diff options
Diffstat (limited to 'arch/arm/kernel')
| -rw-r--r-- | arch/arm/kernel/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/kernel/entry-armv.S | 4 | ||||
| -rw-r--r-- | arch/arm/kernel/entry-header.S | 19 | ||||
| -rw-r--r-- | arch/arm/kernel/hw_breakpoint.c | 543 | ||||
| -rw-r--r-- | arch/arm/kernel/iwmmxt.S | 55 | ||||
| -rw-r--r-- | arch/arm/kernel/perf_event.c | 18 | ||||
| -rw-r--r-- | arch/arm/kernel/perf_event_v6.c | 30 | ||||
| -rw-r--r-- | arch/arm/kernel/perf_event_v7.c | 26 | ||||
| -rw-r--r-- | arch/arm/kernel/perf_event_xscale.c | 40 | ||||
| -rw-r--r-- | arch/arm/kernel/pj4-cp0.c | 94 | ||||
| -rw-r--r-- | arch/arm/kernel/ptrace.c | 4 |
11 files changed, 538 insertions, 296 deletions
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 7c33e6f29bcc..185ee822c935 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -54,6 +54,7 @@ AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312 obj-$(CONFIG_CPU_XSCALE) += xscale-cp0.o obj-$(CONFIG_CPU_XSC3) += xscale-cp0.o obj-$(CONFIG_CPU_MOHAWK) += xscale-cp0.o +obj-$(CONFIG_CPU_PJ4) += pj4-cp0.o obj-$(CONFIG_IWMMXT) += iwmmxt.o obj-$(CONFIG_CPU_HAS_PMU) += pmu.o obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 27f64489c1cb..2b46fea36c9f 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -178,6 +178,7 @@ __dabt_svc: @ @ set desired IRQ state, then call main handler @ + debug_entry r1 msr cpsr_c, r9 mov r2, sp bl do_DataAbort @@ -304,6 +305,7 @@ __pabt_svc: #else bl CPU_PABORT_HANDLER #endif + debug_entry r1 msr cpsr_c, r9 @ Maybe enable interrupts mov r2, sp @ regs bl do_PrefetchAbort @ call abort handler @@ -419,6 +421,7 @@ __dabt_usr: @ @ IRQs on, then call the main handler @ + debug_entry r1 enable_irq mov r2, sp adr lr, BSYM(ret_from_exception) @@ -683,6 +686,7 @@ __pabt_usr: #else bl CPU_PABORT_HANDLER #endif + debug_entry r1 enable_irq @ Enable interrupts mov r2, sp @ regs bl do_PrefetchAbort @ call abort handler diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index d93f976fb389..ae9464900168 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -165,6 +165,25 @@ .endm #endif /* !CONFIG_THUMB2_KERNEL */ + @ + @ Debug exceptions are taken as prefetch or data aborts. + @ We must disable preemption during the handler so that + @ we can access the debug registers safely. + @ + .macro debug_entry, fsr +#if defined(CONFIG_HAVE_HW_BREAKPOINT) && defined(CONFIG_PREEMPT) + ldr r4, =0x40f @ mask out fsr.fs + and r5, r4, \fsr + cmp r5, #2 @ debug exception + bne 1f + get_thread_info r10 + ldr r6, [r10, #TI_PREEMPT] @ get preempt count + add r11, r6, #1 @ increment it + str r11, [r10, #TI_PREEMPT] +1: +#endif + .endm + /* * These are the registers used in the syscall handler, and allow us to * have in theory up to 7 arguments to a function - r0 to r6. diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 21e3a4ab3b8c..c9f3f0467570 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -24,6 +24,7 @@ #define pr_fmt(fmt) "hw-breakpoint: " fmt #include <linux/errno.h> +#include <linux/hardirq.h> #include <linux/perf_event.h> #include <linux/hw_breakpoint.h> #include <linux/smp.h> @@ -44,6 +45,7 @@ static DEFINE_PER_CPU(struct perf_event *, wp_on_reg[ARM_MAX_WRP]); /* Number of BRP/WRP registers on this CPU. */ static int core_num_brps; +static int core_num_reserved_brps; static int core_num_wrps; /* Debug architecture version. */ @@ -52,87 +54,6 @@ static u8 debug_arch; /* Maximum supported watchpoint length. */ static u8 max_watchpoint_len; -/* Determine number of BRP registers available. */ -static int get_num_brps(void) -{ - u32 didr; - ARM_DBG_READ(c0, 0, didr); - return ((didr >> 24) & 0xf) + 1; -} - -/* Determine number of WRP registers available. */ -static int get_num_wrps(void) -{ - /* - * FIXME: When a watchpoint fires, the only way to work out which - * watchpoint it was is by disassembling the faulting instruction - * and working out the address of the memory access. - * - * Furthermore, we can only do this if the watchpoint was precise - * since imprecise watchpoints prevent us from calculating register - * based addresses. - * - * For the time being, we only report 1 watchpoint register so we - * always know which watchpoint fired. In the future we can either - * add a disassembler and address generation emulator, or we can - * insert a check to see if the DFAR is set on watchpoint exception - * entry [the ARM ARM states that the DFAR is UNKNOWN, but - * experience shows that it is set on some implementations]. - */ - -#if 0 - u32 didr, wrps; - ARM_DBG_READ(c0, 0, didr); - return ((didr >> 28) & 0xf) + 1; -#endif - - return 1; -} - -int hw_breakpoint_slots(int type) -{ - /* - * We can be called early, so don't rely on - * our static variables being initialised. - */ - switch (type) { - case TYPE_INST: - return get_num_brps(); - case TYPE_DATA: - return get_num_wrps(); - default: - pr_warning("unknown slot type: %d\n", type); - return 0; - } -} - -/* Determine debug architecture. */ -static u8 get_debug_arch(void) -{ - u32 didr; - - /* Do we implement the extended CPUID interface? */ - if (((read_cpuid_id() >> 16) & 0xf) != 0xf) { - pr_warning("CPUID feature registers not supported. " - "Assuming v6 debug is present.