diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 82 |
1 files changed, 41 insertions, 41 deletions
@@ -71,7 +71,7 @@ endif # In both cases the working directory must be the root of the kernel src. # 1) O= # Use "make O=dir/to/store/output/files/" -# +# # 2) Set KBUILD_OUTPUT # Set the environment variable KBUILD_OUTPUT to point to the directory # where the output files shall be placed. @@ -185,13 +185,13 @@ CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ else if [ -x /bin/bash ]; then echo /bin/bash; \ else echo sh; fi ; fi) -HOSTCC = gcc -HOSTCXX = g++ -HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -HOSTCXXFLAGS = -O2 +HOSTCC = gcc +HOSTCXX = g++ +HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer +HOSTCXXFLAGS = -O2 -# Decide whether to build built-in, modular, or both. -# Normally, just do built-in. +# Decide whether to build built-in, modular, or both. +# Normally, just do built-in. KBUILD_MODULES := KBUILD_BUILTIN := 1 @@ -199,7 +199,7 @@ KBUILD_BUILTIN := 1 # If we have only "make modules", don't compile built-in objects. # When we're building modules with modversions, we need to consider # the built-in objects during the descend as well, in order to -# make sure the checksums are uptodate before we record them. +# make sure the checksums are up to date before we record them. ifeq ($(MAKECMDGOALS),modules) KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1) @@ -232,7 +232,7 @@ export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD # # If $(quiet) is empty, the whole command will be printed. # If it is set to "quiet_", only the short version will be printed. -# If it is set to "silent_", nothing wil be printed at all, since +# If it is set to "silent_", nothing will be printed at all, since # the variable $(silent_cmd_cc_o_c) doesn't exist. # # A simple variant is to prefix commands with $(Q) - that's useful @@ -268,7 +268,7 @@ MAKEFLAGS += --include-dir=$(srctree) include $(srctree)/scripts/Kbuild.include # Do not use make's built-in rules and variables -# This increases performance and avoid hard-to-debug behaviour +# This increases performance and avoid hard-to-debug behavour MAKEFLAGS += -rR # Make variables (CC, etc...) @@ -306,21 +306,21 @@ LINUXINCLUDE := -Iinclude \ CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE) -CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ - -fno-strict-aliasing -fno-common -AFLAGS := -D__ASSEMBLY__ +CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ + -fno-strict-aliasing -fno-common +AFLAGS := -D__ASSEMBLY__ # Read KERNELRELEASE from include/config/kernel.release (if it exists) KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null) KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) -export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION \ - ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \ - CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE \ - HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS +export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION +export ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC +export CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE +export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS export CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS -export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE +export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE # When compiling out-of-tree modules, put MODVERDIR in the module @@ -358,7 +358,7 @@ endif # catch them early, and hand them over to scripts/kconfig/Makefile # It is allowed to specify more targets when calling make, including # mixing *config targets and build targets. -# For example 'make oldconfig all'. +# For example 'make oldconfig all'. # Detect when mixed targets is specified, and make a second invocation # of make so .config is not included in this case either (for *config). @@ -417,7 +417,7 @@ else ifeq ($(KBUILD_EXTMOD),) # Additional helpers built in scripts/ # Carefully list dependencies so we do not try to build scripts twice -# in parrallel +# in parallel PHONY += scripts scripts: scripts_basic include/config/auto.conf $(Q)$(MAKE) $(build)=$(@) @@ -443,7 +443,7 @@ $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ; # If .config is newer than include/config/auto.conf, someone tinkered # with it and forgot to run make oldconfig. -# if auto.conf.cmd is missing then we are probarly in a cleaned tree so +# if auto.conf.cmd is missing then we are probably in a cleaned tree so # we execute the config step to be sure to catch updated Kconfig files include/config/auto.