diff options
Diffstat (limited to 'arch/arm/mach-imx')
| -rw-r--r-- | arch/arm/mach-imx/Makefile | 15 | ||||
| -rw-r--r-- | arch/arm/mach-imx/cache-l2x0.c | 56 | ||||
| -rw-r--r-- | arch/arm/mach-imx/mach-armadillo5x0.c | 18 | ||||
| -rw-r--r-- | arch/arm/mach-imx/mach-cpuimx35.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-imx/mach-kzm_arm11_01.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-imx/mach-mx1ads.c | 15 | ||||
| -rw-r--r-- | arch/arm/mach-imx/mach-mx27_3ds.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-imx/mach-pcm038.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-imx/mach-qong.c | 5 | ||||
| -rw-r--r-- | arch/arm/mach-imx/mach-vpr200.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-imx/mm-imx3.c | 256 | ||||
| -rw-r--r-- | arch/arm/mach-imx/mm-imx31.c | 91 | ||||
| -rw-r--r-- | arch/arm/mach-imx/mm-imx35.c | 109 | ||||
| -rw-r--r-- | arch/arm/mach-imx/pm-imx27.c | 2 |
14 files changed, 287 insertions, 291 deletions
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index e9eb36dad888..6cc821384ccd 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -1,16 +1,15 @@ obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o -obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o -obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o +obj-$(CONFIG_SOC_IMX1) += clock-imx1.o mm-imx1.o +obj-$(CONFIG_SOC_IMX21) += clock-imx21.o mm-imx21.o -obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o ehci-imx25.o +obj-$(CONFIG_SOC_IMX25) += clock-imx25.o mm-imx25.o ehci-imx25.o -obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o -obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o ehci-imx27.o +obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o +obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o -obj-$(CONFIG_SOC_IMX31) += mm-imx31.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o -obj-$(CONFIG_SOC_IMX35) += mm-imx35.o cpu-imx35.o clock-imx35.o ehci-imx35.o -obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o +obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o +obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o # Support for CMOS sensor interface obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o diff --git a/arch/arm/mach-imx/cache-l2x0.c b/arch/arm/mach-imx/cache-l2x0.c deleted file mode 100644 index 69d1322add3c..000000000000 --- a/arch/arm/mach-imx/cache-l2x0.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Copyright (C) 2009-2010 Pengutronix - * Sascha Hauer <s.hauer@pengutronix.de> - * Juergen Beisert <j.beisert@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/err.h> -#include <linux/kernel.h> - -#include <asm/hardware/cache-l2x0.h> - -#include <mach/hardware.h> - -static int mxc_init_l2x0(void) -{ - void __iomem *l2x0_base; - void __iomem *clkctl_base; - - if (!cpu_is_mx31() && !cpu_is_mx35()) - return 0; - -/* - * First of all, we must repair broken chip settings. There are some - * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These - * misconfigured CPUs will run amok immediately when the L2 cache gets enabled. - * Workaraound is to setup the correct register setting prior enabling the - * L2 cache. This should not hurt already working CPUs, as they are using the - * same value. - */ -#define L2_MEM_VAL 0x10 - - clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096); - if (clkctl_base != NULL) { - writel(0x00000515, clkctl_base + L2_MEM_VAL); - iounmap(clkctl_base); - } else { - pr_err("L2 cache: Cannot fix timing. Trying to continue without\n"); - } - - l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096); - if (IS_ERR(l2x0_base)) { - printk(KERN_ERR "remapping L2 cache area failed with %ld\n", - PTR_ERR(l2x0_base)); - return 0; - } - - l2x0_init(l2x0_base, 0x00030024, 0x00000000); - - return 0; -} -arch_initcall(mxc_init_l2x0); diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index 215259083945..fa2b97df5846 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -314,25 +314,19 @@ static struct mtd_partition armadillo5x0_nor_flash_partitions[] = { }, }; -static struct physmap_flash_data armadillo5x0_nor_flash_pdata = { +static const struct physmap_flash_data + armadillo5x0_nor_flash_pdata __initconst = { .width = 2, .parts = armadillo5x0_nor_flash_partitions, .nr_parts = ARRAY_SIZE(armadillo5x0_nor_flash_partitions), }; -static struct resource armadillo5x0_nor_flash_resource = { +static const struct resource armadillo5x0_nor_flash_resource __initconst = { .flags = IORESOURCE_MEM, .start = MX31_CS0_BASE_ADDR, .end = MX31_CS0_BASE_ADDR + SZ_64M - 1, }; -static struct platform_device armadillo5x0_nor_flash = { - .name = "physmap-flash", - .id = -1, - .num_resources = 1, - .resource = &armadillo5x0_nor_flash_resource, -}; - /* * FB support */ @@ -514,8 +508,10 @@ static void __init armadillo5x0_init(void) imx31_add_mx3_sdc_fb(&mx3fb_pdata); /* Register NOR Flash */ - mxc_register_device(&armadillo5x0_nor_flash, - &armadillo5x0_nor_flash_pdata); + platform_device_register_resndata(NULL, "physmap-flash", -1, + &armadillo5x0_nor_flash_resource, 1, + &armadillo5x0_nor_flash_pdata, + sizeof(armadillo5x0_nor_flash_pdata)); /* Register NAND Flash */ imx31_add_mxc_nand(&armadillo5x0_nand_board_info); diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 470b654b0e6e..ea6c9c3468a6 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -66,7 +66,7 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { I2C_BOARD_INFO("tsc2007", 0x48), .type = "tsc2007", .platform_data = &tsc2007_info, - .irq = gpio_to_irq(TSC2007_IRQGPIO), + .irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO), }, }; diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index 7c20e9e58006..4e030ac58847 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -36,6 +36,7 @@ #include <mach/clock.h> #include <mach/common.h> +#include <mach/hardware.h> #include <mach/iomux-mx3.h> #include "devices-imx31.h" diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 530ea08dbafd..b4a5e0382634 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -68,23 +68,16 @@ static const struct imxuart_platform_data uart1_pdata __initconst = { * Physmap flash */ -static struct physmap_flash_data mx1ads_flash_data = { +static const struct physmap_flash_data mx1ads_flash_data __initconst = { .width = 4, /* bankwidth in bytes */ }; -static struct resource flash_resource = { +static const struct resource flash_resource __initconst = { .start = MX1_CS0_PHYS, .end = MX1_CS0_PHYS + SZ_32M - 1, .flags = IORESOURCE_MEM, }; -static struct platform_device flash_device = { - .name = "physmap-flash", - .id = 0, - .resource = &flash_resource, - .num_resources = 1, -}; - /* * I2C */ @@ -125,7 +118,9 @@ static void __init mx1ads_init(void) imx1_add_imx_uart1(&uart1_pdata); /* Physmap flash */ - mxc_register_device(&flash_device, &mx1ads_flash_data); + platform_device_register_resndata(NULL, "physmap-flash", 0, + &flash_resource, 1, + &mx1ads_flash_data, sizeof(mx1ads_flash_data)); /* I2C */ i2c_register_board_info(0, mx1ads_i2c_devices, diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 377230497dcc..04bc86de2c57 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -357,7 +357,7 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { .bus_num = 1, .chip_select = 0, /* SS0 */ .platform_data = &mc13783_pdata, - .irq = gpio_to_irq(PMIC_INT), + .irq = IMX_GPIO_TO_IRQ(PMIC_INT), .mode = SPI_CS_HIGH, }, { .modalias = "l4f00242t03", diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 091bcf87e1a0..a497a2997002 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -176,7 +176,9 @@ static struct platform_device *platform_devices[] __initdata = { * setup other stuffs to access the sram. */ static void __init pcm038_init_sram(void) { - mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00); + __raw_writel(0x0000d843, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(1))); + __raw_writel(0x22252521, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(1))); + __raw_writel(0x22220a00, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(1))); } static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = { diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 9e11359c324c..c33ab00845f6 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -190,7 +190,10 @@ static struct platform_device qong_nand_device = { static void __init qong_init_nand_mtd(void) { /* init CS */ - mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800); + __raw_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3))); + __raw_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3))); + __raw_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3))); + mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true); /* enable