t cgroup -ocpuacct none /cgroups - -With the above step, the initial or the parent accounting group -becomes visible at /cgroups. At bootup, this group includes all the -tasks in the system. /cgroups/tasks lists the tasks in this cgroup. -/cgroups/cpuacct.usage gives the CPU time (in nanoseconds) obtained by -this group which is essentially the CPU time obtained by all the tasks +# mount -t cgroup -ocpuacct none /sys/fs/cgroup + +With the above step, the initial or the parent accounting group becomes +visible at /sys/fs/cgroup. At bootup, this group includes all the tasks in +the system. /sys/fs/cgroup/tasks lists the tasks in this cgroup. +/sys/fs/cgroup/cpuacct.usage gives the CPU time (in nanoseconds) obtained +by this group which is essentially the CPU time obtained by all the tasks in the system. -New accounting groups can be created under the parent group /cgroups. +New accounting groups can be created under the parent group /sys/fs/cgroup. -# cd /cgroups +# cd /sys/fs/cgroup # mkdir g1 # echo $$ > g1 The above steps create a new group g1 and move the current shell process (bash) into it. CPU time consumed by this bash and its children can be obtained from g1/cpuacct.usage and the same is accumulated in -/cgroups/cpuacct.usage also. +/sys/fs/cgroup/cpuacct.usage also. cpuacct.stat file lists a few statistics which further divide the CPU time obtained by the cgroup into user and system times. Currently diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt index 98a30829af7a..5b0d78e55ccc 100644 --- a/Documentation/cgroups/cpusets.txt +++ b/Documentation/cgroups/cpusets.txt @@ -661,21 +661,21 @@ than stress the kernel. To start a new job that is to be contained within a cpuset, the steps are: - 1) mkdir /dev/cpuset - 2) mount -t cgroup -ocpuset cpuset /dev/cpuset + 1) mkdir /sys/fs/cgroup/cpuset + 2) mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset 3) Create the new cpuset by doing mkdir's and write's (or echo's) in - the /dev/cpuset virtual file system. + the /sys/fs/cgroup/cpuset virtual file system. 4) Start a task that will be the "founding father" of the new job. 5) Attach that task to the new cpuset by writing its pid to the - /dev/cpuset tasks file for that cpuset. + /sys/fs/cgroup/cpuset tasks file for that cpuset. 6) fork, exec or clone the job tasks from this founding father task. For example, the following sequence of commands will setup a cpuset named "Charlie", containing just CPUs 2 and 3, and Memory Node 1, and then start a subshell 'sh' in that cpuset: - mount -t cgroup -ocpuset cpuset /dev/cpuset - cd /dev/cpuset + mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset + cd /sys/fs/cgroup/cpuset mkdir Charlie cd Charlie /bin/echo 2-3 > cpuset.cpus @@ -710,14 +710,14 @@ Creating, modifying, using the cpusets can be done through the cpuset virtual filesystem. To mount it, type: -# mount -t cgroup -o cpuset cpuset /dev/cpuset +# mount -t cgroup -o cpuset cpuset /sys/fs/cgroup/cpuset -Then under /dev/cpuset you can find a tree that corresponds to the -tree of the cpusets in the system. For instance, /dev/cpuset +Then under /sys/fs/cgroup/cpuset you can find a tree that corresponds to the +tree of the cpusets in the system. For instance, /sys/fs/cgroup/cpuset is the cpuset that holds the whole system. -If you want to create a new cpuset under /dev/cpuset: -# cd /dev/cpuset +If you want to create a new cpuset under /sys/fs/cgroup/cpuset: +# cd /sys/fs/cgroup/cpuset # mkdir my_cpuset Now you want