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd ifeq ($(KBUILD_EXTMOD),) @@ -460,7 +460,7 @@ endif # The all: target is the default when no target is given on the # command line. # This allow a user to issue only 'make' to build a kernel including modules -# Defaults vmlinux but it is usually overriden in the arch makefile +# Defaults vmlinux but it is usually overridden in the arch makefile all: vmlinux ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE @@ -492,11 +492,11 @@ CHECKFLAGS += $(NOSTDINC_FLAGS) # warn about C99 declaration after statement CFLAGS += $(call cc-option,-Wdeclaration-after-statement,) -# disable pointer signedness warnings in gcc 4.0 +# disable pointer signed / unsigned warnings in gcc 4.0 CFLAGS += $(call cc-option,-Wno-pointer-sign,) # Default kernel image to build when no specific target is given. -# KBUILD_IMAGE may be overruled on the commandline or +# KBUILD_IMAGE may be overruled on the command line or # set in the environment # Also any assignments in arch/$(ARCH)/Makefile take precedence over # this default value @@ -510,7 +510,7 @@ export INSTALL_PATH ?= /boot # # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory # relocations required by build roots. This is not defined in the -# makefile but the arguement can be passed to make if needed. +# makefile but the argument can be passed to make if needed. # MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) @@ -556,7 +556,7 @@ libs-y := $(libs-y1) $(libs-y2) # Build vmlinux # --------------------------------------------------------------------------- -# vmlinux is build from the objects selected by $(vmlinux-init) and +# vmlinux is built from the objects selected by $(vmlinux-init) and # $(vmlinux-main). Most are built-in.o files from top-level directories # in the kernel tree, others are specified in arch/$(ARCH)Makefile. # Ordering when linking is important, and $(vmlinux-init) must be first. @@ -607,7 +607,7 @@ quiet_cmd_vmlinux_version = GEN .version $(MAKE) $(build)=init # Generate System.map -quiet_cmd_sysmap = SYSMAP +quiet_cmd_sysmap = SYSMAP cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap # Link of vmlinux @@ -754,10 +754,10 @@ _localver = $(foreach f, $(__localver), $(if $(findstring ~, $(f)),,$(f))) localver = $(subst $(space),, \ $(shell cat /dev/null $(_localver)) \ $(patsubst "%",%,$(CONFIG_LOCALVERSION))) - + # If CONFIG_LOCALVERSION_AUTO is set scripts/setlocalversion is called # and if the SCM is know a tag from the SCM is appended. -# The appended tag is determinded by the SCM used. +# The appended tag is determined by the SCM used. # # Currently, only git is supported. # Other SCMs can edit scripts/setlocalversion and add the appropriate @@ -823,14 +823,14 @@ prepare0: archprepare FORCE # All the preparing.. prepare prepare-all: prepare0 -# Leave this as default for preprocessing vmlinux.lds.S, which is now -# done in arch/$(ARCH)/kernel/Makefile +# Leave this as default for preprocessing vmlinux.lds.S, which is now +# done in arch/$(ARCH)/kernel/Makefile export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH) -# FIXME: The asm symlink changes when $(ARCH) changes. That's -# hard to detect, but I suppose "make mrproper" is a good idea -# before switching between archs anyway. +# FIXME: The asm symlink changes when $(ARCH) changes. That's +# hard to detect, but I suppose "make mrproper" is a good idea +# before switching between archs anyway. include/asm: @echo ' SYMLINK $@ -> include/asm-$(ARCH)' @@ -870,7 +870,7 @@ depend dep: ifdef CONFIG_MODULES -# By default, build modules as well +# By default, build modules as well all: modules @@ -968,7 +968,7 @@ clean: archclean $(clean-dirs) $(call cmd,rmdirs) $(call cmd,rmfiles) @find . $(RCS_FIND_IGNORE) \ - \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ + \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ -o -name '*.symtypes' \) \ -type f -print | xargs rm -f @@ -993,9 +993,9 @@ PHONY += distclean distclean: mrproper @find $(srctree) $(RCS_FIND_IGNORE) \ - \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ + \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \ - -o -name '.*.rej' -o -size 0 \ + -o -name '.*.rej' -o -size 0 \ -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \ -type f -print | xargs rm -f @@ -1088,7 +1088,7 @@ else # KBUILD_EXTMOD # make M=dir modules Make all modules in specified dir # make M=dir Same as 'make M=dir modules' # make M=dir modules_install -# Install the modules build in the module directory +# Install the modules built in the module directory # Assumes install directory is already created # We are always building modules @@ -1147,7 +1147,7 @@ clean: rm-dirs := $(MODVERDIR) clean: $(clean-dirs) $(call cmd,rmdirs) @find $(KBUILD_EXTMOD) $(RCS_FIND_IGNORE) \ - \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ + \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \ -type f -print | xargs rm -f @@ -1186,7 +1186,7 @@ else ALLINCLUDE_ARCHS := $(ARCH) endif else -#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behaviour. +#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behavour. ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS) endif |