4 files changed, 15 insertions, 102 deletions

diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index a075b3e0c5c7..626d2b82d0f3 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -214,11 +214,6 @@ config DA850_WL12XX
 	  Say Y if you want to use a wl1271 expansion card connected to the
 	  AM18x EVM.
 
-config GPIO_PCA953X
-	default MACH_DAVINCI_DA850_EVM
-
-config KEYBOARD_GPIO_POLLED
-	default MACH_DAVINCI_DA850_EVM
 
 config MACH_TNETV107X
 	bool "TI TNETV107X Reference Platform"
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 987605b78556..3de4dc9a1698 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -799,11 +799,12 @@ static __init void davinci_evm_init(void)
 	/* irlml6401 switches over 1A, in under 8 msec */
 	davinci_setup_usb(1000, 8);
 
-	soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID;
-	/* Register the fixup for PHY on DaVinci */
-	phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
-					davinci_phy_fixup);
-
+	if (IS_BUILTIN(CONFIG_PHYLIB)) {
+		soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID;
+		/* Register the fixup for PHY on DaVinci */
+		phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
+						davinci_phy_fixup);
+	}
 }
 
 MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 2ab00434b2eb..85399c98f84a 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -472,7 +472,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK("spi_davinci.0",	NULL,		&spi0_clk),
 	CLK("spi_davinci.1",	NULL,		&spi1_clk),
 	CLK("vpif",		NULL,		&vpif_clk),
-	CLK("ahci",		NULL,		&sata_clk),
+	CLK("ahci_da850",		NULL,		&sata_clk),
 	CLK("davinci-rproc.0",	NULL,		&dsp_clk),
 	CLK("ehrpwm",		"fck",		&ehrpwm_clk),
 	CLK("ehrpwm",		"tbclk",	&ehrpwm_tbclk),
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 0486cdf28c8d..56ea41d5f849 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -1020,7 +1020,6 @@ int __init da8xx_register_spi_bus(int instance, unsigned num_chipselect)
 }
 
 #ifdef CONFIG_ARCH_DAVINCI_DA850
-
 static struct resource da850_sata_resources[] = {
 	{
 		.start	= DA850_SATA_BASE,
@@ -1028,103 +1027,22 @@ static struct resource da850_sata_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
+		.start	= DA8XX_SYSCFG1_BASE + DA8XX_PWRDN_REG,
+		.end	= DA8XX_SYSCFG1_BASE + DA8XX_PWRDN_REG + 0x3,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
 		.start	= IRQ_DA850_SATAINT,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
-/* SATA PHY Control Register offset from AHCI base */
-#define SATA_P0PHYCR_REG	0x178
-
-#define SATA_PHY_MPY(x)		((x) << 0)
-#define SATA_PHY_LOS(x)		((x) << 6)
-#define SATA_PHY_RXCDR(x)	((x) << 10)
-#define SATA_PHY_RXEQ(x)	((x) << 13)
-#define SATA_PHY_TXSWING(x)	((x) << 19)
-#define SATA_PHY_ENPLL(x)	((x) << 31)
-
-static struct clk *da850_sata_clk;
-static unsigned long da850_sata_refclkpn;
-
-/* Supported DA850 SATA crystal frequencies */
-#define KHZ_TO_HZ(freq) ((freq) * 1000)
-static unsigned long da850_sata_xtal[] = {
-	KHZ_TO_HZ(300000),
-	KHZ_TO_HZ(250000),
-	0,			/* Reserved */
-	KHZ_TO_HZ(187500),
-	KHZ_TO_HZ(150000),
-	KHZ_TO_HZ(125000),
-	KHZ_TO_HZ(120000),
-	KHZ_TO_HZ(100000),
-	KHZ_TO_HZ(75000),
-	KHZ_TO_HZ(60000),
-};
-
-static int da850_sata_init(struct device *dev, void __iomem *addr)
-{
-	int i, ret;
-	unsigned int val;
-
-	da850_sata_clk = clk_get(dev, NULL);
-	if (IS_ERR(da850_sata_clk))
-		return PTR_ERR(da850_sata_clk);
-
-	ret = clk_prepare_enable(da850_sata_clk);
-	if (ret)
-		goto err0;
-
-	/* Enable SATA clock receiver */
-	val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
-	val &= ~BIT(0);
-	__raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
-
-	/* Get the multiplier needed for 1.5GHz PLL output */
-	for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++)
-		if (da850_sata_xtal[i] == da850_sata_refclkpn)
-			break;
-
-	if (i == ARRAY_SIZE(da850_sata_xtal)) {
-		ret = -EINVAL;
-		goto err1;
-	}
-
-	val = SATA_PHY_MPY(i + 1) |
-		SATA_PHY_LOS(1) |
-		SATA_PHY_RXCDR(4) |
-		SATA_PHY_RXEQ(1) |
-		SATA_PHY_TXSWING(3) |
-		SATA_PHY_ENPLL(1);
-
-	__raw_writel(val, addr + SATA_P0PHYCR_REG);
-
-	return 0;
-
-err1:
-	clk_disable_unprepare(da850_sata_clk);
-err0:
-	clk_put(da850_sata_clk);
-	return ret;
-}
-
-static void da850_sata_exit(struct device *dev)
-{
-	clk_disable_unprepare(da850_sata_clk);
-	clk_put(da850_sata_clk);
-}
-
-static struct ahci_platform_data da850_sata_pdata = {
-	.init	= da850_sata_init,
-	.exit	= da850_sata_exit,
-};
-
 static u64 da850_sata_dmamask = DMA_BIT_MASK(32);
 
 static struct platform_device da850_sata_device = {
-	.name	= "ahci",
+	.name	= "ahci_da850",
 	.id	= -1,
 	.dev	= {
-		.platform_data		= &da850_sata_pdata,
 		.dma_mask		= &da850_sata_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 	},
@@ -1134,9 +1052,8 @@ static struct platform_device da850_sata_device = {
 
 int __init da850_register_sata(unsigned long refclkpn)
 {
-	da850_sata_refclkpn = refclkpn;
-	if (!da850_sata_refclkpn)
-		return -EINVAL;
+	/* please see comment in drivers/ata/ahci_da850.c */
+	BUG_ON(refclkpn != 100 * 1000 * 1000);
 
 	return platform_device_register(&da850_sata_device);
 }