diff options
Diffstat (limited to 'arch/arm/mach-kirkwood/board-dt.c')
-rw-r--r-- | arch/arm/mach-kirkwood/board-dt.c | 151 |
1 files changed, 23 insertions, 128 deletions
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index fbe6405602ed..1c672d9e6656 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -3,7 +3,7 @@ * * arch/arm/mach-kirkwood/board-dt.c * - * Marvell DreamPlug Reference Board Setup + * Flattened Device Tree board initialization * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -12,150 +12,45 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/partitions.h> -#include <linux/ata_platform.h> -#include <linux/mv643xx_eth.h> #include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> -#include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <linux/spi/orion_spi.h> -#include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/kirkwood.h> -#include <plat/mvsdio.h> +#include <asm/mach/map.h> +#include <mach/bridge-regs.h> #include "common.h" -#include "mpp.h" static struct of_device_id kirkwood_dt_match_table[] __initdata = { { .compatible = "simple-bus", }, { } }; -struct mtd_partition dreamplug_partitions[] = { - { - .name = "u-boot", - .size = SZ_512K, - .offset = 0, - }, - { - .name = "u-boot env", - .size = SZ_64K, - .offset = SZ_512K + SZ_512K, - }, - { - .name = "dtb", - .size = SZ_64K, - .offset = SZ_512K + SZ_512K + SZ_512K, - }, -}; - -static const struct flash_platform_data dreamplug_spi_slave_data = { - .type = "mx25l1606e", - .name = "spi_flash", - .parts = dreamplug_partitions, - .nr_parts = ARRAY_SIZE(dreamplug_partitions), -}; - -static struct spi_board_info __initdata dreamplug_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &dreamplug_spi_slave_data, - .irq = -1, - .max_speed_hz = 50000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -static struct mv643xx_eth_platform_data dreamplug_ge00_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(0), -}; - -static struct mv643xx_eth_platform_data dreamplug_ge01_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(1), -}; - -static struct mv_sata_platform_data dreamplug_sata_data = { - .n_ports = 1, -}; - -static struct mvsdio_platform_data dreamplug_mvsdio_data = { - /* unfortunately the CD signal has not been connected */ -}; - -static struct gpio_led dreamplug_led_pins[] = { - { - .name = "dreamplug:blue:bluetooth", - .gpio = 47, - .active_low = 1, - }, - { - .name = "dreamplug:green:wifi", - .gpio = 48, - .active_low = 1, - }, - { - .name = "dreamplug:green:wifi_ap", - .gpio = 49, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data dreamplug_led_data = { - .leds = dreamplug_led_pins, - .num_leds = ARRAY_SIZE(dreamplug_led_pins), -}; - -static struct platform_device dreamplug_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &dreamplug_led_data, - } -}; - -static unsigned int dreamplug_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP47_GPIO, /* Bluetooth LED */ - MPP48_GPIO, /* Wifi LED */ - MPP49_GPIO, /* Wifi AP LED */ - 0 -}; - -static void __init dreamplug_init(void) +static void __init kirkwood_dt_init(void) { + pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk); + /* - * Basic setup. Needs to be called early. + * Disable propagation of mbus errors to the CPU local bus, + * as this causes mbus errors (which can occur for example + * for PCI aborts) to throw CPU aborts, which we're not set + * up to deal with. */ - kirkwood_mpp_conf(dreamplug_mpp_config); + writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); - spi_register_board_info(dreamplug_spi_slave_info, - ARRAY_SIZE(dreamplug_spi_slave_info)); - kirkwood_spi_init(); + kirkwood_setup_cpu_mbus(); - kirkwood_ehci_init(); - kirkwood_ge00_init(&dreamplug_ge00_data); - kirkwood_ge01_init(&dreamplug_ge01_data); - kirkwood_sata_init(&dreamplug_sata_data); - kirkwood_sdio_init(&dreamplug_mvsdio_data); +#ifdef CONFIG_CACHE_FEROCEON_L2 + kirkwood_l2_init(); +#endif - platform_device_register(&dreamplug_leds); -} + /* internal devices that every board has */ + kirkwood_wdt_init(); + kirkwood_xor0_init(); + kirkwood_xor1_init(); + kirkwood_crypto_init(); -static void __init kirkwood_dt_init(void) -{ - kirkwood_init(); +#ifdef CONFIG_KEXEC + kexec_reinit = kirkwood_enable_pcie; +#endif if (of_machine_is_compatible("globalscale,dreamplug")) dreamplug_init(); |