pin */ diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index 7d8e012a6335..5250283479e7 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -162,7 +162,7 @@ static struct i2c_board_info vpr200_i2c_devices[] = { }, { I2C_BOARD_INFO("mc13892", 0x08), .platform_data = &vpr200_pmic, - .irq = gpio_to_irq(GPIO_PMIC_INT), + .irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT), } }; diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c new file mode 100644 index 000000000000..9f0e82ec3398 --- /dev/null +++ b/arch/arm/mach-imx/mm-imx3.c @@ -0,0 +1,256 @@ +/* + * Copyright (C) 1999,2000 Arm Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * - add MX31 specific definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/err.h> + +#include <asm/pgtable.h> +#include <asm/hardware/cache-l2x0.h> +#include <asm/mach/map.h> + +#include <mach/common.h> +#include <mach/devices-common.h> +#include <mach/hardware.h> +#include <mach/iomux-v3.h> +#include <mach/irqs.h> + +static void imx3_idle(void) +{ + unsigned long reg = 0; + __asm__ __volatile__( + /* disable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "bic %0, %0, #0x00001000\n" + "bic %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + /* invalidate I cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c5, 0\n" + /* clear and invalidate D cache */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c14, 0\n" + /* WFI */ + "mov %0, #0\n" + "mcr p15, 0, %0, c7, c0, 4\n" + "nop\n" "nop\n" "nop\n" "nop\n" + "nop\n" "nop\n" "nop\n" + /* enable I and D cache */ + "mrc p15, 0, %0, c1, c0, 0\n" + "orr %0, %0, #0x00001000\n" + "orr %0, %0, #0x00000004\n" + "mcr p15, 0, %0, c1, c0, 0\n" + : "=r" (reg)); +} + +static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size, + unsigned int mtype) +{ + if (mtype == MT_DEVICE) { + /* + * Access all peripherals below 0x80000000 as nonshared device + * on mx3, but leave l2cc alone. Otherwise cache corruptions + * can occur. + */ + if (phys_addr < 0x80000000 && + !addr_in_module(phys_addr, MX3x_L2CC)) + mtype = MT_DEVICE_NONSHARED; + } + + return __arm_ioremap(phys_addr, size, mtype); +} + +void imx3_init_l2x0(void) +{ + void __iomem *l2x0_base; + void __iomem *clkctl_base; + +/* + * First of all, we must repair broken chip settings. There are some + * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These + * misconfigured CPUs will run amok immediately when the L2 cache gets enabled. + * Workaraound is to setup the correct register setting prior enabling the + * L2 cache. This should not hurt already working CPUs, as they are using the + * same value. + */ +#define L2_MEM_VAL 0x10 + + clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096); + if (clkctl_base != NULL) { + writel(0x00000515, clkctl_base + L2_MEM_VAL); + iounmap(clkctl_base); + } else { + pr_err("L2 cache: Cannot fix timing. Trying to continue without\n"); + } + + l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096); + if (IS_ERR(l2x0_base)) { + printk(KERN_ERR "remapping L2 cache area failed with %ld\n", + PTR_ERR(l2x0_base)); + return; + } + + l2x0_init(l2x0_base, 0x00030024, 0x00000000); +} + +static struct map_desc mx31_io_desc[] __initdata = { + imx_map_entry(MX31, X_MEMC, MT_DEVICE), + imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED), + imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED), + imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED), + imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED), +}; + +/* + * This function initializes the memory map. It is called during the + * system startup to create static physical to virtual memory mappings + * for the IO modules. + */ +void __init mx31_map_io(void) +{ + iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc)); +} + +static struct map_desc mx35_io_desc[] __initdata = { + imx_map_entry(MX35, X_MEMC, MT_DEVICE), + imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED), + imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED), +}; + +void __init mx35_map_io(void) +{ + iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc)); +} + +void __init