diff options
Diffstat (limited to 'arch/arm/boot/dts/ste-snowball.dts')
| -rw-r--r-- | arch/arm/boot/dts/ste-snowball.dts | 24 |
1 files changed, 12 insertions, 12 deletions
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index d43f8b19e7dd..206826a855c0 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -409,12 +409,12 @@ }; /* LAN IRQ pin */ snowball_cfg1 { - ste,pins = "GPIO140_B11"; + pins = "GPIO140_B11"; ste,config = <&in_nopull>; }; /* LAN reset pin */ snowball_cfg2 { - ste,pins = "GPIO141_C12"; + pins = "GPIO141_C12"; ste,config = <&gpio_out_hi>; }; @@ -427,7 +427,7 @@ groups = "mc0dat31dir_a_1"; }; snowball_cfg1 { - ste,pins = "GPIO21_AB3"; /* DAT31DIR */ + pins = "GPIO21_AB3"; /* DAT31DIR */ ste,config = <&out_hi>; }; @@ -440,15 +440,15 @@ groups = "ssp0_a_1"; }; snowball_cfg1 { - ste,pins = "GPIO144_B13"; /* FRM */ + pins = "GPIO144_B13"; /* FRM */ ste,config = <&gpio_out_hi>; }; snowball_cfg2 { - ste,pins = "GPIO145_C13"; /* RXD */ + pins = "GPIO145_C13"; /* RXD */ ste,config = <&in_pd>; }; snowball_cfg3 { - ste,pins = + pins = "GPIO146_D13", /* TXD */ "GPIO143_D12"; /* CLK */ ste,config = <&out_lo>; @@ -459,7 +459,7 @@ gpio_led { gpioled_snowball_mode: gpioled_default { snowball_cfg1 { - ste,pins = "GPIO142_C11"; + pins = "GPIO142_C11"; ste,config = <&gpio_out_hi>; }; @@ -469,7 +469,7 @@ accel_snowball_mode: accel_snowball { /* Accelerometer lines */ snowball_cfg1 { - ste,pins = + pins = "GPIO163_C20", /* ACCEL_IRQ1 */ "GPIO164_B21"; /* ACCEL_IRQ2 */ ste,config = <&gpio_in_pu>; @@ -479,7 +479,7 @@ magnetometer { magneto_snowball_mode: magneto_snowball { snowball_cfg1 { - ste,pins = "GPIO165_C21"; /* MAG_DRDY */ + pins = "GPIO165_C21"; /* MAG_DRDY */ ste,config = <&gpio_in_pu>; }; }; @@ -491,7 +491,7 @@ * pull low to reset state */ snowball_cfg1 { - ste,pins = "GPIO171_D23"; /* GBF_ENA_RESET */ + pins = "GPIO171_D23"; /* GBF_ENA_RESET */ ste,config = <&gpio_out_lo>; }; }; @@ -503,13 +503,13 @@ * These are plain GPIO pins used by WLAN */ snowball_cfg1 { - ste,pins = + pins = "GPIO161_D21", /* WLAN_PMU_EN */ "GPIO215_AH13"; /* WLAN_ENA */ ste,config = <&gpio_out_lo>; }; snowball_cfg2 { - ste,pins = "GPIO216_AG12"; /* WLAN_IRQ */ + pins = "GPIO216_AG12"; /* WLAN_IRQ */ ste,config = <&gpio_in_pu>; }; }; |