diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6sl-evk.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx6sl-evk.dts | 257 |
1 files changed, 256 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 4829aa682aeb..77f9ca2df7f3 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -12,6 +12,19 @@ model = "Freescale i.MX6 SoloLite EVK Board"; compatible = "fsl,imx6sl-evk", "fsl,imx6sl"; + battery: max8903@0 { + compatible = "fsl,max8903-charger"; + pinctrl-names = "default"; + dok_input = <&gpio4 13 1>; + uok_input = <&gpio4 13 1>; + chg_input = <&gpio4 15 1>; + flt_input = <&gpio4 14 1>; + fsl,dcm_always_high; + fsl,dc_valid; + fsl,adc_disable; + status = "okay"; + }; + chosen { stdout-path = &uart1; }; @@ -21,6 +34,19 @@ reg = <0x80000000 0x40000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x14000000>; + linux,cma-default; + }; + }; + backlight_display: backlight_display { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000>; @@ -40,6 +66,11 @@ }; }; + pxp_v4l2_out { + compatible = "fsl,imx6sl-pxp-v4l2"; + status = "okay"; + }; + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg1_vbus"; @@ -95,7 +126,7 @@ sound { compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962"; model = "wm8962-audio"; - ssi-controller = <&ssi2>; + audio-cpu = <&ssi2>; audio-codec = <&codec>; audio-routing = "Headphone Jack", "HPOUTL", @@ -106,6 +137,8 @@ "IN3R", "AMIC"; mux-int-port = <2>; mux-ext-port = <3>; + codec-master; + hp-det-gpios = <&gpio4 19 1>; }; panel { @@ -128,6 +161,14 @@ status = "okay"; }; +&csi { + port { + csi_ep: endpoint { + remote-endpoint = <&ov5640_ep>; + }; + }; +}; + &ecspi1 { cs-gpios = <&gpio4 11 0>; pinctrl-names = "default"; @@ -143,6 +184,15 @@ }; }; +&epdc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epdc_0>; + V3P3-supply = <&V3P3_reg>; + VCOM-supply = <&VCOM_reg>; + DISPLAY-supply = <&DISPLAY_reg>; + status = "okay"; +}; + &fec { pinctrl-names = "default", "sleep"; pinctrl-0 = <&pinctrl_fec>; @@ -151,6 +201,10 @@ status = "okay"; }; +&gpc { + fsl,ldo-bypass = <1>; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -257,6 +311,89 @@ }; }; }; + + elan@10 { + compatible = "elan,elan-touch"; + reg = <0x10>; + interrupt-parent = <&gpio2>; + interrupts = <10 2>; + gpio_elan_cs = <&gpio2 9 0>; + gpio_elan_rst = <&gpio4 4 0>; + gpio_intr = <&gpio2 10 0>; + status = "okay"; + }; + + ma8450@1c { + compatible = "fsl,mma8450"; + reg = <0x1c>; + }; + + max17135@48 { + compatible = "maxim,max17135"; + reg = <0x48>; + vneg_pwrup = <1>; + gvee_pwrup = <2>; + vpos_pwrup = <10>; + gvdd_pwrup = <12>; + gvdd_pwrdn = <1>; + vpos_pwrdn = <2>; + gvee_pwrdn = <8>; + vneg_pwrdn = <10>; + gpio_pmic_pwrgood = <&gpio2 13 0>; + gpio_pmic_vcom_ctrl = <&gpio2 3 0>; + gpio_pmic_wakeup = <&gpio2 14 0>; + gpio_pmic_v3p3 = <&gpio2 7 0>; + gpio_pmic_intr = <&gpio2 12 0>; + + regulators { + DISPLAY_reg: DISPLAY { + regulator-name = "DISPLAY"; + }; + + GVDD_reg: GVDD { + /* 20v */ + regulator-name = "GVDD"; + }; + + GVEE_reg: GVEE { + /* -22v */ + regulator-name = "GVEE"; + }; + + HVINN_reg: HVINN { + /* -22v */ + regulator-name = "HVINN"; + }; + + HVINP_reg: HVINP { + /* 20v */ + regulator-name = "HVINP"; + }; + + VCOM_reg: VCOM { + regulator-name = "VCOM"; + /* Real max value: -500000 */ + regulator-max-microvolt = <4325000>; + /* Real min value: -4325000 */ + regulator-min-microvolt = <500000>; + }; + + VNEG_reg: VNEG { + /* -15v */ + regulator-name = "VNEG"; + }; + + VPOS_reg: VPOS { + /* 15v */ + regulator-name = "VPOS"; + }; + + V3P3_reg: V3P3 { + regulator-name = "V3P3"; + }; + }; + }; + }; &i2c2 { @@ -280,6 +417,34 @@ }; }; +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "disabled"; + + ov5640: ov5640@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_csi_0>; + clocks = <&clks IMX6SL_CLK_CSI>; + clock-names = "csi_mclk"; + AVDD-supply = <&vgen6_reg>; /* 2.8v */ + DVDD-supply = <&vgen2_reg>; /* 1.5v*/ + pwn-gpios = <&gpio1 25 1>; + rst-gpios = <&gpio1 26 0>; + csi_id = <0>; + mclk = <24000000>; + mclk_source = <0>; + port { + ov5640_ep: endpoint { + remote-endpoint = <&csi_ep>; + }; + }; + }; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; @@ -295,6 +460,13 @@ MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x80000000 MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x80000000 MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0 + MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x17000 + MX6SL_PAD_EPDC_PWRCTRL2__GPIO2_IO09 0x80000000 + MX6SL_PAD_KEY_COL6__GPIO4_IO04 0x110b0 + MX6SL_PAD_ECSPI2_MISO__GPIO4_IO14 0x17000 + MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x17000 + MX6SL_PAD_ECSPI2_SS0__GPIO4_IO15 0x17000 + MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x1b0b0 >; }; @@ -316,6 +488,39 @@ >; }; + pinctrl_epdc_0: epdcgrp-0 { + fsl,pins = < + MX6SL_PAD_EPDC_D0__EPDC_DATA00 0x80000000 + MX6SL_PAD_EPDC_D1__EPDC_DATA01 0x80000000 + MX6SL_PAD_EPDC_D2__EPDC_DATA02 0x80000000 + MX6SL_PAD_EPDC_D3__EPDC_DATA03 0x80000000 + MX6SL_PAD_EPDC_D4__EPDC_DATA04 0x80000000 + MX6SL_PAD_EPDC_D5__EPDC_DATA05 0x80000000 + MX6SL_PAD_EPDC_D6__EPDC_DATA06 0x80000000 + MX6SL_PAD_EPDC_D7__EPDC_DATA07 0x80000000 + MX6SL_PAD_EPDC_D8__EPDC_DATA08 0x80000000 + MX6SL_PAD_EPDC_D9__EPDC_DATA09 0x80000000 + MX6SL_PAD_EPDC_D10__EPDC_DATA10 0x80000000 + MX6SL_PAD_EPDC_D11__EPDC_DATA11 0x80000000 + MX6SL_PAD_EPDC_D12__EPDC_DATA12 0x80000000 + MX6SL_PAD_EPDC_D13__EPDC_DATA13 0x80000000 + MX6SL_PAD_EPDC_D14__EPDC_DATA14 0x80000000 + MX6SL_PAD_EPDC_D15__EPDC_DATA15 0x80000000 + MX6SL_PAD_EPDC_GDCLK__EPDC_GDCLK 0x80000000 + MX6SL_PAD_EPDC_GDSP__EPDC_GDSP 0x80000000 + MX6SL_PAD_EPDC_GDOE__EPDC_GDOE 0x80000000 + MX6SL_PAD_EPDC_GDRL__EPDC_GDRL 0x80000000 + MX6SL_PAD_EPDC_SDCLK__EPDC_SDCLK_P 0x80000000 + MX6SL_PAD_EPDC_SDOE__EPDC_SDOE 0x80000000 + MX6SL_PAD_EPDC_SDLE__EPDC_SDLE 0x80000000 + MX6SL_PAD_EPDC_SDSHR__EPDC_SDSHR 0x80000000 + MX6SL_PAD_EPDC_BDR0__EPDC_BDR0 0x80000000 + MX6SL_PAD_EPDC_SDCE0__EPDC_SDCE0 0x80000000 + MX6SL_PAD_EPDC_SDCE1__EPDC_SDCE1 0x80000000 + MX6SL_PAD_EPDC_SDCE2__EPDC_SDCE2 0x80000000 + >; + }; + pinctrl_fec: fecgrp { fsl,pins = < MX6SL_PAD_FEC_MDC__FEC_MDC 0x1b0b0 @@ -358,6 +563,13 @@ >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SL_PAD_EPDC_SDCE2__I2C3_SCL 0x4001b8b1 + MX6SL_PAD_EPDC_SDCE3__I2C3_SDA 0x4001b8b1 + >; + }; + pinctrl_kpp: kppgrp { fsl,pins = < MX6SL_PAD_KEY_ROW0__KEY_ROW0 0x1b010 @@ -427,6 +639,24 @@ >; }; + pinctrl_uart4_1: uart4grp-1 { + fsl,pins = < + MX6SL_PAD_SD1_DAT4__UART4_RX_DATA 0x1b0b1 + MX6SL_PAD_SD1_DAT5__UART4_TX_DATA 0x1b0b1 + MX6SL_PAD_SD1_DAT7__UART4_CTS_B 0x1b0b1 + MX6SL_PAD_SD1_DAT6__UART4_RTS_B 0x1b0b1 + >; + }; + + pinctrl_uart4dte_1: uart4dtegrp-1 { + fsl,pins = < + MX6SL_PAD_SD1_DAT5__UART4_RX_DATA 0x1b0b1 + MX6SL_PAD_SD1_DAT4__UART4_TX_DATA 0x1b0b1 + MX6SL_PAD_SD1_DAT6__UART4_CTS_B 0x1b0b1 + MX6SL_PAD_SD1_DAT7__UART4_RTS_B 0x1b0b1 + >; + }; + pinctrl_usbotg1: usbotg1grp { fsl,pins = < MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059 @@ -543,9 +773,34 @@ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 >; }; + + pinctrl_csi_0: csigrp-0 { + fsl,pins = < + MX6SL_PAD_EPDC_GDRL__CSI_MCLK 0x110b0 + MX6SL_PAD_EPDC_GDCLK__CSI_PIXCLK 0x110b0 + MX6SL_PAD_EPDC_GDSP__CSI_VSYNC 0x110b0 + MX6SL_PAD_EPDC_GDOE__CSI_HSYNC 0x110b0 + MX6SL_PAD_EPDC_SDLE__CSI_DATA09 0x110b0 + MX6SL_PAD_EPDC_SDCLK__CSI_DATA08 0x110b0 + MX6SL_PAD_EPDC_D7__CSI_DATA07 0x110b0 + MX6SL_PAD_EPDC_D6__CSI_DATA06 0x110b0 + MX6SL_PAD_EPDC_D5__CSI_DATA05 0x110b0 + MX6SL_PAD_EPDC_D4__CSI_DATA04 0x110b0 + MX6SL_PAD_EPDC_D3__CSI_DATA03 0x110b0 + MX6SL_PAD_EPDC_D2__CSI_DATA02 0x110b0 + MX6SL_PAD_EPDC_D1__CSI_DATA01 0x110b0 + MX6SL_PAD_EPDC_D0__CSI_DATA00 0x110b0 + MX6SL_PAD_EPDC_SDSHR__GPIO1_IO26 0x80000000 + MX6SL_PAD_EPDC_SDOE__GPIO1_IO25 0x80000000 + >; + }; }; }; +&pxp { + status = "okay"; +}; + &kpp { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_kpp>; |