diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6q-apalis-eval.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx6q-apalis-eval.dts | 277 |
1 files changed, 1 insertions, 276 deletions
diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts index aa3df862454c..6ce793289114 100644 --- a/arch/arm/boot/dts/imx6q-apalis-eval.dts +++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts @@ -16,284 +16,9 @@ #include <dt-bindings/interrupt-controller/irq.h> #include "imx6q.dtsi" #include "imx6qdl-apalis.dtsi" +#include "imx6qdl-apalis-eval.dtsi" / { model = "Toradex Apalis iMX6Q on Apalis Evaluation Board"; compatible = "toradex,apalis_imx6q-eval", "toradex,apalis_imx6q", "fsl,imx6q"; - - aliases { - rtc0 = &rtc_i2c; - rtc1 = "/soc/aips-bus@02000000/snvs@020cc000/snvs-rtc-lp@34"; - }; - - aliases { - /* the following, together with kernel patches, forces a fixed assignment - between device id and usdhc controller */ - /* i.e. the eMMC on usdhc3 will be /dev/mmcblk0 */ - mmc0 = &usdhc3; /* eMMC */ - mmc1 = &usdhc1; /* MMC1 8bit slot */ - mmc2 = &usdhc2; /* SD1 4bit slot */ - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - wakeup { - label = "wakeup"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WAKEUP>; - debounce-interval = <10>; - gpio-key,wakeup; - }; - }; - - pwmleds { - compatible = "pwm-leds"; - ledpwm1 { - label = "PWM1"; - pwms = <&pwm1 0 50000>; - max-brightness = <255>; - }; - - ledpwm2 { - label = "PWM2"; - pwms = <&pwm2 0 50000>; - max-brightness = <255>; - }; - - ledpwm3 { - label = "PWM3"; - pwms = <&pwm3 0 50000>; - max-brightness = <255>; - }; - }; - - regulators { - reg_usb_otg_vbus: usb_otg_vbus { - status = "okay"; - }; - - reg_usb_host_vbus: usb_host_vbus { - status = "okay"; - }; - }; -}; - -&backlight { -#if 0 - /* PWM polarity: 1 is brightest */ - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; -#else - /* PWM plarity: 0 is brightest */ - brightness-levels = <0 74 128 164 192 210 255>; - default-brightness-level = <1>; -#endif - status = "okay"; -}; - -/* Apalis SPI1 */ -&ecspi1 { - status = "okay"; - - spidev0: spidev@1 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <50000000>; - }; -}; - -/* Apalis SPI2 */ -&ecspi2 { - status = "okay"; - - spidev1: spidev@2 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <50000000>; - }; -}; - -&flexcan1 { - status = "okay"; -}; - -&flexcan2 { - status = "okay"; -}; - -&hdmi_audio { - status = "okay"; -}; - -&hdmi_cec { - status = "okay"; -}; - -&hdmi_core { - status = "okay"; -}; - -&hdmi_video { - status = "okay"; -}; - -/* - * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier - * board) - */ -&i2c1 { - status = "okay"; - - pcap@10 { - /* TouchRevolution Fusion 7 and 10 multi-touch controller */ - compatible = "touchrevolution,fusion-f0710a"; - reg = <0x10>; - gpios = <&gpio6 10 0 /* MXM-11, Pen down interrupt */ - &gpio6 9 0 /* MXM-13, Reset */ - >; - }; - - pcie-switch@58 { - compatible = "plx,pex8605"; - reg = <0x58>; - }; - - /* M41T0M6 real time clock on carrier board */ - rtc_i2c: rtc@68 { - compatible = "st,m41t00"; - reg = <0x68>; - }; -}; - -/* - * GEN2_I2C, CAM: I2C3_SDA/SCL on MXM3 pin 201/203 (unused) - */ -&i2c3 { - status = "okay"; -}; - -/* - * DDC_I2C: I2C2_SDA/SCL on MXM3 pin 205/207 - */ -&i2cddc { - status = "okay"; - - hdmi: edid@50 { - compatible = "fsl,imx6-hdmi-i2c"; - reg = <0x50>; - }; -}; - -&iomuxc { - /* - * Mux the Apalis GPIOs, GPIO7 used for PCIe reset, - * GPIO5, 6 used by optional fusion_F0710A kernel module - */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2 - &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4 - &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6 - &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8>; -}; - -&lcd { - status = "okay"; -}; - -&mxcfb1 { - status = "okay"; -}; - -&mxcfb2 { - status = "okay"; -}; - -&mxcfb3 { - status = "okay"; -}; - -&mxcfb4 { - status = "okay"; -}; - -&pcie { - reset-gpio = <&gpio1 2 0>; - reset-ep-gpio = <&gpio1 28 0>; - status = "okay"; -}; - -&pwm1 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&pwm3 { - status = "okay"; -}; - -&pwm4 { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&sound_hdmi { - status = "okay"; -}; - -&sound_spdif { - status = "okay"; -}; - -&spdif { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -#if 0 - linux,rs485-enabled-at-boot-time; -#endif -}; - -&uart4 { - status = "okay"; -}; - -&uart5 { - status = "okay"; -}; - -&usbh1 { - status = "okay"; -}; - -&usbotg { - status = "okay"; -}; - -/* MMC1 */ -&usdhc1 { - status = "okay"; -}; - -/* SD1 */ -&usdhc2 { - status = "okay"; -}; - -&vdac { - status = "okay"; }; |