diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/acpi/enumeration.txt | 26 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/dsa/dsa.txt | 4 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/thermal/rcar-thermal.txt | 2 | ||||
| -rw-r--r-- | Documentation/input/alps.txt | 8 | ||||
| -rw-r--r-- | Documentation/input/event-codes.txt | 6 | ||||
| -rw-r--r-- | Documentation/input/multi-touch-protocol.txt | 9 | ||||
| -rw-r--r-- | Documentation/kernel-parameters.txt | 7 | ||||
| -rw-r--r-- | Documentation/power/basic-pm-debugging.txt | 10 |
8 files changed, 60 insertions, 12 deletions
diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt index 9b121a569ab4..750401f91341 100644 --- a/Documentation/acpi/enumeration.txt +++ b/Documentation/acpi/enumeration.txt @@ -254,8 +254,13 @@ GPIO support ~~~~~~~~~~~~ ACPI 5 introduced two new resources to describe GPIO connections: GpioIo and GpioInt. These resources are used be used to pass GPIO numbers used by -the device to the driver. For example: +the device to the driver. ACPI 5.1 extended this with _DSD (Device +Specific Data) which made it possible to name the GPIOs among other things. +For example: + +Device (DEV) +{ Method (_CRS, 0, NotSerialized) { Name (SBUF, ResourceTemplate() @@ -285,6 +290,18 @@ the device to the driver. For example: Return (SBUF) } + // ACPI 5.1 _DSD used for naming the GPIOs + Name (_DSD, Package () + { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () + { + Package () {"power-gpios", Package() {^DEV, 0, 0, 0 }}, + Package () {"irq-gpios", Package() {^DEV, 1, 0, 0 }}, + } + }) + ... + These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0" specifies the path to the controller. In order to use these GPIOs in Linux we need to translate them to the corresponding Linux GPIO descriptors. @@ -300,11 +317,11 @@ a code like this: struct gpio_desc *irq_desc, *power_desc; - irq_desc = gpiod_get_index(dev, NULL, 1); + irq_desc = gpiod_get(dev, "irq"); if (IS_ERR(irq_desc)) /* handle error */ - power_desc = gpiod_get_index(dev, NULL, 0); + power_desc = gpiod_get(dev, "power"); if (IS_ERR(power_desc)) /* handle error */ @@ -313,6 +330,9 @@ a code like this: There are also devm_* versions of these functions which release the descriptors once the device is released. +See Documentation/acpi/gpio-properties.txt for more information about the +_DSD binding related to GPIOs. + MFD devices ~~~~~~~~~~~ The MFD devices register their children as platform devices. For the child diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt index e124847443f8..f0b4cd72411d 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt @@ -19,7 +19,9 @@ the parent DSA node. The maximum number of allowed child nodes is 4 (DSA_MAX_SWITCHES). Each of these switch child nodes should have the following required properties: -- reg : Describes the switch address on the MII bus +- reg : Contains two fields. The first one describes the + address on the MII bus. The second is the switch + number that must be unique in cascaded configurations - #address-cells : Must be 1 - #size-cells : Must be 0 diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt index 43404b197933..332e625f6ed0 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt @@ -4,7 +4,7 @@ Required properties: - compatible : "renesas,thermal-<soctype>", "renesas,rcar-thermal" as fallback. Examples with soctypes are: - - "renesas,thermal-r8a73a4" (R-Mobile AP6) + - "renesas,thermal-r8a73a4" (R-Mobile APE6) - "renesas,thermal-r8a7779" (R-Car H1) - "renesas,thermal-r8a7790" (R-Car H2) - "renesas,thermal-r8a7791" (R-Car M2-W) diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt index a63e5e013a8c..92ae734c00c3 100644 --- a/Documentation/input/alps.txt +++ b/Documentation/input/alps.txt @@ -114,6 +114,9 @@ ALPS Absolute Mode - Protocol Version 2 byte 4: 0 y6 y5 y4 y3 y2 y1 y0 byte 5: 0 z6 z5 z4 z3 z2 z1 z0 +Protocol Version 2 DualPoint devices send standard PS/2 mouse packets for +the DualPoint Stick. + Dualpoint device -- interleaved packet format --------------------------------------------- @@ -127,6 +130,11 @@ Dualpoint device -- interleaved packet format byte 7: 0 y6 y5 y4 y3 y2 y1 