diff options
Diffstat (limited to 'arch/arm/boot/dts/sun5i.dtsi')
-rw-r--r-- | arch/arm/boot/dts/sun5i.dtsi | 66 |
1 files changed, 32 insertions, 34 deletions
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 5497d985c54a..2fb438c4fe9d 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -127,6 +127,7 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; + dma-ranges; ranges; system-control@1c00000 { @@ -181,6 +182,14 @@ }; }; + mbus: dram-controller@1c01000 { + compatible = "allwinner,sun5i-a13-mbus"; + reg = <0x01c01000 0x1000>; + clocks = <&ccu 99>; + dma-ranges = <0x00000000 0x40000000 0x20000000>; + #interconnect-cells = <1>; + }; + dma: dma-controller@1c02000 { compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; @@ -189,7 +198,7 @@ #dma-cells = <2>; }; - nfc: nand@1c03000 { + nfc: nand-controller@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <37>; @@ -238,11 +247,8 @@ status = "disabled"; port { - #address-cells = <1>; - #size-cells = <0>; - tve0_in_tcon0: endpoint@0 { - reg = <0>; + tve0_in_tcon0: endpoint { remote-endpoint = <&tcon0_out_tve0>; }; }; @@ -278,6 +284,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; status = "disabled"; ports { @@ -285,12 +292,9 @@ #size-cells = <0>; tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon0_in_be0: endpoint@0 { - reg = <0>; + tcon0_in_be0: endpoint { remote-endpoint = <&be0_out_tcon0>; }; }; @@ -365,13 +369,14 @@ phy-names = "usb"; extcon = <&usbphy 0>; allwinner,sram = <&otg_sram 1>; + dr_mode = "otg"; status = "disabled"; }; usbphy: phy@1c13400 { #phy-cells = <1>; compatible = "allwinner,sun5i-a13-usb-phy"; - reg = <0x01c13400 0x10 0x01c14800 0x4>; + reg = <0x01c13400 0x10>, <0x01c14800 0x4>; reg-names = "phy_ctrl", "pmu1"; clocks = <&ccu CLK_USB_PHY0>; clock-names = "usb_phy"; @@ -386,7 +391,6 @@ interrupts = <39>; clocks = <&ccu CLK_AHB_EHCI>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -396,7 +400,6 @@ interrupts = <40>; clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -501,18 +504,18 @@ bias-pull-up; }; - mmc2_8bit_pins: mmc2-8bit-pins { + mmc2_4bit_pc_pins: mmc2-4bit-pc-pins { pins = "PC6", "PC7", "PC8", "PC9", - "PC10", "PC11", "PC12", "PC13", - "PC14", "PC15"; + "PC10", "PC11"; function = "mmc2"; drive-strength = <30>; bias-pull-up; }; - mmc2_4bit_pc_pins: mmc2-4bit-pc-pins { + mmc2_8bit_pins: mmc2-8bit-pins { pins = "PC6", "PC7", "PC8", "PC9", - "PC10", "PC11"; + "PC10", "PC11", "PC12", "PC13", + "PC14", "PC15"; function = "mmc2"; drive-strength = <30>; bias-pull-up; @@ -536,6 +539,11 @@ function = "nand0"; }; + pwm0_pin: pwm0-pin { + pins = "PB2"; + function = "pwm"; + }; + spi2_pe_pins: spi2-pe-pins { pins = "PE1", "PE2", "PE3"; function = "spi2"; @@ -575,11 +583,6 @@ pins = "PG11", "PG12"; function = "uart3"; }; - - pwm0_pin: pwm0-pin { - pins = "PB2"; - function = "pwm"; - }; }; timer@1c20c00 { @@ -727,6 +730,8 @@ clock-names = "ahb", "mod", "ram"; resets = <&ccu RST_DE_FE>; + interconnects = <&mbus 19>; + interconnect-names = "dma-mem"; status = "disabled"; ports { @@ -734,12 +739,9 @@ #size-cells = <0>; fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - fe0_out_be0: endpoint@0 { - reg = <0>; + fe0_out_be0: endpoint { remote-endpoint = <&be0_in_fe0>; }; }; @@ -755,6 +757,8 @@ clock-names = "ahb", "mod", "ram"; resets = <&ccu RST_DE_BE>; + interconnects = <&mbus 18>; + interconnect-names = "dma-mem"; status = "disabled"; assigned-clocks = <&ccu CLK_DE_BE>; @@ -765,23 +769,17 @@ #size-cells = <0>; be0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - be0_in_fe0: endpoint@0 { - reg = <0>; + be0_in_fe0: endpoint { remote-endpoint = <&fe0_out_be0>; }; }; be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - be0_out_tcon0: endpoint@0 { - reg = <0>; + be0_out_tcon0: endpoint { remote-endpoint = <&tcon0_in_be0>; }; }; |