\n"); - return ARM_DEBUG_ARCH_V6; - } - - ARM_DBG_READ(c0, 0, didr); - return (didr >> 16) & 0xf; -} - -/* Does this core support mismatch breakpoints? */ -static int core_has_mismatch_bps(void) -{ - return debug_arch >= ARM_DEBUG_ARCH_V7_ECP14 && core_num_brps > 1; -} - -u8 arch_get_debug_arch(void) -{ - return debug_arch; -} - #define READ_WB_REG_CASE(OP2, M, VAL) \ case ((OP2 << 4) + M): \ ARM_DBG_READ(c ## M, OP2, VAL); \ @@ -210,6 +131,94 @@ static void write_wb_reg(int n, u32 val) isb(); } +/* Determine debug architecture. */ +static u8 get_debug_arch(void) +{ + u32 didr; + + /* Do we implement the extended CPUID interface? */ + if (((read_cpuid_id() >> 16) & 0xf) != 0xf) { + pr_warning("CPUID feature registers not supported. " + "Assuming v6 debug is present.\n"); + return ARM_DEBUG_ARCH_V6; + } + + ARM_DBG_READ(c0, 0, didr); + return (didr >> 16) & 0xf; +} + +u8 arch_get_debug_arch(void) +{ + return debug_arch; +} + +/* Determine number of BRP register available. */ +static int get_num_brp_resources(void) +{ + u32 didr; + ARM_DBG_READ(c0, 0, didr); + return ((didr >> 24) & 0xf) + 1; +} + +/* Does this core support mismatch breakpoints? */ +static int core_has_mismatch_brps(void) +{ + return (get_debug_arch() >= ARM_DEBUG_ARCH_V7_ECP14 && + get_num_brp_resources() > 1); +} + +/* Determine number of usable WRPs available. */ +static int get_num_wrps(void) +{ + /* + * FIXME: When a watchpoint fires, the only way to work out which + * watchpoint it was is by disassembling the faulting instruction + * and working out the address of the memory access. + * + * Furthermore, we can only do this if the watchpoint was precise + * since imprecise watchpoints prevent us from calculating register + * based addresses. + * + * Providing we have more than 1 breakpoint register, we only report + * a single watchpoint register for the time being. This way, we always + * know which watchpoint fired. In the future we can either add a + * disassembler and address generation emulator, or we can insert a + * check to see if the DFAR is set on watchpoint exception entry + * [the ARM ARM states that the DFAR is UNKNOWN, but experience shows + * that it is set on some implementations]. + */ + +#if 0 + int wrps; + u32 didr; + ARM_DBG_READ(c0, 0, didr); + wrps = ((didr >> 28) & 0xf) + 1; +#endif + int wrps = 1; + + if (core_has_mismatch_brps() && wrps >= get_num_brp_resources()) + wrps = get_num_brp_resources() - 1; + + return wrps; +} + +/* We reserve one breakpoint for each watchpoint. */ +static int get_num_reserved_brps(void) +{ + if (core_has_mismatch_brps()) + return get_num_wrps(); + return 0; +} + +/* Determine number of usable BRPs available. */ +static int get_num_brps(void) +{ + int brps = get_num_brp_resources(); + if (core_has_mismatch_brps()) + brps -= get_num_reserved_brps(); + return brps; +} + /* * In order to access the breakpoint/watchpoint control registers, * we must be running in debug monitor mode. Unfortunately, we can @@ -230,8 +239,12 @@ static int enable_monitor_mode(void) goto out; } + /* If monitor mode is already enabled, just return. */ + if (dscr & ARM_DSCR_MDBGEN) + goto out; + /* Write to the corresponding DSCR. */ - switch (debug_arch) { + switch (get_debug_arch()) { case ARM_DEBUG_ARCH_V6: case ARM_DEBUG_ARCH_V6_1: ARM_DBG_WRITE(c1, 0, (dscr | ARM_DSCR_MDBGEN)); @@ -246,15 +259,30 @@ static int enable_monitor_mode(void) /* Check that the write made it through. */ ARM_DBG_READ(c1, 0, dscr); - if (WARN_ONCE(!(dscr & ARM_DSCR_MDBGEN), - "failed to enable monitor mode.")) { + if (!(dscr & ARM_DSCR_MDBGEN)) ret = -EPERM; - } out: return ret; } +int hw_breakpoint_slots(int type) +{ + /* + * We can be called early, so don't rely on + * our static variables being initialised. + */ + switch (type) { + case TYPE_INST: + return get_num_brps(); + case TYPE_DATA: + return get_num_wrps(); + default: + pr_warning("unknown slot type: %d\n", type); + return 0; + } +} + /* * Check if 8-bit byte-address select is available. * This clobbers WRP 0. @@ -268,9 +296,6 @@ static u8 get_max_wp_len(void) if (debug_arch < ARM_DEBUG_ARCH_V7_ECP14) goto out; - if (enable_monitor_mode()) - goto out; - memset(&ctrl, 0, sizeof(ctrl)); ctrl.len = ARM_BREAKPOINT_LEN_8; ctrl_reg = encode_ctrl_reg(ctrl); @@ -290,23 +315,6 @@ u8 arch_get_max_wp_len(void) } /* - * Handler for reactivating a suspended watchpoint when the single - * step `mismatch' breakpoint is triggered. - */ -static void wp_single_step_handler(struct perf_event *bp, int unused, - struct perf_sample_data *data, - struct pt_regs *regs) -{ - perf_event_enable(counter_arch_bp(bp)->suspended_wp); - unregister_hw_breakpoint(bp); -} - -static int bp_is_single_step(struct perf_event *bp) -{ - return bp->overflow_handler == wp_single_step_handler; -} - -/* * Install a perf counter breakpoint. */ int arch_install_hw_breakpoint(struct perf_event *bp) @@ -314,30 +322,41 @@ int arch_install_hw_breakpoint(struct perf_event *bp) struct arch_hw_breakpoint *info = counter_arch_bp(bp); struct perf_event **slot, **slots; int i, max_slots, ctrl_base, val_base, ret = 0; + u32 addr, ctrl; /* Ensure that we are in monitor mode and halting mode is disabled. */ ret = enable_monitor_mode(); if (ret) goto out; + addr = info->address; + ctrl = encode_ctrl_reg(info->ctrl) | 0x1; + if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) { /* Breakpoint */ ctrl_base = ARM_BASE_BCR; val_base = ARM_BASE_BVR; - slots = __get_cpu_var(bp_on_reg); - max_slots = core_num_brps - 1; - - if (bp_is_single_step(bp)) { - info->ctrl.mismatch = 1; - i = max_slots; - slots[i] = bp; - goto setup; + slots = (struct perf_event **)__get_cpu_var(bp_on_reg); + max_slots = core_num_brps; + if (info->step_ctrl.enabled) { + /* Override the breakpoint data with the step data. */ + addr = info->trigger & ~0x3; + ctrl = encode_ctrl_reg(info->step_ctrl); } } else { /* Watchpoint */ - ctrl_base = ARM_BASE_WCR; - val_base = ARM_BASE_WVR; - slots = __get_cpu_var(wp_on_reg); + if (info->step_ctrl.enabled) { + /* Install into the reserved breakpoint region. */ + ctrl_base = ARM_BASE_BCR + core_num_brps; + val_base = ARM_BASE_BVR + core_num_brps; + /* Override the watchpoint data with the step data. */ + addr = info->trigger & ~0x3; + ctrl = encode_ctrl_reg(info->step_ctrl); + } else { + ctrl_base = ARM_BASE_WCR; + val_base = ARM_BASE_WVR; + } + slots = (struct perf_event **)__get_cpu_var(wp_on_reg); max_slots = core_num_wrps; } @@ -355,12 +374,11 @@ int arch_install_hw_breakpoint(struct perf_event *bp) goto out; } -setup: /* Setup the address register. */ - write_wb_reg(val_base + i, info->address); + write_wb_reg(val_base + i, addr); /* Setup the control register. */ - write_wb_reg(ctrl_base + i, encode_ctrl_reg(info->ctrl) | 0x1); + write_wb_reg(ctrl_base + i, ctrl); out: return ret; @@ -375,18 +393,15 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp) if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) { /* Breakpoint */ base = ARM_BASE_BCR; - slots = __get_cpu_var(bp_on_reg); - max_slots = core_num_brps - 1; - - if (bp_is_single_step(bp)) { - i = max_slots; - slots[i] = NULL; - goto reset; - } + slots = (struct perf_event **)__get_cpu_var(bp_on_reg); + max_slots = core_num_brps; } else { /* Watchpoint */ - base = ARM_BASE_WCR; - slots = __get_cpu_var(wp_on_reg); + if (info->step_ctrl.enabled) + base = ARM_BASE_BCR + core_num_brps; + else + base = ARM_BASE_WCR; + slots = (struct perf_event **)__get_cpu_var(wp_on_reg); max_slots = core_num_wrps; } @@ -403,7 +418,6 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp) if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot")) return; -reset: /* Reset the control register. */ write_wb_reg(base + i, 0); } @@ -537,12 +551,23 @@ static int arch_build_bp_info(struct perf_event *bp) return -EINVAL; } + /* + * Breakpoints must be of length 2 (thumb) or 4 (ARM) bytes. + * Watchpoints can be of length 1, 2, 4 or 8 bytes if supported + * by the hardware and must be aligned to the appropriate number of + * bytes. + */ + if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE && + info->ctrl.len != ARM_BREAKPOINT_LEN_2 && + info->ctrl.len != ARM_BREAKPOINT_LEN_4) + return -EINVAL; + /* Address */ info->address = bp->attr.bp_addr; /* Privilege */ info->ctrl.privilege = ARM_BREAKPOINT_USER; - if (arch_check_bp_in_kernelspace(bp) && !bp_is_single_step(bp)) + if (arch_check_bp_in_kernelspace(bp)) info->ctrl.privilege |= ARM_BREAKPOINT_PRIV; /* Enabled? */ @@ -561,7 +586,7 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) { struct arch_hw_breakpoint *info = counter_arch_bp(bp); int ret = 0; - u32 bytelen, max_len, offset, alignment_mask = 0x3; + u32 offset, alignment_mask = 0x3; /* Build the arch_hw_breakpoint. */ ret = arch_build_bp_info(bp); @@ -571,84 +596,85 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) /* Check address alignment. */ if (info->ctrl.len == ARM_BREAKPOINT_LEN_8) alignment_mask = 0x7; - if (info->address & alignment_mask) { - /* - * Try to fix the alignment. This may result in a length - * that is too large, so we must check for that. - */ - bytelen = get_hbp_len(info->ctrl.len); - max_len = info->ctrl.type == ARM_BREAKPOINT_EXECUTE ? 4 : - max_watchpoint_len; - - if (max_len >= 8) - offset = info->address & 0x7; - else - offset = info->address & 0x3; - - if (bytelen > (1 << ((max_len - (offset + 1)) >> 1))) { - ret = -EFBIG; - goto out; - } - - info->ctrl.len <<= offset; - info->address &= ~offset; - - pr_debug("breakpoint alignment fixup: length = 0x%x, " - "address = 0x%x\n", info->ctrl.len, info->address); + offset = info->address & alignment_mask; + switch (offset) { + case 0: + /* Aligned */ + break; + case 1: + /* Allow single byte watchpoint. */ + if (info->ctrl.len == ARM_BREAKPOINT_LEN_1) + break; + case 2: + /* Allow halfword watchpoints and breakpoints. */ + if (info->ctrl.len == ARM_BREAKPOINT_LEN_2) + break; + default: + ret = -EINVAL; + goto out; } + info->address &= ~alignment_mask; + info->ctrl.len <<= offset; + /* * Currently we rely on an overflow handler to take * care of single-stepping the breakpoint when it fires. * In the case of userspace breakpoints on