y0 byte 8: 0 z6 z5 z4 z3 z2 z1 z0 +Devices which use the interleaving format normally send standard PS/2 mouse +packets for the DualPoint Stick + ALPS Absolute Mode packets for the +touchpad, switching to the interleaved packet format when both the stick and +the touchpad are used at the same time. + ALPS Absolute Mode - Protocol Version 3 --------------------------------------- diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt index c587a966413e..96705616f582 100644 --- a/Documentation/input/event-codes.txt +++ b/Documentation/input/event-codes.txt @@ -294,6 +294,12 @@ accordingly. This property does not affect kernel behavior. The kernel does not provide button emulation for such devices but treats them as any other INPUT_PROP_BUTTONPAD device. +INPUT_PROP_ACCELEROMETER +------------------------- +Directional axes on this device (absolute and/or relative x, y, z) represent +accelerometer data. All other axes retain their meaning. A device must not mix +regular directional axes and accelerometer axes on the same event node. + Guidelines: ========== The guidelines below ensure proper single-touch and multi-finger functionality. diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt index 7b4f59c09ee2..b85d000faeb4 100644 --- a/Documentation/input/multi-touch-protocol.txt +++ b/Documentation/input/multi-touch-protocol.txt @@ -312,9 +312,12 @@ ABS_MT_TOOL_TYPE The type of approaching tool. A lot of kernel drivers cannot distinguish between different tool types, such as a finger or a pen. In such cases, the -event should be omitted. The protocol currently supports MT_TOOL_FINGER and -MT_TOOL_PEN [2]. For type B devices, this event is handled by input core; -drivers should instead use input_mt_report_slot_state(). +event should be omitted. The protocol currently supports MT_TOOL_FINGER, +MT_TOOL_PEN, and MT_TOOL_PALM [2]. For type B devices, this event is handled +by input core; drivers should instead use input_mt_report_slot_state(). +A contact's ABS_MT_TOOL_TYPE may change over time while still touching the +device, because the firmware may not be able to determine which tool is being +used when it first appears. ABS_MT_BLOB_ID diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index bfcb1a62a7b4..8b1fa5e129ac 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -3462,6 +3462,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted. improve throughput, but will also increase the amount of memory reserved for use by the client. + suspend.pm_test_delay= + [SUSPEND] + Sets the number of seconds to remain in a suspend test + mode before resuming the system (see + /sys/power/pm_test). Only available when CONFIG_PM_DEBUG + is set. Default value is 5. + swapaccount=[0|1] [KNL] Enable accounting of swap in memory resource controller if no parameter or 1 is given or disable diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt index edeecd447d23..b96098ccfe69 100644 --- a/Documentation/power/basic-pm-debugging.txt +++ b/Documentation/power/basic-pm-debugging.txt @@ -75,12 +75,14 @@ you should do the following: # echo platform > /sys/power/disk # echo disk > /sys/power/state -Then, the kernel will try to freeze processes, suspend devices, wait 5 seconds, -resume devices and thaw processes. If "platform" is written to +Then, the kernel will try to freeze processes, suspend devices, wait a few +seconds (5 by default, but configurable by the suspend.pm_test_delay module +parameter), resume devices and thaw processes. If "platform" is written to /sys/power/pm_test , then after suspending devices the kernel will additionally invoke the global control methods (eg. ACPI global control methods) used to -prepare the platform firmware for hibernation. Next, it will wait 5 seconds and -invoke the platform (eg. ACPI) global methods used to cancel hibernation etc. +prepare the platform firmware for hibernation. Next, it will wait a +configurable number of seconds and invoke the platform (eg. ACPI) global +methods used to cancel hibernation etc. Writing "none" to /sys/power/pm_test causes the kernel to switch to the normal hibernation/suspend operations. Also, when open for reading, /sys/power/pm_test |