diff options
Diffstat (limited to 'arch/arm/boot/dts')
94 files changed, 1116 insertions, 1077 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index faacd52370d2..b8d9840895c2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -570,6 +570,7 @@ dtb-$(CONFIG_SOC_OMAP5) += \ omap5-uevm.dtb dtb-$(CONFIG_SOC_DRA7XX) += \ am57xx-beagle-x15.dtb \ + am57xx-beagle-x15-revb1.dtb \ am57xx-cl-som-am57x.dtb \ am57xx-sbc-am57x.dtb \ am572x-idk.dtb \ diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index c8609d8d2c55..dd45d172a892 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -24,12 +24,12 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; - vbat: fixedregulator@0 { + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; regulator-min-microvolt = <5000000>; @@ -37,7 +37,7 @@ regulator-boot-on; }; - wl12xx_vmmc: fixedregulator@2 { + wl12xx_vmmc: fixedregulator2 { pinctrl-names = "default"; pinctrl-0 = <&wl12xx_gpio>; compatible = "regulator-fixed"; @@ -226,7 +226,7 @@ #address-cells = <1>; #size-cells = <1>; - elm_id = <&elm>; + ti,elm-id = <&elm>; }; }; diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index 58a05f7d0b7c..c2bee452dab8 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -29,13 +29,13 @@ compatible = "gpio-leds"; - led@0 { + led0 { label = "base:red:user"; gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; /* gpio1_21 */ default-state = "off"; }; - led@1 { + led1 { label = "base:green:user"; gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; /* gpio2_0 */ default-state = "off"; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index e247c15e5176..007b5e5a51a9 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -13,7 +13,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; @@ -28,28 +28,28 @@ compatible = "gpio-leds"; - led@2 { + led2 { label = "beaglebone:green:heartbeat"; gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; - led@3 { + led3 { label = "beaglebone:green:mmc0"; gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; }; - led@4 { + led4 { label = "beaglebone:green:usr2"; gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; linux,default-trigger = "cpu0"; default-state = "off"; }; - led@5 { + led5 { label = "beaglebone:green:usr3"; gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc1"; @@ -57,7 +57,7 @@ }; }; - vmmcsd_fixed: fixedregulator@0 { + vmmcsd_fixed: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi index 1d647358f1c1..f9ee5859c154 100644 --- a/arch/arm/boot/dts/am335x-chilisom.dtsi +++ b/arch/arm/boot/dts/am335x-chilisom.dtsi @@ -19,7 +19,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts index 817b1dec0683..947c81b7aaaf 100644 --- a/arch/arm/boot/dts/am335x-cm-t335.dts +++ b/arch/arm/boot/dts/am335x-cm-t335.dts @@ -17,7 +17,7 @@ model = "CompuLab CM-T335"; compatible = "compulab,cm-t335", "ti,am33xx"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x8000000>; /* 128 MB */ }; @@ -26,7 +26,7 @@ compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&gpio_led_pins>; - led@0 { + led0 { label = "cm_t335:green"; gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; /* gpio2_0 */ linux,default-trigger = "heartbeat"; @@ -34,7 +34,7 @@ }; /* regulator for mmc */ - vmmc_fixed: fixedregulator@0 { + vmmc_fixed: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vmmc_fixed"; regulator-min-microvolt = <3300000>; @@ -42,7 +42,7 @@ }; /* Regulator for WiFi */ - vwlan_fixed: fixedregulator@2 { + vwlan_fixed: fixedregulator2 { compatible = "regulator-fixed"; regulator-name = "vwlan_fixed"; gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */ diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 5d28712ad253..3cf896a2a204 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -20,12 +20,12 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; - vbat: fixedregulator@0 { + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; regulator-min-microvolt = <5000000>; @@ -33,13 +33,13 @@ regulator-boot-on; }; - lis3_reg: fixedregulator@1 { + lis3_reg: fixedregulator1 { compatible = "regulator-fixed"; regulator-name = "lis3_reg"; regulator-boot-on; }; - wlan_en_reg: fixedregulator@2 { + wlan_en_reg: fixedregulator2 { compatible = "regulator-fixed"; regulator-name = "wlan-en-regulator"; regulator-min-microvolt = <1800000>; @@ -53,7 +53,7 @@ enable-active-high; }; - matrix_keypad: matrix_keypad@0 { + matrix_keypad: matrix_keypad0 { compatible = "gpio-matrix-keypad"; debounce-delay-ms = <5>; col-scan-delay-us = <2>; @@ -73,20 +73,20 @@ 0x0201006c>; /* DOWN */ }; - gpio_keys: volume_keys@0 { + gpio_keys: volume_keys0 { compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; autorepeat; - switch@9 { + switch9 { label = "volume-up"; linux,code = <115>; gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; wakeup-source; }; - switch@10 { + switch10 { label = "volume-down"; linux,code = <114>; gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 09308d66645b..0e5e8dcdcc24 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -27,12 +27,12 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; - vbat: fixedregulator@0 { + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; regulator-min-microvolt = <5000000>; @@ -40,13 +40,13 @@ regulator-boot-on; }; - lis3_reg: fixedregulator@1 { + lis3_reg: fixedregulator1 { compatible = "regulator-fixed"; regulator-name = "lis3_reg"; regulator-boot-on; }; - wl12xx_vmmc: fixedregulator@2 { + wl12xx_vmmc: fixedregulator2 { pinctrl-names = "default"; pinctrl-0 = <&wl12xx_gpio>; compatible = "regulator-fixed"; @@ -58,7 +58,7 @@ enable-active-high; }; - vtt_fixed: fixedregulator@3 { + vtt_fixed: fixedregulator3 { compatible = "regulator-fixed"; regulator-name = "vtt"; regulator-min-microvolt = <1500000>; @@ -75,26 +75,26 @@ compatible = "gpio-leds"; - led@1 { + led1 { label = "evmsk:green:usr0"; gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@2 { + led2 { label = "evmsk:green:usr1"; gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@3 { + led3 { label = "evmsk:green:mmc0"; gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; }; - led@4 { + led4 { label = "evmsk:green:heartbeat"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; @@ -102,31 +102,31 @@ }; }; - gpio_buttons: gpio_buttons@0 { + gpio_buttons: gpio_buttons0 { compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - switch@1 { + switch1 { label = "button0"; linux,code = <0x100>; gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; }; - switch@2 { + switch2 { label = "button1"; linux,code = <0x101>; gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; }; - switch@3 { + switch3 { label = "button2"; linux,code = <0x102>; gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>; wakeup-source; }; - switch@4 { + switch4 { label = "button3"; linux,code = <0x103>; gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index 7d8b8fefdf08..85e04c205542 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -19,12 +19,12 @@ model = "TI AM3359 ICE-V2"; compatible = "ti,am3359-icev2", "ti,am33xx"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; - vbat: fixedregulator@0 { + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; regulator-min-microvolt = <5000000>; @@ -32,7 +32,7 @@ regulator-boot-on; }; - vtt_fixed: fixedregulator@1 { + vtt_fixed: fixedregulator1 { compatible = "regulator-fixed"; regulator-name = "vtt"; regulator-min-microvolt = <1500000>; @@ -43,52 +43,52 @@ enable-active-high; }; - leds@0 { + leds0 { compatible = "gpio-leds"; - led@0 { + led0 { label = "out0"; gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@1 { + led1 { label = "out1"; gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@2 { + led2 { label = "out2"; gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@3 { + led3 { label = "out3"; gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@4 { + led4 { label = "out4"; gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@5 { + led5 { label = "out5"; gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@6 { + led6 { label = "out6"; gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@7 { + led7 { label = "out7"; gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>; default-state = "off"; @@ -96,49 +96,58 @@ }; /* Tricolor status LEDs */ - leds@1 { + leds1 { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&user_leds>; - led@0 { + led0 { label = "status0:red:cpu0"; gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; default-state = "off"; linux,default-trigger = "cpu0"; }; - led@1 { + led1 { label = "status0:green:usr"; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@2 { + led2 { label = "status0:yellow:usr"; gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@3 { + led3 { label = "status1:red:mmc0"; gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; default-state = "off"; linux,default-trigger = "mmc0"; }; - led@4 { + led4 { label = "status1:green:usr"; gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@5 { + led5 { label = "status1:yellow:usr"; gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; default-state = "off"; }; }; + gpio-decoder { + compatible = "gpio-decoder"; + gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>, + <&pca9536 2 GPIO_ACTIVE_HIGH>, + <&pca9536 1 GPIO_ACTIVE_HIGH>, + <&pca9536 0 GPIO_ACTIVE_HIGH>; + linux,axis = <0>; /* ABS_X */ + decoder-max-value = <9>; + }; }; &am33xx_pinmux { diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index df63484ef9b3..a5769a8f5fc8 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -20,7 +20,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; @@ -31,14 +31,14 @@ compatible = "gpio-leds"; - led@0 { + led0 { label = "com:green:user"; gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; - vbat: fixedregulator@0 { + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; regulator-min-microvolt = <5000000>; @@ -46,7 +46,7 @@ regulator-boot-on; }; - vmmc: fixedregulator@0 { + vmmc: fixedregulator1 { compatible = "regulator-fixed"; regulator-name = "vmmc"; regulator-min-microvolt = <3300000>; @@ -161,7 +161,7 @@ #address-cells = <1>; #size-cells = <1>; - elm_id = <&elm>; + ti,elm-id = <&elm>; /* MTD partition table */ partition@0 { diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts index d97b0efa43f3..1d6c6fa703e4 100644 --- a/arch/arm/boot/dts/am335x-lxm.dts +++ b/arch/arm/boot/dts/am335x-lxm.dts @@ -19,13 +19,13 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; /* Power supply provides a fixed 5V @2A */ - vbat: fixedregulator@0 { + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; regulator-min-microvolt = <5000000>; @@ -34,7 +34,7 @@ }; /* Power supply provides a fixed 3.3V @3A */ - vmmcsd_fixed: fixedregulator@1 { + vmmcsd_fixed: fixedregulator1 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts index f313999c503e..483d585c8908 100644 --- a/arch/arm/boot/dts/am335x-nano.dts +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -19,7 +19,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; @@ -27,7 +27,7 @@ leds { compatible = "gpio-leds"; - led@0 { + led0 { label = "nanobone:green:usr1"; gpios = <&gpio1 5 0>; default-state = "off"; diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index 8867aaaec54d..30e2f8770aaf 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -20,7 +20,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; @@ -41,15 +41,15 @@ compatible = "ti,da830-evm-audio"; }; - vbat: fixedregulator@0 { + vbat: fixedregulator0 { compatible = "regulator-fixed"; }; - v3v3c_reg: fixedregulator@1 { + v3v3c_reg: fixedregulator1 { compatible = "regulator-fixed"; }; - vdd5_reg: fixedregulator@2 { + vdd5_reg: fixedregulator2 { compatible = "regulator-fixed"; }; }; @@ -595,14 +595,14 @@ pinctrl-names = "default"; pinctrl-0 = <&user_leds_pins>; - led@0 { + led0 { label = "pepper:user0:blue"; gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; linux,default-trigger = "none"; default-state = "off"; }; - led@1 { + led1 { label = "pepper:user1:red"; gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "none"; @@ -616,21 +616,21 @@ #address-cells = <1>; #size-cells = <0>; - button@0 { + button0 { label = "home"; linux,code = <KEY_HOME>; gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; wakeup-source; }; - button@1 { + button1 { label = "menu"; linux,code = <KEY_MENU>; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; wakeup-source; }; - buttons@2 { + buttons2 { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index 86f773165d5c..75e24add3f13 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -25,7 +25,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; @@ -33,7 +33,7 @@ regulators { compatible = "simple-bus"; - vcc5v: fixedregulator@0 { + vcc5v: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vcc5v"; regulator-min-microvolt = <5000000>; @@ -197,7 +197,7 @@ gpmc,wr-access-ns = <30>; gpmc,wr-data-mux-bus-ns = <0>; - elm_id = <&elm>; + ti,elm-id = <&elm>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts index 837d5b80ea1d..bf8727a19ece 100644 --- a/arch/arm/boot/dts/am335x-shc.dts +++ b/arch/arm/boot/dts/am335x-shc.dts @@ -64,50 +64,50 @@ compatible = "gpio-leds"; - led@1 { + led1 { label = "shc:power:red"; gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@2 { + led2 { label = "shc:power:bl"; gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; linux,default-trigger = "timer"; default-state = "on"; }; - led@3 { + led3 { label = "shc:lan:red"; gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@4 { + led4 { label = "shc:lan:bl"; gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@5 { + led5 { label = "shc:cloud:red"; gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led@6 { + led6 { label = "shc:cloud:bl"; gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; default-state = "off"; }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; - vmmcsd_fixed: fixedregulator@0 { + vmmcsd_fixed: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index a6efbe6eda3b..b0dfa6f14cd5 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -19,6 +19,11 @@ }; }; + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + chosen { stdout-path = &uart0; }; @@ -28,25 +33,25 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins>; - led@0 { + led0 { label = "sl50:green:usr0"; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@1 { + led1 { label = "sl50:red:usr1"; gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@2 { + led2 { label = "sl50:green:usr2"; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@3 { + led3 { label = "sl50:red:usr3"; gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; default-state = "off"; @@ -103,7 +108,7 @@ reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; }; - vmmcsd_fixed: fixedregulator@0 { + vmmcsd_fixed: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi index 282f6d4b27bc..02c67365c4e1 100644 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ b/arch/arm/boot/dts/am335x-wega.dtsi @@ -11,10 +11,14 @@ model = "Phytec AM335x phyBOARD-WEGA"; compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"; + sound: sound_iface { + compatible = "ti,da830-evm-audio"; + }; + regulators { compatible = "simple-bus"; - vcc3v3: fixedregulator@1 { + vcc3v3: fixedregulator1 { compatible = "regulator-fixed"; regulator-name = "vcc3v3"; regulator-min-microvolt = <3300000>; @@ -24,6 +28,58 @@ }; }; +/* Audio */ +&am33xx_pinmux { + mcasp0_pins: pinmux_mcasp0 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9AC, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahclkx.mcasp0_ahclkx */ + AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ + AM33XX_IOPAD(0x9A8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */ + >; + }; +}; + +&i2c0 { + tlv320aic3007: tlv320aic3007@18 { + compatible = "ti,tlv320aic3007"; + reg = <0x18>; + AVDD-supply = <&vcc3v3>; + IOVDD-supply = <&vcc3v3>; + DRVDD-supply = <&vcc3v3>; + DVDD-supply = <&vdig1_reg>; + status = "okay"; + }; +}; + +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */ + tdm-slots = <2>; + serial-dir = < + 2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */ + >; + tx-num-evt = <16>; + rt-num-evt = <16>; + status = "okay"; +}; + +&sound { + ti,model = "AM335x-Wega"; + ti,audio-codec = <&tlv320aic3007>; + ti,mcasp-controller = <&mcasp0>; + ti,audio-routing = + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "LINE1L", "Line In", + "LINE1R", "Line In"; + clocks = <&mcasp0_fck>; + clock-names = "mclk"; + status = "okay"; +}; + /* CAN Busses */ &am33xx_pinmux { dcan1_pins: pinmux_dcan1 { @@ -99,6 +155,12 @@ status = "okay"; }; +/* Power */ +&vdig1_reg { + regulator-boot-on; + regulator-always-on; +}; + /* UARTs */ &am33xx_pinmux { uart0_pins: pinmux_uart0 { diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 9e214bfd32d2..194d884c9de1 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -11,11 +11,11 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/am33xx.h> -#include "skeleton.dtsi" - / { compatible = "ti,am33xx"; interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <1>; aliases { i2c0 = &i2c0; diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts index f9d8f3948c4a..083ff5073435 100644 --- a/arch/arm/boot/dts/am3517-craneboard.dts +++ b/arch/arm/boot/dts/am3517-craneboard.dts @@ -15,7 +15,7 @@ model = "TI AM3517 CraneBoard (TMDSEVM3517)"; compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index b4127c6493a2..0e4a125f78e3 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -13,7 +13,7 @@ model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)"; compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index 5e3f5e86ffcf..0db19d39d24c 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -15,7 +15,7 @@ serial3 = &uart4; }; - ocp { + ocp@68000000 { am35x_otg_hs: am35x_otg_hs@5c040000 { compatible = "ti,omap3-musb"; ti,hwmods = "am35x_otg_hs"; diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/am3517_mt_ventoux.dts index fdf5ce63c8e6..3395783c5b4e 100644 --- a/arch/arm/boot/dts/am3517_mt_ventoux.dts +++ b/arch/arm/boot/dts/am3517_mt_ventoux.dts @@ -13,7 +13,7 @@ model = "TeeJet Mt.Ventoux"; compatible = "teejet,mt_ventoux", "ti,omap3"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 0fadae5396e1..a275fa956813 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -11,12 +11,16 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" - / { compatible = "ti,am4372", "ti,am43"; interrupt-parent = <&wakeupgen>; + #address-cells = <1>; + #size-cells = <1>; + memory@0 { + device_type = "memory"; + reg = <0 0>; + }; aliases { i2c0 = &i2c0; @@ -132,7 +136,7 @@ cache-level = <2>; }; - ocp { + ocp@44000000 { compatible = "ti,am4372-l3-noc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts index 9551c4713173..9e92d480576b 100644 --- a/arch/arm/boot/dts/am437x-cm-t43.dts +++ b/arch/arm/boot/dts/am437x-cm-t43.dts @@ -209,7 +209,6 @@ #interrupt-cells = <2>; dcdc1: regulator-dcdc1 { - compatible = "ti,tps65218-dcdc1"; regulator-name = "vdd_core"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <1144000>; @@ -218,7 +217,6 @@ }; dcdc2: regulator-dcdc2 { - compatible = "ti,tps65218-dcdc2"; regulator-name = "vdd_mpu"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <1378000>; @@ -227,7 +225,6 @@ }; dcdc3: regulator-dcdc3 { - compatible = "ti,tps65218-dcdc3"; regulator-name = "vdcdc3"; regulator-suspend-enable; regulator-min-microvolt = <1500000>; @@ -237,7 +234,6 @@ }; dcdc5: regulator-dcdc5 { - compatible = "ti,tps65218-dcdc5"; regulator-name = "v1_0bat"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -246,7 +242,6 @@ }; dcdc6: regulator-dcdc6 { - compatible = "ti,tps65218-dcdc6"; regulator-name = "v1_8bat"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -255,7 +250,6 @@ }; ldo1: regulator-ldo1 { - compatible = "ti,tps65218-ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 14677d599595..957840cc7b78 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -58,7 +58,7 @@ default-brightness-level = <8>; }; - matrix_keypad: matrix_keypad@0 { + matrix_keypad: matrix_keypad0 { compatible = "gpio-matrix-keypad"; debounce-delay-ms = <5>; col-scan-delay-us = <2>; @@ -513,7 +513,6 @@ #interrupt-cells = <2>; dcdc1: regulator-dcdc1 { - compatible = "ti,tps65218-dcdc1"; regulator-name = "vdd_core"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <1144000>; @@ -522,7 +521,6 @@ }; dcdc2: regulator-dcdc2 { - compatible = "ti,tps65218-dcdc2"; regulator-name = "vdd_mpu"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <1378000>; @@ -531,33 +529,42 @@ }; dcdc3: regulator-dcdc3 { - compatible = "ti,tps65218-dcdc3"; regulator-name = "vdcdc3"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + regulator-state-disk { + regulator-off-in-suspend; + }; }; + dcdc5: regulator-dcdc5 { - compatible = "ti,tps65218-dcdc5"; regulator-name = "v1_0bat"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-boot-on; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; dcdc6: regulator-dcdc6 { - compatible = "ti,tps65218-dcdc6"; regulator-name = "v1_8bat"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo1: regulator-ldo1 { - compatible = "ti,tps65218-ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index 12a69518383e..25ce611c6568 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -104,7 +104,7 @@ #address-cells = <1>; #size-cells = <0>; - switch@0 { + switch0 { label = "power-button"; linux,code = <KEY_POWER>; gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 5687d6b4da60..319d94205350 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -64,7 +64,7 @@ }; }; - matrix_keypad: matrix_keypad@0 { + matrix_keypad: matrix_keypad0 { compatible = "gpio-matrix-keypad"; pinctrl-names = "default"; @@ -93,28 +93,28 @@ pinctrl-names = "default"; pinctrl-0 = <&leds_pins>; - led@0 { + led0 { label = "am437x-sk:red:heartbeat"; gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 0 */ linux,default-trigger = "heartbeat"; default-state = "off"; }; - led@1 { + led1 { label = "am437x-sk:green:mmc1"; gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 1 */ linux,default-trigger = "mmc0"; default-state = "off"; }; - led@2 { + led2 { label = "am437x-sk:blue:cpu0"; gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 2 */ linux,default-trigger = "cpu0"; default-state = "off"; }; - led@3 { + led3 { label = "am437x-sk:blue:usr3"; gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 3 */ default-state = "off"; @@ -428,7 +428,6 @@ #interrupt-cells = <2>; dcdc1: regulator-dcdc1 { - compatible = "ti,tps65218-dcdc1"; /* VDD_CORE limits min of OPP50 and max of OPP100 */ regulator-name = "vdd_core"; regulator-min-microvolt = <912000>; @@ -438,7 +437,6 @@ }; dcdc2: regulator-dcdc2 { - compatible = "ti,tps65218-dcdc2"; /* VDD_MPU limits min of OPP50 and max of OPP_NITRO */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <912000>; @@ -448,16 +446,20 @@ }; dcdc3: regulator-dcdc3 { - compatible = "ti,tps65218-dcdc3"; regulator-name = "vdds_ddr"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + regulator-state-disk { + regulator-off-in-suspend; + }; }; dcdc4: regulator-dcdc4 { - compatible = "ti,tps65218-dcdc4"; regulator-name = "v3_3d"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -465,8 +467,31 @@ regulator-always-on; }; + dcdc5: regulator-dcdc5 { + compatible = "ti,tps65218-dcdc5"; + regulator-name = "v1_0bat"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + dcdc6: regulator-dcdc6 { + compatible = "ti,tps65218-dcdc6"; + regulator-name = "v1_8bat"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + ldo1: regulator-ldo1 { - compatible = "ti,tps65218-ldo1"; regulator-name = "v1_8d"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index ad32e55532f8..9d35c3f07cad 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -32,7 +32,7 @@ enable-active-high; }; - vbat: fixedregulator@0 { + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; regulator-min-microvolt = <5000000>; @@ -67,7 +67,7 @@ }; }; - matrix_keypad: matrix_keypad@0 { + matrix_keypad: matrix_keypad0 { compatible = "gpio-matrix-keypad"; debounce-delay-ms = <5>; col-scan-delay-us = <2>; @@ -421,7 +421,6 @@ #interrupt-cells = <2>; dcdc1: regulator-dcdc1 { - compatible = "ti,tps65218-dcdc1"; regulator-name = "vdd_core"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <1144000>; @@ -430,7 +429,6 @@ }; dcdc2: regulator-dcdc2 { - compatible = "ti,tps65218-dcdc2"; regulator-name = "vdd_mpu"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <1378000>; @@ -439,7 +437,6 @@ }; dcdc3: regulator-dcdc3 { - compatible = "ti,tps65218-dcdc3"; regulator-name = "vdcdc3"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; @@ -448,7 +445,6 @@ }; dcdc4: regulator-dcdc4 { - compatible = "ti,tps65218-dcdc4"; regulator-name = "vdcdc4"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -457,21 +453,18 @@ }; dcdc5: regulator-dcdc5 { - compatible = "ti,tps65218-dcdc5"; regulator-name = "v1_0bat"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; dcdc6: regulator-dcdc6 { - compatible = "ti,tps65218-dcdc6"; regulator-name = "v1_8bat"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; ldo1: regulator-ldo1 { - compatible = "ti,tps65218-ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index e3acb99703e1..87bbc66f0f21 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -18,7 +18,7 @@ compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi new file mode 100644 index 000000000000..ec85ff9004e8 --- /dev/null +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -0,0 +1,596 @@ +/* + * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dra74x.dtsi" +#include "am57xx-commercial-grade.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; + + aliases { + rtc0 = &mcp_rtc; + rtc1 = &tps659038_rtc; + rtc2 = &rtc; + display0 = &hdmi0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + vdd_3v3: fixedregulator-vdd_3v3 { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + vin-supply = <®en1>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + aic_dvdd: fixedregulator-aic_dvdd { + compatible = "regulator-fixed"; + regulator-name = "aic_dvdd_fixed"; + vin-supply = <&vdd_3v3>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vtt_fixed: fixedregulator-vtt { + /* TPS51200 */ + compatible = "regulator-fixed"; + regulator-name = "vtt_fixed"; + vin-supply = <&smps3_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; + }; + + leds { + compatible = "gpio-leds"; + + led0 { + label = "beagle-x15:usr0"; + gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led1 { + label = "beagle-x15:usr1"; + gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + + led2 { + label = "beagle-x15:usr2"; + gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led3 { + label = "beagle-x15:usr3"; + gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "disk-activity"; + default-state = "off"; + }; + }; + + gpio_fan: gpio_fan { + /* Based on 5v 500mA AFB02505HHB */ + compatible = "gpio-fan"; + gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0>, + <13000 1>; + #cooling-cells = <2>; + }; + + hdmi0: connector { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tpd12s015_out>; + }; + }; + }; + + tpd12s015: encoder { + compatible = "ti,tpd12s015"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpd12s015_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + + port@1 { + reg = <1>; + + tpd12s015_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + + sound0: sound0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "BeagleBoard-X15"; + simple-audio-card,widgets = + "Line", "Line Out", + "Line", "Line In"; + simple-audio-card,routing = + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "MIC2L", "Line In", + "MIC2R", "Line In"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound0_master>; + simple-audio-card,frame-master = <&sound0_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp3>; + }; + + sound0_master: simple-audio-card,codec { + sound-dai = <&tlv320aic3104>; + clocks = <&clkout2_clk>; + }; + }; +}; + +&dra7_pmx_core { + mmc1_pins_default: mmc1_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc2_pins_default: mmc2_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; +}; +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + tps659038: tps659038@58 { + compatible = "ti,tps659038"; + reg = <0x58>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + tps659038_pmic { + compatible = "ti,tps659038-pmic"; + + regulators { + smps12_reg: smps12 { + /* VDD_MPU */ + regulator-name = "smps12"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps3_reg: smps3 { + /* VDD_DDR */ + regulator-name = "smps3"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45_reg: smps45 { + /* VDD_DSPEVE, VDD_IVA, VDD_GPU */ + regulator-name = "smps45"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps6_reg: smps6 { + /* VDD_CORE */ + regulator-name = "smps6"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-boot-on; + }; + + /* SMPS7 unused */ + + smps8_reg: smps8 { + /* VDD_1V8 */ + regulator-name = "smps8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + /* SMPS9 unused */ + + ldo1_reg: ldo1 { + /* VDD_SD / VDDSHV8 */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + /* VDD_SHV5 */ + regulator-name = "ldo2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3_reg: ldo3 { + /* VDDA_1V8_PHYA */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + /* VDDA_1V8_PHYB */ + regulator-name = "ldo4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo9_reg: ldo9 { + /* VDD_RTC */ + regulator-name = "ldo9"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + }; + + ldoln_reg: ldoln { + /* VDDA_1V8_PLL */ + regulator-name = "ldoln"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldousb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + regen1: regen1 { + /* VDD_3V3_ON */ + regulator-name = "regen1"; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + tps659038_rtc: tps659038_rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&tps659038>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + }; + + tps659038_pwr_button: tps659038_pwr_button { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&tps659038>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + ti,palmas-long-press-seconds = <12>; + }; + + tps659038_gpio: tps659038_gpio { + compatible = "ti,palmas-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + extcon_usb2: tps659038_usb { + compatible = "ti,palmas-usb-vid"; + ti,enable-vbus-detection; + vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; + }; + + }; + + tmp102: tmp102@48 { + compatible = "ti,tmp102"; + reg = <0x48>; + interrupt-parent = <&gpio7>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; + }; + + tlv320aic3104: tlv320aic3104@18 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3104"; + reg = <0x18>; + assigned-clocks = <&clkoutmux2_clk_mux>; + assigned-clock-parents = <&sys_clk2_dclk_div>; + + status = "okay"; + adc-settle-ms = <40>; + + AVDD-supply = <&vdd_3v3>; + IOVDD-supply = <&vdd_3v3>; + DRVDD-supply = <&vdd_3v3>; + DVDD-supply = <&aic_dvdd>; + }; + + eeprom: eeprom@50 { + compatible = "at,24c32"; + reg = <0x50>; + }; +}; + +&i2c3 { + status = "okay"; + clock-frequency = <400000>; + + mcp_rtc: rtc@6f { + compatible = "microchip,mcp7941x"; + reg = <0x6f>; + interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>, + <&dra7_pmx_core 0x424>; + interrupt-names = "irq", "wakeup"; + + vcc-supply = <&vdd_3v3>; + wakeup-source; + }; +}; + +&gpio7 { + ti,no-reset-on-init; + ti,no-idle-on-init; +}; + +&cpu0 { + cpu0-supply = <&smps12_reg>; + voltage-tolerance = <1>; +}; + +&uart3 { + status = "okay"; + interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <&dra7_pmx_core 0x3f8>; +}; + +&mac { + status = "okay"; + dual_emac; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <2>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <2>; +}; + +&mmc1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_default>; + + bus-width = <4>; + cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ +}; + +&mmc2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_default>; + + vmmc-supply = <&vdd_3v3>; + bus-width = <8>; + ti,non-removable; + cap-mmc-dual-data-rate; +}; + +&sata { + status = "okay"; +}; + +&usb2_phy1 { + phy-supply = <&ldousb_reg>; +}; + +&usb2_phy2 { + phy-supply = <&ldousb_reg>; +}; + +&usb1 { + dr_mode = "host"; +}; + +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; + +&usb2 { + /* + * Stand alone usage is peripheral only. + * However, with some resistor modifications + * this port can be used via expansion connectors + * as "host" or "dual-role". If so, provide + * the necessary dr_mode override in the expansion + * board's DT. + */ + dr_mode = "peripheral"; +}; + +&cpu_trips { + cpu_alert1: cpu_alert1 { + temperature = <50000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; +}; + +&cpu_cooling_maps { + map1 { + trip = <&cpu_alert1>; + cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; +}; + +&thermal_zones { + board_thermal: board_thermal { + polling-delay-passive = <1250>; /* milliseconds */ + polling-delay = <1500>; /* milliseconds */ + + /* sensor ID */ + thermal-sensors = <&tmp102 0>; + + board_trips: trips { + board_alert0: board_alert { + temperature = <40000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + + board_crit: board_crit { + temperature = <105000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + + board_cooling_maps: cooling-maps { + map0 { + trip = <&board_alert0>; + cooling-device = + <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; +}; + +&dss { + status = "ok"; + + vdda_video-supply = <&ldoln_reg>; +}; + +&hdmi { + status = "ok"; + vdda-supply = <&ldo4_reg>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&tpd12s015_in>; + }; + }; +}; + +&pcie1 { + gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; +}; + +&mcasp3 { + #sound-dai-cells = <0>; + assigned-clocks = <&mcasp3_ahclkx_mux>; + assigned-clock-parents = <&sys_clkin2>; + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializers */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts new file mode 100644 index 000000000000..ca85570629fd --- /dev/null +++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "am57xx-beagle-x15-common.dtsi" + +/ { + model = "TI AM5728 BeagleBoard-X15 rev B1"; +}; + +&tpd12s015 { + gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ + <&gpio2 30 GPIO_ACTIVE_HIGH>, /* gpio2_30, LS OE */ + <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ +}; + +&mmc1 { + vmmc-supply = <&vdd_3v3>; + vmmc-aux-supply = <&ldo1_reg>; +}; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index c4d04c5293b9..8c66f2efd283 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -1,822 +1,24 @@ /* - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -/dts-v1/; -#include "dra74x.dtsi" -#include "am57xx-commercial-grade.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> +#include "am57xx-beagle-x15-common.dtsi" / { + /* NOTE: This describes the "original" pre-production A2 revision */ model = "TI AM5728 BeagleBoard-X15"; - compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; - - aliases { - rtc0 = &mcp_rtc; - rtc1 = &tps659038_rtc; - rtc2 = &rtc; - display0 = &hdmi0; - }; - - memory { - device_type = "memory"; - reg = <0x0 0x80000000 0x0 0x80000000>; - }; - - vdd_3v3: fixedregulator-vdd_3v3 { - compatible = "regulator-fixed"; - regulator-name = "vdd_3v3"; - vin-supply = <®en1>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - aic_dvdd: fixedregulator-aic_dvdd { - compatible = "regulator-fixed"; - regulator-name = "aic_dvdd_fixed"; - vin-supply = <&vdd_3v3>; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vtt_fixed: fixedregulator-vtt { - /* TPS51200 */ - compatible = "regulator-fixed"; - regulator-name = "vtt_fixed"; - vin-supply = <&smps3_reg>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_pins_default>; - - led@0 { - label = "beagle-x15:usr0"; - gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - - led@1 { - label = "beagle-x15:usr1"; - gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "cpu0"; - default-state = "off"; - }; - - led@2 { - label = "beagle-x15:usr2"; - gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; - - led@3 { - label = "beagle-x15:usr3"; - gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "disk-activity"; - default-state = "off"; - }; - }; - - gpio_fan: gpio_fan { - /* Based on 5v 500mA AFB02505HHB */ - compatible = "gpio-fan"; - gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = <0 0>, - <13000 1>; - #cooling-cells = <2>; - }; - - hdmi0: connector { - compatible = "hdmi-connector"; - label = "hdmi"; - - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&tpd12s015_out>; - }; - }; - }; - - tpd12s015: encoder { - compatible = "ti,tpd12s015"; - - pinctrl-names = "default"; - pinctrl-0 = <&tpd12s015_pins>; - - gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ - <&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */ - <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tpd12s015_in: endpoint { - remote-endpoint = <&hdmi_out>; - }; - }; - - port@1 { - reg = <1>; - - tpd12s015_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; - }; - }; - }; - - sound0: sound0 { - compatible = "simple-audio-card"; - simple-audio-card,name = "BeagleBoard-X15"; - simple-audio-card,widgets = - "Line", "Line Out", - "Line", "Line In"; - simple-audio-card,routing = - "Line Out", "LLOUT", - "Line Out", "RLOUT", - "MIC2L", "Line In", - "MIC2R", "Line In"; - simple-audio-card,format = "dsp_b"; - simple-audio-card,bitclock-master = <&sound0_master>; - simple-audio-card,frame-master = <&sound0_master>; - simple-audio-card,bitclock-inversion; - - simple-audio-card,cpu { - sound-dai = <&mcasp3>; - }; - - sound0_master: simple-audio-card,codec { - sound-dai = <&tlv320aic3104>; - clocks = <&clkout2_clk>; - }; - }; }; -&dra7_pmx_core { - leds_pins_default: leds_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37a8, PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */ - DRA7XX_CORE_IOPAD(0x37ac, PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */ - DRA7XX_CORE_IOPAD(0x37c0, PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */ - DRA7XX_CORE_IOPAD(0x37c4, PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */ - >; - }; - - i2c1_pins_default: i2c1_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */ - DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */ - >; - }; - - hdmi_pins: pinmux_hdmi_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ - DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ - >; - }; - - i2c3_pins_default: i2c3_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */ - DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */ - >; - }; - - uart3_pins_default: uart3_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */ - DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */ - >; - }; - - mmc1_pins_default: mmc1_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ - DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ - DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ - DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ - DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ - DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ - DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ - >; - }; - - mmc2_pins_default: mmc2_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ - DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ - DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ - DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ - DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ - DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ - DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ - DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ - DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ - DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ - >; - }; - - cpsw_pins_default: cpsw_pins_default { - pinctrl-single,pins = < - /* Slave 1 */ - DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */ - DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */ - DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */ - DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */ - DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */ - DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */ - DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */ - DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */ - DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */ - DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */ - DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */ - DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */ - - /* Slave 2 */ - DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */ - DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */ - DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */ - DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */ - DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */ - DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */ - DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */ - DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */ - DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */ - DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */ - DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */ - DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */ - >; - - }; - - cpsw_pins_sleep: cpsw_pins_sleep { - pinctrl-single,pins = < - /* Slave 1 */ - DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15) - - /* Slave 2 */ - DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15) - >; - }; - - davinci_mdio_pins_default: davinci_mdio_pins_default { - pinctrl-single,pins = < - /* MDIO */ - DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */ - DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */ - >; - }; - - davinci_mdio_pins_sleep: davinci_mdio_pins_sleep { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x363c, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT | MUX_MODE15) - >; - }; - - tps659038_pins_default: tps659038_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */ - >; - }; - - tmp102_pins_default: tmp102_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */ - >; - }; - - mcp79410_pins_default: mcp79410_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */ - >; - }; - - usb1_pins: pinmux_usb1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ - >; - }; - - tpd12s015_pins: pinmux_tpd12s015_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */ - DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */ - DRA7XX_CORE_IOPAD(0x3770, PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */ - >; - }; - - clkout2_pins_default: clkout2_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3694, PIN_OUTPUT_PULLDOWN | MUX_MODE9) /* xref_clk0.clkout2 */ - >; - }; - - clkout2_pins_sleep: clkout2_pins_sleep { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3694, PIN_INPUT | MUX_MODE15) /* xref_clk0.clkout2 */ - >; - }; - - mcasp3_pins_default: mcasp3_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */ - DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */ - DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */ - DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */ - >; - }; - - mcasp3_pins_sleep: mcasp3_pins_sleep { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15) - >; - }; -}; - -&i2c1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_default>; - clock-frequency = <400000>; - - tps659038: tps659038@58 { - compatible = "ti,tps659038"; - reg = <0x58>; - interrupt-parent = <&gpio1>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&tps659038_pins_default>; - - #interrupt-cells = <2>; - interrupt-controller; - - ti,system-power-controller; - - tps659038_pmic { - compatible = "ti,tps659038-pmic"; - - regulators { - smps12_reg: smps12 { - /* VDD_MPU */ - regulator-name = "smps12"; - regulator-min-microvolt = < 850000>; - regulator-max-microvolt = <1250000>; - regulator-always-on; - regulator-boot-on; - }; - - smps3_reg: smps3 { - /* VDD_DDR */ - regulator-name = "smps3"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - smps45_reg: smps45 { - /* VDD_DSPEVE, VDD_IVA, VDD_GPU */ - regulator-name = "smps45"; - regulator-min-microvolt = < 850000>; - regulator-max-microvolt = <1250000>; - regulator-always-on; - regulator-boot-on; - }; - - smps6_reg: smps6 { - /* VDD_CORE */ - regulator-name = "smps6"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1150000>; - regulator-always-on; - regulator-boot-on; - }; - - /* SMPS7 unused */ - - smps8_reg: smps8 { - /* VDD_1V8 */ - regulator-name = "smps8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - /* SMPS9 unused */ - - ldo1_reg: ldo1 { - /* VDD_SD / VDDSHV8 */ - regulator-name = "ldo1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2_reg: ldo2 { - /* VDD_SHV5 */ - regulator-name = "ldo2"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo3_reg: ldo3 { - /* VDDA_1V8_PHYA */ - regulator-name = "ldo3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo4_reg: ldo4 { - /* VDDA_1V8_PHYB */ - regulator-name = "ldo4"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo9_reg: ldo9 { - /* VDD_RTC */ - regulator-name = "ldo9"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - regulator-always-on; - regulator-boot-on; - }; - - ldoln_reg: ldoln { - /* VDDA_1V8_PLL */ - regulator-name = "ldoln"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldousb_reg: ldousb { - /* VDDA_3V_USB: VDDA_USBHS33 */ - regulator-name = "ldousb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - - regen1: regen1 { - /* VDD_3V3_ON */ - regulator-name = "regen1"; - regulator-boot-on; - regulator-always-on; - }; - }; - }; - - tps659038_rtc: tps659038_rtc { - compatible = "ti,palmas-rtc"; - interrupt-parent = <&tps659038>; - interrupts = <8 IRQ_TYPE_EDGE_FALLING>; - wakeup-source; - }; - - tps659038_pwr_button: tps659038_pwr_button { - compatible = "ti,palmas-pwrbutton"; - interrupt-parent = <&tps659038>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - wakeup-source; - ti,palmas-long-press-seconds = <12>; - }; - - tps659038_gpio: tps659038_gpio { - compatible = "ti,palmas-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - - extcon_usb2: tps659038_usb { - compatible = "ti,palmas-usb-vid"; - ti,enable-vbus-detection; - vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; - }; - - }; - - tmp102: tmp102@48 { - compatible = "ti,tmp102"; - reg = <0x48>; - pinctrl-names = "default"; - pinctrl-0 = <&tmp102_pins_default>; - interrupt-parent = <&gpio7>; - interrupts = <16 IRQ_TYPE_LEVEL_LOW>; - #thermal-sensor-cells = <1>; - }; - - tlv320aic3104: tlv320aic3104@18 { - #sound-dai-cells = <0>; - compatible = "ti,tlv320aic3104"; - reg = <0x18>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&clkout2_pins_default>; - pinctrl-1 = <&clkout2_pins_sleep>; - assigned-clocks = <&clkoutmux2_clk_mux>; - assigned-clock-parents = <&sys_clk2_dclk_div>; - - status = "okay"; - adc-settle-ms = <40>; - - AVDD-supply = <&vdd_3v3>; - IOVDD-supply = <&vdd_3v3>; - DRVDD-supply = <&vdd_3v3>; - DVDD-supply = <&aic_dvdd>; - }; - - eeprom: eeprom@50 { - compatible = "at,24c32"; - reg = <0x50>; - }; -}; - -&i2c3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins_default>; - clock-frequency = <400000>; - - mcp_rtc: rtc@6f { - compatible = "microchip,mcp7941x"; - reg = <0x6f>; - interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>, - <&dra7_pmx_core 0x424>; - interrupt-names = "irq", "wakeup"; - - pinctrl-names = "default"; - pinctrl-0 = <&mcp79410_pins_default>; - - vcc-supply = <&vdd_3v3>; - wakeup-source; - }; -}; - -&gpio7 { - ti,no-reset-on-init; - ti,no-idle-on-init; -}; - -&cpu0 { - cpu0-supply = <&smps12_reg>; - voltage-tolerance = <1>; -}; - -&uart3 { - status = "okay"; - interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, - <&dra7_pmx_core 0x3f8>; - - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_default>; -}; - -&mac { - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cpsw_pins_default>; - pinctrl-1 = <&cpsw_pins_sleep>; - dual_emac; -}; - -&cpsw_emac0 { - phy_id = <&davinci_mdio>, <1>; - phy-mode = "rgmii"; - dual_emac_res_vlan = <1>; -}; - -&cpsw_emac1 { - phy_id = <&davinci_mdio>, <2>; - phy-mode = "rgmii"; - dual_emac_res_vlan = <2>; -}; - -&davinci_mdio { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&davinci_mdio_pins_default>; - pinctrl-1 = <&davinci_mdio_pins_sleep>; +&tpd12s015 { + gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ + <&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */ + <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ }; &mmc1 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_default>; - vmmc-supply = <&ldo1_reg>; - bus-width = <4>; - cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ -}; - -&mmc2 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_default>; - - vmmc-supply = <&vdd_3v3>; - bus-width = <8>; - ti,non-removable; - cap-mmc-dual-data-rate; -}; - -&sata { - status = "okay"; -}; - -&usb2_phy1 { - phy-supply = <&ldousb_reg>; -}; - -&usb2_phy2 { - phy-supply = <&ldousb_reg>; -}; - -&usb1 { - dr_mode = "host"; - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins>; -}; - -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - -&usb2 { - /* - * Stand alone usage is peripheral only. - * However, with some resistor modifications - * this port can be used via expansion connectors - * as "host" or "dual-role". If so, provide - * the necessary dr_mode override in the expansion - * board's DT. - */ - dr_mode = "peripheral"; -}; - -&cpu_trips { - cpu_alert1: cpu_alert1 { - temperature = <50000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "active"; - }; -}; - -&cpu_cooling_maps { - map1 { - trip = <&cpu_alert1>; - cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; -}; - -&thermal_zones { - board_thermal: board_thermal { - polling-delay-passive = <1250>; /* milliseconds */ - polling-delay = <1500>; /* milliseconds */ - - /* sensor ID */ - thermal-sensors = <&tmp102 0>; - - board_trips: trips { - board_alert0: board_alert { - temperature = <40000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "active"; - }; - - board_crit: board_crit { - temperature = <105000>; /* millicelsius */ - hysteresis = <0>; /* millicelsius */ - type = "critical"; - }; - }; - - board_cooling_maps: cooling-maps { - map0 { - trip = <&board_alert0>; - cooling-device = - <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; -}; - -&dss { - status = "ok"; - - vdda_video-supply = <&ldoln_reg>; -}; - -&hdmi { - status = "ok"; - vdda-supply = <&ldo4_reg>; - - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_pins>; - - port { - hdmi_out: endpoint { - remote-endpoint = <&tpd12s015_in>; - }; - }; -}; - -&pcie1 { - gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; -}; - -&mcasp3 { - #sound-dai-cells = <0>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&mcasp3_pins_default>; - pinctrl-1 = <&mcasp3_pins_sleep>; - assigned-clocks = <&mcasp3_ahclkx_mux>; - assigned-clock-parents = <&sys_clkin2>; - status = "okay"; - - op-mode = <0>; /* MCASP_IIS_MODE */ - tdm-slots = <2>; - /* 4 serializers */ - serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ - 1 2 0 0 - >; - tx-num-evt = <32>; - rx-num-evt = <32>; -}; - -&mailbox5 { - status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { - status = "okay"; - }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { - status = "okay"; - }; -}; - -&mailbox6 { - status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { - status = "okay"; - }; - mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { - status = "okay"; - }; }; diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index 378b142ef88c..203266f88480 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -19,7 +19,7 @@ model = "CompuLab CL-SOM-AM57x"; compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */ }; @@ -29,7 +29,7 @@ pinctrl-names = "default"; pinctrl-0 = <&leds_pins_default>; - led@0 { + led0 { label = "cl-som-am57x:green"; gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 0e63b9dff6e7..03cec62260e1 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -304,3 +304,52 @@ ti,non-removable; max-frequency = <96000000>; }; + +&qspi { + status = "okay"; + + spi-max-frequency = <76800000>; + m25p80@0 { + compatible = "s25fl256s1", "jedec,spi-nor"; + spi-max-frequency = <76800000>; + reg = <0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + + /* MTD partition table. + * The ROM checks the first four physical blocks + * for a valid file to boot and the flash here is + * 64KiB block size. + */ + partition@0 { + label = "QSPI.SPL"; + reg = <0x00000000 0x000040000>; + }; + partition@1 { + label = "QSPI.u-boot"; + reg = <0x00040000 0x00100000>; + }; + partition@2 { + label = "QSPI.u-boot-spl-os"; + reg = <0x00140000 0x00080000>; + }; + partition@3 { + label = "QSPI.u-boot-env"; + reg = <0x001c0000 0x00010000>; + }; + partition@4 { + label = "QSPI.u-boot-env.backup1"; + reg = <0x001d0000 0x0010000>; + }; + partition@5 { + label = "QSPI.kernel"; + reg = <0x001e0000 0x0800000>; + }; + partition@6 { + label = "QSPI.file-system"; + reg = <0x009e0000 0x01620000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 1a15db8e376b..5fd4c37680fd 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -136,7 +136,7 @@ pinctrl-names = "default"; pinctrl-0 = <&nand_cs3_pins>; }; - vbat: fixedregulator@0 { + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; regulator-min-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts index 4128fa91823c..d6657b3bae84 100644 --- a/arch/arm/boot/dts/dm8148-evm.dts +++ b/arch/arm/boot/dts/dm8148-evm.dts @@ -12,13 +12,13 @@ model = "DM8148 EVM"; compatible = "ti,dm8148-evm", "ti,dm8148"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; /* MIC94060YC6 controlled by SD1_POW pin */ - vmmcsd_fixed: fixedregulator@0 { + vmmcsd_fixed: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts index 3f184863e0c5..63883b3479f9 100644 --- a/arch/arm/boot/dts/dm8148-t410.dts +++ b/arch/arm/boot/dts/dm8148-t410.dts @@ -11,7 +11,7 @@ model = "HP t410 Smart Zero Client"; compatible = "hp,t410", "ti,dm8148"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; @@ -27,7 +27,7 @@ regulator-always-on; }; - vmmcsd_fixed: fixedregulator@0 { + vmmcsd_fixed: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 68e412c9863c..ff90a6ce6bdc 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -7,11 +7,11 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/dm814x.h> -#include "skeleton.dtsi" - / { compatible = "ti,dm814"; interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <1>; aliases { i2c0 = &i2c1; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index f50348bdd857..0bf55fa72dea 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -12,14 +12,14 @@ model = "DM8168 EVM"; compatible = "ti,dm8168-evm", "ti,dm8168"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000 /* 1 GB */ 0xc0000000 0x40000000>; /* 1 GB */ }; /* FDC6331L controlled by SD_POW pin */ - vmmcsd_fixed: fixedregulator@0 { + vmmcsd_fixed: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index 44e39c743b53..f1e0f771ff29 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -7,11 +7,11 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/omap.h> -#include "skeleton.dtsi" - / { compatible = "ti,dm816"; interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <1>; aliases { i2c0 = &i2c1; diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts index f820573f4a4a..155eb32ee213 100644 --- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts +++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts @@ -12,13 +12,13 @@ model = "DRA62x J5 Eco EVM"; compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; /* MIC94060YC6 controlled by SD1_POW pin */ - vmmcsd_fixed: fixedregulator@0 { + vmmcsd_fixed: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index bafcfac067ec..132f2be10889 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -16,7 +16,7 @@ model = "TI DRA742"; compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */ }; @@ -105,25 +105,25 @@ leds { compatible = "gpio-leds"; - led@0 { + led0 { label = "dra7:usr1"; gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@1 { + led1 { label = "dra7:usr2"; gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@2 { + led2 { label = "dra7:usr3"; gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led@3 { + led3 { label = "dra7:usr4"; gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>; default-state = "off"; @@ -664,10 +664,10 @@ &qspi { status = "okay"; - spi-max-frequency = <64000000>; + spi-max-frequency = <76800000>; m25p80@0 { compatible = "s25fl256s1"; - spi-max-frequency = <64000000>; + spi-max-frequency = <76800000>; reg = <0>; spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index a0fbbf18d50c..d4fcd68f6349 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -10,8 +10,6 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/dra.h> -#include "skeleton.dtsi" - #define MAX_SOURCES 400 / { @@ -285,6 +283,7 @@ 0x82000000 0 0x20013000 0x13000 0 0xffed000>; #interrupt-cells = <1>; num-lanes = <1>; + linux,pci-domain = <0>; ti,hwmods = "pcie1"; phys = <&pcie1_phy>; phy-names = "pcie-phy0"; @@ -320,6 +319,7 @@ 0x82000000 0 0x30013000 0x13000 0 0xffed000>; #interrupt-cells = <1>; num-lanes = <1>; + linux,pci-domain = <1>; ti,hwmods = "pcie2"; phys = <&pcie2_phy>; phy-names = "pcie-phy0"; @@ -1397,7 +1397,7 @@ ti,hwmods = "ocp2scp1"; usb2_phy1: phy@4a084000 { - compatible = "ti,omap-usb2"; + compatible = "ti,dra7x-usb2", "ti,omap-usb2"; reg = <0x4a084000 0x400>; syscon-phy-power = <&scm_conf 0x300>; clocks = <&usb_phy1_always_on_clk32k>, @@ -1701,7 +1701,7 @@ mac: ethernet@48484000 { compatible = "ti,dra7-cpsw","ti,cpsw"; ti,hwmods = "gmac"; - clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>; + clocks = <&gmac_main_clk>, <&gmac_rft_clk_mux>; clock-names = "fck", "cpts"; cpdma_channels = <8>; ale_entries = <1024>; @@ -1710,7 +1710,7 @@ mac_control = <0x20>; slaves = <2>; active_slave = <0>; - cpts_clock_mult = <0x80000000>; + cpts_clock_mult = <0x784CFE14>; cpts_clock_shift = <29>; reg = <0x48484000 0x1000 0x48485200 0x2E00>; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index 9d3cf50ca37e..c94d8d64710d 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -681,10 +681,10 @@ &qspi { status = "okay"; - spi-max-frequency = <64000000>; + spi-max-frequency = <76800000>; m25p80@0 { compatible = "s25fl256s1"; - spi-max-frequency = <64000000>; + spi-max-frequency = <76800000>; reg = <0>; spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts index f9cfd3bb4dc2..064b322a7a04 100644 --- a/arch/arm/boot/dts/dra72-evm-revc.dts +++ b/arch/arm/boot/dts/dra72-evm-revc.dts @@ -11,7 +11,7 @@ / { model = "TI DRA722 Rev C EVM"; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */ }; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index cc1d32ca4a8a..e3a9b6985693 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -9,7 +9,7 @@ / { model = "TI DRA722"; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */ }; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 8378b44ee567..3330738e4c6e 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1003,6 +1003,14 @@ ti,index-power-of-two; }; + gmac_main_clk: gmac_main_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&gmac_250m_dclk_div>; + clock-mult = <1>; + clock-div = <2>; + }; + l3init_480m_dclk_div: l3init_480m_dclk_div@1ac { #clock-cells = <0>; compatible = "ti,divider-clock"; @@ -1718,13 +1726,12 @@ reg = <0x0c00>; }; - gmac_gmii_ref_clk_div: gmac_gmii_ref_clk_div@13d0 { + rmii_50mhz_clk_mux: rmii_50mhz_clk_mux@13d0 { #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll_gmac_m2_ck>; + compatible = "ti,mux-clock"; + clocks = <&dpll_gmac_h11x2_ck>, <&rmii_clk_ck>; ti,bit-shift = <24>; reg = <0x13d0>; - ti,dividers = <2>; }; gmac_rft_clk_mux: gmac_rft_clk_mux@13d0 { diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 365f39ff58bb..0ff1c2de95bf 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -35,10 +35,15 @@ ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { - linux,mtd-name = "micron,mt29f4g16abbda3w"; + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + linux,mtd-name = "micron,mt29f4g16abbda3w"; nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <44>; @@ -54,10 +59,6 @@ gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; gpmc,device-width = <2>; - - gpmc,page-burst-access-ns = <5>; - gpmc,cycle2cycle-delay-ns = <50>; - #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 5e9a13c0eaf7..731ec37aed5b 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -13,6 +13,11 @@ }; }; + memory@0 { + device_type = "memory"; + reg = <0 0>; + }; + leds { compatible = "gpio-leds"; user0 { @@ -46,6 +51,7 @@ linux,mtd-name = "micron,mt29f4g16abbda3w"; nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <44>; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 578fa2a54dce..4f793a025a72 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -12,11 +12,11 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/omap.h> -#include "skeleton.dtsi" - / { compatible = "ti,omap2430", "ti,omap2420", "ti,omap2"; interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <1>; aliases { serial0 = &uart1; diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts index 34cdecb4fdda..9265c0b9c3f3 100644 --- a/arch/arm/boot/dts/omap2420-h4.dts +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -13,7 +13,7 @@ model = "TI OMAP2420 H4 board"; compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x4000000>; /* 64 MB */ }; diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi index db95aadcca70..7e5ffc583c90 100644 --- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi +++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi @@ -1,7 +1,7 @@ #include "omap2420.dtsi" / { - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x8000000>; /* 128 MB */ }; diff --git a/arch/arm/boot/dts/omap2430-sdp.dts b/arch/arm/boot/dts/omap2430-sdp.dts index 6b36ede58488..4f7d9d7c00c7 100644 --- a/arch/arm/boot/dts/omap2430-sdp.dts +++ b/arch/arm/boot/dts/omap2430-sdp.dts @@ -13,7 +13,7 @@ model = "TI OMAP2430 SDP"; compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x8000000>; /* 128 MB */ }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 8ffde06281ad..85e297ed0ea1 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -19,7 +19,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index a19d907d4850..4be85ce59dd1 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -19,7 +19,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index 6a0df13fa0f3..57b9a028a49a 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -4,7 +4,7 @@ / { - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi index 586010179752..f330c69cc683 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -10,7 +10,7 @@ #include "omap34xx.dtsi" / { - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index ed449827c3d3..4f9a76544602 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -15,7 +15,7 @@ model = "TI OMAP37XX EVM (TMDSEVM3730)"; compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index e10dcd0fa539..99b2bfcd1059 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -14,7 +14,7 @@ model = "TI OMAP35XX EVM (TMDSEVM3530)"; compatible = "ti,omap3-evm", "ti,omap3"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index c09a0574af90..b3a8b1f24499 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -21,7 +21,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; @@ -102,7 +102,7 @@ backlight { compatible = "pwm-backlight"; - pwms = <&pwm11 0 2000000 0>; + pwms = <&pwm11 0 12000000 0>; pwm-names = "backlight"; brightness-levels = <0 11 20 30 40 50 60 70 80 90 100>; default-brightness-level = <9>; /* => 90 */ diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index f4f2ce46d681..54c4c07bbe4a 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -13,7 +13,7 @@ #include "omap36xx.dtsi" / { - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 2f353dadfa40..e28fe13cb007 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -15,7 +15,7 @@ model = "TI OMAP3430 LDP (Zoom1 Labrador)"; compatible = "ti,omap3-ldp", "ti,omap3"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x8000000>; /* 128 MB */ }; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index eff816e0bc0a..fa611a5e4850 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -17,7 +17,7 @@ bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0"; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x8000000>; /* 128 MB */ }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 2a6078a8422c..87ca50b53002 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -54,7 +54,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 927b17fc4ed8..5d8c4b4a4205 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -24,12 +24,12 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; - vemmc: fixedregulator@0 { + vemmc: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "VEMMC"; regulator-min-microvolt = <2900000>; @@ -39,7 +39,7 @@ enable-active-high; }; - vwlan_fixed: fixedregulator@2 { + vwlan_fixed: fixedregulator2 { compatible = "regulator-fixed"; regulator-name = "VWLAN"; gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */ diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi index 3b3a75997f81..99a7eee6e61f 100644 --- a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi @@ -44,7 +44,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&button_pins>; - button0@10 { + button0 { label = "button0"; linux,code = <BTN_0>; gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* gpio_10 */ diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index de256fa8da48..401fae838fe9 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -11,6 +11,12 @@ */ / { + + memory@0 { + device_type = "memory"; + reg = <0 0>; + }; + pwmleds { compatible = "pwm-leds"; @@ -223,7 +229,9 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x20000000>; + ranges = <0 0 0x30000000 0x1000000>, /* CS0 */ + <4 0 0x2b000000 0x1000000>, /* CS4 */ + <5 0 0x2c000000 0x1000000>; /* CS5 */ nand@0,0 { compatible = "ti,omap2-nand"; diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi index 7df27926ead2..56dbd113430e 100644 --- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi @@ -37,13 +37,13 @@ pinctrl-0 = <&button_pins>; #address-cells = <1>; #size-cells = <0>; - button0@23 { + button0 { label = "button0"; linux,code = <BTN_0>; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */ wakeup-source; }; - button1@14 { + button1 { label = "button1"; linux,code = <BTN_1>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */ @@ -55,8 +55,6 @@ #include "omap-gpmc-smsc9221.dtsi" &gpmc { - ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */ - ethernet@gpmc { reg = <5 0 0xff>; interrupt-parent = <&gpio6>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi index ca86da68220c..854117dc0b77 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -119,7 +119,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mcspi1_pins>; - lcd0: display { + lcd0: display@1 { compatible = "lgphilips,lb035q02"; label = "lcd35"; diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi index 250cc7fe5d5e..286f5baddf07 100644 --- a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi @@ -37,13 +37,13 @@ pinctrl-0 = <&button_pins>; #address-cells = <1>; #size-cells = <0>; - button0@23 { + button0 { label = "button0"; linux,code = <BTN_0>; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */ wakeup-source; }; - button1@14 { + button1 { label = "button1"; linux,code = <BTN_1>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */ diff --git a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi index 8df7ec35d17d..a8020fb42464 100644 --- a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi @@ -37,13 +37,13 @@ pinctrl-0 = <&button_pins>; #address-cells = <1>; #size-cells = <0>; - button0@23 { + button0 { label = "button0"; linux,code = <BTN_0>; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */ wakeup-source; }; - button1@14 { + button1 { label = "button1"; linux,code = <BTN_1>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */ diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi index 0ea2c451c809..11965737e2c9 100644 --- a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi @@ -37,13 +37,13 @@ pinctrl-0 = <&button_pins>; #address-cells = <1>; #size-cells = <0>; - button0@23 { + button0 { label = "button0"; linux,code = <BTN_0>; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */ wakeup-source; }; - button1@14 { + button1 { label = "button1"; linux,code = <BTN_1>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */ diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi index 9e24b6a1d07b..1b304e2f1bd2 100644 --- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi @@ -27,8 +27,6 @@ #include "omap-gpmc-smsc9221.dtsi" &gpmc { - ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */ - ethernet@gpmc { reg = <5 0 0xff>; interrupt-parent = <&gpio6>; diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi index 334109e14613..82e98ee3023a 100644 --- a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi @@ -15,9 +15,6 @@ #include "omap-gpmc-smsc9221.dtsi" &gpmc { - ranges = <4 0 0x2b000000 0x1000000>, /* CS4 */ - <5 0 0x2c000000 0x1000000>; /* CS5 */ - smsc1: ethernet@gpmc { reg = <5 0 0xff>; interrupt-parent = <&gpio6>; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index dbc4dc721cc2..53e007abdc71 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -18,7 +18,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; @@ -45,28 +45,28 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins>; - led@1 { + led1 { label = "pandora::sd1"; gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* GPIO_128 */ linux,default-trigger = "mmc0"; default-state = "off"; }; - led@2 { + led2 { label = "pandora::sd2"; gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* GPIO_129 */ linux,default-trigger = "mmc1"; default-state = "off"; }; - led@3 { + led3 { label = "pandora::bluetooth"; gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; /* GPIO_158 */ linux,default-trigger = "heartbeat"; default-state = "off"; }; - led@4 { + led4 { label = "pandora::wifi"; gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; /* GPIO_159 */ linux,default-trigger = "mmc2"; diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts index 78a1184cb312..bc4498e77bc9 100644 --- a/arch/arm/boot/dts/omap3-sniper.dts +++ b/arch/arm/boot/dts/omap3-sniper.dts @@ -20,7 +20,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index 644d3c8ea66a..dc80886b5329 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -26,7 +26,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index c29b41dc7b95..45e2ce0803de 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -20,7 +20,7 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 4c3c471d2a83..353d818ce5a6 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -12,11 +12,11 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/omap.h> -#include "skeleton.dtsi" - / { compatible = "ti,omap3430", "ti,omap3"; interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <1>; aliases { i2c0 = &i2c1; @@ -78,7 +78,7 @@ * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ - ocp { + ocp@68000000 { compatible = "ti,omap3-l3-smx", "simple-bus"; reg = <0x68000000 0x10000>; interrupts = <9 10>; diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index a0dc8d854142..abd6921143be 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -13,7 +13,7 @@ model = "TI OMAP3430 SDP"; compatible = "ti,omap3430-sdp", "ti,omap3"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index e44656258225..e41c52d3b113 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -28,7 +28,7 @@ }; }; - ocp { + ocp@68000000 { omap3_pmx_core2: pinmux@480025d8 { compatible = "ti,omap3-padconf", "pinctrl-single"; reg = <0x480025d8 0x24>; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 8b7979153008..718fa88407cd 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -30,7 +30,7 @@ }; }; - ocp { + ocp@68000000 { uart4: serial@49042000 { compatible = "ti,omap3-uart"; reg = <0x49042000 0x400>; diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index 6b39808b8313..1b825128a7b9 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -32,7 +32,7 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - button0@121 { + button0 { label = "button0"; linux,code = <BTN_0>; gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */ diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi index a90b582e4c3f..ec0bd9779e1a 100644 --- a/arch/arm/boot/dts/omap4-duovero.dtsi +++ b/arch/arm/boot/dts/omap4-duovero.dtsi @@ -12,7 +12,7 @@ model = "Gumstix Duovero"; compatible = "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; diff --git a/arch/arm/boot/dts/omap4-kc1.dts b/arch/arm/boot/dts/omap4-kc1.dts index 2251bd54e4e6..e3763ac75719 100644 --- a/arch/arm/boot/dts/omap4-kc1.dts +++ b/arch/arm/boot/dts/omap4-kc1.dts @@ -13,7 +13,7 @@ model = "Amazon Kindle Fire (first generation)"; compatible = "amazon,omap4-kc1", "ti,omap4430", "ti,omap4"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index f8f13952cfeb..1673689e6705 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -8,7 +8,7 @@ #include "elpida_ecb240abacn.dtsi" / { - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; @@ -446,6 +446,8 @@ pinctrl-names = "default"; pinctrl-0 = <&wl12xx_pins>; vmmc-supply = <&wl12xx_vmmc>; + interrupts-extended = <&wakeupgen GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core 0x10e>; non-removable; bus-width = <4>; cap-power-off-card; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 10d73a784050..d728ec963111 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -14,7 +14,7 @@ model = "TI OMAP4 SDP board"; compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi index 873cfc87260c..758b6eb7ae43 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi @@ -12,7 +12,7 @@ model = "Variscite VAR-SOM-OM44"; compatible = "variscite,var-som-om44", "ti,omap4460", "ti,omap4"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 3fdc51cd0fad..0ced079b7ae3 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -10,11 +10,11 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/omap.h> -#include "skeleton.dtsi" - / { compatible = "ti,omap4430", "ti,omap4"; interrupt-parent = <&wakeupgen>; + #address-cells = <1>; + #size-cells = <1>; aliases { i2c0 = &i2c1; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 5196113202a2..6365635fea5c 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -77,16 +77,6 @@ reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */ }; - leds { - compatible = "gpio-leds"; - led@1 { - label = "omap5:blue:usr1"; - gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */ - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - }; - tpd12s015: encoder { compatible = "ti,tpd12s015"; @@ -332,7 +322,7 @@ wlcore_irq_pin: pinmux_wlcore_irq_pin { pinctrl-single,pins = < - OMAP5_IOPAD(0x40, PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ + OMAP5_IOPAD(0x40, PIN_INPUT | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ >; }; }; @@ -355,15 +345,17 @@ non-removable; cap-power-off-card; pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins &wlcore_irq_pin>; - interrupts-extended = <&gic GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH - &omap5_pmx_core 0x168>; + pinctrl-0 = <&mmc3_pins>; + interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH + &omap5_pmx_core 0x16a>; #address-cells = <1>; #size-cells = <0>; wlcore: wlcore@2 { compatible = "ti,wl1271"; reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&wlcore_irq_pin>; interrupt-parent = <&gpio1>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; /* gpio 14 */ ref-clock-frequency = <26000000>; @@ -391,14 +383,23 @@ interrupt-controller; #interrupt-cells = <2>; ti,system-power-controller; + ti,mux-pad1 = <0xa1>; + ti,mux-pad2 = <0x1b>; pinctrl-names = "default"; pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>; + palmas_gpio: gpio { + compatible = "ti,palmas-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + extcon_usb3: palmas_usb { compatible = "ti,palmas-usb-vid"; ti,enable-vbus-detection; ti,enable-id-detection; ti,wakeup; + id-gpios = <&palmas_gpio 0 GPIO_ACTIVE_HIGH>; }; clk32kgaudio: palmas_clk32k@1 { diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index a9765605d53b..b153f604932a 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -11,9 +11,9 @@ model = "CompuLab CM-T54"; compatible = "compulab,omap5-cm-t54", "ti,omap5"; - memory { + memory@80000000 { device_type = "memory"; - reg = <0x80000000 0x7F000000>; /* 2048 MB */ + reg = <0 0x80000000 0 0x7f000000>; /* 2048 MB */ }; aliases { @@ -72,7 +72,7 @@ leds { compatible = "gpio-leds"; - led@1 { + led1 { label = "Heartbeat"; gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 ACT_LED */ linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts index f75ce02fb398..44e03b9be1f1 100644 --- a/arch/arm/boot/dts/omap5-igep0050.dts +++ b/arch/arm/boot/dts/omap5-igep0050.dts @@ -7,15 +7,47 @@ */ /dts-v1/; +#include <dt-bindings/input/input.h> #include "omap5-board-common.dtsi" / { model = "IGEPv5"; compatible = "isee,omap5-igep0050", "ti,omap5"; - memory { + memory@80000000 { device_type = "memory"; - reg = <0x80000000 0x7f000000>; /* 2032 MB */ + reg = <0x0 0x80000000 0 0x7f000000>; /* 2032 MB */ + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-0 = <&power_button_pin>; + pinctrl-names = "default"; + + power-button { + label = "Power Button"; + linux,code = <KEY_POWER>; + gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + led@1 { + label = "board:green:usr0"; + gpios = <&tca6416 1 0>; + default-state = "off"; + }; + led@2 { + label = "board:red:usr1"; + gpios = <&tca6416 2 0>; + default-state = "off"; + }; + led@3 { + label = "board:blue:usr1"; + gpios = <&tca6416 3 0>; + default-state = "off"; + }; }; }; @@ -58,6 +90,12 @@ OMAP5_IOPAD(0x0fa, PIN_INPUT | MUX_MODE0) /* i2c4_sda */ >; }; + + power_button_pin: pinctrl_power_button_pin { + pinctrl-single,pins = < + OMAP5_IOPAD(0x086, PIN_INPUT | MUX_MODE6) /* gpio4_118 */ + >; + }; }; &tpd12s015 { diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index a51e60518eb6..53d31a87b44b 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -13,9 +13,19 @@ model = "TI OMAP5 uEVM board"; compatible = "ti,omap5-uevm", "ti,omap5"; - memory { + memory@80000000 { device_type = "memory"; - reg = <0x80000000 0x7F000000>; /* 2032 MB */ + reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */ + }; + + leds { + compatible = "gpio-leds"; + led1 { + label = "omap5:blue:usr1"; + gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */ + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; }; }; @@ -61,3 +71,7 @@ OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */ >; }; + +&wlcore { + compatible = "ti,wl1837"; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 84c10195e79b..25262118ec3d 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -11,11 +11,9 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/omap.h> -#include "skeleton.dtsi" - / { - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; compatible = "ti,omap5"; interrupt-parent = <&wakeupgen>; @@ -92,10 +90,10 @@ compatible = "arm,cortex-a15-gic"; interrupt-controller; #interrupt-cells = <3>; - reg = <0x48211000 0x1000>, - <0x48212000 0x1000>, - <0x48214000 0x2000>, - <0x48216000 0x2000>; + reg = <0 0x48211000 0 0x1000>, + <0 0x48212000 0 0x1000>, + <0 0x48214000 0 0x2000>, + <0 0x48216000 0 0x2000>; interrupt-parent = <&gic>; }; @@ -103,7 +101,7 @@ compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu"; interrupt-controller; #interrupt-cells = <3>; - reg = <0x48281000 0x1000>; + reg = <0 0x48281000 0 0x1000>; interrupt-parent = <&gic>; }; @@ -131,11 +129,11 @@ compatible = "ti,omap5-l3-noc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0 0 0 0xc0000000>; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; - reg = <0x44000000 0x2000>, - <0x44800000 0x3000>, - <0x45000000 0x4000>; + reg = <0 0x44000000 0 0x2000>, + <0 0x44800000 0 0x3000>, + <0 0x45000000 0 0x4000>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; @@ -865,7 +863,7 @@ #size-cells = <1>; utmi-mode = <2>; ranges; - dwc3@4a030000 { + dwc3: dwc3@4a030000 { compatible = "snps,dwc3"; reg = <0x4a030000 0x10000>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, |