a core with V7 debug, - * we can use the mismatch feature as a poor-man's hardware single-step. + * we can use the mismatch feature as a poor-man's hardware + * single-step, but this only works for per-task breakpoints. */ if (WARN_ONCE(!bp->overflow_handler && - (arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_bps()), + (arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_brps() + || !bp->hw.bp_target), "overflow handler required but none found")) { ret = -EINVAL; - goto out; } out: return ret; } -static void update_mismatch_flag(int idx, int flag) +/* + * Enable/disable single-stepping over the breakpoint bp at address addr. + */ +static void enable_single_step(struct perf_event *bp, u32 addr) { - struct perf_event *bp = __get_cpu_var(bp_on_reg[idx]); - struct arch_hw_breakpoint *info; - - if (bp == NULL) - return; + struct arch_hw_breakpoint *info = counter_arch_bp(bp); - info = counter_arch_bp(bp); + arch_uninstall_hw_breakpoint(bp); + info->step_ctrl.mismatch = 1; + info->step_ctrl.len = ARM_BREAKPOINT_LEN_4; + info->step_ctrl.type = ARM_BREAKPOINT_EXECUTE; + info->step_ctrl.privilege = info->ctrl.privilege; + info->step_ctrl.enabled = 1; + info->trigger = addr; + arch_install_hw_breakpoint(bp); +} - /* Update the mismatch field to enter/exit `single-step' mode */ - if (!bp->overflow_handler && info->ctrl.mismatch != flag) { - info->ctrl.mismatch = flag; - write_wb_reg(ARM_BASE_BCR + idx, encode_ctrl_reg(info->ctrl) | 0x1); - } +static void disable_single_step(struct perf_event *bp) +{ + arch_uninstall_hw_breakpoint(bp); + counter_arch_bp(bp)->step_ctrl.enabled = 0; + arch_install_hw_breakpoint(bp); } static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs) { int i; - struct perf_event *bp, **slots = __get_cpu_var(wp_on_reg); + struct perf_event *wp, **slots; struct arch_hw_breakpoint *info; - struct perf_event_attr attr; + + slots = (struct perf_event **)__get_cpu_var(wp_on_reg); /* Without a disassembler, we can only handle 1 watchpoint. */ BUG_ON(core_num_wrps > 1); - hw_breakpoint_init(&attr); - attr.bp_addr = regs->ARM_pc & ~0x3; - attr.bp_len = HW_BREAKPOINT_LEN_4; - attr.bp_type = HW_BREAKPOINT_X; - for (i = 0; i < core_num_wrps; ++i) { rcu_read_lock(); - if (slots[i] == NULL) { + wp = slots[i]; + + if (wp == NULL) { rcu_read_unlock(); continue; } @@ -658,24 +684,51 @@ static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs) * single watchpoint, we can set the trigger to the lowest * possible faulting address. */ - info = counter_arch_bp(slots[i]); - info->trigger = slots[i]->attr.bp_addr; + info = counter_arch_bp(wp); + info->trigger = wp->attr.bp_addr; pr_debug("watchpoint fired: address = 0x%x\n", info->trigger); - perf_bp_event(slots[i], regs); + perf_bp_event(wp, regs); /* * If no overflow handler is present, insert a temporary * mismatch breakpoint so we can single-step over the * watchpoint trigger. */ - if (!slots[i]->overflow_handler) { - bp = register_user_hw_breakpoint(&attr, - wp_single_step_handler, - current); - counter_arch_bp(bp)->suspended_wp = slots[i]; - perf_event_disable(slots[i]); - } + if (!wp->overflow_handler) + enable_single_step(wp, instruction_pointer(regs)); + + rcu_read_unlock(); + } +} +static void watchpoint_single_step_handler(unsigned long pc) +{ + int i; + struct perf_event *wp, **slots; + struct arch_hw_breakpoint *info; + + slots = (struct perf_event **)__get_cpu_var(wp_on_reg); + + for (i = 0; i < core_num_reserved_brps; ++i) { + rcu_read_lock(); + + wp = slots[i]; + + if (wp == NULL) + goto unlock; + + info = counter_arch_bp(wp); + if (!info->step_ctrl.enabled) + goto unlock; + + /* + * Restore the original watchpoint if we've completed the + * single-step. + */ + if (info->trigger != pc) + disable_single_step(wp); + +unlock: rcu_read_unlock(); } } @@ -683,62 +736,69 @@ static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs) static void breakpoint_handler(unsigned long unknown, struct pt_regs *regs) { int i; - int mismatch; u32 ctrl_reg, val, addr; - struct perf_event *bp, **slots = __get_cpu_var(bp_on_reg); + struct perf_event *bp, **slots; struct arch_hw_breakpoint *info; struct arch_hw_breakpoint_ctrl ctrl; + slots = (struct perf_event **)__get_cpu_var(bp_on_reg); + /* The exception entry code places the amended lr in the PC. */ addr = regs->ARM_pc; + /* Check the currently installed breakpoints first. */ for (i = 0; i < core_num_brps; ++i) { rcu_read_lock(); bp = slots[i]; - if (bp == NULL) { - rcu_read_unlock(); - continue; - } + if (bp == NULL) + goto unlock; - mismatch = 0; + info = counter_arch_bp(bp); /* Check if the breakpoint value matches. */ val = read_wb_reg(ARM_BASE_BVR + i); if (val != (addr & ~0x3)) - goto unlock; + goto mismatch; /* Possible match, check the byte address select to confirm. */ ctrl_reg = read_wb_reg(ARM_BASE_BCR + i); decode_ctrl_reg(ctrl_reg, &ctrl); if ((1 << (addr & 0x3)) & ctrl.len) { - mismatch = 1; - info = counter_arch_bp(bp); info->trigger = addr; - } - -unlock: - if ((mismatch && !info->ctrl.mismatch) || bp_is_single_step(bp)) { pr_debug("breakpoint fired: address = 0x%x\n", addr); perf_bp_event(bp, regs); + if (!bp->overflow_handler) + enable_single_step(bp, addr); + goto unlock; } - update_mismatch_flag(i, mismatch); +mismatch: + /* If we're stepping a breakpoint, it can now be restored. */ + if (info->step_ctrl.enabled) + disable_single_step(bp); +unlock: rcu_read_unlock(); } + + /* Handle any pending watchpoint single-step breakpoints. */ + watchpoint_single_step_handler(addr); } /* * Called from either the Data Abort Handler [watchpoint] or the - * Prefetch Abort Handler [breakpoint]. + * Prefetch Abort Handler [breakpoint] with preemption disabled. */ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { - int ret = 1; /* Unhandled fault. */ + int ret = 0; u32 dscr; + /* We must be called with preemption disabled. */ + WARN_ON(preemptible()); + /* We only handle watchpoints and hardware breakpoints. */ ARM_DBG_READ(c1, 0, dscr); @@ -753,25 +813,47 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, watchpoint_handler(addr, regs); break; default: - goto out; + ret = 1; /* Unhandled fault. */ } - ret = 0; -out: + /* + * Re-enable preemption after it was disabled in the + * low-level exception handling code. + */ + preempt_enable(); + return ret; } /* * One-time initialisation. */ -static void __init reset_ctrl_regs(void *unused) +static void reset_ctrl_regs(void *unused) { int i; + /* + * v7 debug contains save and restore registers so that debug state + * can be maintained across low-power modes without leaving + * the debug logic powered up. It is IMPLEMENTATION DEFINED whether + * we can write to the debug registers out of reset, so we must + * unlock the OS Lock Access Register to avoid taking undefined + * instruction exceptions later on. + */ + if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) { + /* + * Unconditionally clear the lock by writing a value + * other than 0xC5ACCE55 to the access register. + */ + asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0)); + isb(); + } + if (enable_monitor_mode()) return; - for (i = 0; i < core_num_brps; ++i) { + /* We must also reset any reserved registers. */ + for (i = 0; i < core_num_brps + core_num_reserved_brps; ++i) { write_wb_reg(ARM_BASE_BCR + i, 0UL); write_wb_reg(ARM_BASE_BVR + i, 0UL); } @@ -782,45 +864,57 @@ static void __init reset_ctrl_regs(void *unused) } } +static int __cpuinit dbg_reset_notify(struct notifier_block *self, + unsigned long action, void *cpu) +{ + if (action == CPU_ONLINE) + smp_call_function_single((int)cpu, reset_ctrl_regs, NULL, 1); + return NOTIFY_OK; +} + +static struct notifier_block __cpuinitdata dbg_reset_nb = { + .notifier_call = dbg_reset_notify, +}; + static int __init arch_hw_breakpoint_init(void) { - int ret = 0; u32 dscr; debug_arch = get_debug_arch(); if (debug_arch > ARM_DEBUG_ARCH_V7_ECP14) { pr_info("debug architecture 0x%x unsupported.\n", debug_arch); - ret = -ENODEV; - goto out; + return 0; } /* Determine how many BRPs/WRPs are available. */ core_num_brps = get_num_brps(); + core_num_reserved_brps = get_num_reserved_brps(); core_num_wrps = get_num_wrps(); pr_info("found %d breakpoint and %d watchpoint registers.\n", - core_num_brps, core_num_wrps); + core_num_brps + core_num_reserved_brps, core_num_wrps); - if (core_has_mismatch_bps()) - pr_info("1 breakpoint reserved for watchpoint single-step.\n"); + if (core_num_reserved_brps) + pr_info("%d breakpoint(s) reserved for watchpoint " + "single-step.\n", core_num_reserved_brps); ARM_DBG_READ(c1, 0, dscr); if (dscr & ARM_DSCR_HDBGEN) { pr_warning("halting debug mode enabled. Assuming maximum " "watchpoint size of 4 bytes."); } else { - /* Work out the maximum supported watchpoint length. */ - max_watchpoint_len = get_max_wp_len(); - pr_info("maximum watchpoint size is %u bytes.\n", - max_watchpoint_len); - /* * Reset the breakpoint resources. We assume that a halting * debugger will leave the world in a nice state for us. */ smp_call_function(reset_ctrl_regs, NULL, 1); reset_ctrl_regs(NULL); + + /* Work out the maximum supported watchpoint length. */ + max_watchpoint_len = get_max_wp_len(); + pr_info("maximum watchpoint size is %u bytes.\n", + max_watchpoint_len); } /* Register debug fault handler. */ @@ -829,8 +923,9 @@ static int __init arch_hw_breakpoint_init(void) hook_ifault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT, "breakpoint debug exception"); -out: - return ret; + /* Register hotplug notifier. */ + register_cpu_notifier(&dbg_reset_nb); + return 0; } arch_initcall(arch_hw_breakpoint_init); diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S index b63b528f22a6..7fa3bb0d2397 100644 --- a/arch/arm/kernel/iwmmxt.S +++ b/arch/arm/kernel/iwmmxt.S @@ -19,6 +19,14 @@ #include <asm/thread_info.h> #include <asm/asm-offsets.h> +#if defined(CONFIG_CPU_PJ4) +#define PJ4(code...) code +#define XSC(code...) +#else +#define PJ4(code...) +#define XSC(code...) code +#endif + #define MMX_WR0 (0x00) #define MMX_WR1 (0x08) #define MMX_WR2 (0x10) @@ -58,11 +66,17 @@ ENTRY(iwmmxt_task_enable) - mrc p15, 0, r2, c15, c1, 0 - tst r2, #0x3 @ CP0 and CP1 accessible? + XSC(mrc p15, 0, r2, c15, c1, 0) + PJ4(mrc p15, 0, r2, c1, c0, 2) + @ CP0 and CP1 