diff options
Diffstat (limited to 'arch/arm/mach-lpc32xx')
| -rw-r--r-- | arch/arm/mach-lpc32xx/irq.c | 7 | ||||
| -rw-r--r-- | arch/arm/mach-lpc32xx/phy3250.c | 20 |
2 files changed, 18 insertions, 9 deletions
diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c index 5b1cc35e6fba..3c6332753358 100644 --- a/arch/arm/mach-lpc32xx/irq.c +++ b/arch/arm/mach-lpc32xx/irq.c @@ -283,21 +283,25 @@ static int lpc32xx_set_irq_type(struct irq_data *d, unsigned int type) case IRQ_TYPE_EDGE_RISING: /* Rising edge sensitive */ __lpc32xx_set_irq_type(d->hwirq, 1, 1); + __irq_set_handler_locked(d->hwirq, handle_edge_irq); break; case IRQ_TYPE_EDGE_FALLING: /* Falling edge sensitive */ __lpc32xx_set_irq_type(d->hwirq, 0, 1); + __irq_set_handler_locked(d->hwirq, handle_edge_irq); break; case IRQ_TYPE_LEVEL_LOW: /* Low level sensitive */ __lpc32xx_set_irq_type(d->hwirq, 0, 0); + __irq_set_handler_locked(d->hwirq, handle_level_irq); break; case IRQ_TYPE_LEVEL_HIGH: /* High level sensitive */ __lpc32xx_set_irq_type(d->hwirq, 1, 0); + __irq_set_handler_locked(d->hwirq, handle_level_irq); break; /* Other modes are not supported */ @@ -305,9 +309,6 @@ static int lpc32xx_set_irq_type(struct irq_data *d, unsigned int type) return -EINVAL; } - /* Ok to use the level handler for all types */ - irq_set_handler(d->hwirq, handle_level_irq); - return 0; } diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index b07dcc90829d..8f2a2f8712d7 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -37,6 +37,8 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/clk.h> +#include <linux/mtd/lpc32xx_slc.h> +#include <linux/mtd/lpc32xx_mlc.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -223,6 +225,14 @@ static struct mmci_platform_data lpc32xx_mmci_data = { * gather, and the MMCI driver doesn't do it this way */ }; +static struct lpc32xx_slc_platform_data lpc32xx_slc_data = { + .dma_filter = pl08x_filter_id, +}; + +static struct lpc32xx_mlc_platform_data lpc32xx_mlc_data = { + .dma_filter = pl08x_filter_id, +}; + static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", &lpc32xx_ssp0_data), OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", &lpc32xx_ssp1_data), @@ -230,6 +240,10 @@ static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd), OF_DEV_AUXDATA("arm,pl18x", 0x20098000, "20098000.sd", &lpc32xx_mmci_data), + OF_DEV_AUXDATA("nxp,lpc3220-slc", 0x20020000, "20020000.flash", + &lpc32xx_slc_data), + OF_DEV_AUXDATA("nxp,lpc3220-mlc", 0x200a8000, "200a8000.flash", + &lpc32xx_mlc_data), { } }; @@ -253,12 +267,6 @@ static void __init lpc3250_machine_init(void) of_platform_populate(NULL, of_default_bus_match_table, lpc32xx_auxdata_lookup, NULL); - - /* Register GPIOs used on this board */ - if (gpio_request(MMC_PWR_ENABLE_GPIO, "mmc_power_en")) - pr_err("Error requesting gpio %u", MMC_PWR_ENABLE_GPIO); - else if (gpio_direction_output(MMC_PWR_ENABLE_GPIO, 1)) - pr_err("Error setting gpio %u to output", MMC_PWR_ENABLE_GPIO); } static char const *lpc32xx_dt_compat[] __initdata = { |