imx31_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MX31); + mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); + imx_idle = imx3_idle; + imx_ioremap = imx3_ioremap; +} + +void __init imx35_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MX35); + mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); + mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); + imx_idle = imx3_idle; + imx_ioremap = imx3_ioremap; +} + +void __init mx31_init_irq(void) +{ + mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR)); +} + +void __init mx35_init_irq(void) +{ + mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); +} + +static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = { + .per_2_per_addr = 1677, +}; + +static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = { + .ap_2_ap_addr = 423, + .ap_2_bp_addr = 829, + .bp_2_ap_addr = 1029, +}; + +static struct sdma_platform_data imx31_sdma_pdata __initdata = { + .fw_name = "sdma-imx31-to2.bin", + .script_addrs = &imx31_to2_sdma_script, +}; + +void __init imx31_soc_init(void) +{ + int to_version = mx31_revision() >> 4; + + imx3_init_l2x0(); + + mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0); + mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0); + mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0); + + if (to_version == 1) { + strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin", + strlen(imx31_sdma_pdata.fw_name)); + imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script; + } + + imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata); +} + +static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = { + .ap_2_ap_addr = 642, + .uart_2_mcu_addr = 817, + .mcu_2_app_addr = 747, + .uartsh_2_mcu_addr = 1183, + .per_2_shp_addr = 1033, + .mcu_2_shp_addr = 961, + .ata_2_mcu_addr = 1333, + .mcu_2_ata_addr = 1252, + .app_2_mcu_addr = 683, + .shp_2_per_addr = 1111, + .shp_2_mcu_addr = 892, +}; + +static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = { + .ap_2_ap_addr = 729, + .uart_2_mcu_addr = 904, + .per_2_app_addr = 1597, + .mcu_2_app_addr = 834, + .uartsh_2_mcu_addr = 1270, + .per_2_shp_addr = 1120, + .mcu_2_shp_addr = 1048, + .ata_2_mcu_addr = 1429, + .mcu_2_ata_addr = 1339, + .app_2_per_addr = 1531, + .app_2_mcu_addr = 770, + .shp_2_per_addr = 1198, + .shp_2_mcu_addr = 979, +}; + +static struct sdma_platform_data imx35_sdma_pdata __initdata = { + .fw_name = "sdma-imx35-to2.bin", + .script_addrs = &imx35_to2_sdma_script, +}; + +void __init imx35_soc_init(void) +{ + int to_version = mx35_revision() >> 4; + + imx3_init_l2x0(); + + /* i.mx35 has the i.mx31 type gpio */ + mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0); + mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0); + mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0); + + if (to_version == 1) { + strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin", + strlen(imx35_sdma_pdata.fw_name)); + imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script; + } + + imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata); +} diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c deleted file mode 100644 index b7c55e7db000..000000000000 --- a/arch/arm/mach-imx/mm-imx31.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Copyright (C) 1999,2000 Arm Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - add MX31 specific definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/err.h> - -#include <asm/pgtable.h> -#include <asm/mach/map.h> - -#include <mach/common.h> -#include <mach/devices-common.h> -#include <mach/hardware.h> -#include <mach/iomux-v3.h> -#include <mach/irqs.h> - -static struct map_desc mx31_io_desc[] __initdata = { - imx_map_entry(MX31, X_MEMC, MT_DEVICE), - imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED), - imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED), - imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED), - imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED), -}; - -/* - * This function initializes the memory map. It is called during the - * system startup to create static physical to virtual memory mappings - * for the IO modules. - */ -void __init mx31_map_io(void) -{ - iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc)); -} - -void __init imx31_init_early(void) -{ - mxc_set_cpu_type(MXC_CPU_MX31); - mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); -} - -void __init mx31_init_irq(void) -{ - mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR)); -} - -static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = { - .per_2_per_addr = 1677, -}; - -static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = { - .ap_2_ap_addr = 423, - .ap_2_bp_addr = 829, - .bp_2_ap_addr = 1029, -}; - -static struct sdma_platform_data imx31_sdma_pdata __initdata = { - .fw_name = "sdma-imx31-to2.bin", - .script_addrs = &imx31_to2_sdma_script, -}; - -void __init imx31_soc_init(void) -{ - int to_version = mx31_revision() >> 4; - - mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0); - mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0); - mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0); - - if (to_version == 1) { - strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin", - strlen(imx31_sdma_pdata.fw_name)); - imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script; - } - - imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata); -} diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c deleted file mode 100644 index f49bac7a1ede..000000000000 --- a/arch/arm/mach-imx/mm-imx35.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * Copyright (C) 1999,2000 Arm Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - add MX31 specific definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/err.h> - -#include <asm/pgtable.h> -#include <asm/mach/map.h> -#include <asm/hardware/cache-l2x0.h> - -#include <mach/common.h> -#include <mach/devices-common.h> -#include <mach/hardware.h> -#include <mach/iomux-v3.h> -#include <mach/irqs.h> - -static struct map_desc mx35_io_desc[] __initdata = { - imx_map_entry(MX35, X_MEMC, MT_DEVICE), - imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED), - imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED), - imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED), - imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED), -}; - -void __init mx35_map_io(void) -{ - iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc)); -} - -void __init imx35_init_early(void) -{ - mxc_set_cpu_type(MXC_CPU_MX35); - mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); - mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); -} - -void __init mx35_init_irq(void) -{ - mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); -} - -static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = { - .ap_2_ap_addr = 642, - .uart_2_mcu_addr = 817, - .mcu_2_app_addr = 747, - .uartsh_2_mcu_addr = 1183, - .per_2_shp_addr = 1033, - .mcu_2_shp_addr = 961, - .ata_2_mcu_addr = 1333, - .mcu_2_ata_addr = 1252, - .app_2_mcu_addr = 683, - .shp_2_per_addr = 1111, - .shp_2_mcu_addr = 892, -}; - -static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = { - .ap_2_ap_addr = 729, - .uart_2_mcu_addr = 904, - .per_2_app_addr = 1597, - .mcu_2_app_addr = 834, - .uartsh_2_mcu_addr = 1270, - .per_2_shp_addr = 1120, - .mcu_2_shp_addr = 1048, - .ata_2_mcu_addr = 1429, - .mcu_2_ata_addr = 1339, - .app_2_per_addr = 1531, - .app_2_mcu_addr = 770, - .shp_2_per_addr = 1198, - .shp_2_mcu_addr = 979, -}; - -static struct sdma_platform_data imx35_sdma_pdata __initdata = { - .fw_name = "sdma-imx35-to2.bin", - .script_addrs = &imx35_to2_sdma_script, -}; - -void __init imx35_soc_init(void) -{ - int to_version = mx35_revision() >> 4; - - /* i.mx35 has the i.mx31 type gpio */ - mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0); - mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0); - mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0); - - if (to_version == 1) { - strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin", - strlen(imx35_sdma_pdata.fw_name)); - imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script; - } - - imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata); -} diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c index acf17691d2cc..e455d2f855bf 100644 --- a/arch/arm/mach-imx/pm-imx27.c +++ b/arch/arm/mach-imx/pm-imx27.c @@ -11,7 +11,7 @@ #include <linux/suspend.h> #include <linux/io.h> #include <mach/system.h> -#include <mach/mx27.h> +#include <mach/hardware.h> static int mx27_suspend_enter(suspend_state_t state) { |