accessible? + XSC(tst r2, #0x3) + PJ4(tst r2, #0xf) movne pc, lr @ if so no business here - orr r2, r2, #0x3 @ enable access to CP0 and CP1 - mcr p15, 0, r2, c15, c1, 0 + @ enable access to CP0 and CP1 + XSC(orr r2, r2, #0x3) + XSC(mcr p15, 0, r2, c15, c1, 0) + PJ4(orr r2, r2, #0xf) + PJ4(mcr p15, 0, r2, c1, c0, 2) ldr r3, =concan_owner add r0, r10, #TI_IWMMXT_STATE @ get task Concan save area @@ -179,17 +193,26 @@ ENTRY(iwmmxt_task_disable) teqne r1, r2 @ or specified one? bne 1f @ no: quit - mrc p15, 0, r4, c15, c1, 0 - orr r4, r4, #0x3 @ enable access to CP0 and CP1 - mcr p15, 0, r4, c15, c1, 0 + @ enable access to CP0 and CP1 + XSC(mrc p15, 0, r4, c15, c1, 0) + XSC(orr r4, r4, #0xf) + XSC(mcr p15, 0, r4, c15, c1, 0) + PJ4(mrc p15, 0, r4, c1, c0, 2) + PJ4(orr r4, r4, #0x3) + PJ4(mcr p15, 0, r4, c1, c0, 2) + mov r0, #0 @ nothing to load str r0, [r3] @ no more current owner mrc p15, 0, r2, c2, c0, 0 mov r2, r2 @ cpwait bl concan_save - bic r4, r4, #0x3 @ disable access to CP0 and CP1 - mcr p15, 0, r4, c15, c1, 0 + @ disable access to CP0 and CP1 + XSC(bic r4, r4, #0x3) + XSC(mcr p15, 0, r4, c15, c1, 0) + PJ4(bic r4, r4, #0xf) + PJ4(mcr p15, 0, r4, c1, c0, 2) + mrc p15, 0, r2, c2, c0, 0 mov r2, r2 @ cpwait @@ -277,8 +300,11 @@ ENTRY(iwmmxt_task_restore) */ ENTRY(iwmmxt_task_switch) - mrc p15, 0, r1, c15, c1, 0 - tst r1, #0x3 @ CP0 and CP1 accessible? + XSC(mrc p15, 0, r1, c15, c1, 0) + PJ4(mrc p15, 0, r1, c1, c0, 2) + @ CP0 and CP1 accessible? + XSC(tst r1, #0x3) + PJ4(tst r1, #0xf) bne 1f @ yes: block them for next task ldr r2, =concan_owner @@ -287,8 +313,11 @@ ENTRY(iwmmxt_task_switch) teq r2, r3 @ next task owns it? movne pc, lr @ no: leave Concan disabled -1: eor r1, r1, #3 @ flip Concan access - mcr p15, 0, r1, c15, c1, 0 +1: @ flip Conan access + XSC(eor r1, r1, #0x3) + XSC(mcr p15, 0, r1, c15, c1, 0) + PJ4(eor r1, r1, #0xf) + PJ4(mcr p15, 0, r1, c1, c0, 2) mrc p15, 0, r1, c2, c0, 0 sub pc, lr, r1, lsr #32 @ cpwait and return diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 421a4bb88fed..624e2a5de2b3 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -32,7 +32,7 @@ static struct platform_device *pmu_device; * Hardware lock to serialize accesses to PMU registers. Needed for the * read/modify/write sequences. */ -DEFINE_SPINLOCK(pmu_lock); +static DEFINE_RAW_SPINLOCK(pmu_lock); /* * ARMv6 supports a maximum of 3 events, starting from index 1. If we add @@ -65,7 +65,7 @@ struct cpu_hw_events { */ unsigned long active_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)]; }; -DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events); +static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events); struct arm_pmu { enum arm_perf_pmu_ids id; @@ -673,17 +673,17 @@ arch_initcall(init_hw_perf_events); * This code has been adapted from the ARM OProfile support. */ struct frame_tail { - struct frame_tail *fp; - unsigned long sp; - unsigned long lr; + struct frame_tail __user *fp; + unsigned long sp; + unsigned long lr; } __attribute__((packed)); /* * Get the return address for a single stackframe and return a pointer to the * next frame tail. */ -static struct frame_tail * -user_backtrace(struct frame_tail *tail, +static struct frame_tail __user * +user_backtrace(struct frame_tail __user *tail, struct perf_callchain_entry *entry) { struct frame_tail buftail; @@ -709,10 +709,10 @@ user_backtrace(struct frame_tail *tail, void perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) { - struct frame_tail *tail; + struct frame_tail __user *tail; - tail = (struct frame_tail *)regs->ARM_fp - 1; + tail = (struct frame_tail __user *)regs->ARM_fp - 1; while (tail && !((unsigned long)tail & 0x3)) tail = user_backtrace(tail, entry); diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index 7aeb07da9076..c058bfc8532b 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -400,7 +400,7 @@ armv6pmu_write_counter(int counter, WARN_ONCE(1, "invalid counter number (%d)\n", counter); } -void +static void armv6pmu_enable_event(struct hw_perf_event *hwc, int idx) { @@ -426,12 +426,12 @@ armv6pmu_enable_event(struct hw_perf_event *hwc, * Mask out the current event and set the counter to count the event * that we're interested in. */ - spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&pmu_lock, flags); val = armv6_pmcr_read(); val &= ~mask; val |= evt; armv6_pmcr_write(val); - spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&pmu_lock, flags); } static irqreturn_t @@ -500,11 +500,11 @@ armv6pmu_start(void) { unsigned long flags, val; - spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&pmu_lock, flags); val = armv6_pmcr_read(); val |= ARMV6_PMCR_ENABLE; armv6_pmcr_write(val); - spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&pmu_lock, flags); } static void @@ -512,11 +512,11 @@ armv6pmu_stop(void) { unsigned long flags, val; - spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&pmu_lock, flags); val = armv6_pmcr_read(); val &= ~ARMV6_PMCR_ENABLE; armv6_pmcr_write(val); - spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&pmu_lock, flags); } static int @@ -570,12 +570,12 @@ armv6pmu_disable_event(struct