diff options
Diffstat (limited to 'arch/arm/boot/dts/sun9i-a80.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/sun9i-a80.dtsi | 84 |
1 files changed, 19 insertions, 65 deletions
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 6fb292e0b662..0c1eec9000e3 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -289,7 +289,7 @@ status = "disabled"; }; - soc { + soc@20000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -342,7 +342,6 @@ clocks = <&usb_clocks CLK_BUS_HCI0>; resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; - phy-names = "usb"; status = "disabled"; }; @@ -354,7 +353,6 @@ <&usb_clocks CLK_USB_OHCI0>; resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; - phy-names = "usb"; status = "disabled"; }; @@ -376,7 +374,6 @@ clocks = <&usb_clocks CLK_BUS_HCI1>; resets = <&usb_clocks RST_USB1_HCI>; phys = <&usbphy2>; - phy-names = "usb"; status = "disabled"; }; @@ -406,7 +403,6 @@ clocks = <&usb_clocks CLK_BUS_HCI2>; resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; - phy-names = "usb"; status = "disabled"; }; @@ -418,7 +414,6 @@ <&usb_clocks CLK_USB_OHCI2>; resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; - phy-names = "usb"; status = "disabled"; }; @@ -527,7 +522,7 @@ }; gic: interrupt-controller@1c41000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c41000 0x1000>, <0x01c42000 0x2000>, <0x01c44000 0x2000>, @@ -596,12 +591,9 @@ #size-cells = <0>; fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - fe0_out_deu0: endpoint@0 { - reg = <0>; + fe0_out_deu0: endpoint { remote-endpoint = <&deu0_in_fe0>; }; }; @@ -623,12 +615,9 @@ #size-cells = <0>; fe1_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - fe1_out_deu1: endpoint@0 { - reg = <0>; + fe1_out_deu1: endpoint { remote-endpoint = <&deu1_in_fe1>; }; }; @@ -666,12 +655,9 @@ }; be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - be0_out_drc0: endpoint@0 { - reg = <0>; + be0_out_drc0: endpoint { remote-endpoint = <&drc0_in_be0>; }; }; @@ -709,12 +695,9 @@ }; be1_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - be1_out_drc1: endpoint@0 { - reg = <0>; + be1_out_drc1: endpoint { remote-endpoint = <&drc1_in_be1>; }; }; @@ -738,12 +721,9 @@ #size-cells = <0>; deu0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - deu0_in_fe0: endpoint@0 { - reg = <0>; + deu0_in_fe0: endpoint { remote-endpoint = <&fe0_out_deu0>; }; }; @@ -783,12 +763,9 @@ #size-cells = <0>; deu1_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - deu1_in_fe1: endpoint@0 { - reg = <0>; + deu1_in_fe1: endpoint { remote-endpoint = <&fe1_out_deu1>; }; }; @@ -828,23 +805,17 @@ #size-cells = <0>; drc0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - drc0_in_be0: endpoint@0 { - reg = <0>; + drc0_in_be0: endpoint { remote-endpoint = <&be0_out_drc0>; }; }; drc0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - drc0_out_tcon0: endpoint@0 { - reg = <0>; + drc0_out_tcon0: endpoint { remote-endpoint = <&tcon0_in_drc0>; }; }; @@ -868,23 +839,17 @@ #size-cells = <0>; drc1_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - drc1_in_be1: endpoint@0 { - reg = <0>; + drc1_in_be1: endpoint { remote-endpoint = <&be1_out_drc1>; }; }; drc1_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - drc1_out_tcon1: endpoint@0 { - reg = <0>; + drc1_out_tcon1: endpoint { remote-endpoint = <&tcon1_in_drc1>; }; }; @@ -900,25 +865,21 @@ resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>; reset-names = "lcd", "edp"; clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; ports { #address-cells = <1>; #size-cells = <0>; tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon0_in_drc0: endpoint@0 { - reg = <0>; + tcon0_in_drc0: endpoint { remote-endpoint = <&drc0_out_tcon0>; }; }; tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -938,19 +899,14 @@ #size-cells = <0>; tcon1_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon1_in_drc1: endpoint@0 { - reg = <0>; + tcon1_in_drc1: endpoint { remote-endpoint = <&drc1_out_tcon1>; }; }; tcon1_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -997,15 +953,13 @@ gpio-controller; interrupt-controller; #interrupt-cells = <3>; - #size-cells = <0>; #gpio-cells = <3>; gmac_rgmii_pins: gmac-rgmii-pins { - allwinner,pins = "PA0", "PA1", "PA2", "PA3", - "PA4", "PA5", "PA7", "PA8", - "PA9", "PA10", "PA12", "PA13", - "PA15", "PA16", "PA17"; - allwinner,function = "gmac"; + pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", + "PA7", "PA8", "PA9", "PA10", "PA12", + "PA13", "PA15", "PA16", "PA17"; + function = "gmac"; /* * data lines in RGMII mode use DDR mode * and need a higher signal drive strength |