to do something with this cpuset. @@ -765,12 +765,12 @@ wrapper around the cgroup filesystem. The command -mount -t cpuset X /dev/cpuset +mount -t cpuset X /sys/fs/cgroup/cpuset is equivalent to -mount -t cgroup -ocpuset,noprefix X /dev/cpuset -echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent +mount -t cgroup -ocpuset,noprefix X /sys/fs/cgroup/cpuset +echo "/sbin/cpuset_release_agent" > /sys/fs/cgroup/cpuset/release_agent 2.2 Adding/removing cpus ------------------------ diff --git a/Documentation/cgroups/devices.txt b/Documentation/cgroups/devices.txt index 57ca4c89fe5c..16624a7f8222 100644 --- a/Documentation/cgroups/devices.txt +++ b/Documentation/cgroups/devices.txt @@ -22,16 +22,16 @@ removed from the child(ren). An entry is added using devices.allow, and removed using devices.deny. For instance - echo 'c 1:3 mr' > /cgroups/1/devices.allow + echo 'c 1:3 mr' > /sys/fs/cgroup/1/devices.allow allows cgroup 1 to read and mknod the device usually known as /dev/null. Doing - echo a > /cgroups/1/devices.deny + echo a > /sys/fs/cgroup/1/devices.deny will remove the default 'a *:* rwm' entry. Doing - echo a > /cgroups/1/devices.allow + echo a > /sys/fs/cgroup/1/devices.allow will add the 'a *:* rwm' entry to the whitelist. diff --git a/Documentation/cgroups/freezer-subsystem.txt b/Documentation/cgroups/freezer-subsystem.txt index 41f37fea1276..c21d77742a07 100644 --- a/Documentation/cgroups/freezer-subsystem.txt +++ b/Documentation/cgroups/freezer-subsystem.txt @@ -59,28 +59,28 @@ is non-freezable. * Examples of usage : - # mkdir /containers - # mount -t cgroup -ofreezer freezer /containers - # mkdir /containers/0 - # echo $some_pid > /containers/0/tasks + # mkdir /sys/fs/cgroup/freezer + # mount -t cgroup -ofreezer freezer /sys/fs/cgroup/freezer + # mkdir /sys/fs/cgroup/freezer/0 + # echo $some_pid > /sys/fs/cgroup/freezer/0/tasks to get status of the freezer subsystem : - # cat /containers/0/freezer.state + # cat /sys/fs/cgroup/freezer/0/freezer.state THAWED to freeze all tasks in the container : - # echo FROZEN > /containers/0/freezer.state - # cat /containers/0/freezer.state + # echo FROZEN > /sys/fs/cgroup/freezer/0/freezer.state + # cat /sys/fs/cgroup/freezer/0/freezer.state FREEZING - # cat /containers/0/freezer.state + # cat /sys/fs/cgroup/freezer/0/freezer.state FROZEN to unfreeze all tasks in the container : - # echo THAWED > /containers/0/freezer.state - # cat /containers/0/freezer.state + # echo THAWED > /sys/fs/cgroup/freezer/0/freezer.state + # cat /sys/fs/cgroup/freezer/0/freezer.state THAWED This is the basic mechanism which should do the right thing for user space task diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index 510d64570d60..ffec2416aa74 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -264,16 +264,17 @@ b. Enable CONFIG_RESOURCE_COUNTERS c. Enable CONFIG_CGROUP_MEM_RES_CTLR d. Enable CONFIG_CGROUP_MEM_RES_CTLR_SWAP (to use swap extension) -1. Prepare the cgroups -# mkdir -p /cgroups -# mount -t cgroup none /cgroups -o memory +1. Prepare the cgroups (see cgroups.txt, Why are cgroups needed?) +# mount -t tmpfs none /sys/fs/cgroup +# mkdir /sys/fs/cgroup/memory +# mount -t cgroup none /sys/fs/cgroup/memory -o memory 2. Make the new group and move bash into it -# mkdir /cgroups/0 -# echo $$ > /cgroups/0/tasks +# mkdir /sys/fs/cgroup/memory/0 +# echo $$ > /sys/fs/cgroup/memory/0/tasks Since now we're in the 0 cgroup, we can alter the memory limit: -# echo 4M > /cgroups/0/memory.limit_in_bytes +# echo 4M > /sys/fs/cgroup/memory/0/memory.limit_in_bytes NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo, mega or gigabytes. (Here, Kilo, Mega, Giga are Kibibytes, Mebibytes, Gibibytes.) @@ -281,11 +282,11 @@ mega or gigabytes. (Here, Kilo, Mega, Giga are Kibibytes, Mebibytes, Gibibytes.) NOTE: We can write "-1" to reset the *.limit_in_bytes(unlimited). NOTE: We cannot set limits on the root cgroup any more. -# cat /cgroups/0/memory.limit_in_bytes +# cat /sys/fs/cgroup/memory/0/memory.limit_in_bytes 4194304 We can check the usage: -# cat /cgroups/0/memory.usage_in_bytes +# cat /sys/fs/cgroup/memory/0/memory.usage_in_bytes 1216512 A successful write to this file does not guarantee a successful set of diff --git a/Documentation/scheduler/sched-design-CFS.txt b/Documentation/scheduler/sched-design-CFS.txt index 99961993257a..91ecff07cede 100644 --- a/Documentation/scheduler/sched-design-CFS.txt +++ b/Documentation/scheduler/sched-design-CFS.txt @@ -223,9 +223,10 @@ When CONFIG_FAIR_GROUP_SCHED is defined, a "cpu.shares" file is created for each group created using the pseudo filesystem. See example steps below to create task groups and modify their CPU share using the "cgroups" pseudo filesystem. - # mkdir /dev/cpuctl - # mount -t cgroup -ocpu none /dev/cpuctl - # cd /dev/cpuctl + # mount -t tmpfs cgroup_root /sys/fs/cgroup + # mkdir /sys/fs/cgroup/cpu + # mount -t cgroup -ocpu none /sys/fs/cgroup/cpu + # cd /sys/fs/cgroup/cpu # mkdir multimedia # create "multimedia" group of tasks # mkdir browser # create "browser" group of tasks diff --git a/Documentation/scheduler/sched-rt-group.txt b/Documentation/scheduler/sched-rt-group.txt index 605b0d40329d..71b54d549987 100644 --- a/Documentation/scheduler/sched-rt-group.txt +++ b/Documentation/scheduler/sched-rt-group.txt @@ -129,9 +129,8 @@ priority! Enabling CONFIG_RT_GROUP_SCHED lets you explicitly allocate real CPU bandwidth to task groups. -This uses the /cgroup virtual file system and -"/cgroup/<cgroup>/cpu.rt_runtime_us" to control the CPU time reserved for each -control group. +This uses the cgroup virtual file system and "<cgroup>/cpu.rt_runtime_us" +to control the CPU time reserved for each control group. For more information on working with control groups, you should read Documentation/cgroups/cgroups.txt as well. @@ -150,7 +149,7 @@ For now, this can be simplified to just the following (but see Future plans): =============== There is work in progress to make the scheduling period for each group -("/cgroup/<cgroup>/cpu.rt_period_us") configurable as well. +("<cgroup>/cpu.rt_period_us") configurable as well. The constraint on the period is that a subgroup must have a smaller or equal period to its parent. But realistically its not very useful _yet_ diff --git a/Documentation/vm/hwpoison.txt b/Documentation/vm/hwpoison.txt index 12f9ba20ccb7..550068466605 100644 --- a/Documentation/vm/hwpoison.txt +++ b/Documentation/vm/hwpoison.txt @@ -129,12 +129,12 @@ Limit injection to pages owned by memgroup. Specified by inode number of the memcg. Example: - mkdir /cgroup/hwpoison + mkdir /sys/fs/cgroup/mem/hwpoison usemem -m 100 -s 1000 & - echo `jobs -p` > /cgroup/hwpoison/tasks + echo `jobs -p` > /sys/fs/cgroup/mem/hwpoison/tasks - memcg_ino=$(ls -id /cgroup/hwpoison | cut -f1 -d' ') + memcg_ino=$(ls -id /sys/fs/cgroup/mem/hwpoison | cut -f1 -d' ') echo $memcg_ino > /debug/hwpoison/corrupt-filter-memcg page-types -p `pidof init` --hwpoison # shall do nothing |