hw_perf_event *hwc, * of ETM bus signal assertion cycles. The external reporting should * be disabled and so this should never increment. */ - spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&pmu_lock, flags); val = armv6_pmcr_read(); val &= ~mask; val |= evt; armv6_pmcr_write(val); - spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&pmu_lock, flags); } static void @@ -599,12 +599,12 @@ armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc, * Unlike UP ARMv6, we don't have a way of stopping the counters. We * simply disable the interrupt reporting. */ - spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&pmu_lock, flags); val = armv6_pmcr_read(); val &= ~mask; val |= evt; armv6_pmcr_write(val); - spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&pmu_lock, flags); } static const struct arm_pmu armv6pmu = { @@ -625,7 +625,7 @@ static const struct arm_pmu armv6pmu = { .max_period = (1LLU << 32) - 1, }; -const struct arm_pmu *__init armv6pmu_init(void) +static const struct arm_pmu *__init armv6pmu_init(void) { return &armv6pmu; } @@ -655,17 +655,17 @@ static const struct arm_pmu armv6mpcore_pmu = { .max_period = (1LLU << 32) - 1, }; -const struct arm_pmu *__init armv6mpcore_pmu_init(void) +static const struct arm_pmu *__init armv6mpcore_pmu_init(void) { return &armv6mpcore_pmu; } #else -const struct arm_pmu *__init armv6pmu_init(void) +static const struct arm_pmu *__init armv6pmu_init(void) { return NULL; } -const struct arm_pmu *__init armv6mpcore_pmu_init(void) +static const struct arm_pmu *__init armv6mpcore_pmu_init(void) { return NULL; } diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 4d0423969df9..2e1402556fa0 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -681,7 +681,7 @@ static void armv7_pmnc_dump_regs(void) } #endif -void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) +static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) { unsigned long flags; @@ -689,7 +689,7 @@ void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) * Enable counter and interrupt, and set the counter to count * the event that we're interested in. */ - spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&pmu_lock, flags); /* * Disable counter @@ -713,7 +713,7 @@ void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) */ armv7_pmnc_enable_counter(idx); - spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&pmu_lock, flags); } static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx) @@ -723,7 +723,7 @@ static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx) /* * Disable counter and interrupt */ - spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&pmu_lock, flags); /* * Disable counter @@ -735,7 +735,7 @@ static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx) */ armv7_pmnc_disable_intens(idx); - spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&pmu_lock, flags); } static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) @@ -805,20 +805,20 @@ static void armv7pmu_start(void) { unsigned long flags; - spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&pmu_lock, flags); /* Enable all counters */ armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E); - spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&pmu_lock, flags); } static void armv7pmu_stop(void) { unsigned long flags; - spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&pmu_lock, flags); /* Disable all counters */ armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E); - spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&pmu_lock, flags); } static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc, @@ -874,7 +874,7 @@ static u32 __init armv7_reset_read_pmnc(void) return nb_cnt + 1; } -const struct arm_pmu *__init armv7_a8_pmu_init(void) +static const struct arm_pmu *__init armv7_a8_pmu_init(void) { armv7pmu.id = ARM_PERF_PMU_ID_CA8; armv7pmu.name = "ARMv7 Cortex-A8"; @@ -884,7 +884,7 @@ const struct arm_pmu *__init armv7_a8_pmu_init(void) return &armv7pmu; } -const struct arm_pmu *__init armv7_a9_pmu_init(void) +static const struct arm_pmu *__init armv7_a9_pmu_init(void) { armv7pmu.id = ARM_PERF_PMU_ID_CA9; armv7pmu.name = "ARMv7 Cortex-A9"; @@ -894,12 +894,12 @@ const struct arm_pmu *__init armv7_a9_pmu_init(void) return &armv7pmu; } #else -const struct arm_pmu *__init armv7_a8_pmu_init(void) +static const struct arm_pmu *__init armv7_a8_pmu_init(void) { return NULL; } -const struct arm_pmu *__init armv7_a9_pmu_init(void) +static const struct arm_pmu *__init armv7_a9_pmu_init(void) { return NULL; } diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index 4e9592789d40..28cd3b025bc3 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -291,12 +291,12 @@ xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx) return; } - spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&pmu_lock, flags); val = xscale1pmu_read_pmnc(); val &= ~mask; val |= evt; xscale1pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&pmu_lock, flags); } static void @@ -322,12 +322,12 @@ xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx) return; } - spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&pmu_lock, flags); val = xscale1pmu_read_pmnc(); val &= ~mask; val |= evt; xscale1pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&pmu_lock, flags); } static int @@ -355,11 +355,11 @@ xscale1pmu_start(void) { unsigned long flags, val; - spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&pmu_lock, flags); val = xscale1pmu_read_pmnc(); val |= XSCALE_PMU_ENABLE; xscale1pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&pmu_lock, flags); } static void @@ -367,11 +367,11 @@ xscale1pmu_stop(void) { unsigned long flags, val; - spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&pmu_lock, flags); val = xscale1pmu_read_pmnc(); val &= ~XSCALE_PMU_ENABLE; xscale1pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&pmu_lock, flags); } static inline u32 @@ -428,7 +428,7 @@ static const struct arm_pmu xscale1pmu = { .max_period = (1LLU << 32) - 1, }; -const struct arm_pmu *__init xscale1pmu_init(void) +static const struct arm_pmu *__init xscale1pmu_init(void) { return &xscale1pmu; } @@ -635,10 +635,10 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) return; } - spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&pmu_lock, flags); xscale2pmu_write_event_select(evtsel); xscale2pmu_write_int_enable(ien); - spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&pmu_lock, flags); } static void @@ -678,10 +678,10 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) return; } - spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&pmu_lock, flags); xscale2pmu_write_event_select(evtsel); xscale2pmu_write_int_enable(ien); - spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&pmu_lock, flags); } static int @@ -705,11 +705,11 @@ xscale2pmu_start(void) { unsigned long flags, val; - spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&pmu_lock, flags); val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64; val |= XSCALE_PMU_ENABLE; xscale2pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&pmu_lock, flags); } static void @@ -717,11 +717,11 @@ xscale2pmu_stop(void) { unsigned long flags, val; - spin_lock_irqsave(&pmu_lock, flags); + raw_spin_lock_irqsave(&pmu_lock, flags); val = xscale2pmu_read_pmnc(); val &= ~XSCALE_PMU_ENABLE; xscale2pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); + raw_spin_unlock_irqrestore(&pmu_lock, flags); } static inline u32 @@ -790,17 +790,17 @@ static const struct arm_pmu xscale2pmu = { .max_period = (1LLU << 32) - 1, }; -const struct arm_pmu *__init xscale2pmu_init(void) +static const struct arm_pmu *__init xscale2pmu_init(void) { return &xscale2pmu; } #else -const struct arm_pmu *__init xscale1pmu_init(void) +static const struct arm_pmu *__init xscale1pmu_init(void) { return NULL; } -const struct arm_pmu *__init xscale2pmu_init(void) +static const struct arm_pmu *__init xscale2pmu_init(void) { return NULL; } diff --git a/arch/arm/kernel/pj4-cp0.c b/arch/arm/kernel/pj4-cp0.c new file mode 100644 index 000000000000..a4b1b0748fd3 --- /dev/null +++ b/arch/arm/kernel/pj4-cp0.c @@ -0,0 +1,94 @@ +/* + * linux/arch/arm/kernel/pj4-cp0.c + * + * PJ4 iWMMXt coprocessor context switching and handling + * + * Copyright (c) 2010 Marvell International Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/io.h> +#include <asm/thread_notify.h> + +static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t) +{ + struct thread_info *thread = t; + + switch (cmd) { + case THREAD_NOTIFY_FLUSH: + /* + * flush_thread() zeroes thread->fpstate, so no need + * to do anything here. + * + * FALLTHROUGH: Ensure we don't try to overwrite our newly + * initialised state information on the first fault. + */ + + case THREAD_NOTIFY_EXIT: + iwmmxt_task_release(thread); + break; + + case THREAD_NOTIFY_SWITCH: + iwmmxt_task_switch(thread); + break; + } + + return NOTIFY_DONE; +} + +static struct notifier_block iwmmxt_notifier_block = { + .notifier_call = iwmmxt_do, +}; + + +static u32 __init pj4_cp_access_read(void) +{ + u32 value; + + __asm__ __volatile__ ( + "mrc p15, 0, %0, c1, c0, 2\n\t" + : "=r" (value)); + return value; +} + +static void __init pj4_cp_access_write(u32 value) +{ + u32 temp; + + __asm__ __volatile__ ( + "mcr p15, 0, %1, c1, c0, 2\n\t" + "mrc p15, 0, %0, c1, c0, 2\n\t" + "mov %0, %0\n\t" + "sub pc, pc, #4\n\t" + : "=r" (temp) : "r" (value)); +} + + +/* + * Disable CP0/CP1 on boot, and let call_fpe() and the iWMMXt lazy + * switch code handle iWMMXt context switching. + */ +static int __init pj4_cp0_init(void) +{ + u32 cp_access; + + cp_access = pj4_cp_access_read() & ~0xf; + pj4_cp_access_write(cp_access); + + printk(KERN_INFO "PJ4 iWMMXt coprocessor enabled.\n"); + elf_hwcap |= HWCAP_IWMMXT; + thread_register_notifier(&iwmmxt_notifier_block); + + return 0; +} + +late_initcall(pj4_cp0_init); diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 3e97483abcf0..19c6816db61e 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -1060,8 +1060,8 @@ static int ptrace_sethbpregs(struct task_struct *tsk, long num, goto out; if ((gen_type & implied_type) != gen_type) { - ret = -EINVAL; - goto out; + ret = -EINVAL; + goto out; } attr.bp_len = gen_len; |