diff options
Diffstat (limited to 'arch/arm/mach-imx/Kconfig')
| -rw-r--r-- | arch/arm/mach-imx/Kconfig | 302 |
1 files changed, 302 insertions, 0 deletions
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig new file mode 100644 index 000000000000..17d2e608a214 --- /dev/null +++ b/arch/arm/mach-imx/Kconfig @@ -0,0 +1,302 @@ +config IMX_HAVE_DMA_V1 + bool + +config SOC_IMX1 + bool + select CPU_ARM920T + select IMX_HAVE_DMA_V1 + select IMX_HAVE_IOMUX_V1 + select MXC_AVIC + +config SOC_IMX21 + bool + select CPU_ARM926T + select ARCH_MXC_AUDMUX_V1 + select IMX_HAVE_DMA_V1 + select IMX_HAVE_IOMUX_V1 + select MXC_AVIC + +config SOC_IMX25 + bool + select CPU_ARM926T + select ARCH_MXC_AUDMUX_V2 + select ARCH_MXC_IOMUX_V3 + select MXC_AVIC + +config SOC_IMX27 + bool + select CPU_ARM926T + select ARCH_MXC_AUDMUX_V1 + select IMX_HAVE_DMA_V1 + select IMX_HAVE_IOMUX_V1 + select MXC_AVIC + +if ARCH_MX1 + +comment "MX1 platforms:" +config MACH_MXLADS + bool + +config ARCH_MX1ADS + bool "MX1ADS platform" + select MACH_MXLADS + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + help + Say Y here if you are using Motorola MX1ADS/MXLADS boards + +config MACH_SCB9328 + bool "Synertronixx scb9328" + select IMX_HAVE_PLATFORM_IMX_UART + help + Say Y here if you are using a Synertronixx scb9328 board + +endif + +if ARCH_MX2 + +choice + prompt "CPUs:" + default MACH_MX21 + +config MACH_MX21 + bool "i.MX21 support" + help + This enables support for Freescale's MX2 based i.MX21 processor. + +config MACH_MX27 + bool "i.MX27 support" + help + This enables support for Freescale's MX2 based i.MX27 processor. + +endchoice + +endif + +if MACH_MX21 + +comment "MX21 platforms:" + +config MACH_MX21ADS + bool "MX21ADS platform" + select SOC_IMX21 + select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MXC_NAND + help + Include support for MX21ADS platform. This includes specific + configurations for the board and its peripherals. + +endif + +if ARCH_MX25 + +comment "MX25 platforms:" + +config MACH_MX25_3DS + bool "Support MX25PDK (3DS) Platform" + select SOC_IMX25 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMXDI_RTC + select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + +config MACH_EUKREA_CPUIMX25 + bool "Support Eukrea CPUIMX25 Platform" + select SOC_IMX25 + select IMX_HAVE_PLATFORM_FLEXCAN + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMXDI_RTC + select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select MXC_ULPI if USB_ULPI + +choice + prompt "Baseboard" + depends on MACH_EUKREA_CPUIMX25 + default MACH_EUKREA_MBIMXSD25_BASEBOARD + +config MACH_EUKREA_MBIMXSD25_BASEBOARD + bool "Eukrea MBIMXSD development board" + select IMX_HAVE_PLATFORM_IMX_SSI + help + This adds board specific devices that can be found on Eukrea's + MBIMXSD evaluation board. + +endchoice + +endif + +if MACH_MX27 + +comment "MX27 platforms:" + +config MACH_MX27ADS + bool "MX27ADS platform" + select SOC_IMX27 + select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_W1 + help + Include support for MX27ADS platform. This includes specific + configurations for the board and its peripherals. + +config MACH_PCM038 + bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" + select SOC_IMX27 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_W1 + select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_ULPI if USB_ULPI + help + Include support for phyCORE-i.MX27 (aka pcm038) platform. This + includes specific configurations for the module and its peripherals. + +choice + prompt "Baseboard" + depends on MACH_PCM038 + default MACH_PCM970_BASEBOARD + +config MACH_PCM970_BASEBOARD + bool "PHYTEC PCM970 development board" + select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_MXC_MMC + help + This adds board specific devices that can be found on Phytec's + PCM970 evaluation board. + +endchoice + +config MACH_CPUIMX27 + bool "Eukrea CPUIMX27 module" + select SOC_IMX27 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_W1 + select MXC_ULPI if USB_ULPI + help + Include support for Eukrea CPUIMX27 platform. This includes + specific configurations for the module and its peripherals. + +config MACH_EUKREA_CPUIMX27_USESDHC2 + bool "CPUIMX27 integrates SDHC2 module" + depends on MACH_CPUIMX27 + select IMX_HAVE_PLATFORM_MXC_MMC + help + This adds support for the internal SDHC2 used on CPUIMX27 + for wifi or eMMC. + +config MACH_EUKREA_CPUIMX27_USEUART4 + bool "CPUIMX27 integrates UART4 module" + depends on MACH_CPUIMX27 + help + This adds support for the internal UART4 used on CPUIMX27 + for bluetooth. + +choice + prompt "Baseboard" + depends on MACH_CPUIMX27 + default MACH_EUKREA_MBIMX27_BASEBOARD + +config MACH_EUKREA_MBIMX27_BASEBOARD + bool "Eukrea MBIMX27 development board" + select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_IMX_SSI + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_SPI_IMX + help + This adds board specific devices that can be found on Eukrea's + MBIMX27 evaluation board. + +endchoice + +config MACH_MX27_3DS + bool "MX27PDK platform" + select SOC_IMX27 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_ULPI if USB_ULPI + help + Include support for MX27PDK platform. This includes specific + configurations for the board and its peripherals. + +config MACH_IMX27_VISSTRIM_M10 + bool "Vista Silicon i.MX27 Visstrim_m10" + select SOC_IMX27 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MXC_EHCI + help + Include support for Visstrim_m10 platform and its different variants. + This includes specific configurations for the board and its + peripherals. + +config MACH_IMX27LITE + bool "LogicPD MX27 LITEKIT platform" + select SOC_IMX27 + select IMX_HAVE_PLATFORM_IMX_UART + help + Include support for MX27 LITEKIT platform. This includes specific + configurations for the board and its peripherals. + +config MACH_PCA100 + bool "Phytec phyCARD-s (pca100)" + select SOC_IMX27 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_W1 + select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_ULPI if USB_ULPI + help + Include support for phyCARD-s (aka pca100) platform. This + includes specific configurations for the module and its peripherals. + +config MACH_MXT_TD60 + bool "Maxtrack i-MXT TD60" + select SOC_IMX27 + select IMX_HAVE_PLATFORM_IMX_FB + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MXC_NAND + help + Include support for i-MXT (aka td60) platform. This + includes specific configurations for the module and its peripherals. + +endif |