diff options
Diffstat (limited to 'arch/arm/mach-iop3xx/iop321-pci.c')
| -rw-r--r-- | arch/arm/mach-iop3xx/iop321-pci.c | 220 |
1 files changed, 220 insertions, 0 deletions
diff --git a/arch/arm/mach-iop3xx/iop321-pci.c b/arch/arm/mach-iop3xx/iop321-pci.c new file mode 100644 index 000000000000..8ba6a0e23134 --- /dev/null +++ b/arch/arm/mach-iop3xx/iop321-pci.c @@ -0,0 +1,220 @@ +/* + * arch/arm/mach-iop3xx/iop321-pci.c + * + * PCI support for the Intel IOP321 chipset + * + * Author: Rory Bolt <rorybolt@pacbell.net> + * Copyright (C) 2002 Rory Bolt + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/ioport.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/hardware.h> +#include <asm/mach/pci.h> + +#include <asm/arch/iop321.h> + +// #define DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) do { } while (0) +#endif + +/* + * This routine builds either a type0 or type1 configuration command. If the + * bus is on the 80321 then a type0 made, else a type1 is created. + */ +static u32 iop321_cfg_address(struct pci_bus *bus, int devfn, int where) +{ + struct pci_sys_data *sys = bus->sysdata; + u32 addr; + + if (sys->busnr == bus->number) + addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11); + else + addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1; + + addr |= PCI_FUNC(devfn) << 8 | (where & ~3); + + return addr; +} + +/* + * This routine checks the status of the last configuration cycle. If an error + * was detected it returns a 1, else it returns a 0. The errors being checked + * are parity, master abort, target abort (master and target). These types of + * errors occure during a config cycle where there is no device, like during + * the discovery stage. + */ +static int iop321_pci_status(void) +{ + unsigned int status; + int ret = 0; + + /* + * Check the status registers. + */ + status = *IOP321_ATUSR; + if (status & 0xf900) + { + DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status); + *IOP321_ATUSR = status & 0xf900; + ret = 1; + } + status = *IOP321_ATUISR; + if (status & 0x679f) + { + DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status); + *IOP321_ATUISR = status & 0x679f; + ret = 1; + } + return ret; +} + +/* + * Simply write the address register and read the configuration + * data. Note that the 4 nop's ensure that we are able to handle + * a delayed abort (in theory.) + */ +static inline u32 iop321_read(unsigned long addr) +{ + u32 val; + + __asm__ __volatile__( + "str %1, [%2]\n\t" + "ldr %0, [%3]\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + : "=r" (val) + : "r" (addr), "r" (IOP321_OCCAR), "r" (IOP321_OCCDR)); + + return val; +} + +/* + * The read routines must check the error status of the last configuration + * cycle. If there was an error, the routine returns all hex f's. + */ +static int +iop321_read_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *value) +{ + unsigned long addr = iop321_cfg_address(bus, devfn, where); + u32 val = iop321_read(addr) >> ((where & 3) * 8); + + if( iop321_pci_status() ) + val = 0xffffffff; + + *value = val; + + return PCIBIOS_SUCCESSFUL; +} + +static int +iop321_write_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 value) +{ + unsigned long addr = iop321_cfg_address(bus, devfn, where); + u32 val; + + if (size != 4) { + val = iop321_read(addr); + if (!iop321_pci_status() == 0) + return PCIBIOS_SUCCESSFUL; + + where = (where & 3) * 8; + + if (size == 1) + val &= ~(0xff << where); + else + val &= ~(0xffff << where); + + *IOP321_OCCDR = val | value << where; + } else { + asm volatile( + "str %1, [%2]\n\t" + "str %0, [%3]\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + : + : "r" (value), "r" (addr), + "r" (IOP321_OCCAR), "r" (IOP321_OCCDR)); + } + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops iop321_ops = { + .read = iop321_read_config, + .write = iop321_write_config, +}; + +/* + * When a PCI device does not exist during config cycles, the 80200 gets a + * bus error instead of returning 0xffffffff. This handler simply returns. + */ +int +iop321_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) +{ + DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n", + addr, fsr, regs->ARM_pc, regs->ARM_lr); + + /* + * If it was an imprecise abort, then we need to correct the + * return address to be _after_ the instruction. + */ + if (fsr & (1 << 10)) + regs->ARM_pc += 4; + + return 0; +} + +/* + * Scan an IOP321 PCI bus. sys->bus defines which bus we scan. + */ +struct pci_bus *iop321_scan_bus(int nr, struct pci_sys_data *sys) +{ + return pci_scan_bus(sys->busnr, &iop321_ops, sys); +} + +void iop321_init(void) +{ + DBG("PCI: Intel 80321 PCI init code.\n"); + DBG("ATU: IOP321_ATUCMD=0x%04x\n", *IOP321_ATUCMD); + DBG("ATU: IOP321_OMWTVR0=0x%04x, IOP321_OIOWTVR=0x%04x\n", + *IOP321_OMWTVR0, + *IOP321_OIOWTVR); + DBG("ATU: IOP321_ATUCR=0x%08x\n", *IOP321_ATUCR); + DBG("ATU: IOP321_IABAR0=0x%08x IOP321_IALR0=0x%08x IOP321_IATVR0=%08x\n", + *IOP321_IABAR0, *IOP321_IALR0, *IOP321_IATVR0); + DBG("ATU: IOP321_OMWTVR0=0x%08x\n", *IOP321_OMWTVR0); + DBG("ATU: IOP321_IABAR1=0x%08x IOP321_IALR1=0x%08x\n", + *IOP321_IABAR1, *IOP321_IALR1); + DBG("ATU: IOP321_ERBAR=0x%08x IOP321_ERLR=0x%08x IOP321_ERTVR=%08x\n", + *IOP321_ERBAR, *IOP321_ERLR, *IOP321_ERTVR); + DBG("ATU: IOP321_IABAR2=0x%08x IOP321_IALR2=0x%08x IOP321_IATVR2=%08x\n", + *IOP321_IABAR2, *IOP321_IALR2, *IOP321_IATVR2); + DBG("ATU: IOP321_IABAR3=0x%08x IOP321_IALR3=0x%08x IOP321_IATVR3=%08x\n", + *IOP321_IABAR3, *IOP321_IALR3, *IOP321_IATVR3); + + hook_fault_code(16+6, iop321_pci_abort, SIGBUS, "imprecise external abort"); +} + |