diff options
Diffstat (limited to 'arch/arm/boot/dts/imx53-m53evk.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx53-m53evk.dts | 113 |
1 files changed, 4 insertions, 109 deletions
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index c4956b0ffb35..d0e0f57eb432 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -10,17 +10,12 @@ */ /dts-v1/; -#include "imx53.dtsi" +#include "imx53-m53.dtsi" / { model = "DENX M53EVK"; compatible = "denx,imx53-m53evk", "fsl,imx53"; - memory { - reg = <0x70000000 0x20000000>, - <0xb0000000 0x20000000>; - }; - display1: display@di1 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "bgr666"; @@ -81,25 +76,6 @@ #address-cells = <1>; #size-cells = <0>; - reg_3p2v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3P2V"; - regulator-min-microvolt = <3200000>; - regulator-max-microvolt = <3200000>; - regulator-always-on; - }; - - - reg_backlight: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "lcd-supply"; - regulator-min-microvolt = <3200000>; - regulator-max-microvolt = <3200000>; - regulator-always-on; - }; - reg_usbh1_vbus: regulator@3 { compatible = "regulator-fixed"; reg = <3>; @@ -174,50 +150,6 @@ }; }; -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - clock-frequency = <400000>; - status = "okay"; - - stmpe610@41 { - compatible = "st,stmpe610"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x41>; - id = <0>; - blocks = <0x5>; - interrupts = <6 0x0>; - interrupt-parent = <&gpio7>; - irq-trigger = <0x1>; - - stmpe_touchscreen { - compatible = "st,stmpe-ts"; - reg = <0>; - st,sample-time = <4>; - st,mod-12b = <1>; - st,ref-sel = <0>; - st,adc-freq = <1>; - st,ave-ctrl = <3>; - st,touch-det-delay = <3>; - st,settling = <4>; - st,fraction-z = <7>; - st,i-drive = <1>; - }; - }; - - eeprom: eeprom@50 { - compatible = "atmel,24c128"; - reg = <0x50>; - pagesize = <32>; - }; - - rtc: rtc@68 { - compatible = "stm,m41t62"; - reg = <0x68>; - }; -}; - &i2c3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; @@ -229,11 +161,8 @@ pinctrl-0 = <&pinctrl_hog>; imx53-m53evk { - pinctrl_hog: hoggrp { + pinctrl_usb: usbgrp { fsl,pins = < - MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 - MX53_PAD_EIM_EB3__GPIO2_31 0x80000000 - MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 MX53_PAD_GPIO_2__GPIO1_2 0x80000000 MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x80000000 >; @@ -302,13 +231,6 @@ >; }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX53_PAD_EIM_D16__I2C2_SDA 0xc0000000 - MX53_PAD_EIM_EB2__I2C2_SCL 0xc0000000 - >; - }; - pinctrl_i2c3: i2c3grp { fsl,pins = < MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000 @@ -353,26 +275,6 @@ >; }; - pinctrl_nand: nandgrp { - fsl,pins = < - MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4 - MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4 - MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4 - MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4 - MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0 - MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0 - MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4 - MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4 - MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4 - MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4 - MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4 - MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4 - MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4 - MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4 - MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4 - >; - }; - pinctrl_pwm1: pwm1grp { fsl,pins = < MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5 @@ -408,14 +310,6 @@ remote-endpoint = <&display1_in>; }; -&nfc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - status = "okay"; -}; - &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; @@ -427,7 +321,6 @@ }; &ssi2 { - fsl,mode = "i2s-slave"; status = "okay"; }; @@ -450,6 +343,8 @@ }; &usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb>; vbus-supply = <®_usbh1_vbus>; phy_type = "utmi"; status = "okay"; |